7282_EI.pdf
PDF 136 KB Posted
- Attached to
- TPS-75 system Federal contract opportunity
- Solicitation number
- FA8250-22-Q-0011
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA825022Q0011.pdf | ||
| FA825022Q0011_______0002.pdf | ||
| FA825022Q0011_______0001.pdf | ||
| FA825022Q0011_______0001.pdf | ||
| EDL_REPORT_7282.pdf | ||
| 8028_EDL_REPORT.pdf | ||
| 7282_ITMDESC_REPORT.pdf | ||
| CDRLS.pdf | ||
| 3496606_PKGRQMT_REPORT.pdf | ||
| UIIEC_REPORT_7282.pdf | ||
| QAIRQMT_REPORT_7282.pdf | ||
| FA825022Q0011.pdf | ||
| 3488292_ITMDESC_REPORT.pdf | ||
| ITMDESC_REPORT_8028.pdf | ||
| 7279_QAIRQMT_REPORT.pdf | ||
| SOW.pdf | ||
| 3496605_TRNSPDATA_REPORT.pdf | ||
| QAIRQMT_REPORT_8028.pdf | ||
| 3475528_EDL_REPORT.pdf |
Show all 19
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
MATRIX COMBINER, 3:1 ASSY. (AN/TPS-75)
2. PART NUMBER:
1D22498G02
3. NATIONAL STOCK NUMBER:
5840012257282ZR
PREPARED BY:
WILLIAM POWELL
OFFICE SYMBOL:
415 SCMS/GUEA
DATE:
MAY 4, 2022
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE / MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATIONS AND DRAWINGS ARE THE ONLY SOURCE/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY ENGINEERING.
7. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130 IN LIEU OF FPS-3008:
A. MINIMUM 1/8TH INCH ON HUMAN READABLE TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
B. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX – CONSTRUCT 2 – TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
C. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, IF EXISTING LABEL IS TO BE REPLACED.
D. SAME LABEL MATERIAL SHALL BE USED AS SPECIFIED IN DRAWING FOR EXISTING LABEL.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418.
File details come from the government source that posted it. Updated .