692M15-26-P-00007 Draft (1).pdf

PDF 198 KB Posted

Attached to
FAA - Target Generation Facility Computer Servers Federal contract opportunity
Solicitation number
692M15-26-P-00007
Issued by
Department of Transportation Federal Aviation Administration

About this file

This is a Solicitation/Contract/Order for Commercial Items (FAA Form 1564) issued by the Federal Aviation Administration (FAA) William J. Hughes Technical Center in Atlantic City, New Jersey. The solicitation number is 692M15-26-P-00007, with an issue date of approximately early 2025. The contractor must provide products and/or services as outlined in supporting documentation, with a firm fixed-price contract type and a total award amount marked as TBD (To Be Determined). The obligated amount is also TBD and represents a ceiling Not-to-Exceed (NTE) amount that cannot be exceeded without written Contracting Officer approval. Payment terms are Net 30, with all invoices required to be submitted electronically through the Delphi eInvoicing System at https://einvoice.esc.gov/. The requested delivery timeline is 60 days After Receipt of Order (ARO) to the William J. Hughes Technical Center for Advanced Aerospace, Building 300, Floor 2, Atlantic City, NJ 08405.

The solicitation is unrestricted for competition (not set aside for small business), with a NAICS code of 334310 and a size standard of 750 employees. The FAA Technical Point of Contact/Contracting Officer Representative is Cynthia Cecan at (609) 485-5288 or cynthia.cecan@faa.gov. Special Representative Nicholas Roselli is also identified for the William J. Hughes Technical Center. Payment will be made by the FAA AC Accounting Office in Oklahoma City, OK 73125. A bill of lading/receipt is required to be submitted with invoices that include freight charges, with only actual freight charges reimbursed up to the NTE amount. The document incorporates multiple FAA contracting clauses and provisions by reference, including requirements regarding electronic commerce and signature, organizational conflicts of interest, System for Award Management (SAM) registration, Buy American Act compliance, patent indemnity, child labor certification, and prohibition on contracting with inverted domestic corporations. Offerors must be registered in the SAM database with a valid Unique Entity Identifier (UEI) prior to award and must certify compliance with various federal requirements regarding debarment, taxes, Iran sanctions, and trafficking in persons.

View the file

Other files for this federal contract opportunity

Other files attached to FAA - Target Generation Facility Computer Servers, newest first.
File Type Posted
Server Specs.docx DOCX document
3.3.1-40 Interim Changes to AMS - EO 14173 (2).pdf PDF
Server Specs.docx DOCX document
AMS 3.8.9-8 UAS (3).pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

FAA AC ACCTG OFC

OKLAHOMA CITY OK 73125

PO BOX 25082

DOT/FAA AMK-311/314

FAA AC ACCTG OFC

SEE ADDENDUMIS CHECKED.

CODE 17a. PAYMENT WILL BE MADE BY

CODE

FACILITYCODE 16a. CONTRACTOR/

TELEPHONE NO.

16b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER

OFFEROR

AAQ200-AFNCODE 15. ADMINISTERED BYCODE 14. DELIVER TO

SEE SCHEDULE

BLOCK IS MARKED

SB NET 30

334310

SIZE STANDARD:

% FORSET ASIDE

UNRESTRICTED

AAQ600-AFN

Atlantic City NJ 08405 Atlantic City International Airport Building 300, Fourth Floor FAA William J. Hughes Technical Center AAQ-600 Acquisition & Grants

RFPIFB

11. DELIVERY FOR FOB10. THIS ACQUISITION ISCODE 9. ISSUED BY

RFQ

13. METHOD OF SOLICITATION

DESTINATION UNLESS

SIC:

SMALL BUSINESS

12. DISCOUNT TERMS

ES(609) 485-4574Kevin Smith

692M15-26-P-00007

(No collect calls)

INFORMATION CALL:

FOR SOLICITATION 8. OFFER DUE DATE/LOCAL TIMEb. TELEPHONE NUMBERa. NAME

4. ORDER NUMBER3. AWARD/ 2. CONTRACT NO.

7.

6. SOLICITATION 5. SOLICITATION NUMBER

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS 1. REQUISITION NUMBER PAGE OF

1 2

OFFEROR TO COMPLETE BLOCKS 12, 16, 22, 23, & 28

EFFECTIVE DATE

17b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 17a. UNLESS BLOCK BELOW

ISSUE DATE

23.

AMOUNT

22.

UNIT PRICE

21.

UNIT

20.

QUANTITY

19.

SCHEDULE OF SUPPLIES/SERVICES

18.

ITEM NO.

AUTHORITY 49 U.S.C. 106 (1) (6) Contractor must provide products and/or services as outlined in

Box (B).

Continued ...

27. AWARD OF CONTRACT: REFERENCE

$TBD

HEREIN, IS ACCEPTED AS TO ITEMS:

X

DATED

Kevin P. Smith

. YOUR OFFER ON SOLICITATION (BLOCK 5),

INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH

See schedule

40d. TOTAL CONTAINERS40c. DATE REC'D (YY/MM/DD)

40b. RECEIVED AT (Location)

40a. RECEIVED BY (Print)

26. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

38. PAID BY37. S/R VOUCHER NUMBER36. S/R ACCOUNT NUMBER

35. CHECK NUMBER

FINALCOMPLETE PARTIAL

34. PAYMENT

39c. DATE39b. SIGNATURE AND TITLE OF CERTIFYING OFFICER

39a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

32c. DATE32b. SIGNATURE OF AUTHORIZED CONTRACT AUTHORITY

REPRESENTATIVE

FINALPARTIAL

CORRECT FOR

33. AMOUNT VERIFIED 32. VOUCHER NUMBER

CONTRACT, EXCEPT AS NOTED

ACCEPTED, AND CONFORMS TO THEINSPECTEDRECEIVED

30a. QUANTITY IN COLUMN 20 HAS BEEN

29c. DATE SIGNED

28a. SIGNATURE OF OFFEROR/CONTRACTOR 29a. CONTRACT AUTHORITY (SIGNATURE OF CONTRACTING OFFICER)

28c. DATE SIGNED28b. NAME AND TITLE OF SIGNER (Type or Print) 29b. NAME OF CONTRACTING OFFICER (Type or Print)

31. SHIP NUMBER

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SET FORTH

OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND

CONDITIONS SPECIFIED HEREIN.

25. TOTAL AWARD AMOUNT (For Contract Authority Use Only)24. ACCOUNTING AND APPROPRIATION DATA

OFFER

ITEM NO.

SUPPLIES/SERVICES

QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 2

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

692M15-26-P-00007

(A) (B) (C) (D) (E) (F)

This Order consists of the FAA applicable Terms and Conditions. The total firm fixed-price for this order is TBD. The obligated amount of TBD is a ceiling Not-to-Exceed (NTE) amount for this award. The Contractor must not exceed this amount without written approval by the Contracting Officer.

Payment Terms: Net 30

All invoices must be submitted electronically through the Delphi eInvoicing System at https://einvoice.esc.gov/

FAA Technical Point of Contact/COR: Cynthia Cecan Ph: (609)485-5288 cynthia.cecan@faa.gov

NOTE: A bill of lading/receipt is required to be submitted with invoices that include freight charges. Only actual freight charges will be reimbursed up to the NTE amount.

* Special Representatives: Roselli, Nicholas William J Hughes Technical Center for Advanced Aerospace

Blg 300 Floor 2 Column F31

Atlantic City, NJ 08405

Delivery: 60 Days ARO

COR/Special Representatives: CECAN, CYNTHIA

The total amount of award: $TBD. The obligation for this award is shown in box 25.

Section -- - Terms and Conditions

3.1-1 CLAUSES AND PROVISIONS INCORPORATED BY REFERENCE (JUL 2019)

This screening information request (SIR) or contract, as applicable, incorporates by reference the provisions or clauses listed below with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make the full text available, or offerors and contractors may obtain the full text via Internet at:

https://fast.faa.gov/contractclauses.cfm.

(End of clause)

3.1.7-2 ORGANIZATIONAL CONFLICTS OF INTEREST (JAN 2023)

3.1.9-1 ELECTRONIC COMMERCE AND SIGNATURE (JUL 2020)

(a) The Electronic Signatures in Global and National Commerce Act (E-SIGN) establishes a legal equivalence between:

(1) Contracts written on paper and contracts in electronic form;

(2) Pen-and-ink signatures and electronic signatures; and

(3) Other legally-required written records and the same information in electronic form.

(b) With the submission of an offer, the offeror acknowledges and accepts the utilization of electronic commerce as part of the requirements of this solicitation and the resultant contract.

(c) Certain documents may need to be provided or maintained in original form, such as large-scale drawings impractical to convert to electronic format or a document with a raised seal signifying authenticity. This clause does not change or affect any other requirements that a document must be in paper format to satisfy legal requirements such as for certain real estate transactions.

(d) The use of electronic signature technology is authorized under this solicitation and the resulting contract.

(e) Contractors must not digitally sign any documents with software that uses the Secure Hash Algorithm 1 (SHA- 1). All digitally signed documents and contracts sent to the FAA must use a SHA-256 or higher hash algorithm. This is based on the National Institute of Standards and Technology (NIST) Policy Statement on Hash Functions dated August 5, 2015. Further guidance on the use of SHA-256 is in NIST Special Publication (SP) 800-57 Part 1, section

5.6.2 as amended and SP 800-131A, Revision 1 dated November 6, 2015. Additional guidance on the use of SHA-3 is in NIST SP 800-185 as amended.

(f) Contractors do not have to update documents previously digitally signed using SHA-1 hash algorithms unless the document requires updating. The FAA and contractors may continue to use SHA-1 for the following applications:

Verifying old digital signatures and time stamps, generating and verifying hash-based message authentication codes (HMACs), key derivation functions (KDFs), and random bit/number generation.

(End of Clause)

3.2.2.3-16 RESTRICTING, DISCLOSING AND USING DATA (APR 2024)

If the offeror includes data in the offer that the offeror does not want to be disclosed to the public or for the FAA to use except for evaluation purposes-

(a) Mark the title page with the following legend: "This offer includes data that must not be (1) disclosed outside the FAA and (2) duplicated, used, or disclosed -in whole or in part- for any purpose other than to evaluate this offer."

(b) Contracts awarded as a result of this SIR are subject to the disclosure requirements specified in this SIR. This restriction does not limit the FAA's right to use information from another source that may be contained in the offer.

(c) Use the following space to identify the pages containing the restricted data:

Numbers or other identification of pages:

(d) Mark each page the offeror wants to restrict with the following legend: "Using or disclosing data contained on this page is subject to the restriction on the title page of this offer."

(End of provision)

3.2.2.3-17 PREPARING OFFERS (APR 2024)

3.2.2.3-18 PROSPECTIVE OFFEROR'S REQUESTS FOR EXPLANATIONS (APR 2024)

3.2.2.3-19 RESERVED (APR 2025)

3.2.2.3-20 OFFERS (JAN 2018)

(a) The offeror (you) must submit responses to this SIR by the following electronic means [CO should insert acceptable means fax, e-mail, telegraph, e-commerce, and so on] Your offer must arrive at the place and by the time specified in the SIR.

(b) Such offers must refer to this SIR and include, as applicable, the item or sub-items, quantities, unit prices, time and place of delivery, all representations and other information required and a statement specifying the extent of your agreement with all the FAA's (we) terms, conditions, and provisions.

(c) We may decline to consider offers that do not include required information, or that reject any of the terms, conditions and provisions of the SIR.

(d) Send your offer to [CO should insert fax number, e-mail address, other offer information].

(e) We will not be responsible for any failure attributable to transmitting or receiving the offer, unless it falls under section (a) of AMS provision 3.2.2.3-14 "Late Submissions, Modifications, and Withdrawals of Submittals".

(End of provision)

3.2.2.3-29 INTEGRITY OF UNIT PRICES (JUL 2004)

3.2.2.3-81 PROHIBITION AGAINST CONTRACTING WITH INVERTED DOMESTIC

CORPORATIONS-REPRESENTATION (JUL 2024)

(a) Definition: "Inverted Domestic Corporation" and "subsidiary" are defined in AMS clause 3.2.2.3-83 "Prohibition Against Contracting with Inverted Domestic Corporations."

(b) The FAA is not permitted to use appropriated (or otherwise made available) funds for contracts with either an inverted domestic corporation or a subsidiary of an inverted domestic corporation unless the requirement is waived in accordance with applicable AMS guidance.

(c) Representation. By submission of its offer, the offeror represents that it is not an inverted domestic corporation and is not a subsidiary of one.

(End of Provision)

3.2.2.3-82 PROHIBITION ON CONDUCTING RESTRICTED BUSINESS OPERATIONS IN SUDAN

- CERTIFICATION (JUL 2012)

3.2.2.3-83 PROHIBITION AGAINST CONTRACTING WITH INVERTED DOMESTIC

CORPORATIONS (OCT 2015)

3.2.2.7-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT (APR 2023)

3.2.2.7-7 CERTIFICATION REGARDING RESPONSIBILITY MATTERS (JUL 2024)

(a)(1) The Offeror certifies, to the best of its knowledge and belief, that:

(i) All representations and certifications, as reflected in the System for Award Management (SAM) are current and accurate as of the date the proposal/offer is submitted. If the Offeror represents itself as an SDVOSB, the Offeror certifies it is certified as an SDVOSB under the Small Business Administration's Veteran Small Business Certification Program (VetCert) at the time of offer. The Offeror must provide immediate written notice to the Contracting Officer if at any time prior to award the Offeror and/or any of its principals learns that any certification or representation in SAM or on VetCert was erroneous when this proposal/offer was submitted or has become erroneous by reason of changed circumstances.

(ii)The Offeror and/or any of its Principals-

(A) Are [ ] are not [ ] presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency;

(B) Have [ ] have not [ ] within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a public- (Federal, state, or local) contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws or receiving stolen property; and

(C) Are [ ] are not [ ] presently indicted for, or otherwise criminally or civilly charged by a governmental entity with, commission of any of the offenses enumerated in subdivision (a)(1) (ii)(B) of this provision.

(D) Have [ ], have not [ ], within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $10,000 for which the liability remains unsatisfied.

(1) Federal taxes are considered delinquent if both of the following criteria apply:

(i) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted.

(ii) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded.

(2) Examples-

(i) The taxpayer has received a statutory notice of deficiency, under I.R.C. Sec. 6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability.

Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights.

(ii) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. Sec. 6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing.

During the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights.

(iii) The taxpayer has entered into an installment agreement pursuant to I.R.C. Sec. 6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment.

(iv) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. 362 (the Bankruptcy Code).(E) The Offeror has [ ] has not [ ] within a three-year period preceding this offer, had one or more contracts terminated for default by any Federal agency.

(2) 'Principals,' for the purposes of this certification, means officers; directors; owners; partners; and persons having primary management or supervisory responsibilities within a business entity (e.g., general manager; plant manager;

head of a subsidiary, division, or business segment, and similar positions). THIS CERTIFICATION CONCERNS A

MATTER WITHIN THE JURISDICTION OF AN AGENCY OF THE UNITED STATES AND THE MAKING

OF A FALSE, FICTITIOUS, OR FRAUDULENT CERTIFICATION MAY RENDER THE MAKER SUBJECT

TO PROSECUTION UNDER SECTION 1001, TITLE 18, UNITED STATES CODE.

(b) The Offeror must provide immediate written notice to the Contracting Officer if, at any time prior to contract award, the Offeror learns that its certification was erroneous when submitted or has become erroneous by reason of changed circumstances.

(c) A certification that any of the items in paragraph (a) of this provision exists will not necessarily result in withholding of an award under this SIR. However, the certification will be considered in connection with a determination of the Offeror's responsibility. Failure of the Offeror to furnish a certification or provide such additional information as requested by the Contracting Officer may render the Offeror non-responsible.

(d) Nothing contained in the foregoing must be construed to require establishment of a system of records to render, in good faith, the certification required by paragraph (a) of this provision. The knowledge and information of an Offeror is not required to exceed that which is normally possessed by a prudent person in the ordinary course of business dealings.

(e) The certification in paragraph (a) of this provision is a material representation of fact upon which reliance was placed when making award. If it is later determined that the Offeror knowingly rendered an erroneous certification, in addition to other remedies available to the Government, the Contracting Officer may terminate the contract resulting from this SIR for default.

(End of provision)

3.2.2.7-8 DISCLOSURE OF TEAM ARRANGEMENTS (APR 2008)

3.2.5-1 OFFICIALS NOT TO BENEFIT (OCT 2024)

3.2.5-3 GRATUITIES OR GIFTS (OCT 2024)

3.2.5-4 CONTINGENT FEES (OCT 2024)

3.2.5-8 WHISTLEBLOWER PROTECTION FOR CONTRACTOR EMPLOYEES (APR 2024)

3.3.1-1 PAYMENTS (JUL 2018)

3.3.1-15 ASSIGNMENT OF CLAIMS (JUL 2018)

3.3.1-17 PROMPT PAYMENT (OCT 2024)

3.3.1-33 SYSTEM FOR AWARD MANAGEMENT (JAN 2024)

(a) Definitions. As used in this clause

"Registered in the SAM database" means that the Contractor has entered all mandatory information, including the Unique Identity Identifier (UEI) or the Electronic Funds Transfer indicator, into the SAM database.

"System for Award Management (SAM) database" means the primary Government repository for Contractor information required for the conduct of business with the Government.

"Unique Entity Identifier (UEI)" (also known as the Unique Entity ID) means a number or other identifier used to identify a specific commercial, nonprofit, or Government entity. See www.sam.gov for the designated entity for establishing unique entity identifiers.

"Electronic Funds Transfer indicator" means a 4-character suffix to the Unique Entity Identifier. This 4-character suffix may be assigned at the discretion of the business concern to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts for the same parent concern.

(b)(1) By submission of an offer, the offeror acknowledges the requirement that a prospective awardee must be registered in the SAM database prior to award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation.

(2) The offeror must enter, in Representations, Certifications and Other Statements of Offerors Section of the solicitation, the UEI or EFT indicator that identifies the offeror's name and address exactly as stated in the offer. The UEI will be used by the Contracting Officer to verify that the offeror is registered in the SAM database.

(c) If the offeror does not have a UEI, it should contact www.sam.gov directly to obtain one.

The offeror should be prepared to provide the following information:

(1) Company legal business name.

(2) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(3) Company Physical Street Address, City, State, and ZIP Code.

(4) Company Mailing Address, City, State and ZIP Code (if different from physical street address).

(5) Company Telephone Number.

(6) Date the company was started.

(7) Number of employees at your location.

(8) Chief executive officer/key manager.

(9) Line of business (industry).

(10) Company Headquarters name and address (reporting relationship within your entity).

(d) If the offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer may proceed to award to the next otherwise successful registered offeror.

(e) Processing time should be taken into consideration when registering. Offerors who are not registered should consider applying for registration immediately upon receipt of this solicitation.

(f) The Contractor is responsible for the accuracy and completeness of the data within the SAM database, and for any liability resulting from the Government's reliance on inaccurate or incomplete data. To remain registered in the SAM database after the initial registration, the Contractor is required to review and update on an annual basis from the date of initial registration or subsequent updates its information in the SAM database to ensure it is current, accurate and complete. Updating information in SAM does not alter the terms and conditions of this contract and is not a substitute for a properly executed contractual document. If registered in SAM as a Service-Disabled Veteran- Owned Small Business (SDVOSB), by submission of an offer, the offeror acknowledges that they are certified as an SDVOSB under the Small Business Administration's Veteran Small Business Certification Program (VetCert).

(g)(1)(i) If a Contractor has legally changed its business name, "doing business as" name, or division name (whichever is shown on the contract), or has transferred the assets used in performing the contract, but has not completed the necessary requirements regarding novation and change-of-name agreements in AMS Procurement Guidance, the Contractor must provide the responsible Contracting Officer a minimum of one business day's written notification of its intention to:

(A) Change the name in the SAM database;

(B) Comply with the requirements of AMS regarding novation and change-of-name agreements; and

(C) Agree in writing to the timeline and procedures specified by the responsible Contracting Officer. The Contractor must provide the Contracting Officer with the notification, sufficient documentation to support the legally changed name.

(ii) If the Contractor fails to comply with the requirements of paragraph (g)(1)(i) of this clause, or fails to perform the agreement at paragraph (g)(1)(i)(C) of this clause, and, in the absence of a properly executed novation or change-of-name agreement, the SAM information that shows the Contractor to be other than the Contractor indicated in the contract will be considered to be incorrect information within the meaning of the "Suspension of Payment" paragraph of the electronic funds transfer (EFT) clause of this contract.

(2) The Contractor must not change the name or address for EFT payments or manual payments, as appropriate, in the SAM record to reflect an assignee for the purpose of assignment of claims. Assignees must be separately registered in the SAM database. Information provided to the Contractor's SAM record that indicates payments, including those made by EFT, to an ultimate recipient other than that Contractor will be considered to be incorrect information within the meaning of the "Suspension of payment" paragraph of the EFT clause of this contract.

(h) Offerors and Contractors may obtain information on registration and annual confirmation requirements via the internet at http://www.sam.gov.

(End of Clause)

3.3.1-34 PAYMENT BY ELECTRONIC FUNDS TRANSFER- SYSTEM FOR AWARD

MANAGEMENT (OCT 2024)

3.3.1-35 CERTIFICATION OF REGISTRATION IN SYSTEM FOR AWARD MANAGEMENT (APR

2022)

In accordance with Clause 3.3.1-33, System for Award Management (SAM), the offeror certifies that they are registered in the SAM Database and have entered all mandatory information including the Unique Entity Identifier (UEI) or Electronic Funds Transfer (EFT) indicator.

Name: ______________________________

Title: _______________________________

Phone Number: _______________________

(End of provision)

3.4.2-6 RESERVED (APR 2025)

3.4.2-8 FEDERAL, STATE, AND LOCAL TAXES - FIXED PRICE CONTRACT (APR 2025)

3.5-3 PATENT INDEMNITY (APR 2017)

3.6.1-17 NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM (NAICS) CODE (OCT 2022)

The North American Industry Classification System (NAICS) code for this procurement is:

334310.

The small business size standard as defined by the Small Business Administration (SBA) is the following:

For NAICS codes based on SBA's calculation of annual receipts, the annual average receipts cannot exceed [ ].

For NAICS codes based on the number of employees, the average number of employees over the last 24-month period cannot exceed 750.

(End of provision)

3.6.2-4 WALSH-HEALEY PUBLIC CONTRACTS ACT (APR 2025)

3.6.2-5 RESERVED (APR 2025)

3.6.2-9 RESERVED (APR 2025)

3.6.2-13 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (APR 2022)

3.6.2-38 CERTIFICATION OF KNOWLEDGE REGARDING CHILD LABOR END PRODUCTS

(APR 2025)

(a) Definition.

"Forced or indentured child labor," as used in this clause, means all work or service:

(i)___ Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer itself voluntarily; or (ii)___ Performed by any person under the age of 18 pursuant to a contract, the enforcement of which can be accomplished by process or penalties.

(b) Listed End Products. The following end product(s) being acquired under this solicitation is (are) included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, identified by their country of origin. There is a reasonable basis that the listed end products from the listed countries of origin may have been mined, produced, or manufactured by forced or indentured child labor. (Contracting Officer must insert end product(s) and countries of origin).

Listed End Product Listed Countries of Origin

(c) Certification. The FAA will not make award to an offeror unless the offeror, by checking the appropriate block, certifies to either paragraph (c)(1) or (c)(2) of this provision.

[ ] (1) The offeror will not supply any end product listed in paragraph (b) of this provision or any other end product included in the Department of Labor's (DOL) List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor (www.dol.gov/ilab) that was mined, produced, or manufactured in a corresponding country as listed for that end product.

[ ] (2) The offeror may supply an end product listed in paragraph (b) of this provision or any other end product included in the DOL's List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor that was mined, produced, or manufactured in the corresponding country as listed for that product, and the offeror certifies that it has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture that end product.

(End of provision)

3.6.2-39 TRAFFICKING IN PERSONS (OCT 2024)

3.6.3-14 RESERVED (APR 2025)

3.6.3-16 RESERVED (APR 2023)

3.6.3-20 RESERVED (APR 2025)

3.6.3-23 RESERVED (APR 2025)

3.6.4-2 BUY AMERICAN ACT - SUPPLIES (JAN 2024)

(a) The Buy American Act (41 U.S.C. §§ 8301-8305) and Executive Order No. 10582, dated December 17, 1954, as amended, provide that the Government gives preference to domestic end products.

(b) Definitions:

(1) "Components," as used in this clause, means those articles, materials, and supplies incorporated directly into the end products.

(2) "Cost of components" means-

(A) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(B) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (A) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the end product.

(3) "Domestic end product," as used in this clause for an end product that does not consist wholly or predominantly of iron or steel or a combination of both, means

(A) an unmanufactured end product mined or produced in the United States, or

(B) an end product manufactured in the United States, if

(i) the cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029. Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic, or

(ii) the end product is a COTS item, or

For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of foreign iron and steel constitutes less than 5 percent of the cost of all the components used in the end product. The cost of foreign iron and steel includes but is not limited to the cost of foreign iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the end product and a good faith estimate of the cost of all foreign iron or steel components excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the definition of "cost of components".

(4) "End products," as used in this clause, means those articles, materials, and supplies to be acquired for public use under this contract.

(5) "Fastener" means a hardware device that mechanically joins or affixes two or more objects together.

Examples of fasteners are nuts, bolts, pins, rivets, nails, clips, and screws.

(6) "Foreign End Product" means an end product other than a domestic end product.

(7) "Foreign offer," as used in this clause, means an offered price for a foreign end product, including transportation to destination and duty (whether or not a duty free entry certificate is issued).

(8) "Predominantly of iron or steel or a combination of both" means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

(9) "Steel" means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

(c) The Contractor must deliver only domestic end products, except those--

(1) For use outside the United States;

(2) That the FAA determines are not mined, produced, or manufactured in the United States in sufficient and reasonably available commercial quantities and of a satisfactory quality. In accordance with AMS Guidance T3.6.4A.3.c (3) (c), such determinations of non-availability must also be approved by the FAA Acquisition Executive (FAE) and reviewed by the Office of Management and Budget (OMB) Made in America Office (MIAO);

(3) For which the FAA determines that domestic preference would be inconsistent with the public interest;

or

(4) For which the FAA determines the cost to be unreasonable.

(A) Unless the FAA determines otherwise, the offered price of a domestic end product is unreasonable when the lowest acceptable domestic offer exceeds the lowest acceptable foreign offer, inclusive of duty, by:

(i) More than 20 percent, if a domestic offer is from a large business that is not a labor surplus area concern; or

(ii) More than 30 percent, if a domestic offer is from a small business concern or any labor surplus area concern.

(B) The evaluation in subparagraph (A) above will be applied on an item by item basis or to any group of items on which award may be made, as specifically provided by the screening information request.

(C) If an award of more than $250,000 would be made to a domestic concern if the 30 percent factor were applied, but not if the 20 percent factor were applied, the FAA will decide whether award to the domestic concern would involve unreasonable cost.

(End of clause)

3.6.4-5 FAA BUY AMERICAN PREFERENCE - STEEL AND MANUFACTURED GOODS (APR

2022)

3.6.4-10 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JAN 2010)

3.6.4-19 PROHIBITION ON CONTRACTING WITH ENTITIES ENGAGING IN CERTAIN

ACTIVITIES OR TRANSACTIONS RELATED TO IRAN- REPRESENTATION AND

CERTIFICATIONS (JAN 2024)

(a) Definitions.

"Person"

(1) Means

(i) A natural person;

(ii) A corporation, business association, partnership, society, trust, financial institution, insurer, underwriter, guarantor, and any other business organization, any other nongovernmental entity, organization, or group, and any governmental entity operating as a business enterprise; and

(iii) Any successor to any entity described in paragraph (1)(ii) of this definition; and

(2) Does not include a government or governmental entity that is not operating as a business enterprise.

"Sensitive Technology"

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically (i)To restrict the flow of free, unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict the speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to Section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

(3)The offeror must e-mail any questions concerning sensitive technology to the Department of State at CISADA106@state.gov.

(b) Certification. Except as provided in paragraph (c) of this provision or if a waiver has been granted in accordance with AMS Iran Sanctions Guidance, by submission of its offer, the offeror

(1)Represents, to the best of its knowledge and belief, that the offeror does not export any sensitive technology to the government of Iran or any individuals owned or controlled by, or acting on behalf or at the direction of, the government of Iran;

(2) Certifies that the offeror, or any other entity owned or controlled by, or person controlled by the offeror, does not engage in any activities for which sanctions may be imposed under section 5 of the Iran Sanctions Act of 1996.

These sanctioned activities are in the areas of development of the petroleum resources of Iran, production of refined petroleum products in Iran, sale and provision of refined petroleum products to Iran, and contributing to Iran's ability to acquire or develop certain weapons or technologies; and

(3) Certifies that the offeror, and any other entity owned or controlled by, or person controlled by the offeror, does not knowingly engage in any transaction that exceeds $10,000 with Iran's Revolutionary Guard Corps or any of its officials, agents, or affiliates, the property and interests in property of which are blocked pursuant to the International Emergency Economic Powers Act 50 USC 1701 et. seq. (see the Department of the Treasury's Office of Foreign Assets Control (OFAC) Specially Designated Nationals and Blocked Persons List on their website).

(c) The certification requirement of paragraph (b) of this provision does not apply if the acquisition is subject to the trade-related acts in AMS Trade Agreements Guidance.

(End of provision)

3.9.1-1 CONTRACT DISPUTES (JAN 2020)

3.9.1-2 PROTEST AFTER AWARD (AUG 1997)

3.9.1-3 PROTEST (APR 2024)

AS A CONDITION OF SUBMITTING AN OFFER OR RESPONSE TO THIS SIR (OR OTHER

SOLICITATION, IF APPROPRIATE), THE OFFEROR OR POTENTIAL OFFEROR AGREES TO BE BOUND

BY THE FOLLOWING PROVISIONS RELATING TO PROTESTS:

(a) Protests concerning Federal Aviation Administration Screening Information Requests (SIRs) or awards of contracts shall be resolved through the Federal Aviation Administration (FAA) dispute resolution system at the Office of Dispute Resolution for Acquisition (ODRA) and shall be governed by the procedures set forth in 14 C.F.R.

Parts 14 and 17, which are hereby incorporated by reference. Judicial review, where available, will be in accordance with 49 U.S.C. 46110 and shall apply only to final agency decisions. A protestor may seek review of a final FAA decision only after its administrative remedies have been exhausted.

(b) Offerors initially should attempt to resolve any issues concerning potential protests with the Contracting Officer.

The Contracting Officer should make reasonable efforts to answer questions promptly and completely, and, where possible, to resolve concerns or controversies. The protest time limitations, however, will not be extended by attempts to resolve a potential protest with the Contracting Officer.

(c) The filing of a protest with the ODRA may be accomplished by mail, overnight delivery, hand delivery, or by facsimile or if permitted by order of the ODRA, by electronic filing. A protest is considered to be filed on the date it is received by the ODRA during normal business hours. The ODRA's normal business hours are from 8:30 am to 5:00 pm Eastern Time.

(d) Only an interested party may file a protest. An interested party is one whose direct economic interest has been or would be affected by the award or failure to award an FAA contract. Proposed subcontractors are not "interested parties" within this definition.

(e) A written protest must be filed with the ODRA within the times set forth below, or the protest shall be dismissed as untimely:

(1) Protests based upon alleged improprieties in a solicitation or a SIR that are apparent prior to bid opening or the time set for receipt of initial proposals shall be filed prior to bid opening or the time set for the receipt of initial proposals.

(2) In procurements where proposals are requested, alleged improprieties that do not exist in the initial solicitation, but which are subsequently incorporated into the solicitation, must be protested not later than the next closing time for receipt of proposals following the incorporation.

(3) For protests other than those related to alleged solicitation improprieties, the protest must be filed on the later of the following two dates:

(i) Not later than seven (7) business days after the date the protester knew or should have known of the grounds for the protest; or

(ii) If the protester has requested a post-award debriefing from the FAA Product Team, not later than five (5) business days after the date on which the Product Team holds that debriefing.

(f) Protests shall be filed at:

(1) For filing by hand delivery, courier or other form of in-person delivery:

Office of Dispute Resolution for Acquisition Federal Aviation Administration 600 Independence Avenue SW., Room 2W100 Washington, DC 20591; or

For filing by U.S. Mail:

Office of Dispute Resolution for Acquisition Federal Aviation Administration

800 Independence Avenue SW Washington, DC 20591 [Attention: AGC-70, Wilbur Wright Bldg. Room 2W100]; or

Telephone: (202) 267-3290 Facsimile: (202) 267-3720 Alternate Facsimile: (202) 267-1293; or

(2) Other address as specified in 14 CFR Part 17.

(g) At the same time as filing the protest with the ODRA, the protester shall serve a copy of the protest on the Contracting Officer and any other official designated in the SIR for receipt of protests by means reasonably calculated to be received by the Contracting Officer on the same day as it is to be received by the ODRA. The protest shall include a signed statement from the protester, certifying to the ODRA the manner of service, date, and time when a copy of the protest was served on the Contracting Officer and other designated official(s).

(h) Additional information and guidance about the ODRA dispute resolution process for protests can be found on the ODRA Website at http://www.faa.gov.

(End of provision)

3.10.1-7 BANKRUPTCY (APR 1996)

3.10.1-9 STOP-WORK ORDER (APR 2025)

3.10.1-12 CHANGES - FIXED-PRICE (APR 1996)

3.10.1-25 NOVATION AND CHANGE-OF-NAME AGREEMENTS (OCT 2007)

3.10.4-2 INSPECTION OF SUPPLIES - FIXED PRICE (NOV 1997)

3.10.4-4 INSPECTION OF SERVICES - BOTH FIXED-PRICE & COST REIMBURSEMENT (APR

1996)

3.10.4-16 RESPONSIBILITY FOR SUPPLIES (APR 1996)

3.10.6-1 TERMINATION FOR CONVENIENCE OF THE GOVERNMENT (FIXED PRICE) (OCT

1996)

3.10.6-4 DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) (JAN 2020)

3.11-34 F.O.B. DESTINATION (APR 1999)

3.13-4 CONTRACTOR IDENTIFICATION NUMBER - UNIQUE ENTITY IDENTIFIER (UEI) (APR

2022)

(a) Definitions. As used in this provision:

"Contractor Identification Number," as used in this provision, means " Unique Entity Identifier" (UEI)(also known as the Unique Entity ID), which is a nine-digit number assigned by the System for Award Management (SAM) to identify unique business entities (taken from AMS Clause 3.3.1-33 "System for Award Management".)

"Electronic Funds Transfer indicator " means the 4-character suffix to the Unique Entity Identifier. This 4-character suffix may be assigned at the discretion of the business concern to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts for the same parent concern.

(b) Contractor identification is essential for receiving payment and complying with statutory contract reporting requirements. Therefore, the offeror must provide its UEI or EFT indicator below. The UEI will be used by the Contracting Officer to verify that the offeror is registered in the SAM database.

UEI or EFT indicator: _________________________

(c) If the offeror does not have a UEI, it should obtain one via www.sam.gov.

(d) The offeror should be prepared to provide the following information when requesting a UEI:

(1) Company legal business name.

(2) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(3) Company Physical Street Address, City, State, and ZIP Code.

(4) Company Mailing Address, City, State and ZIP Code (if different from physical street address).

(5) Company Telephone Number.

(6) Date the company was started.

(7) Number of employees at your location.

(8) Chief executive officer/key manager.

(9) Line of business (industry).

(10) Company Headquarters name and address (reporting relationship within your entity).

(End of provision)

3.13-5 RESERVED (APR 2023)

3.13-13 RESERVED (APR 2023)

File details come from the government source that posted it. Updated .