MAS - Prudent Technology LLC - 47QTCA24D00F1

GENERAL SERVICES ADMINISTRATION

Federal Supply Service

Multiple Award Schedule (MAS) Authorized Federal Supply Schedule Price List

Prudent Technology, LLC 8200 Greensboro Dr, Suite 900 McLean, VA 22102

Phone: 703-327-6432 Fax: 270-968-2207 www.prudenttechnology.com

UEI: LKTJT6AMQHM4

DUNS: 079616834

Cage: 7AUP3

Contract Number: 47QTCA24D00F1

Period Covered by Contract: 08/29/2024 – 08/28/2029

General Services Administration

Federal Acquisition Service

Pricelist current through Modification A815 - Implementation of Order Level Material (OLM) SIN, dated

September 5, 2024.

Products and ordering information in this Authorized Information Technology Schedule Pricelist are also available on the GSA Advantage! System (http://www.gsaadvantage.gov).

Table of Contents

1 AUTHORIZED SPECIAL ITEM NUMBERS (SINs):

2 INFORMATION FOR ORDERING ACTIVITIES APPLICABLE TO ALL SPECIAL ITEM NUMBERS ... 4

3 TERMS AND CONDITIONS APPLICABLE TO ORDER-LEVEL MATERIALS (SPECIAL ITEM

NUMBER OLM)

4 PRUDENT TECHNOLOGY LABOR CATEGORY (LCAT) DESCRIPTION

4.1 Management Consultant

4.2 Security Engineer

4.3 Software Engineer

4.4 System / Network Engineer

4.5 Test Engineer

4.6 Cloud Engineer

4.7 Data Engineer

4.8 Subject Matter Expert (SME)

4.9 DevSecOps Engineer

4.10 Program Manager

4.11 Project Manager

4.12 Data / Systems Architect

4.13 Business Analyst

4.14 Information Security Specialist

4.15 Technical Writer

4.16 Helpdesk and IT Support

5 PRUDENT TECHNOLOGY LABOR RATES

1 AUTHORIZED SPECIAL ITEM NUMBERS (SINs):

SIN 54151S - INFORMATION TECHNOLOGY (IT) PROFESSIONAL SERVICES

FPDS Code D301 IT Facility Operation and Maintenance

FPDS Code D302 IT Systems Development Services

FPDS Code D306 IT Systems Analysis Services

FPDS Code D307 Automated Information Systems Design and Integration Services FPDS Code D308 Programming Services FPDS Code D310 IT Backup and Security Services

FPDS Code D311 IT Data Conversion Services

FPDS Code D313 Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) Services FPDS Code D316 IT Network Management Services

FPDS Code D317 Creation/Retrieval of IT Related Automated News Services, Data Services, or Other Information Services (All other information services belong under Schedule 76)

FPDS Code D399 Other Information Technology Services, Not Elsewhere Classified

SIN 518210C – Cloud Computing and Cloud Related IT Professional Services

SIN OLM – Order – Level Materials (OLMs) – Subject to Cooperative Purchasing

Note 1: All non-professional labor categories must be incidental to and used solely to support hardware, software and/or professional services, and cannot be purchased separately.

Note 2: Offerors and Agencies are advised that GSA MAS is not to be used as a means to procure services which properly fall under the Brooks Act. These services include, but are not limited to, architecture, engineering, mapping, cartographic production, remote sensing, geographic information systems, and related services. FAR 36.6 distinguishes between mapping services of an A/E nature and mapping services which are not connected nor incidental to the traditionally accepted A/E Services.

Note 3: This solicitation is not intended to solicit for the reselling of IT Professional Services, except for the provision of implementation, maintenance, integration, or training services in direct support of a product.

Under such circumstances the services must be performance by the publisher or manufacturer or one of their authorized agents.

2 INFORMATION FOR ORDERING ACTIVITIES APPLICABLE TO ALL SPECIAL

ITEM NUMBERS

SPECIAL NOTICE TO AGENCIES: Small Business Participation

SBA strongly supports the participation of small business concerns in the Federal Supply Schedules Program.

To enhance Small Business Participation, the SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.

For orders exceeding the micropurchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage!™ online shopping service (www.fss.gsa.gov). The catalogs/pricelists, GSA

Advantage!™ and the Federal Supply Service Home Page (www.fss.gsa.gov) contains information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and

Women-owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micropurchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirements.

1. GEOGRAPHIC SCOPEOFCONTRACT:

Domestic delivery is delivery within the 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC, and U.S. Territories. Domestic delivery also includes a port or consolidation point, within the aforementioned areas, for orders received from overseas activities.

Overseas delivery is delivery to points outside of the 48 contiguous states, Washington, DC, Alaska, Hawaii, Puerto Rico, and U.S. Territories.

Offerors are requested to check one of the following boxes:

[ ] The Geographic Scope of Contract will be domestic and overseas delivery.

[ ] The Geographic Scope of Contract will be overseas delivery only.

[X] The Geographic Scope of Contract will be domestic delivery only.

2. CONTRACTOR'S ORDERING ADDRESS AND PAYMENT INFORMATION:

Prudent Technology LLC 8200 Greensboro Dr, Suite 900, McLean, VA 22102

Contractors are required to accept credit cards for payments equal to or less than the micro-purchase threshold for oral or written delivery orders. Credit cards will be acceptable for payment above the micro- purchase threshold. In addition, bank account information for wire transfer payments will be shown on the invoice.

The following telephone number(s) can be used by ordering activities to obtain technical and/or ordering assistance:

(Phone) 703-327-6432 http://www.fss.gsa.gov/

3. LIABILITY FOR INJURY OR DAMAGE

The Contractor shall not be liable for any injury to ordering activity personnel or damage to ordering activity property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.

4. STATICAL DATA FOR GOVERNMENT ORDERING OFFICE COMPLETION OF

STANDARD FORM 279:

Block 9: G. Order/Modification Under Federal Schedule Block 30: Type of Contractor - A: SMALL DISADVANTAGE BUSINESS Block 31: Woman-Owned Small Business - YES Block 36: Contractor's Taxpayer Identification Number (TIN): 46-4940126

4a. CAGE Code: 7AUP3 4b. Contractor has registered with SAM.

5. FOB DESTINATION

6. DELIVERY SCHEDULE

6a. TIME OF DELIVERY: The Contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as set forth below:

30 D a y s ARO

6b. URGENT REQUIREMENTS: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering activity, ordering activities are encouraged, if time permits, to contact the Contractor for the purpose of obtaining accelerated delivery. The Contractor shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery time acceptable to the ordering activity, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

7. DISCOUNTS: Prices shown are NET Prices; Basic Discounts have been deducted.

a ) Prompt Payment: None, Net 30 days

b) Quantity/Volume Discount: None

c) Dollar Volume: None

d) Other: NONE

8. TRADE AGREEMENTS ACT OF 1979, as amended:

All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of

1979, as amended.

9. STATEMENT CONCERNING AVAILABILITY OF EXPORT PACKING: N/A

10. SMALL REQUIREMENTS: The minimum dollar value of orders to be issued is $100.

11. MAXIMUM ORDER (All dollar amounts are exclusive of any discount for prompt payment.)

The Maximum Order value for the following Special Item Numbers (SINs) is $500,000.00: Special

Item Number

54151HEAL – Health Information Technology (IT)

12. ORDERING PROCEEDURES FOR FEDERAL SUPPLY SCHEDULE CONTRACTS

Ordering activities shall use the ordering procedures of Federal Acquisition Regulation (FAR)

8.405 when placing an order or establishing a BPA for supplies or services. These procedures apply to all schedules.

a. FAR 8.405-1 Ordering procedures for supplies, and services not requiring a statement of work.

b. FAR 8.405-2 Ordering procedures for services requiring a statement of work.

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS

REQUIREMENTS: ordering activities acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index).

Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering activities, shall be responded to promptly by the Contractor.

13.1 FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS PUBS):

Information Technology products under this Schedule that do not conform to Federal Information Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication." Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use. Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487-4650.

13.2 FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS): Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED- STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED -STD." Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Supply Service, Specification Section, 470 East L'Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619-8925. Please include a self-addressed mailing label when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301)975-2833.

14. CONTRACTOR TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2001)

(a) Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract. All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the

Multiple Award Schedule.

(b) Travel: The Contractor may be required to travel in performance of orders issued under this contract.

Allowable travel and per diem charges are governed by Pub.L. 99-234 and FAR Part 31 and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the

Multiple Award Schedule. The Industrial Funding Fee does NOT apply to travel and per diem charges. NOTE: Refer to FAR Part 31.205-46

Travel Costs, for allowable costs that pertain to official company business travel in regard to this contract.

(c) Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific

FSC/service code classifications offered. All costs associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the Multiple

Award Schedule program.

(d) Insurance: As a commercial practice, the Contractor may be required to obtain/possess insurance coverage for specific FSC/service code classifications offered. All costs associated with obtaining/possessing such insurance should be factored into the price offered under the Multiple Award

Schedule program.

(e) Personnel: The Contractor may be required to provide key personnel, resumes or skill category descriptions in the performance of orders issued under this contract. Ordering activities may require agency approval of additions or replacements to key personnel.

(f) Organizational Conflicts of Interest: Where there may be an organizational conflict of interest as determined by the ordering agency, the Contractor's participation in such order may be restricted in accordance with

FAR Part 9.5.

(g) Documentation/Standards: The Contractor may be requested to provide products or services in accordance with rules, regulations, OMB orders, standards and documentation as specified by the agency's order.

(h) Data/Deliverable Requirements: Any required data/deliverables at the ordering level will be as specified or

Negotiated in the agency's order.

(i) Government-Furnished Property: As specified by the agency's order, the Government may provide property, equipment, materials, or resources as necessary.

(j) Availability of Funds: Many Government agencies' operating funds are appropriated for a specific fiscal year. Funds may not be presently available for any orders placed under the contract or any option year. The Government's obligation on orders placed under this contract is contingent upon the availability of appropriated funds from which payment for ordering purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are available to the ordering Contracting Officer.

15. CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES: Any ordering activity, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR 52.212-4, paragraphs (l) Termination for the ordering activity's convenience, and (m) Termination for Cause (See C. 1.)

16. GSA ADVANTAGE!

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

(1) Manufacturer;

(2) Manufacturer's Part Number; and

(3) Product categories.

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.: NetScape). The Internet address is http://www.fss.gsa.gov/.

17. PURCHASE OF OPEN MARKET ITEMS

NOTE: Open Market Items are also known as incidental items, noncontract items, non-Schedule items, and items not on a Federal Supply Schedule contract. ODCs (Other Direct Costs) are not part of this contract and should be treated as open market purchases. Ordering Activities procuring open market items must follow FAR 8.402(f).

For administrative convenience, an ordering activity contracting officer may add items not on the Federal Supply Multiple Award Schedule (MAS) ~ referred to as open market items ~ to a Federal Supply Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if-

(1) All applicable acquisition regulations pertaining to the purchase of the items not on the Federal Supply

Schedule have been followed (e.g., publicizing (Part 5), competition requirements (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs

(Part 19));

(2) The ordering activity contracting officer has determined the price for the items not on the Federal Supply

Schedule is fair and reasonable;

(3) The items are clearly labeled on the order as items not on the Federal Supply Schedule; and

(4) All clauses applicable to items not on the Federal Supply Schedule are included in the order.

18. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

19. OVERSEAS ACTIVITIES

The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of

Columbia, except as indicated below:

NOT APPLICABLE

Upon request of the Contractor, the ordering activity may provide the Contractor with logistics support, as available, in accordance with all applicable ordering activity regulations. Such ordering activity support will be provided on a reimbursable basis, and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

20. BLANKETPURCHASEAGREEMENTS(BPAs)

The use of BPAs under any schedule contract to fill repetitive needs for supplies or services is allowable. BPAs may be established with one or more schedule contractors. The number of BPAs to be established is within the discretion of the ordering activity establishing the BPA and should be based on a strategy that is expected to maximize the effectiveness of the BPA(s). Ordering activities shall follow FAR 8.405-3 when creating and implementing BPA(s).

21. CONTRACTOR TEAM ARRANGEMENTS

Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238-74, Industrial

Funding Fee and Sales Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

22. INSTALLATION, DEINSTALLATION, REINSTALLATION

The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act applies.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act.

The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services.

23. SECTION 508 COMPLIANCE.

I certify that in accordance with 508 of the Rehabilitation Act of 1973, as amended (29 U.S.C.

794d), FAR 39.2, and the Architectural and Transportation Barriers Compliance Board Electronic and Information Technology (EIT) Accessibility Standards (36 CFR 1194) General Services Administration (GSA), that all IT hardware/software/services are 508 compliant:

Yes √

No

If applicable, Section 508 compliance information on the supplies and services in this contract are available in Electronic and Information Technology (EIT) at the following:

www.PrudentTechnology.com The EIT standard can be found at: www. Section508.gov/.

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES.

Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order -

(a) A copy of the authorization from the ordering activity with whom the contractor has the prime contract

(unless a copy was previously furnished to the Federal Supply Schedule contractor); and

(b) The following statement:

This order is placed under written authorization from date . In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply http://www.prudenttechnology.com/ http://www/

Schedule contract, the latter will govern.

25. INSURANCE—WORK ON A GOVERNMENT INSTALLATION (JAN 1997) (FAR 52.228-5)

(a) The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

(b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective—

(1) For such period as the laws of the State in which this contract is to be performed prescribe; or

(2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting

Officer, whichever period is longer.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors' proofs of required insurance, and shall make copies available to the Contracting Officer upon request.

26. SOFTWARE INTEROPERABILITY.

Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item's interface may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core. gov.

27. ADVANCE PAYMENTS

A payment under this contract to provide a service or deliver an article for the United States Government may not be more than the value of the service already provided or the article already delivered. Advance or pre- payment is not authorized or allowed under this contract. (31 U.S.C. 3324) http://www.core/

3 TERMS AND CONDITIONS APPLICABLE TO ORDER-LEVEL MATERIALS (SPECIAL

ITEM NUMBER OLM)

OLMs are supplies and/or services acquired in direct support of an individual task or delivery order placed against a Federal Supply Schedule (FSS) program contract or BPA. OLM pricing is not established at the FSS contract, but at the order level. Since OLMs are identified and acquired at the order or BPA level, the ordering contracting officer (OCO) is responsible for making a fair and reasonable price determination for all OLMs using

FAR 15.404 techniques for commercial price determinations.

Using this procedure, ancillary supplies and services that are unknown at the time of the Schedule contract award may be included and priced at the order level or BPA level.

OLM SIN-Level Requirements/Ordering

Instructions: OLMs are:

- Purchased under the authority of the FSS Program as a special ordering procedure

- Identified at the order or BPA level (either at the time the order is placed or as the requirement for

OLMs develop during the course of performance)

- Defined and priced at the ordering activity level in accordance with GSAR clause 552.238-115 Special

Ordering Procedures for the Acquisition of Order-Level Materials.

- Only authorized for use in direct support of another awarded SIN.

- Only authorized for inclusion at the order level under a Time-and-Materials (T&M) or Labor-Hour (LH)

Contract Line Item Number (CLIN)

- Subject to a Not To Exceed (NTE) ceiling price limited to 33.33% of the total value of the order or BPA

OLMs are not items awarded under ancillary supplies/services or other direct cost (ODC) SINs (these items are defined, priced, and awarded at the FSS contract level)

NOTE: When used in conjunction with a Cooperative Purchasing eligible SIN, this SIN is Cooperative

Purchasing Eligible

4 PRUDENT TECHNOLOGY LABOR CATEGORY (LCAT) DESCRIPTION

All LCATs require, at a minimum, a high school diploma. The following table outlines the experience equivalency for advanced degree substitution requirements. For all the below labor categories listed below, Prudent Technology LLC will accept:

Degree Experience Equivalency High School Diploma Two (2) Years Related Experience

BS/BA Four (4) Years Related Experience

MS/MA Six (6) Years Related Experience

PhD Eight (8) Years Related Experience

4.1 Management Consultant

Conducts organizational studies and evaluations, designs systems and procedures, conducts work simplification and measurement studies, and prepares reports, procedures, draft regulations, guidelines, briefings, and related documentation to assist management in operating more efficiently and effectively.

Performs data collection, interviewing, data modeling, project testing, and creation of performance measurements to support project objectives. Performs research and prepares and conducts business analyses and studies, needs assessments, requirements analysis/definition and cost/benefit analyses to align business systems, solutions, and initiatives. Develops, analyzes, evaluates, advises on, and or improves the effectiveness of management controls, processes, information and documentation systems, and similar functions of management.

Develops business methods for problem solving, process change, and solutions implementation ensuring enterprise-wide integration. Identifies best practices, assesses performance measurement, and research, collect, and verify data and translates it into strategic and operational guidance. Guides and assists clients through a wide range of management and organizational and business improvement and modernization initiatives.

Supports customer requirements for communication of organizational vision, mission, and strategy. Prepares background papers, briefings, and speeches; creates web and portal content; and performs similar organizational messaging activities. Supports customers in the development, implementation, and maintenance of strategy, doctrine, standards, policies, and procedures.

Title Education Years of

Experience Description of Responsibilities

Management

Consultant I

Bachelor’s degree in field related to tasking

5 years general experience

Applies fundamental concepts, processes, practices, and procedures on work assignments. Performs work that requires practical experience and training. Work is performed under supervision.

Management

Consultant II

Bachelor’s degree in field related to tasking

8 years general experience

Possesses and applies a comprehensive knowledge across key tasks and high impact assignments. Plans and leads major work assignments. Evaluates performance results and recommends major changes affecting short-term project growth and success.

Functions as a technical expert across multiple project assignments. Directs the activities of more junior personnel or other staff as necessary. May supervise others.

Management

Consultant III

Master’s degree in field related to tasking

10 years general experience

Provides technical/management leadership on major tasks or work assignments. Establishes goals and plans that meet project objectives. Has domain and expert technical knowledge and extensive experience in the development of solutions, recommendations, or outcomes. Decision making and domain knowledge may have a critical impact on overall project implementation. Directs the activities of more junior personnel or other staff as necessary. May supervise others.

4.2 Security Engineer

Designs, develops, implements, or recommends cybersecurity control solutions that ensure protection of information and systems. Establishes and satisfies complex enterprise-wide cybersecurity requirements based upon the analysis of user, policy, regulatory, and resource demands. Identifies security risks, threats, and vulnerabilities of networks, systems, applications, and new technology initiatives and recommends mitigation measures. Applies expertise to government and commercial common user systems and dedicated special purpose systems requiring specialized cybersecurity features and procedures. Examples could include command and control-related networks. Supports customers in the development, implementation, and maintenance of strategy, doctrine, standards, policies, and procedures.

Title Education/Certifications Years of

Description of Responsibilities

Security Engineer

I

(1) Bachelor’s degree in a computer science or technical related discipline, or

(2) any Bachelor’s degree and cyber-related certification of

CISSP or higher.

2 years related experience

Applies fundamental concepts, processes, practices, and procedures on work assignments. Performs work that requires practical experience and training. Work is performed under supervision.

Security

Engineer II

(1) Bachelor’s degree in a computer science or technical related discipline, or

(2) any Bachelor’s degree and cyber-related certification of

CISSP or higher.

5 years related experience

Possesses and applies expertise on multiple complex work assignments. Assignments may be broad in nature, requiring originality and innovation in determining how to accomplish tasks. Operates with appreciable latitude in developing methodology and presenting solutions to problems. Contributes to deliverables and performance metrics where applicable.

Security

Engineer III

(1) Bachelor’s degree in a computer science

- related discipline, or

(2) any Bachelor’s degree and cyber-related certification of

CISSP or higher.

8 years related experience

Possesses and applies a comprehensive knowledge across key tasks and high impact assignments. Plans and leads major work assignments. Evaluates performance results and recommends major changes affecting short-term project growth and success. Functions as a technical expert across multiple project assignments. Decision making and domain knowledge may have a critical impact on overall project implementation. Directs the activities of more junior personnel or other staff as necessary May supervise others.

4.3 Software Engineer

Develop software and database specifications and requirements. Proposes development strategies and creates action plans and applications to carry out strategies and accomplish objectives. Contribute to the definition, analysis, architecture, modeling, design, development and testing of software. Support application programming involving database access or knowledge or real-time application development. Interface with customers to identify software and database requirements. Collaborate with hardware design engineers on machine characteristics that affect software/ database systems and works with them to resolve incompatibilities. Develops science, engineering, business, and other data processing solutions to implement and improve information systems and architectures. Possesses in-depth knowledge of the enterprise, logic, systems, programming, and components, and a broad range of knowledge across the organization business, data, technology, applications, and organizational views. Provides support in the areas of analysis, design, development, implementation, and maintenance of software, systems, and technologies. Analyzes user requirements, procedures, and problems to automate business processes or optimize existing information systems. Analyzes, designs, evaluates, and plans business architectures and information technology systems architectures to optimize the enterprise information technology architecture. Provides technical assistance to organization on existing and new technology in all areas of information technology such as platform, operations, network, applications, and security. Supports customers in the development, implementation, and maintenance of strategy, doctrine, standards, policies, and procedures.

Description of Responsibilities

Software

Engineer I

Bachelor’s degree in computer science or technical discipline

2 years related experience

Applies fundamental concepts, processes, practices, and procedures on work assignments. Performs work that requires practical experience and training. Work is performed under supervision.

Software

Engineer II

Bachelor’s degree in computer science or technical discipline

5 years related experience

Possesses and applies expertise on multiple complex work assignments. Assignments may be broad in nature, requiring originality and innovation in determining how to accomplish tasks. Operates with appreciable latitude in developing methodology and presenting solutions to problems.

Contributes to deliverables and performance metrics where applicable.

Software

Engineer III

Bachelor’s degree in computer science or technical discipline

8 years related experience

Possesses and applies a comprehensive knowledge across key tasks and high impact assignments. Plans and leads major work assignments. Evaluates performance results and recommends major changes affecting short-term project growth and success in IT system and/or network administration, configuration, architecture, design and maintenance. Functions as a technical expert across multiple project assignments. May supervise others.

4.4 System / Network Engineer

Plans, designs, develops, tests, installs, or maintains computer and information networks, such as local area networks, wide area networks, intranets, extranets, and other voice, wireless, video, and data communications networks. Performs network modeling, analysis, and planning. May also design network and computer security measures. Install, configure and maintain operating systems like Windows, Linux, UNIX, mainframe and Storage Area Network (SAN). Performs a variety of engineering tasks that are broad in nature and are concerned with system design and implementation. Plans and performs engineering research, design, development, and other assignments in conformance with design, engineering, and customer specifications.

Makes recommendations and advises on system design, development, improvements, optimization, or support efforts. Evaluates overall design effectiveness, cost, reliability, security, and safety. Proactively ensures the highest levels of systems and infrastructure availability through inspections, creation Proactively ensures the highest levels of systems and infrastructure availability through inspections, creation, and enforcement of standardized procedures and processes, as well as refinement of Service Level Agreements (SLAs). May research and recommend network and data communications hardware and software. Performs complex engineering or analytical tasks and activities in one or more technical areas associated with communications networks. Enforces security procedures, installs network software, and manages network performance.

Troubleshoots and resolves problems. Implements and coordinates network policies, procedures, and standards. Supports customers in the development, implementation, and maintenance of strategy, doctrine, standards, policies, and procedures.

Description of Responsibilities

Network

Engineer I

Bachelor’s degree in computer science or technical discipline

2 years related experience

Applies fundamental concepts, processes, practices, and procedures on work assignments. Performs work that requires practical experience and training. Work is performed under supervision.

Network

Engineer II

Bachelor’s degree in computer science or technical discipline

5 years related experience

Possesses and applies expertise on multiple complex work assignments. Assignments may be broad in nature, requiring originality and innovation in determining how to accomplish tasks. Operates with appreciable latitude in developing methodology and presenting solutions to problems.

Contributes to deliverables and performance metrics where applicable.

Network

Engineer III technical discipline

8 years related experience

Possesses and applies a comprehensive knowledge across key tasks and high impact assignments. Plans and leads major work assignments. Evaluates performance results and recommends major changes affecting short-term project growth and success.

Functions as a technical expert across multiple project assignments. May supervise others.

4.5 Test Engineer

Develops, implements, and maintains quality assurance/configuration management programs in support of a variety of software, hardware, and services. Establish standards for life cycle, documentation, development methods, testing, and maintenance. Develops and defines major and minor characteristics of quality / configuration management (including metrics and scoring parameters) and determines requisite quality control/configuration management resources for an actual task order. Perform all testing functions including creating test cases, test plans, system testing, regression testing, performance testing and support UAT. Conducts or participates in formal and informal reviews at predetermined points throughout the system life cycle. Meeting with the software design team to discuss verification protocols. Identifying software application weaknesses and target areas. Sketching out ideas for automated software test procedures. Reviewing software bug reports and highlighting problem areas. Writing automation scripts and implementing software applications. Serve as liaison between Project Management and other functional groups to resolve issues regarding quality /configuration management. Reviews and evaluates software products and services for adherence to government directives, standards, and guidelines. May provide task direction and guidance to less experienced team members.

Title Education Years of Experience

Description of Responsibilities

Test Engineer I Bachelor’s degree in computer science or technical discipline

2 years related experience

Applies fundamental concepts, processes, practices, and procedures on work assignments. Performs work that requires practical experience and training. Work is performed under supervision.

Test Engineer

II

technical discipline

5 years related experience

Possesses and applies expertise on multiple complex work assignments. Assignments may be broad in nature, requiring originality and innovation in determining how to accomplish tasks. Operates with appreciable latitude in developing methodology and presenting solutions to problems.

Contributes to deliverables and performance metrics where applicable.

Test Engineer

III

Bachelor’s degree in computer science or technical discipline

8 years related experience Possesses and applies a comprehensive knowledge across key tasks and high impact assignments. Plans and leads major work assignments. Evaluates performance results and recommends major changes affecting short-term project growth and success. Functions as a technical expert across multiple project assignments. Decision making and domain knowledge may have a critical impact on overall project implementation. Directs the activities of more junior personnel or other staff as necessary. May supervise others.

4.6 Cloud Engineer

Develop and implement cloud-applications, migrate existing on-premises applications to the cloud, and debug cloud stacks. Design and develop cloud infrastructure and assets to help a business meet its goals. Work closely with DevOps team members for technical work of building, deploying, and migrating applications within an organization’s computing cloud. Implement and measure strategic cloud security programs. Ensure mitigation of risks identified in cloud-based solutions. Evaluate, research, and develop IT cloud security risk assessments, security tools and implementation plans. Maintain data integrity by implementing proper access control for cloud services. Identify the top cloud architect solutions to successfully meet the strategic needs of the organization. Architect and develop a robust, scalable, and cloud-based platform. Implement and oversee cloud computing solutions. Map cloud adoption plans, application design, and cloud management and monitoring.

Provide architect services that utilize latest recent technologies and architecture to produce services that meet customers’ demands. Work closely with IT security to monitor the organization's cloud privacy. Advise and assist for issues relating to cloud security. Identify the best practices of cloud architecture to support applications. Administrator and develop a robust, scalable, and cloud-based platform. Implement and oversee cloud computing administration. Map cloud adoption plans, application design, and cloud management and monitoring. Provide administration services for cloud service provider (CSP) AWS, GCP or Azure technologies to manage services that meet customers’ demands. Work closely with IT security to monitor the organization's cloud privacy.

Description of Responsibilities

Cloud

Engineer I

Bachelor’s degree in computer science or technical discipline

2 years related experience

Applies fundamental concepts, processes, practices, and procedures on work assignments. Performs work that requires practical experience and training. Work is performed under supervision.

Cloud

Engineer II technical discipline

5 years related experience

Possesses and applies expertise on multiple complex work assignments. Assignments may be broad in nature, requiring originality and innovation in determining how to accomplish tasks. Operates with appreciable latitude in developing methodology and presenting solutions to problems.

Contributes to deliverables and performance metrics where applicable.

Cloud

Engineer III technical discipline

8 years related experience Possesses and applies a comprehensive knowledge across key tasks and high impact assignments. Plans and leads major work assignments. Evaluates performance results and recommends major changes affecting short-term project growth and success. Functions as a technical expert across multiple project assignments. Decision making and domain knowledge may have a critical impact on overall project

4.7 Data Engineer

Implements, monitors, and reorganizes databases, codes, tests, implements, and maintains Database

Architectures (Das). Analyzes and resolves database system production problems. Analyzes user requirements and statistics and participates in database/DW design and performance evaluation reviews. Responsible for the design, build, and integration of data from various resources, including management of big data. Assumes authorship of complex queries and data accessibility, with the goal of optimizing the performance of the enterprise big data ecosystem. Conducts data cleaning to rid the system of old, unused, or duplicate data.

Reviews object and data models and the metadata repository to structure the data for better management and quicker access. Execution of ETL (Extract, Transform and Load) on top of big datasets and create DW used for reporting or analysis. Manages the development of big data projects and components. Plans and budgets staff and database resources. May reallocate resources to maximize benefits. Prepares and delivers presentations on

Database Management Systems (DBMS) concepts. Supports the administration of all relational databases, database design, development, maintenance, security, and backup. Ensures detailed user/group role security models and is primary point-of-contact for adding and dropping database objects, performance tuning, and performance analysis. Provides detailed performance reporting daily, schedule database jobs, perform disaster recovery planning and implementation, and stored procedure creation and tuning. Provides daily supervision and direction to data engineering staff. Active participation in the data modeling process Title Education Years of

Experience Description of Responsibilities

Data

Engineer

Bachelor’s degree in computer science or technical discipline

2 years related experience

Applies fundamental concepts, processes, practices, and procedures on work assignments. Performs work that requires practical experience and training. Work is performed under supervision.

Data Engineer technical discipline

5 years related experience

Possesses and applies expertise on multiple complex work assignments. Assignments may be broad in nature, requiring originality and innovation in determining how to accomplish tasks. Operates with appreciable latitude in developing methodology and presenting solutions to problems.

Contributes to deliverables and performance metrics where applicable.

Data Engineer

III

technical discipline

8 years related experience Possesses and applies a comprehensive knowledge across key tasks and high impact assignments. Plans and leads major work assignments. Evaluates performance results and recommends major changes affecting short-term project growth and success. Functions as a technical expert across multiple project assignments. Decision making and domain knowledge may have a critical impact on overall project

4.8 Subject Matter Expert (SME)

Serves as IT subject matter expert, possessing in-depth knowledge of a particular area, such as business, computer science, engineering, mathematics, or the various sciences.

Provides extremely high-level subject matter expertise for IT project work described for advanced technical knowledge and analysis of highly specialized applications and operational environment, high-level functional systems analysis, design, integration, documentation, training, and implementation advice on complex technical problems which require knowledge of the subject matter for effective implementation. Applies IT principles, methods, and knowledge of specific functional areas of expertise to specific task order requirements. Provides advice on esoteric problems which require extensive knowledge of the subject matter.

Designs and prepares technical reports, studies, and related documentation, makes charts and graphs to record results, prepares and delivers presentations, training, and briefings. Serves as instructor in delivering training/development programs for IT systems, processes, and technologies. Conducts research necessary to develop, revise, or select training/ development courses. Prepares training catalogs.

Provides SME for essential IT operations, including operating systems, security tools, applications, servers, email systems, laptops, desktops, software, and hardware. Provides IT datacenter health monitoring solutions using next generation management tools and respond to hardware issues as they arise; help build, test, and maintain new servers. Plan and implement systems automation as required for better efficiency. Formulate and design the security system in place to maintain data safety

Recognized for strong expertise in industry issues and trends. Utilizes functional area expertise, gained through direct industry experience, to assess the operational and functional baseline of an organization and its organizational components. Works with senior managers and executives to provide industry vision and strategic direction regarding their enterprise. Guides the determination of inadequacies and/or deficiencies that affect the functional area’s ability to support/meet organizational goals. Generates functional area strategies for enhanced operations in a cross- functional area throughout the organization. Participates in account strategy sessions, strategic assessments, and design reviews to validate enterprise approach and associated work products.

Performs research and applies expertise and knowledge to technical projects, finding innovative, cost-effective means to improve techniques, procedures, and/or products and technologies. Provides research, engineering, technical, and managerial direction for problem definition, analysis, requirement development, and implementation for complex systems in the engineering discipline.