A.1.1 Spectrum Analyzer SOW.pdf
PDF 179 KB Posted
- Attached to
- Spectrum Analyzers Federal contract opportunity
- Solicitation number
- DJA-22-ASOD-PR-0274
About this file
This statement of work outlines requirements for spectrum analyzers and accessories to support investigations conducted by the Bureau of Alcohol, Tobacco, Firearms and Explosives. The Bureau requires twenty-five handheld, portable spectrum analyzers with adjustable resolution bandwidth, video bandwidth, frequency span, and demodulation capabilities. Analyzers must operate from battery or USB power for at least two hours. Required accessories include carrying cases, power cables, antennas, and USB cables. Training and a one-year warranty are also specified. Deliverables must be received within six months of award at the Bureau's office in Sterling, Virginia. The statement of work provides inspection, acceptance criteria, and data rights requirements and references Bureau security policies that must be followed.
View the file
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
THE BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES
STATEMENT OF WORK
Spectrum Analyzers
1.1 Background
As part of its mission, the Technical Operations Branch (TOB) supports all Technical Operations Officers and Technical Surveillance Specialists (TOO/TSS) that install and maintain Radio Frequency (RF) transmitters and receivers in support of investigations and covert surveillance operations conducted by ATF Special Agents. Spectrum Analyzers are vital instruments used to identify RF interference that may degrade covert surveillance video evidence collection during surveillance operations. TOO/TSS’s continuously install RF surveillance equipment to support investigations, the equipment must be configured to avoid RF interference in various locations throughout the United States.
The TOB has a requirement for one (25) Spectrum Analyzers with Accessories. The Spectrum Analyzers must be handheld and portable, capable of operating from battery or USB power from laptop when required.
1.2 Scope
The contractor shall provide twenty-five (25) Spectrum Analyzers with Accessories with the following minimum technical specifications:
Frequency Range At least 9KHz to 6.2 GHz
Antenna Connectors N-Type connector or include adapters for N-type connector
Adjustable Resolution Band Width (RBW) Adjustable RBW from 100 Hz to 1 MHz
Video Bandwidth (VBW) Adjustable VBW from 3Hz to 1 MHz
Frequency Span Adjustable frequency span from
Power: 120/220 VAC.
Mobile Power Capable of operating from battery power for at least 2 hours or operating from common USB power from laptop (5VDC)
Basic Vector Analysis Functions Amplitude, frequency, phase vs. time
Demodulation types Able to perform demodulation of AM and FM signals
Audio Must have headphone output to allow user to listen to various signals
Antenna Basic Whip Antenna included
Software Markers Markers available to allow users to mark signal on the screen.
Training
Live introduction to Spectrum Analyzer usage included (Virtual training preferred) to be conducted within 6 months of delivery
- Two courses of 15 Students (Class time to be determined by vendor/instructor)
- Familiarize students on basic use of spectrum analyzer functions and capabilities.
Portable Units must be handheld and portable Warranty At least one year warranty from date of delivery.
Optional Five-year calibration service
The following shall be provided:
Quantity Description
1 Accessory Kit The Accessory Kits to include the following items:
1. Carrying case (hard or soft)
2. Power cables to power Spectrum Analyzer from 110VAC (US power)
3. Basic whip antenna
4. USB cable to connect handheld Spectrum Analyzer to computer
1.3 Required Delivery Date/Location
The required delivery date shall be no later than six (6) months from date of award.
Contractor shall provide all shipment as Freight on Board (FOB) Destination to the Technical Operations Branch (TOB), 45250 West Severn Way, Suite 104, Sterling, VA 20166.
Delivery shall be coordinated with the Government prior to arrival.
1.4 Inspection and Acceptance
Inspection/Acceptance. Supplies or services delivered under this contract shall be inspected and accepted by the COR. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance in accordance with the appropriate inspection and acceptance clause.
The basis for acceptance shall be compliance with the Requirements/objectives/constraints set forth in the contract, and other terms and conditions of the contract. Deliverable items rejected shall be corrected in accordance with the applicable clauses.
Acceptance Criteria. The COR will review all draft and final deliverables to ensure accuracy, functionality, completeness, professional quality, and overall compliance within the guidelines/requirements of the delivery order. The contractor shall ensure the accuracy and completeness of all deliverables. Errors, misleading or unclear statements, incomplete or irrelevant information, and or excessive rhetoric, repetition, and “padding”, shall be considered deficiencies and shall be subject to correction by the contractor, at no additional cost to the Government. The contractor shall make any noted corrections/revisions, within 5 business days, after government review and comment on deliverables. If the deliverable does not meet the noted criteria, the Government will return it.
Rejection Procedures. If the COR rejects any deliverable, that rejected document will be handled in the following manner:
After notification that the deliverable did not meet the acceptance criteria, the Contractor shall resubmit an updated/corrected version within five (5) business days after receipt of Government comments.
Upon re-submission by the Contractor, the Government will reapply the same acceptance criteria. If the deliverable does not meet the acceptance criteria a second time, the Government might consider the Contractor as having deficient performance with respect to the subject task/subtask.
Any rework of rejected deliverables will be completed at no additional cost to the government.
No payments will be issued against rejected deliverables, until they are corrected and accepted by the government.
1.5 ATF Polices, Procedures and Standards
The contractor shall conform to the following ATF guidelines, security requirements, and federal regulation and legislation throughout the life of the contract. ATF reserves the right to amend/upgrade these standards and internal guidelines, processes and procedures based on technological advances.
a. Minimum Database Security Requirements as prescribed by the ATF Information Systems Security Office (ATF ISSO)
b. NIST Special Publication 800-53
c. ATF Publication, 7500.1 Rules of Behavior and Customer Agreement for ATF Workstation Users
d. Section 508 of the Rehabilitation Act (29 U.S.C. 794d), Subpart B – Technical Standards, 1194.21, Software Applications and Operating Systems, and 1194.22, Web-based Intranet and Internet Information and Applications, as it applies to this requirement.
1.6 Conformity to Section 508 of the Rehabilitation Act
The Contractor shall conform to Section 508 of the Rehabilitation Act. As part of the Workforce Investment Act of 1998, the U.S. Congress re-authorized Section 508 of the Rehabilitation Act, strengthening it by establishing accessibility standards. The reauthorization dictates that Federal agencies are required to ensure that all electronic and information technology purchased, maintained, or developed meet the new accessibility standards.
All information systems shall be compatible with existing technology and software. Section 508 Standards have been incorporated into the Federal Acquisition Regulation (FAR), 29 U.S.C. & 794d.
1.7 Data Rights
All materials, databases, software modules, Source Code, graphics, etc. inclusively developed and used in support of this contract shall become the property of ATF.
THE BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES
File details come from the government source that posted it. Updated .