7910-00-267-1205

REQUEST FOR QUOTATIONS

(THIS IS NOT AN ORDER)

1 | 47

UNDER BDSA REG. 2 (

RATING

EXIGENCY Requirement

AND/OR DMS REG. 1

Federal Acquisition Service (QSDLAD)

819 Taylor Street (6A00)

Ft. Worth, TX 76102-6114

ALSO SEE BLOCK 11

alan.craig@gsa.gov

( FOB DESTINATION ( OTHER

(See Schedule)

NUMBER

850-8238

9. DESTINATION

SEE BELOW

SEE BLOCK 11

(See Schedule)

a. NAME

b. COMPANY

b. STREET ADDRESS

SEE BLOCK 11

c. STREET ADDRESS

c. CITY

SEE BLOCK 11

SEE BLOCK 11

e. ZIP

SEE BLOCK 11

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK BY COB

(Date) May 25, 2011 or sooner

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5A. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or service. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

ITEM NO.

(a)

SUPPLIES/SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

1.

FPN-B-G2588-1

7910-00-267-1205 Electric Vacuum Cleaner Suffolk, VA. 23435-5000 (See attached description on pages 3-4)

NOTE: Destination Inspection.

*INDICATE YOUR BEST DELIVERY TIME BELOW: DELIVERY: _________________________

A. Award will be made in the aggregate by NSN, and based on the lowest price technically acceptable offer.

B. This is only a request for pricing. Delivery orders will be issued pursuant to the evaluation of the quotations received. DO NOT SHIP.

C. If submitting a quote, please complete all applicable pages, sign, and send via email as noted above.

D. If NOT submitting a quote, please indicate “No Quote” on cover page and send via email as noted above.

E. Pricing is FOB Destination to Suffolk, VA 23435-5000.

F. Please provide your company Duns & Bradstreet Number:

G. Please provide your company Tax Identification Number:

H. Please provide your company email address:

Name:

Phone:

Fax:

Email:

I. Supplier’s Name:

Supplier’s TIN:

Supplier’s DUNS Number:

(Note: “Supplier” refers to the company providing you with product, if you are not the manufacturer).

J. Supplier’s Point of Contact:

ORIGINAL QUOTATION INCLUSIVE OF CLAUSES MUST BE RETURNED AND FILLED IN PRIOR TO AN ORDER BEING PROCESSED. All responsible sources may submit a quotation, which if timely received, shall be considered by the agency.

NOTE: Additional provisions and representations ( are ( are not attached.

c. COUNTY

AREA CODE

AUTHORIZED FOR LOCAL REPRODUCTION

STANDARD FORM 18 (Re. 6-95)

Previous edition not usable

Prescribed by GSA- FAR (48CFR) 53.215-1(a)

ITEM PURCHASE DESCRIPTION

NSN: 7910-00-267-1205

Dated: 11/30/2010

CLEANER, VACUUM, ELECTRIC: Shall be a portable, hand held, industrial type, blower-suction unit. Shall be in accordance with Commercial Item Description A-A-50438, dated March 26, 1991.

TYPE HV1 - High velocity

VOLTAGE - 115 Vac, 60 Hz, and 115 Vdc

CORD

- 50 ft.

SHOULDER STRAP - Included

ATTACHMENTS - Included

(see Table II of A-A-50438)

PORTABLE HAND HELD VACUUM/BLOWER

Image is representational and intended only as a guide.

Unit of issue shall be EA (one complete system to a package).

EXCEPTIONS TO THE SPECIFICATION:

Under the "Abstract." paragraph, immediately after the sentence ending with "...shall be of the following types:" delete the remainder of the paragraph, and substitute the following:

Type HV1 - High velocity, shall function on 115 Vac, 60 Hz, and 115 Vdc.

Type LV1 - Low velocity, shall function on 115 Vac, 60 Hz, and 115 Vdc.

Type MV1 - Medium velocity, shall function on 115 Vac, 60 Hz, and 115 Vdc.

Type MV2 - Medium velocity, shall function on 220 Vac, 50 Hz, and 220 Vdc.

Under "Salient characteristics.," delete paragraph 5, and substitute the following:

5. At normal full load operating conditions, conducted and radiated emissions shall be in compliance with the limits and measurement tolerances specified by MIL-STD-461 for CE101, CE102, and RE102.

Under "Salient characteristics.," add a new paragraph as follows:

13. Types HV1, LV1, and MV1 shall be capable of meeting the maximum air discharge requirements of Table I when tested at normal full load operating conditions at 115 Vdc and 115 Vac, 60 Hz. Type MV2 shall be capable of meeting the minimum air discharge requirement of Table I when tested at normal full load operating conditions at 220 Vdc, and 220 Vac, 50 Hz. The volumetric air discharge shall be determined by multiplying the average discharge velocity by the area of the orifice. The average discharge velocity is obtained by means of a Pitot tube, or equivalent, placed within 2 inches of the outlet; the number and arrangement of the tube positions shall be sufficient to determine the average velocity at the discharge.

Delete "Contractor certification" paragraph, substitute the following:

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this purchase description, conform to the producer’s own drawings, specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The government reserves the right to require proof of such conformance.

MARKING: Shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129.

PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. In the event a pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, “Guidelines for Regulating Wood Packaging Material in International Trade”. Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

End of Item Purchase Description

552.211-73

MARKING (FEB 1996)

(a) General requirements. Interior packages, if any, and exterior shipping containers shall be marked as specified elsewhere in the contract. Additional marking requirements may be specified on delivery orders issued under the contract. If not otherwise specified, interior packages and exterior shipping containers shall be marked in accordance with the following standards.

(1) Deliveries to civilian activities. Supplies shall be marked in accordance with Federal Standard 123, edition in effect on the date of issuance of the solicitation.

(2) Deliveries to military activities. Supplies shall be marked in accordance with Military Standard 129, edition in effect on the date of issuance of the solicitation.

(b) Improperly marked material. When Government inspection and acceptance are at destination, and delivered supplies are not marked in accordance with contract requirements, the Government has the right, without prior notice to the Contractor to perform the required marking, by contract or otherwise, and charge the Contractor, therefor at the rate specified elsewhere in this contract. This right is not exclusive, and is in addition to other rights or remedies provided for in this contract.

552.211-75

PRESERVATION, PACKAGING, AND PACKING (FEB 1996)

Unless otherwise specified, all items shall be preserved, packaged, and packed in accordance with normal commercial practices, as defined in the applicable commodity specification. Packaging and packing shall comply with the requirements of the Uniform Freight Classification and the National Motor Freight Classification (issue in effect at time of shipment) and each shipping container of each item in a shipment shall be of uniform size and content, except for residual quantities. Where special or unusual packing is specified in an order, but not specifically provided for by the contract, such packing details must be the subject of an agreement independently arrived at between the ordering agency and the Contractor.

D-FSS-456

PACKAGING AND PACKING (APR 1984)

(a) Packaging. Shall be in accordance with accepted commercial practice.

(b) Packing. Shall be packed to ensure carrier acceptance and safe delivery to the destination in containers complying with rules and regulations applicable to the mode of transportation.

D-FSS-468

NON-MANUFACTURED WOOD PACKAGING MATERIAL FOR EXPORT (MAY 2004) FSS A/L FC-01-3

Definitions:

“Packaged material, and Solid Wood Packing Material (SWPM),” for purposes of this clause, is defined as each separate and distinct material that by itself or in combination with other materials forms the container providing a means of protecting and handling a product. This includes, but is not limited to, pallets, dunnage, crating, packing blocks, drums, load boards, pallet collars, and skids.

“Non-Manufactured wood,” is also called solid wood and defined as wood packing other than that comprised wholly of wood-based products such as plywood, particle board, oriented strand board, veneer, wood wool, and similar materials, which has been created using glue, heat and pressure or a combination thereof.

IPPC Country: Countries of the European Union (EU) or any other country endorsing the International Plant Protection Convention (IPPC) “Guidelines for Regulating Wood Packaging Material in International Trade,” approved March 15, 2002. A listing of countries participating in the IPPC is found at http://www.aphis.usda.gov/ppq/swp/.

(b) Non-manufactured wood pallets and other non-manufactured wood packaging material used to pack items for delivery to or through IPPC countries must be marked and properly treated in accordance with IPPC guidelines.

(c) This requirement applies whether the shipment is direct to the end user or through a Government designated consolidation point. Packaging that does not conform to IPPC guidelines will be refused entry, destroyed or treated prior to entry.

(d) For Department of Defense distribution facilities or freight consolidation points, all non-manufactured wood pallets or packaging material with a probability of entering countries endorsing the IPPC Guidelines must be treated and marked in accordance with DLA PROCLTR 02-17 (available at http://www.dla.mil/j-3/j-336/ProcLtrs/02-17.pdf), and MIL-STD-2073-1, Standard Practice for Military Packaging (and any future revision).

(e) Pallets and packing material shipped to FSS distribution facilities designated for possible delivery to the countries endorsing the IPPC Guidelines will comply with DLA PROCLTR 02-17, and MIL-STD-2073-1.

(f) Delays in delivery caused by non-complying pallets or wood package material will not be considered as beyond the control of the Contractor. Any applicable Government expense incurred as a result of the Contractor’s failure to provide appropriate pallets or package material shall be reimbursed by the Contractor. Expenses may include the applicable cost for repackage, handling and return shipping, or the destruction of solid wood packaging material.

E-FSS-522

INSPECTION AT DESTINATION (MAR 1996)

(a) Inspection by the Government. It is anticipated that the supplies purchased under this contract will be inspected at destination by the Government to ensure conformance with technical requirements as specified herein.

(b) Responsibility for Rejected Supplies. If, after due notice of rejection, the Contractor fails to remove or provide instructions for the removal of rejected supplies pursuant to the Contracting Officer's instructions, the Contractor shall be liable for all costs incurred by the Government in taking such measures as are expedient to avoid unnecessary loss to the Contractor. In addition to any other remedies which may be available under this contract, the supplies may be stored for the Contractor's account or sold to the highest bidder on the open market and the proceeds applied against the accumulated storage and other costs, including the cost of the sale.

(c) Additional Costs for Inspection and Testing. When prior rejection makes reinspection or retesting necessary, the following charges are applicable. When inspection or testing is performed by or under the direction of GSA, charges will be at the rate of $22.00 per man-hour or fraction thereof if the inspection is at a GSA distribution center; $26.00 per man-hour or fraction thereof, plus travel costs incurred, if the inspection is at another location; and $26.00 per man-hour or fraction thereof for laboratory testing, except that when a testing facility other than a GSA laboratory performs all or part of the required tests, the Contractor shall be assessed the actual cost incurred by the Government as a result of testing at such facility. When inspection is performed by or under the direction of any agency other than GSA, the charges indicated above may be used, or the agency may assess the actual cost of performing the inspection and testing.

E-FSS-514

PRODUCTION AND INSPECTION POINT(S) (JUN 1990)

(a) Production Point. Offeror shall insert, in the appropriate spaces provided below, the names of the manufacturers of the items offered and the address and telephone number of the facility(ies) at which the items will be manufactured or produced.

Source Inspection Point. Offeror shall indicate, in the spaces provided below, the location(s) at which the supplies will be inspected or made available for inspection. If the addresses of the respective production and inspection points are identical, the offeror should insert "same" in the inspection point column.

PRODUCTION POINT—

INSPECTION POINT

ITEM

NAME OF

NAME, ADDRESS

(If other than

NO(s).

MANUFACTURER

(Including County), and Production point)

TELEPHONE NUMBER

NOTE: If additional space is needed, the offeror may furnish the requested information by an attachment to the offer.

52.211-16 VARIATION IN QUANTITY (APR 1984) 11.703(a) (a) A variation in the quantity of any item called for by this contract will not be accepted unless the variation has been caused by conditions of loading, shipping, or packing, or allowances in manufacturing processes, and then only to the extent, if any, specified in paragraph (b) below.

The permissible variation shall be limited to:

* 0 * percent increase on Direct Delivery Orders (other than GSA Depots),

* 0 * percent decrease on Direct Delivery Orders (other than GSA Depots),.

This increase or decrease shall apply to the quantities specified in each order issued under any contract resulting from this solicitation.

52.247-34 F.o.b. Destination.

As prescribed in 47.303-6(c), insert the following clause:

F.o.b. Destination (Nov 1991)

(a) The term “f.o.b. destination,” as used in this clause, means—

(1) Free of expense to the Government, on board the carrier’s conveyance, at a specified delivery point where the consignee’s facility (plant, warehouse, store, lot, or other location to which shipment can be made) is located; and

(2) Supplies shall be delivered to the destination consignee’s wharf (if destination is a port city and supplies are for export), warehouse unloading platform, or receiving dock, at the expense of the Contractor. The Government shall not be liable for any delivery, storage, demurrage, accessorial, or other charges involved before the actual delivery (or “constructive placement” as defined in carrier tariffs) of the supplies to the destination, unless such charges are caused by an act or order of the Government acting in its contractual capacity. If rail carrier is used, supplies shall be delivered to the specified unloading platform of the consignee. If motor carrier (including “piggyback”) is used, supplies shall be delivered to truck tailgate at the unloading platform of the consignee, except when the supplies delivered meet the requirements of Item 568 of the National Motor Freight Classification for “heavy or bulky freight.” When supplies meeting the requirements of the referenced Item 568 are delivered, unloading (including movement to the tailgate) shall be performed by the consignee, with assistance from the truck driver, if requested. If the contractor uses rail carrier or freight forwarded for less than carload shipments, the contractor shall ensure that the carrier will furnish tailgate delivery, when required, if transfer to truck is required to complete delivery to consignee.

(b) The Contractor shall—

(1)(i) Pack and mark the shipment to comply with contract specifications; or

(ii) In the absence of specifications, prepare the shipment in conformance with carrier requirements;

(2) Prepare and distribute commercial bills of lading;

(3) Deliver the shipment in good order and condition to the point of delivery specified in the contract;

(4) Be responsible for any loss of and/or damage to the goods occurring before receipt of the shipment by the consignee at the delivery point specified in the contract;

(5) Furnish a delivery schedule and designate the mode of delivering carrier; and

(6) Pay and bear all charges to the specified point of delivery.

(End of clause)

TIME OF DELIVERY

Delivery is required to be made at destination within 30 calendar days after receipt of order.

F-FSS-230

DELIVERIES TO THE U.S. POSTAL SERVICE (JAN 1994)

(a) Applicability. This clause applies to orders placed for the U.S. Postal Service (USPS) and accepted by the Contractor for the delivery of supplies to a USPS facility (consignee).

(b) Mode/Method of Transportation. Unless the Contracting Officer grants a waiver of this requirement, any shipment that meets the USPS requirements for mailability (i.e., 70 pounds or less, combined length and girth not more than 108 inches, etc.) delivery shall be accomplished via the use of the USPS. Other commercial services shall not be used, but this does not preclude the Contractor from making delivery by the use of the Contractor's own vehicles.

(c) Time of Delivery. Notwithstanding the required time for delivery to destination as may be specified elsewhere in this contract, if shipments under this clause are mailed not later than five (5) calendar days before the required delivery date, delivery shall be deemed to have been made timely.

52.204-6 Data Universal Numbering System (DUNS) Number.

As prescribed in 4.607(a), insert the following provision:

Data Universal Numbering System (DUNS) Number (Apr 2008)

(a) The offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation “DUNS” or “DUNS+4” followed by the DUNS number or “DUNS+4” that identifies the offeror’s name and address exactly as stated in the offer. The DUNS number is a nine-digit number assigned by Dun and Bradstreet, Inc. The DUNS+4 is the DUNS number plus a 4-character suffix that may be assigned at the discretion of the offeror to establish additional CCR records for identifying alternative Electronic Funds Transfer (EFT) accounts (see Subpart 32.11) for the same concern.

(b) If the offeror does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one.

(1) An offeror may obtain a DUNS number—

(i) Via the Internet at http://fedgov.dnb.com/webform or if the offeror does not have internet access, it may call Dun and Bradstreet at 1-866-705-5711 if located within the United States; or

(ii) If located outside the United States, by contacting the local Dun and Bradstreet office. The offeror should indicate that it is an offeror for a U.S. Government contract when contacting the local Dun and Bradstreet office.

(2) The offeror should be prepared to provide the following information:

(i) Company legal business name.

(ii) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(iii) Company physical street address, city, state and ZIP Code.

(iv) Company mailing address, city, state and ZIP Code (if separate from physical).

(v) Company telephone number.

(vi) Date the company was started.

(vii) Number of employees at your location.

(viii) Chief executive officer/key manager.

(ix) Line of business (industry).

(x) Company Headquarters name and address (reporting relationship within your entity).

(End of provision)

G-FSS-900-A

CONTACT FOR CONTRACT ADMINISTRATION (JAN 1994)

Offerors are required to designate a person to be contacted for prompt contract administration.

NAME

TITLE

ADDRESS

ZIP CODE

TELEPHONE NO. (_______)

FAX NO.

52.204-7 -- Central Contractor Registration.

As prescribed in 4.1104, use the following clause:

Central Contractor Registration (Apr 2008)

(a) Definitions. As used in this clause—

“Central Contractor Registration (CCR) database” means the primary Government repository for Contractor information required for the conduct of business with the Government.

“Data Universal Numbering System (DUNS) number” means the 9-digit number assigned by Dun and Bradstreet, Inc. (D&B) to identify unique business entities.

“Data Universal Numbering System+4 (DUNS+4) number” means the DUNS number means the number assigned by D&B plus a 4-character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.) This 4-character suffix may be assigned at the discretion of the business concern to establish additional CCR records for identifying alternative Electronic Funds Transfer (EFT) accounts (see the FAR at Subpart 32.11) for the same concern.

“Registered in the CCR database” means that—

(1) The Contractor has entered all mandatory information, including the DUNS number or the DUNS+4 number, into the CCR database; and

(2) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification Number (TIN) with the Internal Revenue Service (IRS), and has marked the record “Active”. The Contractor will be required to provide consent for TIN validation to the Government as a part of the CCR registration process.

(b)

(1) By submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the CCR database prior to award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation.

(2) The offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation “DUNS” or “DUNS+4” followed by the DUNS or DUNS+4 number that identifies the offeror’s name and address exactly as stated in the offer. The DUNS number will be used by the Contracting Officer to verify that the offeror is registered in the CCR database.

(c) If the offeror does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one.

(1) An offeror may obtain a DUNS number—

(i) Via the internet at http://fedgov.dnb.com/webform or if the offeror does not have internet access, it may call Dun and Bradstreet at 1-866-705-5711 if located within the United States; or

(ii) If located outside the United States, by contacting the local Dun and Bradstreet office. The offeror should indicate that it is an offeror for a U.S. Government contract when contacting the local Dun and Bradstreet office.

(2) The offeror should be prepared to provide the following information:

(i) Company legal business name.

(ii) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(iii) Company physical street address, city, state and Zip Code.

(iv) Company mailing address, city, state and Zip Code (if separate from physical).

(v) Company telephone number.

(vi) Date the company was started.

(vii) Number of employees at your location.

(viii) Chief executive officer/key manager.

(ix) Line of business (industry).

(x) Company Headquarters name and address (reporting relationship within your entity).

(d) If the Offeror does not become registered in the CCR database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror.

(e) Processing time, which normally takes 48 hours, should be taken into consideration when registering. Offerors who are not registered should consider applying for registration immediately upon receipt of this solicitation.

(f) The Contractor is responsible for the accuracy and completeness of the data within the CCR database, and for any liability resulting from the Government’s reliance on inaccurate or incomplete data. To remain registered in the CCR database after the initial registration, the Contractor is required to review and update on an annual basis from the date of initial registration or subsequent updates its information in the CCR database to ensure it is current, accurate and complete. Updating information in the CCR does not alter the terms and conditions of this contract and is not a substitute for a properly executed contractual document.

(g)

(1)

(i) If a Contractor has legally changed its business name, “doing business as” name, or division name (whichever is shown on the contract), or has transferred the assets used in performing the contract, but has not completed the necessary requirements regarding novation and change-of-name agreements in Subpart 42.12, the Contractor shall provide the responsible Contracting Officer a minimum of one business day’s written notification of its intention to:

(A) Change the name in the CCR database;

(B) Comply with the requirements of Subpart 42.12 of the FAR;

(C) Agree in writing to the timeline and procedures specified by the responsible Contracting Officer. The Contractor must provide with the notification sufficient documentation to support the legally changed name.

(ii) If the Contractor fails to comply with the requirements of paragraph (g)(1)(i) of this clause, or fails to perform the agreement at paragraph (g)(1)(i)(C) of this clause, and, in the absence of a properly executed novation or change-of-name agreement, the CCR information that shows the Contractor to be other than the Contractor indicated in the contract will be considered to be incorrect information within the meaning of the “Suspension of Payment” paragraph of the electronic funds transfer (EFT) clause of this contract.

(2) The Contractor shall not change the name or address for EFT payments or manual payments, as appropriate, in the CCR record to reflect an assignee for the purpose of assignment of claims (see FAR Subpart 32.8, Assignment of Claims). Assignees shall be separately registered in the CCR database. Information provided to the Contractor’s CCR record that indicates payments, including those made by EFT, to an ultimate recipient other than that Contractor will be considered to be incorrect information within the meaning of the “Suspension of payment” paragraph of the EFT clause of this contract.

(h) Offerors and Contractors may obtain information on registration and annual confirmation requirements via the Internet at http://www.ccr.gov or by calling 1-888-227-2423, or 269-961-5757.

52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER—CENTRAL CONTRACTOR REGISTRATION (OCT 2003) 32.1110(a)(1)

Method of payment.

All payments by the Government under this contract shall be made by electronic funds transfer (EFT), except as provided in paragraph (a)(2) of this clause. As used in this clause, the term "EFT" refers to the funds transfer and may also include the payment information transfer.

In the event the Government is unable to release one or more payments by EFT, the Contractor agrees to either—

(i) Accept payment by check or some other mutually agreeable method of payment; or

(ii) Request the Government to extend the payment due date until such time as the Government can make payment by EFT (but see paragraph (d) of this clause).

(b) Contractor's EFT information. The Government shall make payment to the Contractor using the EFT information contained in the Central Contractor Registration (CCR) database. In the event that the EFT information changes, the Contractor shall be responsible for providing the updated information to the CCR database.

(c) Mechanisms for EFT payment. The Government may make payment by EFT through either the Automated Clearing House (ACH) network, subject to the rules of the National Automated Clearing House Association, or the Fedwire Transfer System. The rules governing Federal payments through the ACH are contained in 31 CFR part 210.

(d) Suspension of payment. If the Contractor's EFT information in the CCR database is incorrect, then the Government need not make payment to the Contractor under this contract until correct EFT information is entered into the CCR database; and any invoice or contract financing request shall be deemed not to be a proper invoice for the purpose of prompt payment under this contract. The prompt payment terms of the contract regarding notice of an improper invoice and delays in accrual of interest penalties apply.

(e) Liability for uncompleted or erroneous transfers.

If an uncompleted or erroneous transfer occurs because the Government used the Contractor's EFT information incorrectly, the Government remains responsible for—

Making a correct payment;

Paying any prompt payment penalty due; and

(iii) Recovering any erroneously directed funds.

If an uncompleted or erroneous transfer occurs because the Contractor's EFT information was incorrect, or was revised within 30 days of Government release of the EFT payment transaction instruction to the Federal Reserve System, and—

If the funds are no longer under the control of the payment office, the Government is deemed to have made payment and the Contractor is responsible for recovery of any erroneously directed funds; or

If the funds remain under the control of the payment office, the Government shall not make payment, and the provisions of paragraph (d) of this clause shall apply.

(f) EFT and prompt payment. A payment shall be deemed to have been made in a timely manner in accordance with the prompt payment terms of this contract if, in the EFT payment transaction instruction released to the Federal Reserve System, the date specified for settlement of the payment is on or before the prompt payment due date, provided the specified payment date is a valid date under the rules of the Federal Reserve System.

(g) EFT and assignment of claims. If the Contractor assigns the proceeds of this contract as provided for in the assignment of claims terms of this contract, the Contractor shall require as a condition of any such assignment, that the assignee shall register separately in the CCR database and shall be paid by EFT in accordance with the terms of this clause. Notwithstanding any other requirement of this contract, payment to an ultimate recipient other than the Contractor, or a financial institution properly recognized under an assignment of claims pursuant to subpart 32.8, is not permitted. In all respects, the requirements of this clause shall apply to the assignee as if it were the Contractor. EFT information that shows the ultimate recipient of the transfer to be other than the Contractor, in the absence of a proper assignment of claims acceptable to the Government, is incorrect EFT information within the meaning of paragraph (d) of this clause.

(h) Liability for change of EFT information by financial agent. The Government is not liable for errors resulting from changes to EFT information made by the Contractor's financial agent.

(i) Payment information. The payment or disbursing office shall forward to the Contractor available payment information that is suitable for transmission as of the date of release of the EFT instruction to the Federal Reserve System. The Government may request the Contractor to designate a desired format and method(s) for delivery of payment information from a list of formats and methods the payment office is capable of executing. However, the Government does not guarantee that any particular format or method of delivery is available at any particular payment office and retains the latitude to use the format and delivery method most convenient to the Government. If the Government makes payment by check in accordance with paragraph (a) of this clause, the Government shall mail the payment information to the remittance address contained in the CCR database.

552.216-72

PLACEMENT OF ORDERS (SEP 1999) (ALTERNATE I—SEP 1999)

(a) All delivery orders (orders) under this contract will be placed by the General Services Administration's Federal Supply Service (FSS). The Contractor is not authorized to accept orders from any other agency. Violation of this restriction may result in termination of the contract pursuant to the default clause of this contract.

(b) All orders shall be placed by Electronic Data Interchange (EDI) using the American National Standards Institute (ANSI) X12 Standard for Electronic Data Interchange (EDI) format.

(c) If the Contractor agrees, transmission will be computer-to-computer EDI. If computer-to-computer EDI is not possible, FSS will use an alternative EDI method allowing the Contractor to receive orders by facsimile transmission.

(d) When computer-to-computer EDI procedures will be used to place orders, the Contractor shall enter into a Trading Partner Agreement (TPA) with FSS in order to ensure mutual understanding by the parties of certain electronic transaction conventions and to recognize the rights and responsibilities of the parties as they apply to this method of placing orders. The TPA must identify, among other things, the third party provider(s) through which electronic orders are placed, the transaction sets used, security procedures, and guidelines for implementation.

(e) The Contractor shall be responsible for providing its own hardware and software necessary to transmit and receive data electronically. Additionally, each party to the TPA shall be responsible for the costs associated with its use of third party provider services.

(f) Nothing in the TPA will invalidate any part of this contract between the Contractor and the General Services Administration. All terms and conditions of this contract that otherwise would be applicable to a mailed order shall apply to the electronic order.

(g) The basic content and format of the TPA will be provided by:

General Services Administration Acquisition Operations and Electronic Commerce Center (FCS) Washington, DC 20406

Telephone: (703) 305-7741

FAX:

(703) 305-7720

552.216-73

ORDERING INFORMATION (SEP 1999) (ALTERNATE I—SEP 1999)

(a) In accordance with the Placement of Orders clause of this solicitation, the offeror elects to receive orders placed by GSA's Federal Supply Service (FSS) by either FORMCHECKBOX facsimile transmission or FORMCHECKBOX computer-to-computer Electronic Data Interchange (EDI).

An offeror electing to receive computer-to-computer EDI is requested to indicate below the name, address, and telephone number of the representative to be contacted regarding establishment of an EDI interface.

(c) An offeror electing to receive orders by facsimile transmission is requested to indicate below the telephone number(s) for facsimile transmission equipment where orders should be forwarded.

G-FSS-908

PLACEMENT OF ORDERS IF CONTRACTOR FAILS TO PERFORM (JUN 1996) FSS A/L FC-96-5

(a) Timely delivery in accordance with the terms and conditions of this contract is essential to the accomplishment of the mission of the General Services Administration and the agencies it supports.

(b) GSA may defer the placement of delivery orders against this contract at any time when GSA determines, at its sole discretion, that the Contractor has either failed to make progress or becomes delinquent on delivery order(s) which have been issued against the contract. The period of deferment shall last until such time as the Government is satisfied that the Contractor is capable of making timely delivery.

(c) During the period of deferment of placement of delivery orders, the Government may procure its requirements from a source other than the Contractor.

(d) The Procuring Contracting Officer (PCO) shall notify the Contractor either orally (confirmed in writing) or in writing of any decision to defer placement of delivery orders pursuant to this clause.

(e) Any action initiated by the government to acquire contract items from alternate sources pursuant to this clause may continue to completion notwithstanding the fact that the Contractor may no longer be delinquent at the time the procurement transaction with an alternate source is completed.

(f) The Contractor will NOT be held liable for excess costs on those quantities procured elsewhere as a result of the Contractor's failure to perform. However, all in-house orders are subject to all terms including delivery requirements and termination for cause/excess cost provisions. Contractor's prices shall remain the same throughout the term of the contract notwithstanding the fact that some orders may be placed with alternate sources.

(g) The rights and remedies of the Government in this clause are in addition to other rights and remedies provided by law or under this contract.

G-FSS-914-B

CONTRACTOR'S REMITTANCE (PAYMENT) ADDRESS (SEP 1996)

Payment by electronic funds transfer (EFT) is the Government’s preferred method of payment. However, under certain conditions, the Government may elect to make payment by check. The offeror shall indicate below the payment (remittance) address to which Government checks should be mailed for payment of proper invoices submitted under a resultant contract.

PAYMENT ADDRESS: ______________________________

(b) All offerors are cautioned that if the payment address shown on an invoice differs from that shown above, the address above will govern. Payment to any other address, except as provided for through EFT payment methods, will require an administrative change to the contract.

52.211-2 Availability of Specifications, Standards, and Data Item Descriptions Listed in the Acquisition Streamlining and Standardization Information System (ASSIST).

As prescribed in 11.204(b), insert the following provision:

Availability of Specifications, Standards, and Data Item Descriptions Listed in the Acquisition Streamlining and Standardization Information System (ASSIST) (Jan 2006)

(a) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites:

(1) ASSIST (http://assist.daps.dla.mil);

(2) Quick Search (http://assist.daps.dla.mil/quicksearch);

(3) ASSISTdocs.com (http://assistdocs.com).

(b) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by—

(1) Using the ASSIST Shopping Wizard (http://assist.daps.dla.mil/wizard);

(2) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or

(3) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697-2667/2179, Facsimile (215) 697-1462.

(End of provision)

52.219-2 EQUAL LOW BIDS (OCT 1995) 19.308(c) (a) This provision applies to small business concerns only.

(b) The bidder's status as a labor surplus area (LSA) concern may affect entitlement to award in case of tie bids. If the bidder wishes to be considered for this priority, the bidder must identify, in the following space, the LSA in which the costs to be incurred on account of manufacturing or production (by the bidder or the first-tier subcontractors) amount to more than 50 percent of the contract price.

(c) Failure to identify the labor surplus areas as specified in paragraph (b) of this provision will preclude the bidder from receiving priority consideration. If the bidder is awarded a contract as a result of receiving priority consideration under this provision and would not have otherwise received award, the bidder shall perform the contract or cause the contract to be performed in accordance with the obligations of an LSA concern.

552.232-74

INVOICE PAYMENTS (SEP 1999)

The due date for making invoice payments by the designated payment office is:

For orders placed electronically by the General Services Administration (GSA) Federal Supply Service (FSS), and to be paid by GSA through electronic funds transfer (EFT), the later of the following two events:

The 10th day after the designated billing office receives a proper invoice from the Contractor. If the designated billing office fails to annotate the invoice with the date of receipt at the time of receipt, the invoice payment due date shall be the 10th day after the date of the Contractor's invoice; provided the Contractor submitted a proper invoice and no disagreement exists over quantity, quality, or Contractor compliance with contract requirements.

The 10th day after Government acceptance of supplies delivered or services performed by the Contractor.

For all other orders, the later of the following two events:

The 30th day after the designated billing office receives a proper invoice from the Contractor. If the designated billing office fails to annotate the invoice with the date of receipt at the time of receipt, the invoice payment due date shall be the 30th day after the date of the Contractor's invoice; provided the Contractor submitted a proper invoice and no disagreement exists over quantity, quality, or Contractor compliance with contract requirements.

The 30th day after Government acceptance of supplies delivered or services performed by the Contractor.

(3) On a final invoice, if the payment amount is subject to contract settlement actions, acceptance occurs on the effective date of the contract settlement.

The General Services Administration will issue payment on the due date in (a)(1) above if the Contractor complies with full cycle electronic commerce. Full cycle electronic commerce includes all the following elements:

The Contractor must receive and fulfill electronic data interchange (EDI) purchase orders (transaction set 850).

The Contractor must generate and submit to the Government valid EDI invoices (transaction set 810) or submit invoices through the GSA Finance Center Internet-based invoice process. Internet-based invoices must be submitted using procedures provided by GSA.

(3) The Contractor's financial institution must receive and process, on behalf of the Contractor, EFT payments through the Automated Clearing House (ACH) system.

(4) The EDI transaction sets in (b)(1) through (b)(3) above must adhere to implementation conventions provided by GSA.

(c) If any of the conditions in (b) above do not occur, the 10 day payment due dates in (a)(1) become 30 day payment due dates.

(d) Notwithstanding paragraph (g) of the clause at FAR 52.212-4, Contract Terms and Conditions--Commercial Items, if the Contractor submits hard-copy invoices, submit only an original invoice. No copies of the invoice are required.

(e) All other provisions of the Prompt Payment Act (31 U.S.C. 3901 et seq.) and Office of Management and Budget (OMB) Circular A-125, Prompt Payment, apply.

52.214-21 Descriptive Literature.

As prescribed in 14.201-6(p)(1), insert the following provision:

Descriptive Literature (Apr 2002)

(a) “Descriptive literature,” as used in this provision, means information furnished by a bidder, such as cuts, illustrations, drawings, and brochures, that shows a product’s characteristics or construction or explains its operation. The term includes only that information required to evaluate the acceptability of the product and excludes other information for operating or maintaining the product.

(b) Descriptive literature is required to establish, for the purpose of evaluation and award, details of the product offered that are specified elsewhere in the solicitation and pertain to significant elements such as—

(1) Design;

(2) Materials;

(3) Components;

(4) Performance characteristics; and

(5) Methods of manufacture, assembly, construction, or operation.

(c) Descriptive literature, required elsewhere in this solicitation, shall be—

(1) Identified to show the item(s) of the offer to which it applies; and

(2) Received by the time specified in this solicitation.

(d) If the bidder fails to submit descriptive literature on time, the Government will reject the bid, except that late descriptive literature sent by mail may be considered under the Late Submissions, Modifications, and Withdrawals of Bids provision of this solicitation.

(e) If the descriptive literature fails to show that the product offered conforms to the requirements of the solicitation, the Government will reject the bid.

(End of provision)

Alternate I (Apr 2002). As prescribed in 14.201-6(p)(2), add the following paragraphs (f) and (g) to the basic provision:

(f) The Contracting Officer may waive the requirement for furnishing descriptive literature if the offeror has supplied a product that is the same as that required by this solicitation under a prior contract. A bidder that requests a waiver of this requirement shall provide the following information:

Prior contract number ________________________________

Date of prior contract ________________________________

Contract line item number of product supplied ____________

Name and address of Government activity to which delivery was made _________________________________________

Date of final delivery of product supplied ________________

(g) Bidders shall submit bids on the basis of required descriptive literature or on the basis of a previously supplied product under paragraph (f) of this provision. A bidder submitting a bid on one of these two bases may not elect to have its bid considered on the alternative basis after the time specified for receipt of bids. The Government will disregard a bidder's request for a waiver under paragraph (f) if that bidder has submitted the descriptive literature requested under this solicitation.

52.212-2 Evaluation—Commercial Items. (JAN 1999) As prescribed in 12.301(c), the Contracting Officer may insert a provision substantially as follows:

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

SEE PAGE 47____________________________________

[Contracting Officer shall insert the significant evaluation factors, such as (i) technical capability of the item offered to meet the Government requirement; (ii) price; (iii) past performance (see FAR 15.304); (iv) small disadvantaged business participation; and include them in the relative order of importance of the evaluation factors, such as in descending order of importance.]

Technical and past performance, when combined, are __________ [Contracting Officer state, in accordance with FAR 15.304, the relative importance of all other evaluation factors, when combined, when compared to price.]

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

52.212-4 Contract Terms and Conditions—Commercial Items.

As prescribed in 12.301(b)(3), insert the following clause:

Contract Terms and Conditions -- Commercial Items (Jun 2010)

(a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights --

(1) Within a reasonable time after the defect was discovered or should have been discovered; and

(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

(b) Assignment. The Contractor or its assignee may assign its rights to receive…