72773 - PD - Battery Charger.pdf

Product Description

KC-46 Battery Charger Kit

14 April 2022

1. DESCRIPTION. The Contractor shall provide the 402d Electronics Maintenance Group

(EMXG), Robins Air Force Base, one (1) each KC-46 Battery Charger Kit in support of the KC-46 BA35-01 Repair Workload.

1.1. Referencing exact part numbers and specifications mandated by Commercial

Maintenance Manual (CMM) 24-31-07-08748, CMM 35C3-2-120-8-1, and Technical Order (TO) 35C3-2-122-1, the charger kit shall include the following equipment:

Item # Description NSN Quantity

ABMS-10X

Computer with loaded software. Includes keyboard, mouse and USB converter.

Display screen, speakers and printer to be procured locally by

USAF.

NSN =

7030-01-612-1446 (for s/w) 6130-01-612-1446 (for hardware)

ABMS-

10XBU

Computer, back up for ABMS-10X, software loaded, keyboard and mouse

N/A 1

RF80-M

P/N 123020-

Christie Charger 6130-01-610-

AB3K-M

Interface board, harness and rear connection plate assy, Installed inside RF80-M Charger at our factory prior to shipment.

Also includes EMI shield.

5998-01-665-

MA3000TS Temp Plate, Measures and records battery temp prevents overheat via alerts / alarms

6685-01- 590-2160

MA539CH1 Hood, Battery Plexiglas / Acrylic, hoods fits specific ni-cad battery

BA35-01.

N/A 4

MA24DX Cell Clip Off Module, 1 ohm 3-watt load per cell

6130-01-579-5810

CSMN9MF-

RF80-M to USB serial N/A 4

CSMN25MF-

Hood to MA24DX to RF80-M N/A 8

Black Data Cable

RF80-M to MA24DX N/A 4

MACR-20 Cell reversal module, Allows for Cell records from + to –

Per Saft CMM’s

N/A 4

416161 Kit, service of Saft batteries, applicable to

KC-46A

Ni-cad battery

N/A 1

FM262E Fill Master Battery watering system.

Includes base pump control / display, gun, stowage stand and graduated cylinder for built in calibration

6160-01-590-2205

Training & Set-up

On site set up and tech training at Robins base location

N/A 1

Freight N/A 1

1.2. The Contractor shall provide the standard equipment warranty beginning at the date of acceptance by the Government.

1.3. The Contractor shall ship all items in packaging that is consistent with commercial packaging recommendations.

1.4. Training. The Contractor shall provide training on the hardware and software to designated Government employees immediately after installation.

1.5. Installation. No later than (1) week after components have been successfully delivered, the Contractor shall make arrangements with the Government Point of Contact for an installation timeline. This shall occur no later than 30 days after delivery.

1.6. Upon completion of the installation, the Contractor shall conduct a performance test to demonstrate the acceptable viability of the equipment. All defects/errors shall be corrected and adjusted as needed upon completion of this test. The contractor shall ensure all work has been completed to the satisfaction of the Government Point of Contact (GPOC) prior to final acceptance of the work by the Government. A calibration certificate shall be provided by the contractor to the GPOC at completion of a successful test. (CDRL A001, Calibration Certificate, DI-QCIC-80798B NOT 1)

2. GOVERNMENT FURNISHED PROPERTY. N/A

3. GENERAL INFORMATION.

3.1. Government Points of Contact (GPOC).

Primary Alternate

Sean Barkelew

402 EMXG/MXDEOE

(478) 926-9326

Keith Richardson

402 EMXG/MXDSR

(478) 497-9063

Sean.Barkelew@us.af.mil Keith.Richardson@us.af.mil

3.2. Delivery.

3.2.1. Delivery shall be completed within 30 days after contract award. The exact delivery date and location shall be verified with the GPOC prior to shipping.

3.2.2. Delivery shall be FOB Destination; Inside delivery to include uncrating/unpacking of all items to the following address:

402 EMXG/MXDEOE

635 Tech Road Building 639 Robins AFB, GA 31098 DoDAAC: FY2072

3.2.3. Place of Performance. The work shall be performed in building 645 at

Robins AFB, Georgia. The Government will escort the Contractor at all times while the Contractor is working on Robins AFB.

3.2.4. Hours of Operation. The Contractor’s work hours on Robins AFB shall be from 6:00 am to 2:00 pm (EST), Monday through Friday. Working any hours outside of this period shall be coordinated with the Government Representative and approved by the Contracting Officer.

3.2.5. Holidays and other Non-Work Periods. Contractor personnel shall observe

Federal holidays and closings, such as energy conservation days in accordance with the guidance provided for the WR-ALC civilian populace.

4. SECURITY REQUIREMENTS.

4.1. Security Clearance. The Contractor shall ensure personnel have a valid security clearance appropriate to the access required for proper accomplishment of contract requirements. Contractor personnel shall not be authorized access to classified and/or sensitive information and/or materials or be permitted to work on classified and/or sensitive projects and/or programs without a proper security clearance and a need-to-know. Contractor personnel whose clearances have been suspended or revoked shall immediately be denied access to classified and/or sensitive information.

4.2. Access to Government Systems. The Contractor will not require or be provided access to the base network or any Government Automated Information System.

4.3. Access to Government Facilities. The Government Representative will ensure that

Government personnel escort the Contractor at all times while the Contractor is on Robins AFB. The Air Force has mandated visitors, to include all non-DOD cardholders, to consent to a check of their criminal history prior to being allowed access to installations. The check is similar to a driver’s license check and is conducted at the Visitor Control Center located by the Main Gate to the base.

4.4. Operations Security (OPSEC). The Contractor shall ensure compliance with mailto:Sean.Barkelew@us.af.mil mailto:Keith.Richardson@us.af.mil

OPSEC requirements including procedures to protect classified and/or sensitive, but unclassified, Government projects and/or programs. The Contractor shall ensure Contractor personnel who perform work at Robins AFB or another Government facility comply with the OPSEC procedures of the facility.

4.5. Security Incident or Violation. The Contractor shall immediately notify the

Government Security Office of any potential or actual security incidents or violations including potential or actual unauthorized disclosure or compromise of classified and/or sensitive, but unclassified, information.

4.6. Safety Requirements. The Contractor shall be responsible for the safety and health of all Contractor employees.

4.6.1. Contractor Safety & Health Plan and Program. The Contractor shall establish and maintain a safety and health program detailed in a written Contractor’s Safety and Health Plan tailored to this contract. This plan shall address the requirements established in Appendix C (Industrial Safety and Health Requirements). No more than two (2) Class C mishaps per contract year and Zero (0) Class A or B mishaps will be tolerated. The Contractor shall notify the cognizant safety office of any revisions made to its safety and health plan after contract award. All changes to the plan must also be submitted in writing and approved by the cognizant Government safety office. (CDRL A002, Contractor’s Standard Operating Procedures – Safety Plan, DI- MGMT-81580)

4.6.2. The Contractor shall notify the WR-ALC Safety Office by telephone at 478)- 926-1708 during duty hours and (478)-926-3567 after hours, within four (4) hours after initial notification of all mishaps or incidents for damage to DoD property (material plus labor) entrusted by this contract and employee injuries as a result of the contract operation. A follow-up (written or e-mail) of this mishap/incident notification shall be sent within three calendar days to the Government POC, the Procurement Contracting Officer (PCO) or the Administrative Contracting Officer (ACO), who will forward it to the Safety Office. The information that is not available at the time of the initial notification shall be provided within 20 calendar days after the mishap.

Mishap notification shall contain, as a minimum, the following information (CDRL A003, Accident/Incident Report, DI-SAFT-81563 NOT 1):

a. Contract, Contract Number, Name and Title of Person(s)

Reporting;

b. Date, Time and exact location of accident/incident;

c. Brief Narrative of accident/incident (Events leading to accident/incident);

d. Cause of accident/incident, if known;

e. Estimated cost of accident/incident (material and labor to repair/replace);

f. Impound Authority Name and Phone Number (as applicable);

g. Nomenclature of equipment and personnel involved in accident/incident;

h. Corrective actions (taken or proposed);

i. Other pertinent information.

4.6.3. Environmental Management System (EMS). Any Contractor employee working on Robins Air Force Base will require EMS training. The prime Contractor is responsible for ensuring that all Subcontractors comply with this requirement. Computer-based training is provided by the Base Civil Engineering Group Environmental Management Office.

https://geobase.robins.af.mil/emstraining/EMSTrainingOptions.aspx. For questions concerning this training, contact 78 CEG/CEVP, (478) 926-1197, ext. 134.

4.6.4. Affirmative Procurement Program (APP).

4.6.4.1. In accordance with FAR 23.404(b)(1), 100% of purchases of Environmental Protection Agency (EPA)-designated products included in the Comprehensive Procurement Guidelines (CPG) list [https://www.epa.gov/smm/comprehensive-procurement-guideline-cpg-program] and/or United States Department of Agriculture (USDA)-designated products included in the biobased product listings [http://www.biopreferred.gov] shall, at a minimum, meet the EPA or USDA standards for recovered materials or biobased content, respectively, unless an item cannot be acquired competitively within a realistic timeframe, meet appropriate performance standards, and/or be acquired at a reasonable price.

4.6.4.2. In accordance with FAR 23.404(a)(iii), the Contractor shall provide estimates and verification of recovered material for EPA-designated CPG products and certification for both EPA-designated CPG products and USDA-designated biobased products. In accordance with the Robins Air Force Base, Georgia / Green Procurement Program (GPP) Plan, the Contractor shall provide estimates and certifications to the Government for completion of the applicable attachment(s) to be included in the Purchase Request (PR) package

5. APPENDICES. None https://geobase.robins.af.mil/emstraining/EMSTrainingOptions.aspx http://www.biopreferred.gov/