MAS - Zentek LLC - 47QTCA23D00DU

GENERAL SERVICES ADMINISTRATION

FEDERAL SUPPLY SERVICE

AUTHORIZED FEDERAL SUPPLY SCHEDULE FSS PRICE LIST

On-line access to contract ordering information, terms and conditions, up-to-date pricing, and the option to create an electronic delivery order is available through GSA Advantage!, a menu-driven database system. The INTERNET address for GSA Advantage! is http://www.gsaadvantage.gov

SCHEDULE TITLE: MAS – MULTIPLE AWARD SCHEDULE

GROUP: INFORMATION TECHNOLOGY / PROFESSIONAL SERVICES

FSC CLASS(ES) / PRODUCT CODE(S): DA01 / R408

CONTRACT NUMBER: 47QTCA23D00DU

For more information on ordering go to the following website: https://www.gsa.gov/

CONTRACT PERIOD: SEPTEMBER 12, 2023, through SEPTEMBER 11, 2028

COMPANY: ZENTEK LLC

9 Bobbink Terrace East Rutherford, NJ 07073-1104 Phone number: (732) 374-3745 Fax number: (727) 614-8152 Email: roccop@zentekconsultants.net

WEBSITE: www.zentekconsultants.net

CONTRACT ADMINISTRATOR: ROCCO PARISI

ZENTEK LLC

9 Bobbink Terrace East Rutherford, NJ 07073-1104 Phone number: (732) 374-3745 Fax number: (703) 598-5398 Email: roccop@zentekconsultants.net

BUSINESS SIZE: Small Business

BUSINESS TYPE: Self-Certified Small Disadvantaged Business, Veteran Owned Business http://www.gsaadvantage.gov/

CUSTOMER INFORMATION:

1a. TABLE OF AWARDED SPECIAL ITEM NUMBERS (SINs) SIN DESCR

541611 Management and Financial Consulting, Acquisition And Grants Management Support, and Business Program and Project Management Services

611420 Information Technology Training

511210 Software Licenses

OLM Order Level Materials

1b. LOWEST PRICED MODEL NUMBER AND PRICE FOR EACH SIN:

(Government net price based on a unit of one)

See attached APPENDIX C – GSA PROPOSED PRICE LIST – Pg. 86 - 93

541611 - Technical Trainer - $143.88 541611 – Marketing Specialist - $143.88 541611 – Sales Consultant - $143.88 541611 - Director of Accounting - $143.88 541611 – Administrative Assistant - $143.88

611420 – From the Ground Up – Understanding Modern Civil Design - $113.35

511210 – BricsCAD V24 Lite all-in Maintenance - $112.95

1c. HOURLY RATES (Services Only):

See attached APPENDIX A – LABOR CATEGORY DESCRIPTIONS – Pg. 5 - 9

2. MAXIMUM ORDER: $500,000

NOTE TO ORDERING ACTIVITIES: *If the best value selection places your order over the Maximum Order identified in this catalog/pricelist, you have an opportunity to obtain a better schedule contract price. Before placing your order, contact the aforementioned contactor for a better price. The contractor may (1) offer a new price for this requirement (2) offer the lowest price available under this contract or (3) decline the order. A delivery order that exceeds the maximum order may be placed under the schedule contract in accordance with FAR 8.404.

3. MINIMUM ORDER: $100.00

4. GEOGRAPHIC COVERAGE (delivery area): Domestic: 48 Contiguous States, Alaska, Hawaii, Puerto Rico, Washington DC, and U.S. Territories

5. POINT(S) OF PRODUCTION: Belgium

6. DISCOUNT FROM LIST PRICES OR STATEMENT OF NET PRICE: Government Net Prices (discounts already deducted) are shown on the attached GSA Pricelist.

7. QUANITIY DISCOUNTS: None

8. PROMPT PAYMENT TERMS: 0.00%; Net 30 Days – Information for Ordering Offices: Prompt payment terms cannot be negotiated out of the contractual agreement in exchange for other concessions.

9. FOREIGN ITEMS: Not Applicable

10a. TIME OF DELIVERY: Subject to Task Order Level

10b. EXPEDITED DELIVERY: The schedule customer may contact the contractor for those rates

10c. OVERNIGHT AND 2-DAY DELIVERY: The schedule customer may contact the contractor for those rates

10d. URGENT REQUIREMENTS: Agencies can contact the Contractor’s representative to ensure a faster delivery. Customers are encouraged to contact the contractor for the purpose of requesting accelerated delivery.

11. FOB POINT: Destination

12a. ORDERING ADDRESS: ZENTEK LLC

C/O ROCCO PARISI

9 Bobbiink Terrace East Rutherford, NJ 07073-1104

12b. ORDERING PROCEDURES: See Federal Acquisition Regulation (FAR) 8.405-3

13. PAYMENT ADDRESS: ZENTEK LLC

C/O ROCCO PARISI

9 Bobbiink Terrace East Rutherford, NJ 07073-1104

14. WARRANTY PROVISION: Not Applicable

15. EXPORT PACKING CHARGES: Not Applicable

16. TERMS AND CONDITIONS OF RENTAL, MAINTENANCE, AND REPAIR (IF

APPLICABLE): Not Applicable

17. TEMS AND CONDITIONS OF INSTALLATION (IF APPLICABLE): Not Applicable

18a. TERMS AND CONDITIONS OF REPAIR PARTS INDICATION DATE OF PARTS

PRICE LISTS AND ANY DISCOUNTS FROM LIST PRICES (IF APPLICABLE):

Not Applicable

18b. TERMS AND CONDITIONS FOR ANY OTHER SERVICES (IF APPLICABLE):

Not Applicable

19. LIST OF SERVICE AND DISTRIBUTION POINTS: Not Applicable

20. LIST OF PARTICIPATING DEALERS: Not Applicable

21. PREVENTIVE MAINTENANCE: Not Applicable

22a. SPECIAL ATTRIBUTES SUCH AS ENVIRONMENTAL ATTRIBUTES (e.g.

recycled content, energy efficiency, and/or reduced pollutants): Not Applicable

22b. Section 508 Compliance for Electronic and Information Technology (EIT):

Not Applicable

23. UNIQUE ENTITY IDENTIFIER (UEI) NUMBER: LZPWHQPVAMA9

24. NOTIFICATION REGARDING REGISTRATION IN SYSTEM FOR AWARD

MANAGEMENT (SAM) DATABASE: Registered, and Registration is valid to February 18, 2025 ~ Cage Code: 8ZR31

APPENDIX A LABOR DESRIPTION

APPENDIX B COURSE DESCRIPTIONS

APPENDIX C GSA PRICE LIST

ZenTek LLC 9 Bobbink Terrace East Rutherford, NJ, 07073 www.zentekconsultants.net

APPENDIX A

LABOR CATEGORY DESCRIPTIONS

Principal

Minimum Year Experience: 20 years

Minimum Education: Bachelors

Responsibilities:

A minimum of 20 years of experience working with C-level executives in government and private industry. Extensive experience in facilitation, training and consulting required. Duties include supervising contractors, facilitating strategic and operational planning sessions with senior-level clients, performing organizational studies, and making bold recommendations, meeting with clients about their requirements, providing direct consultation and training to client organizations.

Project Manager

Minimum Year Experience: 10 years

Minimum Education: Bachelors

Responsibilities:

A minimum of 15 years of experience working with government and private industry. Experience in facilitation, training and/or consulting required. Duties include facilitating strategic planning sessions with clients, meeting with clients about their requirements, and providing direct consultation and training to client organizations. Incumbent is able to work independently under the general supervision of the

Managing Principal.

Sr. Technical Specialist

Minimum Year Experience: 5 years

Minimum Education: Bachelors

Responsibilities:

A minimum of 5 years of experience working with government and private industry. Experience interacting with, and in support of, customers requiring consulting, configuration and customization of software systems and processes. Proven ability to manage small teams, coordinate available resources and schedule long term development projects. Duties include researching and learning new software systems as appropriate and developing customization, configuration, training, and support services surrounding those systems.

http://www.zentekconsultants.net/

East Rutherford, NJ, 07073 www.zentekconsultants.net

Technical Specialist

Minimum Year Experience: 3 years

Minimum Education: Bachelors

Responsibilities:

A minimum of 3 years of experience working with government and private industry. Experience interacting with, and in support of, customers requiring consulting, configuration and customization of software systems and processes. Duties include researching and learning new software systems as appropriate and developing customization, configuration, training and support services surrounding those systems.

Technical Trainer

Minimum Year Experience: 2 Years

Minimum Education: Bachelors

Responsibilities:

A minimum of 2 years of experience working with government and private industry. Experience interacting with, and in support of, customers requiring training, both in-person and online, for specified software systems and processes. Duties include researching and learning new software systems as appropriate and developing training courses/programs to support those systems.

Technical Consultant

Minimum Year Experience: 3 years

Minimum Education: Bachelors

Responsibilities:

A minimum of 3 years of experience working with government and private industry. Experience interacting with, and in support of, customers requiring consulting, configuration and customization of software systems and processes. Duties include researching and learning new software systems as appropriate and developing customization, configuration, training and support services surrounding those systems.

East Rutherford, NJ, 07073 www.zentekconsultants.net

Training Consultant

Minimum Year Experience: 2 Years

Minimum Education: Bachelors

Responsibilities:

A minimum of 2 years of experience working with government and private industry. Experience interacting with, and in support of, customers requiring training, both in-person and online, for specified software systems and processes. Duties include researching and learning new software systems as appropriate and developing training courses/programs to support those systems.

Marketing Director

Minimum Year Experience: 15 Years

Minimum Education: Bachelors

Responsibilities:

A minimum of 15 years of experience working with government and private industry. Directs, manages, designs, and implements marketing communications and marketing research in support of marketing and outreach goals. Directs and produces communications in all forms of digital, electronic, and traditional media forms. Researches, analyzes, plans, and executes strategic and tactical marketing initiatives.

Applies web and digital technologies to marketing projects, campaigns, and programs. May have advanced skills and experience in campaign management, digital media, social media, search engine marketing, marketing automation, media buying, content strategies, content development, and online event marketing.

Marketing Specialist

Minimum Year Experience: 5 Years

Minimum Education: Bachelors

Responsibilities:

A minimum of 5 years of experience working with government and private industry. Creates and implements marketing communications and marketing research in support of marketing and outreach efforts. Produces communications in all forms of digital, electronic, and traditional media forms. Applies web and digital technologies to marketing projects, campaigns, and programs. May have specific skills in digital media, social media, search engine marketing, marketing automation, media buying, content strategies, content development, and online event marketing.

East Rutherford, NJ, 07073 www.zentekconsultants.net

Sales Manager

Minimum Year Experience: 10 Years

Minimum Education: Bachelors

Responsibilities:

A minimum of 10 years of experience working with government and private industry. Plan, direct, or coordinate the actual distribution or movement of a software product or service to the customer.

Coordinate sales distribution by establishing sales territories, quotas, and goals and establish training programs for sales representatives. Analyze sales statistics gathered by staff to determine sales potential and inventory requirements and monitor the preferences of customers.

Sales Consultant

Minimum Year Experience: 3 Years

Minimum Education: Bachelors

Responsibilities:

A minimum of 3 years of experience working with government and private industry. Research market conditions in local, regional, or national areas, or gather information to determine potential sales of a software product or service. Contact, meet with and develop an understanding of client software needs and make purchase recommendations in conjunction with technical staff. Processes client software orders and regularly follow up for upgrade, training, and additional service requirements.

Construction Technology Manager

Minimum Year Experience: 15 Years

Minimum Education: Bachelors

Responsibilities:

A minimum of 15 years of experience working with government and private industry. Plan, direct, or coordinate, usually through subordinate supervisory personnel, activities concerned with the construction technologies related to maintenance of structures, facilities, and systems. Participate in the conceptual development of a construction technology project and oversee its organization, scheduling, budgeting, and implementation. Expert in specialized construction technology fields, such as QTO, project management systems, and estimating.

East Rutherford, NJ, 07073 www.zentekconsultants.net

Construction Tech Specialist/Consultant

Minimum Year Experience: 5 Years

Minimum Education: Bachelors

Responsibilities:

A minimum of 5 years of experience working with government and private industry. Experience interacting with, and in support of, customers requiring consulting, configuration and customization of construction-based software and web solutions. Duties include researching and learning new software systems as appropriate and developing customization, configuration, training, and support services surrounding those systems. Prepare cost estimates for construction projects and support services to aid management in bidding on or determining price of product or service.

Director of Accounting

Minimum Year Experience: 10 Years

Minimum Education: Bachelors

Responsibilities:

A minimum of 10 years of experience working with government and private industry. Examine estimates, invoices for completeness, accuracy, and conformance with procedures and regulations. Analyzes budgeting and accounting reports and oversees book-keeping and accounting processes within financial software system.

Administrative Assistant

Minimum Year Experience: 3 Years

Minimum Education: None

Responsibilities:

A minimum of 5 years of experience working with government and private industry. Provide high-level administrative support by conducting research, preparing statistical reports, handling information requests, and performing clerical functions such as preparing correspondence, receiving visitors, arranging conference calls, and scheduling meetings.

866-824-4459 https://zentekconsultants.net sales@zentekconsultants.net

APPENDIX B

COURSE DESCRIPTIONS

AUTOCAD CIVIL 3D COURSES

Course Title: AutoCAD Civil 3D for Land Surveyors

Course Length: 8 hours

Minimum Participants: 3

Maximum Participants: 25

Unit of Issue: Per Course

Course Description:

Survey drafting in AutoCAD Civil 3D has a reputation of being far more difficult than it actually is. You don’t need to work with external databases and Field Books...you can handle all your drafting using basic Civil 3D features. From initial Point import, Point Groups, Descriptor Keys and all the way thru surface creation and linework drafting, this class will show you the simplest methods of generating accurate Survey base-maps.

Session 1: Working with Point Data

• Creating and Editing Points

• Importing Point Files

• Changing Point and Label Styles

• Managing Points

• Point Groups

• Descriptor Keys

Session 2: Surface Modeling

• Understanding Surface Definitions

• Creating a Surface

• Modifying Surfaces

• Creating and Managing Surface Styles

• Surface Analysis and Labeling

Session 3: Survey Drafting

• Direction, Distance & Angles

• Drafting With Point Controls

• Side Shot, Offset & Deflection

• Inquiry Tool

• Map Check and Calculators

Session 4: Alignments & Profiles

• Creating and Editing Alignments

• Labeling Alignments and Creating Tables

• Creating Surface Profiles

• Managing Profile View Styles https://zentekconsultants.net/ mailto:sales@zentekconsultants.net

Course Title: Civil 3D – Site Design Simplified

Course Length: 8 hours

Minimum Participants: 3

Maximum Participants: 25

Unit of Issue: Per Course

Course Description:

Developing site design controls and surfaces in Civil 3D is a vital skill set, but it’s one that’s all too often left to a

“learn as you go” process. Civil 3D provides designers with a powerful set of tools to generate fast, detailed, and reliable site conditions for both existing and proposed surfaces. This class will cover all site related processes in Civil

3D from understanding surface components to advanced Grading and Subdivision design tools.

Session 1: Surfaces Made Simple

• Understanding Surfaces

• Setting Surface Labels/Display

• Controlling Contour Display Styles

• Creating/Modifying Surface Display Styles

• Creating/Modifying Surface Label Styles

• Adding Contour Labels

• Adding Point Labels

Session 2: Surface Component Controls

• Adding Points/Point Groups

• Adding Boundaries

• Adding/Editing Surface Points

• Adding/Editing Breaklines

• Swap Edges and Smooth Surfaces

• Reviewing Surface Details/Information

Session 3: Grading Design Tools

• Understanding Feature Lines

• Creating Feature Lines from existing objects

• Creating New Feature Lines

• Using Stepped Offsets

• What are Grading Objects

• Creating simple Grading Objects

• Dynamic interaction of Grading Objects

• Building Surfaces from Grading Objects

Session 4: Subdivision Grading

• Creating Dynamic Parcel Layouts

• Editing Parcels

• Controlling Parcel and distance/bearing labels

• Adding custom fields (addresses) to Parcels

• Generating Parcel Reports/Legends

• Extracting Feature Lines from Corridors

• Working with Feature Lines

• Creating side lot controls with Feature Lines

• Using Grading Objects to daylight rear yards

Course Title: Grading Optimization for AutoCAD Civil 3D

Course Length: 8 hours

Minimum Participants: 3

Maximum Participants: 25

Unit of Issue: Per Course

Course Description:

With the release of AutoCAD Civil 3D 2022, we now have the Grading Optimization tool, which is the biggest change to the grading process since the advent of Corridors. Grading Optimization allows you to define grading areas for items like zones, curbs, ramps, low points, parking lots, etc., using simple polylines. From there, AutoCAD Civil 3D handles the entire site grading process for you, even incorporating site cut/fill balancing, to provide you with the most efficient grading possible, all without you defining slopes, breaklines, and all the other controls you've manually put in for so many years.

Session 1: Intro to Grading Optimization

• Understanding Grading Optimization

• Grading Optimization Interface

• Optimization Tool Types Explained

• Visualizations & Tools

Session 2: Grading Optimization Basics

• Preliminary Site Requirements

• Using Existing Site Features

• Working with Polylines and Feature Lines

• Working with Point and Line Grading Objects

• Using Closed Geometry Grading Objects

Session 3: Working with Zones

• Understanding Zones

• Zone Priority and Constraints

• Grading Limits

• Accessible Path Zones

• Parking Lot Zones

• Sidewalk Zones

• Exclusion Zones

Session 4: Grading Optimization

• Running Optimizations

• Optimization Settings

• Optimization Constraints

• Visualization and Plot Controls

• Updating the AutoCAD Civil 3D Model

• Adding Corridor Surface Boundaries

• Dynamic actions of Corridor Surfaces

Course Title: Civil 3D Corridors – The Complete Process

Course Length: 8 hours

Minimum Participants: 3

Maximum Participants: 25

Unit of Issue: Per Course

Course Description:

Corridors are the Holy Grail of the Civil 3D world. We all see the benefit of them and the untapped potential they have but getting them to work reliably and consistently can be a struggle. This class takes you from the simple beginnings of Corridor components, to advanced Corridor design, carefully explaining and demonstrating the Civil

3D Corridor tools every step of the way.

Session 1: All About Assemblies

• Creating a Simple Assembly

• Inserting Sub-Assemblies

• Editing Sub-Assemblies

• Understanding Sub-Assembly Controls

• Building Assemblies from Sub-Assemblies

• Mirroring Assemblies

• Editing Assembly Properties

Session 2: Corridor Basics

• Creating required components for Corridor creation

• Understanding dynamic interaction of Corridors

• Editing Corridor Properties

• Understanding Corridor Regions

• Creating and dividing Corridor Regions

• Working with Surface Targets

• Working with Width Targets

• Working with Elevation Targets

Session 3: Sections and Surfaces

• Using the Corridor Section editor

• Section editor display and parameter controls

• Changing Assemblies by section

• Adding and deleting Corridor sections

• Generating a Corridor Surface

• Setting Corridor Surface data types and codes

• Adding Corridor Surface Boundaries

• Dynamic actions of Corridor Surfaces

Session 4: Intersections and Cul-de-sacs

• Creating and working with Regions

• Building Cul-de-sac Profiles

• Creating Cul-de-sac Assemblies

• Creating and working with multiple Baselines

• Adding Multiple Assemblies to a design

• Understanding the Intersection Wizard

• Setting Offsets and Targets

• Working with Regions

• Understanding, creating, and assigning Assembly Sets

• Creating and fine-tuning intersection Surfaces

Course Title: Pressure Pipes in AutoCAD Civil 3D 2022 – The New Process

Course Length: 8 hours

Minimum Participants: 3

Maximum Participants: 25

Unit of Issue: Per Course

Course Description:

Few tasks in AutoCAD Civil 3D inspire as much confusion, or frustration, as trying to develop a pressure pipe network. While Pressure Pipes have been around for years, they have a reputation of being difficult to work with and many firms have completely avoided them, opting instead to "fake it" with gravity pipes, or just plain 2D drafting on their plan and profiles. In the AutoCAD Civil 3D 2022 release, there have been major updates to both plan and profile pressure tools, making it a much simpler process to design water, gas, and other pressurized pipe designs. In this course, the instructor will lead students through the full process of plan, profile, and section layout and editing of a

Pressure Pipe Network from initial layout to completion, using the new 2022 design process.

Session 1: Setting Up Pressure Pipes

• Setting Up Network Catalogs

• Building Parts Lists

• Default Settings

• Pressure Pipe Display Styles

• Pressure Pipe Label Styles

Session 2: Pressure Networks in Plan View

• Creating a Pressure Network from Objects

• Creating a Pressure Network from Scratch

• Labeling Networks in Plan

• Editing Network Properties

• Editing Pressure Networks in Plan

• Editing Pressure Parts in Plan

Session 3: Pressure Networks in Profile View

• Creating Pressure Network Alignments & Profiles

• Projecting Pressure Networks to Profile

• Labeling Pressure Networks in Profile

• Editing Pressure Networks in Profile

• Editing Pressure Parts in Profile

Session 4: Advanced Pressure Networks

• Drawing Pressure Parts in Profile

• Design Checks for Pressure Networks

• Depth Checks for Pressure Networks

• Displaying Pressure Networks in Sections

• Controlling Section Display and Label of Crossing Pipes

• Creating Pressure Network Tables

Course Title: Civil 3D Pipe Networks for Designers

Course Length: 8 hours

Minimum Participants: 3

Maximum Participants: 25

Unit of Issue: Per Course

Course Description:

Pipe Networks are one of the most powerful, yet misunderstood processes in the Civil 3D world. Even experienced users struggle with proper configuration and use of these functions daily. Join ZenTek Consultants for this one-of-a-kind class that will show you the true power of Pipe Networks.

Session 1: Gravity Pipe Tools and Settings

• Network Catalogs & Parts Lists

• Creating Gravity Pipe Networks

• Using Network Layout Tools

• Working With Pipe and Structure Rules

Session 2: Editing Gravity Pipe Networks

• Modifying Structures

• Modifying Pipes

• Connecting/Disconnecting Parts

• Splitting and Merging Networks

• Managing Pipe Network Display Properties

Session 3: Working with Gravity Pipes in Profile & Section

• Projecting Pipes to Profile Views

• Modifying Pipes & Structures in Profile

• Controlling Network Displays and Labels

• Projecting Pipes to Section Views

• Modifying Pipes & Structures in Section

Session 4: Working with Pressure Pipe Networks

• Setting Network Catalogs

• Building Parts Lists

• Creating and Setting Display & Label Styles

• Creating & Editing Pressure Networks in Plan

• Creating & Editing Pressure Networks in Profile

Course Title: CAD Management for AutoCAD Civil 3D I

Course Length: 8 hours

Minimum Participants: 3

Maximum Participants: 25

Unit of Issue: Per Course

Course Description:

Are you the CAD Manager for a civil/site firm, or would you like to be one? Maybe you’re the owner of a small design firm, just looking to make the most of the software you pay so much for. Whatever the case, this class can help you become a true master of AutoCAD Civil 3D, so you can develop and implement system-wide standards and changes that will have a dramatic impact on your firm’s bottom line. If you aren’t 100% comfortable with all the topics below, then this is the right training resource for you!

Session 1: Working with Civil 3D Templates

• Civil 3D Default Settings

• Layers, Annotation, & Plotting Standards for Civil 3D

• Automating Point Objects with Descriptor Keys and Point Groups

Session 2: It's All About Style

• Working With Object Display Styles

• Working With & Customizing Label Styles

• Advanced Annotation: Automate Labeling

Session 3: Data Control

• Project Structures for Civil Firms

• Organizing Your Design Data with Tool Palettes

• Managing Data Shortcuts and Xrefs

Session 4: Advanced Automation

• Templates for Plan, Section, and Profile Production

• Building the Pipe Network Database

• Pre-Defined Point Groups and Surfaces

Course Title: CAD Management for AutoCAD Civil 3D II

Course Length: 8 hours

Minimum Participants: 3

Maximum Participants: 25

Unit of Issue: Per Course

Course Description:

If you’re the CAD Manager for a civil/site firm looking to optimize your standards and increase productivity, this class was designed with you in mind. This Civil 3D file- and process-focused course shows you how to develop and implement system-wide standards and changes that will have a dramatic impact on your firm’s bottom line. Even the most experienced Civil CAD Managers will walk away from this class with new ideas on how to improve their current systems.

Session 1: Sheet Set Manager for Civil 3D

• Understanding Sheet Sets

• Working with Sheet Sets

• Creating Sheet Sets

• Creating Sheet Sets with Templates

Session 2: Drawing Borders Simplified

• Creating Basic Borders

• Attributes & Fields

• Linking to Sheet Set Manager

• Working With Xref Borders

• Options for Distributing Borders

• Integrating Dynamic Blocks Into Borders

Session 3: Drawing Templates

• Template Storage and Sharing

• Master Templates vs. Multiple Templates

• Border Size Based Templates

• Location Based Templates

• Process Based Templates

• Templates for Plan, Section, and Profile Production

• Common Properties for Templates

• Template Layer Controls & Annotation Styles

Session 4: Managing Standard Details & Blocks

• Building Standardized Details Structure

• Creating and Controlling Block Libraries

• Working with Tool Palettes

• Working with the Design Center

• Building Dynamic Blocks

Course Title: Advanced Corridor Modeling in Civil 3D

Course Length: 8 hours

Minimum Participants: 3

Maximum Participants: 25

Unit of Issue: Per Course

Course Description:

It’s one thing to build a basic, linear, corridor for a residential design, but it’s quite another thing to deal with advanced design conditions like cul-de-sac, intersections, and roundabouts. It’s even an entirely different process when you are rehabilitating an existing roadway. Unfortunately, these advanced techniques are often missing from a designer’s tool kit. Knowing the tools and processes for advanced road condition modeling in C3D is vital for anyone who works with road design on a regular basis, and ZenTek Consultants is here to show you how to use Civil 3D to make that design process simple and accurate.

Session 1: Working with Cul-de-sacs

• Creating and working with Regions

• Building Cul-de-sac Profiles

• Creating Cul-de-sac Assemblies

• Creating and working with multiple Baselines

• Adding Multiple Assemblies to a design

Session 2: Working with Intersections

• Understanding the Intersection Wizard

• Setting Offsets and Targets

• Working with Regions

• Understanding, creating, and assigning Assembly Sets

• Creating and fine-tuning intersection Surfaces

Session 3: Working with Rehab Corridors

• Road Rehab Concepts Explained

• Existing Design Elements for Rehab Corridors

• Creating a New Rehab Corridor

• Basic Rehab Corridor Controls

• Advanced Rehab Control Parameters

Session 4: Working with Roundabouts

• Understanding Roundabouts

• Creating the Roundabout Geometry

• Building and Editing Approach Profiles

• Generating Roundabout Corridors

Course Title: Roadway Rehab Corridors in Civil 3D

Course Length: 8 hours

Minimum Participants: 3

Maximum Participants: 25

Unit of Issue: Per Course

Course Description:

Road repair/rehabilitation is one of the most common, and often most difficult, processes to work with inside of Civil

3D. Milling, overlay, leveling, widening . . . all these basic road design features have been a struggle inside the Civil

3D environment for years. Many firms have given up trying to work Rehab projects with Civil 3D entirely! The good news is that with the introduction of the Rehab Corridor tool in Civil 3D 2018, it’s incredibly simple to develop flexible, editable, and intelligent Rehab models and surfaces. Single lane, multi-lane, variable widths and intermittent patching can all be handled in minutes with the Rehab Corridor tool, and this class will take you through the entire process of working with it, from initial design to generating final Mill & Leveling reports.

Session 1: Corridor Basics

• Creating Required Components for Corridors

• Creating Assemblies

• Creating Corridors

• Working with Corridor Regions

• Working with Corridor Targets

Session 2: Understanding Rehab Corridors

• Road Rehab Concepts Explained

• Existing Design Elements for Rehab Corridors

• Creating a New Rehab Corridor

• Basic Rehab Corridor Controls

Session 3: Rehab Corridor Design

• Advanced Rehab Control Parameters

• Ideal Slope and Tolerance

• Rehab Lane and Edge Targets

• Working with Multiple Lanes

Session 4: Finalizing Rehab Designs

• Finding and Editing Rehab Sub-Assemblies

• Roadway Widening and Daylighting

• Integrating Rehab and Standard Corridors

• Using Rehab Manager

• Generating Reports

Course Title: Storm and Sanitary Analysis Simplified in Civil 3D

Course Length: 8 hours

Minimum Participants: 3

Maximum Participants: 25

Unit of Issue: Per Course

Course Description:

Are you still using out-of-date software like HEC-RAS, StormCAD, or Hydraflow to try to integrate your hydrology designs with Civil 3D? Are you wasting countless hours manually marking up hard copies of files to get your storm and wastewater design information into construction documents? Stop carrying multiple software licenses and losing hundreds of man-hours on every project by using Storm and Sanitary Analysis (SSA) - Civil 3D’s built-in hydrology package. We can train your hydrology and design staff on the use of this powerful package, that you already have if you own Civil 3D! Why not use a hydrology system that is designed to dynamically integrate and update all your Civil

3D pipe networks and labeling?

Session 1: Pre-Development Watersheds

• Creating Pre-Dev Watersheds in Civil 3D

• Generating TOC Lines

• Importing Soils Information

• Running SSA Stand-Alone

• Building a Pre-Dev Detention Pond in SSA

Session 2: Post-Development Watersheds

• Creating Post-Dev Watersheds in Civil 3D

• Building a Post-Dev Detention Pond in SSA

• Sizing and Editing Detention Ponds in SSA

• Working with Stage Storage Tables

• Outlet Control Structures in SSA

• Reports in SSA

Session 3: Inlet and Pipe Design in Civil 3D

• Building Pipe Parts Lists in C3D

• Setting up Migration Defaults

• Drawing a Pipe Network in C3D

• Exporting Pipe Networks to SSA

Session 4: Inlet and Pipe Design in SSA

• Analysis and IDF Curve Settings

• Structure and Conveyance Controls

• Connecting Sub-Basins and Structures

• Working with By-Pass Flow

• Network Analysis and Sizing Process

• Reports in SSA

• Exporting Design to a File

• Importing Designs and updating Civil 3D

AUTODESK REVIT COURSES

Course Title: Autodesk Revit Exploring the Essentials

Course Length: 8 hours

Minimum Participants: 3

Maximum Participants: 25

Unit of Issue: Per Course

Course Description:

The design world has made the shift to BIM and working in 3D systems like Autodesk Revit is vital to every firm’s growth, and every designer’s career. The problem is that many folks have been thrown into the Revit world with no more than a quick overview, and in many cases a “figure it out as you go” directive from above. Understanding the basic concepts, controls, and features of Revit is vital. Even those who’ve been working in Revit for a while often don’t know about, or fully understand, some of the basic concepts needed in order to be productive. From initial project setup, through basic views, annotations, and working with linked Models this class is a must for every Revit user out there. This class will help you, and your firm, comfortably make the move from out-of-date 2D CAD work to the world of 3D BIM in Revit, making you confident in your understanding and capabilities.

Session 1: Understanding the Basics

• Starting a Project

• Understanding the User Interface

• View Controls

• Levels and Grids

• Creating Views – Sections & Elevations

Session 2: File Linking and Visibility Graphics

• Understanding Linked Models

• Object Styles and Visibility Graphics

• Detail Levels

• View Range

• View Templates

Session 3: Model Objects

• Parameter Types

• Creating System Families

• Loading Component Families

• Modify Tools

Session 4: Annotations & Schedules

• Creating Detail & Drafting Views

• Text Annotation

• Dimensions

• Tags and Schedules

• Creating Sheets

Course Title: Revit Electrical Essentials

Course Length: 8 hours

Minimum Participants: 3

Maximum Participants: 25

Unit of Issue: Per Course

Course Description:

Sometimes it seems the Revit training world ignores electrical work. They focus on architecture and, if you’re lucky, MEP, but they somehow always seem to gloss right over the “E” in that word, throwing in a few quick minutes discussing what it can do, but never showing you how. This course is designed specifically for those who make their living in the electrical side of the MEP world, and who need detailed instruction on how to make effective use of the powerful tools inside Revit for your own particular industry. If you’re looking to reduce model production times, and increase the quality of your output, this class from ZenTek consultants is exactly what you need.

Students should have a solid understanding of Revit or have taken the Autodesk Revit Exploring the Essentials course.

Session 1: The Basics

• Overview of User interface

• Starting a Project

• View Commands

• General Sketching Tools

• Inserting components

Session 2: Links, Views, and Spaces

• Linking in Revit Models

• Setting up Levels

• Copy/Monitor Tool

• Creating Plan Views, Sections and Callout Views

• Preparing Spaces

Session 3: Electrical Systems

• Distribution Systems

• Creating Electrical Circuits

• System Browser

• Adding Cable Trays

• Adding Conduit

• Panel Schedules

Session 4: Generating Construction Documents

• Working with Tags

• Working with Schedules

• Creating Details

• Creating Legends

• Placing views on sheets

• Printing

Course Title: Revit Structure Simplified

Course Length: 8 hours

Minimum Participants: 3

Maximum Participants: 25

Unit of Issue: Per Course

Course Description:

From foundations and footings to trusses and detailed structural connections, this class is custom built for those who work full-time in the structural design world. Revit is the most popular BIM software in the world, and a full understanding of the tools and processes inside of it, as they relate to building structures, is vital to every firm and designer in this industry. If you’re tired of courses that brush past structural work in favor of architectural-focused tools and settings, then this is the course for you. This course was developed entirely around the vital structural processes and tools inside Revit, and how to implement and use them on real world projects. We will show you how to increase productivity and profitability on every one of your structural jobs using the Revit tools you already own.

Students should have a solid understanding of Revit or have taken the Autodesk Revit Exploring the Essentials course.

Session 1: Walls, Slabs and Foundations

• Creating Foundation Walls

• Creating Structural Floors & Slabs

• Adding Foundations & Footings

Session 2: Columns, Beams and Grids

• Placing Columns

• Placing Beams

• Understanding Beams Systems

• Creating Column Grids

Session 3: Connections, Trusses and Rebar

• Understanding Steel Connections

• Working With Trusses

• Working With Rebar

Session 4: Annotations and Schedules

• Creating Annotations & Tags

• Creating Schedules

• Using Graphic Column Schedules

• Creating Details and Framing Elevations

Course Title: Revit Family Fundamentals

Course Length: 8 hours

Minimum Participants: 3

Maximum Participants: 25

Unit of Issue: Per Course

Course Description:

Whether you’re a Revit veteran, or just breaking into the Revit world, Families are a vital component of any workflow.

The Family’s ability to pre-define groups of objects with adjustable parameters is the very heart of Revit. Generating a complete library of Families to address the work that your company focuses on, instead of using generic examples that Autodesk includes with Revit, is the key to efficiency and increased profitability on your design projects.

Understanding how to modify and build your own Families from scratch is a required skill for anyone working in the design world. Whether you’re looking to update your firm’s capabilities, or just looking to increase your personal

Revit skills, ZenTek Consultants is here to help.

Students should have a solid understanding of Revit or have taken the Autodesk Revit Exploring the Essentials course.

Session 1: Family Basics and Ground Rules

• Revit Family Basic Concepts

• Reference Planes vs. Reference Lines

• Workflow and Organization

• Parameters vs. Shared Parameters

• Practical Exercise – Parametric Box with Extrude

Session 2: Modeling for Families

• Creating Solids and Voids

• Working with Angles and Visibility Parameters

• Practical Exercises – CAD Files & Details

Session 3: Nested Families and Basic Formulas

• Understanding Nested Families

• Working with Formulas

• Practical Exercises - Formula and Nested Families

Session 4: Advanced Features

• Working with Advanced Formulas

• Creating MEP Connectors and Parameters

• Understanding Lookup Tables

• Family Quality Control and Organization

Course Title: Revit for Construction

Course Length: 8 hours

Minimum Participants: 3

Maximum Participants: 25

Unit of Issue: Per Course

Course Description:

Revit courses are usually oriented toward architects and design engineers, leaving the practical considerations of the construction world to be figured out on an "as-needed" basis. This class is different. We focus on the practical use of the Revit BIM system for construction use. We won’t show you how to build a model from scratch, we’ll show you how to use an existing BIM to extract the data, build the views, and generate the schedule data you need to build the project in the real world. This course is a must for any general or specialty contractor struggling to make use of the

Revit system to optimize their process and see significant ROI on their technology investments.

Students should have a solid understanding of Revit or have taken the Autodesk Revit Exploring the Essentials course.

Session 1: Using Existing Revit Models

• Saving and Opening Detached Models

• Navigating Existing Views and Sheets

• Understanding Schedules

• Using Existing Data from the Model

Session 2: Creating Views

• Creating and Using Sections

• Creating and Using Elevations

• Creating and Using Details

• Visibility Graphics and Detail Levels

Session 3: Construction Plans

• Generating Views from the Model

• Exporting Views for Use in RFIs

• Creating Quantity Takeoff and Material Schedules

• Generating Shop Drawings

Session 4: Coordination

• Using 3D Views for Coordination and Clash Detection

• Using Section Boxes and Scope Boxes

• Preparing the Model for Export to Navisworks

• Creating a Simple Walk-through

BLUEBEAM REVU COURSES

Course Title: Bluebeam Revu for Beginners

Course Length: 8 hours

Minimum Participants: 3

Maximum Participants: 25

Unit of Issue: Per Course

Course Description:

So, you have Bluebeam Revu, and you know it can do some amazing things to help you with your job, but you’re just not sure how to actually use it. Bluebeam Revu is one of the most powerful tools in the AEC world, providing markup, take-off, estimating, design review, punch list, and collaboration tools all in one affordable system. All too often though, end users are given the software without any type of formal training, or support on how to access and use the tools they’re looking for.

Session 1: Understanding the Tools

• Tabs, Palettes, and Toolbars

• Multiview Tools

• Running Multiple Sessions of Revu

• Navigation and File Access

Session 2: Working with Markups

• Text-Based Editing/Markup Tools

• Graphic Review/Markup Tools

• Controlling Markup Display Properties

• Working With Stamps

Session 3: Intelligent Markups

• Working With Layers & Display Controls

• Adding Hyperlinks and Images

• Controlling Markup Status

• Cutting/Erasing PDF Content

• Flattening Markups

Session 4: Bluebeam Studio for Collaboration

• Understanding Sessions

• Understanding Projects

• Sharing/organizing files

• Real-Time File Sharing and Editing

• Studio Security Settings

Course Title: Bluebeam Revu for Takeoff and Estimating

Course Length: 8 hours

Minimum Participants: 3

Maximum Participants: 25

Unit of Issue: Per Course

Course Description:

So, you have Bluebeam Revu, and you’re ready to take it to the next level? Ready to move beyond basic markup and commenting, and into the world of detailed quantity takeoff? Bluebeam Revu has a powerful array of tools to help you do exactly that, as well as tools and functions you probably aren’t even aware of. Stop struggling to figure out

Revu’s processes on your own and stop losing both time and money in the process. This class will take you through

Revu’s most powerful quantity takeoff features and show you exactly how to use them and adapt their properties to your firm’s specific needs.

Session 1: Measurement & Takeoff Tools

• PDF Scaling and Calibration

• Linear Measurement Tools

• Area and Volume Tools

• Item Counts and Search Tools

Session 2: Measurement Properties

• Segment Lengths and Drop/Riser Values

• Applying Slopes to Areas

• Split, Merge, and Continue Counts

• Using Multiple Viewports at Differing Scales

• Editing Actions for a Measurement

Session 3: The Markups List

• Grouping and Sorting Takeoff Items

• Controlling Column Display

• Working with Custom Columns

• Working With Status Models and States

• Adding Comments and Replies to Markups

• Importing and Exporting Markups Between Files

• Extracting Takeoffs to Excel & PDF

Session 4: Spaces and Places

• Creating and Labeling Spaces

• Nesting Spaces

• Using Spaces in Markups List

• Creating and Naming Places

Course Title: Bluebeam Revu for Electrical

Course Length: 8 hours

Minimum Participants: 3

Maximum Participants: 25

Unit of Issue: Per Person

Course Description:

Bluebeam Revu is the most popular, and powerful, estimating and markup tool on the market today, and it’s ideal for customizing to industry specific needs. Right out-of-the box, Revu tools work wonders for anyone in the Electrical industry. Add in a little more knowledge, and you can make Bluebeam Revu the primary tool for all your Electrical work, with custom tools, features, and calculations that can save you thousands of man-hours each year. This course will show you how to optimize, and customize, Bluebeam Revu specifically for use in the Electrical industry.

Session 1: Preparing Electrical Documents

• Calibrating and Scaling Site Documents

• Defining Spaces and Places

• Linking to Places and Spaces

• Generating Bookmarks

Session 2: Common Tools for Electrical Work

• Creating and Re-Using Notes and Callouts

• Adding “to Scale” Markups and Sketches

• Working with Images and Photos

• Linking to Specifications, Details, and Files

Session 3: Electrical Related Functionality

• Working with Area and Perimeter Measurements

• Working with Wiring and Conduit

• Counting Lights, Fixtures and Switches

• Working with Lighting Legends

• Creating and Working with Layers

Session 4: Custom Electrical Tool Chests

• Creating Custom Electrical Tool Chests and Symbols

• Building Electrical Focused Takeoff Tools

• Distributing Tool Chests for Office & Field Work

• Creating Custom Columns & Statuses https://www.zentekconsultants.net 866-824-4459 Copyright © 2023 ZenTek, LLC. All Rights Reserved

AutoCAD Mastering the Basics I Online Course

Are you an AutoCAD novice? Do you want to know how to open, print, and do some basic editing of

AutoCAD files? Looking to improve your technical skills so you can handle basic design changes to

AutoCAD line work without involving your design staff? Then this class is for you!

This is a beginner level course.

Course Curriculum

Session 1: Understanding the Basics

• Opening/Saving AutoCAD Files

• Using the AutoCAD User Interface

• Working with View and Zoom Controls

• Drafting Primitives (Lines, Arcs, Shapes, etc.)

• Understanding Concepts of Scale

• Working with Model and Paper Space

Session 2: Editing Essentials

• Understanding SNAP and OSNAP Tools

• Grip Editing and Control of Objects

• Working with Basic Editing Tools (Move, Copy, Rotate, etc.)

• Working with Object Selection Tools

• Controlling Object Properties

Session 3: Beginning to Draft

• Understanding and Controlling Layers and Linetypes

• Working with Hatch Patterns

• Working with Grouped Objects

• Creating and Using Named Blocks

• Editing and Re-Defining

Blocks Session 4: Annotation Tools

• Understanding Text and Dimension Styles

• Adding Text Annotations to a Drawing

• Adding Dimension Annotation to a Drawing

• Working with Associative Annotations https://www.zentekconsultants.net/

Are you an AutoCAD beginner, who can handle basic drafting, but want to move your skills to the next level? Do you want to know how to comfortably work with advanced polyline tools, attributed blocks, layer filters, and external references so you can be a more proficient drafter? Then this class is for you!

Session 1: Working with Polylines

• 2D Polyline Advanced Controls

• Polyline Editing Tools

• Polyline System Settings

• Working with 3D Polylines

Session 2: Working with Blocks and Attributes

• Block Definition Controls

• Using the Block Editor

• Defining Attributes

• Combining Blocks and Attributes

• Editing Attributes

Session 3: Advanced Layer Controls and Filters

• Layer Toolbars and Access

• Understanding Layer Controls

• Working with Property Filters

• Working with Group Filters

• Layer Controls via Viewport

Session 4: Working with Xrefs and Underlays

• Understanding Xref Concepts

• Overlay vs. Attachment Xrefs

• Xref Pathing and Controls

• Working with Underlays (PDF, DGN, DWF)

Introduction to AutoCAD Civil 3D

Are you - or any of your staff - new to AutoCAD Civil 3D, or just looking to expand your understanding of this powerful design/drafting tool for the Civil/site industry? Maybe you’re just a periodic Civil 3D user, who wants to make yourself more valuable to the company, or improve your skill set for personal growth. Whatever the case, this class is ideal for anyone who wants to get a solid introduction to the most powerful site design package on the market.

Session 1: The AutoCAD Civil 3D Environment

• What is Civil 3D

• Understanding Dynamic Objects

• Understanding the User Interface

• Working with the Civil 3D Toolspace

• Understanding Label and Display

Styles Session 2: Drawing Creation, Setup &

Settings

• Start, Learn, & Create Tabs

• Working With Templates

• Drawing Scale and Map Zones

• Default Settings

• Understanding the Settings Tab

• Importing/Exporting Settings and Styles

Session 3: Understanding Civil 3D Objects &

Tools

• Object Types Explained

• Context Sensitive Ribbons

• Civil 3D Annotation Tools

• Civil 3D Tables

• Analysis and Query Tools

Session 4: Project & Data Management

• Understanding & Creating Civil 3D Projects

• Sharing Civil 3D Data

• Working With Data Shortcuts

• Working With Xref Structure in Civil 3D

Your Kick-Start into AutoCAD Civil 3D Do you - or any of your staff – need a kick-start in AutoCAD Civil 3D? Perhaps you need to get some hands-on experience and understand how projects come together to move forward in Civil 3D. Maybe you’re proficient in AutoCAD, but Civil 3D seems ominous. Whatever the case, this class will help break the ice for anyone who needs to start using the most powerful site design package on the market.

Session 1: The AutoCAD Civil 3D Environment

• Understanding Dynamic Objects

• Getting to Know the User Interface

• Creating Label and Display Styles

• Working with Surfaces

Session 2: Drawing Creation & Linear Design

• Start, Learn & Create Tabs

• Setting Up Templates

• Using Drawing Scale and Map Zones

• Working with Alignments and Profiles

• Creating Data Shortcuts and References

Session 3: Understanding 3D Design

• Setting Up Assemblies and Corridors

• Working with Corridor Surfaces

• Plotting Sections

• Using Analysis and Query Tools

Session 4: Designing Gravity & Pressure Systems

• Understanding Part Catalogs

• Assembling Part Lists

• Laying Out Pipe Runs

• Pipe Runs in Profile View

Civil 3D for Public Works Have you ever noticed that the objective of most introductory AutoCAD Civil 3D classes is to educate on all areas of the software and not on the specific tools you need? If you work in a public works organization and want to learn AutoCAD Civil 3D, then this is the class for you. ZenTek Consultants will help you fully understand the tools you’ll need to build projects in-house and to review or update submitted projects from outside consultants. We’ll cover how to complete roadway and utility projects in

Civil 3D, construct a collaborative model, and integrate design elements from various disciplines into one cohesive design.

Session 1: Alignments and Profiles

• Using GIS surfaces as a basis for planning a design

• Creating intelligent alignments for roadway or utility design

• Modifying the geometry and properties of an alignments

• Setting up profiles in profile views for vertical design

• Designing and modifying vertical alignment geometry

Session 2: Corridors

• Creating…