7. Attachment.pdf

Page 1 CIF_Length v2.0 24 Feburary 2020

Customer Inquiry Form – Precimar Length Measurement

The purpose of this form is to give you, our customer, an easy method of providing information about your specific application requirements. Please fill out this form as best as possible and return to your designated Mahr Inc. contact via e-mail. If you have any questions, please feel free to contact your Mahr Inc. representative.

Account Name: Form ID Code: Cust.-Name_ Date (6 digits)_Length Contact Name:

Phone:

E-Mail:

Address:

City, State, ZIP: Date: February 1, 2022

Application Questions 1 What is your tightest measurement accuracy requirement? ☐ Class X ☐ Class XX ☐ Class XXX***

Machines capable of accurately measuring selected class ULM, PLM, CiM 1000 CNC ULM, PLM, CiM 1000 CNC PLM, CiM 1000 CNC ***Please contact your Mahr Inc. representative to discuss

2 What is the temperature of the room where the unit will be located? 68 ± 0.5°F NOTE: For XX measurements, Mahr Inc. recommends that the room temperature variation not be greater than ±1°F (±0.6°C) for optimal machine performance.

For XXX measurements, please consult with a member of the Mahr Inc. Applications Engineering team.

3 What is the relative humidity of the room where the unit will be located? 20-45% %RH NOTE: Mahr Inc. recommends that the room be kept at 35-60 %RH to inhibit static electricity and corrosion.

4 What items are you looking to measure? Please check all that apply.

☐ Plain Plugs/Discs ☒ Plain Rings ☐ Plain Tapers*

*Not on PLM/CiM ☐ Threaded Plugs/Discs ☐ Threaded Rings (Non-Adjustable)

☐ Tapered Threads ☐ Splines/Gears ☒ Other: Gauge Block up to 12" grade 1, 2, & 3. Inside Micrometer +/- 0.0001", dial comparator +/- 0.001", Ring Gague +/- 1.001"

5 For Plugs/Dics, what are the smallest and largest ODs you are looking to measure? Min OD Min OD (in) Max OD Max OD (in)

6 For Rings, what are the smallest and largest IDs you are looking to measure? Min ID Min ID (in) Max ID Max ID (in)

7 For Threads, are you looking to measure inch, metric, or both? ☐ Inch ☐ Metric ☐ Both

8 For Threads, what are the smallest and largest thread counts (TC) that you are looking to measure?

TPI # Min TPI (in) to TPI # Max TPI (in) OR Min Pitch Min Pitch (mm) to Max Pitch Max Pitch (mm)

9 Which thread standards are you looking to measure? ☐ Acme ☐ Stub Acme ☐ Buttress ☐ UN/UNC/UNF/UNEF/UNS ☐ Other: N/A ☐ Custom: N/A

10 Do you require any certified masters? ☐ YES ☒ NO

11 If yes, please select type(s): ☐ Gage Blocks ☐ Plain Rings ☐ Plain Plugs ☐ Other: Please Specify

NOTE: After submitting this completed form to your Mahr Inc. representative, a member of the Mahr Inc. applications team will contact you to determine the sizes and classes of certified master to add to your formal quote based on your application requirements.

12 Would you like Mahr Inc. to include a PC in this quote, or will you provide your own PC? ☒ Mahr-provided PC ☐ Own PC

13 Are there any vibration issues at the location where the machine is to be installed? ☐ YES ☒ NO If you answered “YES”, a vibration dampening solution may be required. This can be discussed with a member of the Mahr Inc. applications team.

14 What is the current timetable for purchasing this piece of equipment? February 2022

15 Is there a lead-time requirement? ☐ YES ☐ NO If YES, please specify: Your Lead-Time Requirement Here.

16 Are you replacing a system or is this a new application? ☐ Replacement Please Specify Unit ☒ New System/Expanded Capacity

17 Please Select One: ☒ Quote Required for Budget OR ☐ Budget Already Set: Please specify project budget

**** NOTE: If a ULM is quoted to you, please be aware that the ULM is a tabletop unit and requires a separate bench or tabletop on which to be placed. The exact load requirement of this bench is dependent on the ULM model quoted, which will be based upon the above-given application requirements.

The PLM and CiM 1000 CNC units are floor units and do not require a separate bench or tabletop.

Once this is completed, please return to your Mahr Inc representative for processing.

If you have any general questions and are unsure of who to contact at Mahr, please call 1-800-343-2050 and ask for a representative from customer service to connect you to your closest Mahr District Manager.

If you have any technical questions, please call 1-800-343-2050 and ask to be connected to a member the Mahr Inc. Applications Team responsible for Precimar products.