Statement_of_Work.pdf

Department of Homeland Security Customs and Border Protection

Statement of Work DFR receiver processor Units

1.0 BACKGROUND

The United States Border Patrol (USBP) El Paso (EPT) Sector has a requirement for the purchase of new DFR Receiver Processor equipment and accessories related to product for use by El Paso Sector Intelligence Center.

2.0 SCOPE OF WORK

It is the intent of CBP to procure commercially available equipment detailed in Section

3.1 to support the office(s) located at 8901 Montana Ave, El Paso, Texas 79925.

2.1 Contract Type

Firm-Fixed Price

2.2 Period Of Performance

Delivery of all ordered units within 30 days of order, or as negotiated

2.3 Place of Performance (Deliver To)

Customs and Border Protection El Paso Sector, USBP Acquisition Management Office 8037 Lockheed Dr El Paso, TX 79925

3.0 DESCRIPTION OF TASKS AND DELIVERABLES

3.1 Specific requirements associated with the task/deliverable.

Must be capable of performing at a level reflective of current technologies and processes. Operationally, the R8600 series serves as a surveillance-quality receiver and as a down-converter for the DFP-1000B processor.

The RDF Products Model DFR-8600 is a compact, self-contained wideband HF/VHF/UHF DF receiver and bearing processor/display combo designed for both mobile and fixed-site DF applications.

Frequency coverage is from 10 kHz to 3,000 MHZ, limited only by the accompanying DF antenna. Brand name or equal to the DFR-8600 series receiver/Processors.

2 EA: DFR-8600D DF Receiver/Processor 3 EA: DFR-8600B DF Receiver/Processor

Both utilize (added accessories)

• DMA-1306B2 60-1000 MHz covert (low profile) Mobile Adcock

DF Antenna

• DGP-16HV GPS Receiver Sensor (w/mag. Mount; wired & tested)

• Huntmaster Digital Mapping and Location Software (Single-Site

License)

• Mapmaker Map Conversion Software

Specifications

3.1.1 Processor: 4th Gen Intel Core i5 processor, equivalent or better.

3.1.2 DF Technique: Single-channel Watson-Watt

3.1.3 Frequency Coverage: 0.01-3,000 MHZ (subject to frequency limitations of attached DF antenna)

3.1.4 DF Sensitivity: Established by DF antenna

3.1.5 RF Input Impedance: 50 ohms nominal

3.1.6 IF Bandwidths: 6/15/30/200 kHz

3.1.7 Audio Output Power: 1.5 watts into 8 ohms

3.1.8 Audio Frequency response: 250-3300 Hz nom. @ -3 dB (measured at headset jack)

3.1.9 Bearing Displays: Real-time 360E polar TFT and 3½-digit numeric displays

3.1.10 Bearing Accuracy: 0.5E RMS (using 160 millisecond bearing integration)

3.1.11 Bearing Resolution: 0.5E/0.1E

3.1.12 Bearing Integration: 35/50/80/160/200/275/400 ms

3.1.13 Track & Hold RS-232 Interface (to host computer): 3 sec nominal holding time 19200-N-8-1; data string includes embedded data from receiver, GPS, & compass

3.1.14 Power Requirements: 11-16 VDC @ 2.7 amperes (negative

ground)

3.1.15 Over-And Reverse- Voltage Protection: 18 volt shunt power Zener diode blows fuse

3.1.16 Operating Temp.: 0 to +50 degrees C

3.1.17 Storage Temp.: -40 to +70 degrees C

3.1.18 Humidity: 0-95% (no condensation)

3.1.19 Dimensions: 8.5"x8.6"x10.6" (HxWxD)

3.1.20 Weight: 15.9 lbs

1.1 Deliverables

1.1.1 The contractor shall test and functionality certify all equipment prior to delivery.

1.1.2 The contractor shall provide all with manufacturer’s warranty certificates.

1.2 Delivery Instructions

1.2.1 FOB point shall be destination. The contractor is responsible for all delivery.

1.2.2 No Installation Services required

2.0 GENERAL INFORMATION

2.1 Disclosure of Information

2.1.1 Any information made available to the contractor by the government or its customers shall be used only for the purpose of carrying out the provisions of this contract. This information shall not be divulged or made known in any manner to any persons except as may be necessary in the performance of the contract.

2.1.2 In the performance of this contract, the contractor assumes responsibility for the protection of the confidentiality of government records.

2.1.3 The contractor will adhere to the requirements found in Part 24 of the Federal Acquisition Regulation, Protection of Privacy and Freedom of Information.

2.2 Technical Contact

2.2.1 The Customs and Border Protection technical contact person will be TBD after contract award.

2.3 Government Furnished Property

2.3.1 No Government Furnished property will be furnished.