8. DRAFT PD.pdf

1 | 3

PURCHASE DESCRIPTION

TCS Mobile Antenna System Model 2400M-8

1. INTRODUCTION

The Naval Surface Warfare Center (NSWC), Corona Division, Performance Assessment Department, Code PA44 requires two (2) portable L/S band mobile tracking antenna systems used on the ADVANCED TELEMETRY SYSTEM - CLASSIFIED/UNCLASSIFIED (ATS-C/U) in support of MDA/BMD missions.

2. BACKGROUND

The NSWC Telemetry Systems Branch (PA44) facility at Corona has a requirement to provide a telemetry system capable of supporting in support of MDA/BMD missions. In order to meet this requirement, Naval Surface Warfare Center (NSWC), Corona Division, Performance Assessment Department, Code PA44 requires the TCS Mobile Antenna System Model 2400M-8 as listed in the Requirements. The specifications listed are a hard requirement in order to successfully execute the missions on the schedule for this project at the level of excellence expected of us by our customers.

3. REQUIREMENTS

The contractor shall provide all of the CLINs listed below:

CLIN Part Number Description Quantity 0001 Model 2400M-8 Mobile Telemetry Antenna System Model 2400M-8

LS-Band 2 Each

0002 Spare L/S-Band Feed

Spare L/S Band Conical Scanning Prime Focus Feed providing dual simultaneous circular left and right hand polarizations, with cellular rejection (1435-1850 MHz, and 2200-2400 MHz)

1 Each

0003 ACU Upgrade ACU Upgrade PN 300110-J1148S3 to RH 8- ACU I/F PCB Upgrade, and Hardware Upgrade

2 Each

0004 1 Day Training at Corona

1 Day of training provided by TCS personnel at Corona 1 Day

Detailed Salient Characteristics to be confirmed in offers/proposals:

CLIN 0001:

2 | 3

Mobile Telemetry Antenna System Model 2400M‐8 LS-Band (PN: Model 2400M-8). Item shall include all of the following:

- Antenna Control Unit, ACU‐M1L, IRIG Card

- Model 2400M Pedestal, Continuous AZ. Travel

- Slip Ring & 2‐Chnl RJ with Air

- Riser Extension for 8‐ft System

- Tripod Assembly

- Sectional 8‐ft, Composite Reflector, Edges Straps

- LS‐Band Feed with Cell Reject

- HD‐SDI Video Camera and 16” 1U Rack Mount Display, Video over Fiber

- Feed Dehydrator, Pedestal Dehumidifier & Heaters

- Universal Power Input, 115 to 220 50/60 Hz VAC

- LMR 400 RF Cables, 4X 100’ Long Each

- Multi‐Mode Control Fiber, 1X 250’ Long

- Power Cable, 1X 50’ Long

- Seven (7) each Plastic Transit Cases Set (with Foam Inserts) for Model 2400M‐8 &

Accessories,

- Interlocking and Stackable

- O&M Manual and Documentation

- PDR Using MS Teams

- Factory ATP

- Shipping to destination in California

For Shipboard Deployment, the 2400M‐X Antenna System can be integrated with GFE Ellipse PN ELLIPSE2‐E‐G4A2‐B1 IMU & Hemisphere V133 Differential GPS.

Note: CLIN 0001 Antenna System modular cases must fit on two standard (48”x40”x56”) pallets.

CLIN 0004:

Contractor shall provide a (1) day training session provided by TCS personnel onboard NSWC Corona. Contractor shall include the travel and labor expenses to meet the requirement.

Contractor must submit SECNAV 5512 for base access vetting purposes. Technician/specialist, engineer, and/or any other Contractor personnel must obtain a favorable background investigation to access the work site located at NSWC Corona Division, 1999 Fourth St., Norco, CA 92860.

Note: Background investigation takes (10) business days to complete. Result of background investigation will dictate schedule.

Contractor shall provide proof of reseller authorization and capability statement explaining how they will meet the requirement (if applicable).

3 | 3

ADDITIONAL INFORMATION

A. PERIOD OF PERFORMANCE / REQUIRED DELIVERY DATES

B. PLACE OF PERFORMANCE

C. SHIPPING ADDRESS

D. INSPECTION AND ACCEPTANCE

E. TECHNICAL POINT OF CONTACT

TBD

TBD, Norco, CA 92860