Work_Item_1.pdf

RAD_0318

WORK ITEM 1: 5342-01-408-5388, Corrosion Preventive Anode, Purchase

1. SCOPE

1.1 Intent. This supply item describes the requirements for the Contractor to package the provided GFE items into a kit and ship one kit per unit in a purchase request.

1.2 Government-Furnished Property.

The following kit contains the parts required to comply with this EC and shall be requisitioned from

Evoqua Water Technologies LLC, 2 Milltown Ct, Union, NJ 07083-8108.

TABLE 1 - GFE KITS

ITEM DESCRIPTION NSN/PN QTY

(EA.)

ESTIMATED COST

($/UNIT)

ANODE, CORROSION

PREVENTIVE

NSN: 5342-01-408-5388

PN: 3W3T105513

1 16,027.87

The parts listed in the table below are contained in kit, P/N: 3W3T105513 and are not required to be requisitioned separately.

TABLE 2 - GFE KIT CONTENTS

MTI ITEM DESCRIPTION P/N QTY (EA.)

N CAPASTIC 2 PT ADHESIVE PN: W3T106410 6

N ANODE MTG SHELL ELIP PN: W2598554 1

N MAT NEOPRENE PN: W2T98553 1

N CABLE MOLD AY PN: W3T106687 1

N BODY, GLAND AY 0.57 ID PN: W3T105437 1

N NUT & WASHER NEOPRENE PN: W3T106648 6

N NUT, PACKING W/ INSERT PN: W2T97822 1

N STUD NELSON W/ FERRULE PN: W2T98408 6

Y ANODE ASSY PN: W3T106665 1

N SILICONE RUBBER 30 OZ PN: W2T89987 3

N GREASE, SILICONE 1.5 OZ PN: W2T89822 1

2. REFERENCES

COAST GUARD DRAWINGS

Coast Guard Drawing 225-WLB-633-201, Rev F, Installation Drawing DS Anode Elliptical

COAST GUARD PUBLICATIONS

Coast Guard Maintenance Procedure Card E-W-13454, 11/2016, CAPAC Diagnostic Program

Test

Coast Guard Technical Order Process Guide CGTO PG-85–00–60-S, Rev 002, 09/2016, SFLC

Corrosion Prevention and Control (CPAC) Program Process Guide

Coast Guard Technical Publication (TP) 3574, SWBS 633, Sec A, 05/1996, Cathodic Protect

System - Model 67845 (WLB-225A)

Coast Guard Technical Publication (TP) 3574, SWBS 633, Sec B, 05/1996, Cathodic Protect

System - Model 67845L (206-208) 67845M (209-follow)

Coast Guard Technical Standard (TS) 633, 01/2015, Cathodic Protection

OTHER REFERENCES

BSI BS ISO/IEC 16388, 07/2007, Information technology -- Automatic identification and data capture techniques -- Code 39 bar code symbology specification

MIL-STD-2073-1E, 01/2011, Standard Practice for Military Packaging

MIL-STD-129R, 02/2014, Military Marking for Shipment and Storage

3. REQUIREMENTS

3.1 General.

The Contractor shall ensure that all zinc anodes provided to the Coast Guard comply with Coast Guard

Technical Standard 633 requirements for replacement zinc anodes.

3.1.1 Tech Rep. Not applicable.

4. QUALITY ASSURANCE

4.1 Responsibility for Inspection. The Contractor shall be responsible for the performance of all inspections and tests. The Contractor shall provide space, personnel and test equipment for the conduct of all inspection requirements. All inspection and testing shall be performed at the Contractor's plant or at other facilities acceptable to the Coast Guard.

4.2 Responsibility for Compliance. All items shall meet the requirements of sections 3 and 5. The inspections shall be comprised of the contractor's overall inspection system or quality program. The absence of any inspection requirements in this specification shall not relieve the contractor of the responsibility of assuring that all products or services submitted to the government for acceptance comply with all requirements of the contract.

4.3 Quality System. The contractor shall maintain a documented Quality System in accordance with

ASQ/ANSI/ISO 9001.

5. PRESERVATION, PACKING, MARKING, AND SHIPPING

5.1 Preservation. Not applicable.

5.2 Packing. Each kit shall be individually packaged in accordance with MIL-STD-2073-LE method 10, cushioned in a double layer of 3/4 in bubble wrap and packed in an appropriately sized ASTM-DS 118 double-wall fiberboard box.

5.3 Marking. Each Kit Shall Include Marking IAW MIL-STD-129R and bar coded IAW ISO/IEC-16388-

2007, code 39 symbology.

5.4 Shipping. Not applicable.

6 NOTES

This section is not applicable to this work item.