MAS - Inovativ Inc. - 47QTCA23D005A

GENERAL SERVICES ADMINISTRATION

FEDERAL SUPPLY SERVICE

AUTHORIZED FEDERAL SUPPLY SCHEDULE PRICE LIST

On-line access to contract ordering information, terms and conditions, up-to-date pricing, and the option to create an electronic delivery order are available through GSA Advantage!, a menu-driven database system. The Internet address for GSA Advantage! is: http://www.gsaadvantage.gov

FEDERAL SUPPLY SCHEDULE CONTRACT SCHEDULE TITLE:

THE MULTIPLE AWARD SCHEDULE (MAS)

Large Category: Office Management and Information Technology

CONTRACT NUMBER:

47QTCA23D005A

PERIOD COVERED BY CONTRACT:

01/26/2023 - 01/26/2028

INOVATIV INC

1500 W Mckinley St.

Azusa, CA 91702-3218

(P) 626-969-5300

(F) 202-296-5506 https://www.inovativ.com/

Contractor’s Administration Source:

Patrick Blewett 626-969-5300 pat@inovativ.com

General Services Administration

Price list current as of Modification #PS-0007 Effective 03/26/2024

Business Size: Small Business

For more information on ordering from Federal Supply Schedules go to the GSA Schedules page at GSA.gov.

INOVATIV, INC 47QTCA23D005A 2 | P a g e

CUSTOMER INFORMATION

1a. Table of awarded special item number(s) with appropriate cross-reference to item descriptions and awarded price(s).

SIN SIN Description

333316P Photographic Supplies

33411 Purchasing of New Electronic Equipment

1b. Identification of the lowest priced model number and lowest unit price for that model for each special item number awarded in the contract. This price is the Government price based on a unit of one, exclusive of any quantity/dollar volume, prompt payment, or any other concession affecting price. Those contracts that have unit prices based on the geographic location of the customer, should show the range of the lowest price, and cite the areas to which the prices apply.

Please see awarded pricing table

1c. If the Contractor is proposing hourly rates, a description of all corresponding commercial job titles, experience, functional responsibility, and education for those types of employees or subcontractors who will perform services shall be provided. If hourly rates are not applicable, indicate “Not applicable” for this item.

Please see awarded pricing table

2. Maximum order.

SIN 333316P: $250,000

SIN 33411: $500,000

If the “best value” selection places your order over this Maximum Order identified in this catalog/ pricelist, you have an opportunity to obtain a better schedule contract price. Before placing your order, contact the aforementioned contractor for a better price. The contractor may

(1) offer a new price for this requirement; (2) offer the lowest price available under this contract;

or (3) decline the order. A delivery order that exceeds the maximum order may be placed under the Schedule contract in accordance with FAR 8.404.

3. Minimum order.

$100.00

4. Geographic coverage (delivery area).

50 States including Washington, DC, Hawaii, and Puerto Rico

5. Point(s) of production:

1500 W McKinley St., Azusa, CA 91702-3218

6. Discount from list prices or statement of net price.

Net GSA pricing is listed in the attached pricing table

INOVATIV, INC 47QTCA23D005A 3 | P a g e

7. Quantity discounts.

MONITOR MOUNTING ADDITIONAL 10% / 100 OR MORE

WORKSTATION ACCESSORIES ADDITIONAL 10% / 50 OR MORE

AXIS COMPONENT ADDITIONAL 10% / 50 OR MORE

DIGISYSTEM COMPONENT ADDITIONAL 10% / 50 OR MORE

DIGISYSTEM KIT ADDITIONAL 10% / 50 OR MORE

WORKSTATION ADDITIONAL 15%/ 50 OR MORE

WORKSTATION ADDITIONAL 18%/ 50 OR MORE

ACCESSORY ADDITIONAL 5% / 72 OR MORE

8. Prompt payment terms.

2% Net 10 Days

Information for Ordering Offices: Prompt payment terms cannot be negotiated out of the contractual agreement in exchange for other concessions.

9. Foreign items (list items by country of origin).

NOT APPLICABLE

10a. Time of delivery.

Determined at the Task Order Level

10b. Expedited Delivery.

10c. Overnight and 2-day delivery.

10d. Urgent Requirements.

Contact the contractor for the purpose of requesting accelerated delivery

11. F.O.B. point.

Destination

12a. Ordering address.

1500 W Mckinley St.

Azusa, CA 91702-3218

(P) 626-969-5300

(F) 202-296-5506

12b. Ordering procedures: For supplies and services, the ordering procedures, information on Blanket

Purchase Agreements (BPA’s) are found in Federal Acquisition Regulation (FAR) 8.405- 3.

13. Payment address.

1500 W Mckinley St.

Azusa, CA 91702-3218

(P) 626-969-5300

(F) 202-296-5506

14. Warranty provision.

See Warranty Provision Below

INOVATIV, INC 47QTCA23D005A 4 | P a g e

15. Export packing charges, if applicable.

16. Terms and conditions of rental, maintenance, and repair (if applicable).

17. Terms and conditions of installation (if applicable).

18a. Terms and conditions of repair parts indicating date of parts price lists and any discounts from list prices (if applicable).

18b. Terms and conditions for any other services (if applicable).

19. List of service and distribution points (if applicable).

20. List of participating dealers (if applicable).

21. Preventive maintenance (if applicable).

22a. Special attributes such as environmental attributes (e.g., recycled content, energy efficiency, and/or reduced pollutants).

22b. If applicable, indicate that Section 508 compliance information is available on Electronic and Information Technology (EIT) supplies and services and show where full details can be found (e.g. contractor’s website or other location.) The EIT standards can be found at:

www.Section508.gov/.

23. Unique Entity Identifier (UEI) number:

F74UWDQMU4R3

24. Notification regarding registration in System for Award Management (SAM) database:

Active

INOVATIV INC

Price Offered to GSA including IFF

SIN

MANUFACTURE

R NAME

MFR PART

NO PRODUCT NAME

PRODUCT DESCRIPTION (Provide detailed product description) UOI

DISCOUNT

PRICE

OFFERED TO

GSA (including

IFF)

33411 INOVATIV AE 0040 APOLLO 40 EVO WORKSTATION

WORKSTATION Inovativ's Fully Collapsible, Heavy Duty Apollo 40 Equipment Cart with Non-Height Adjustable Keyboard Top Shelf and 10" Premium Wheels EA $ 3,248.61

33411 INOVATIV AE 0052 APOLLO 52 EVO WORKSTATION

WORKSTATION Inovativ's Fully Collapsible, Heavy Duty Apollo 52 Equipment Cart with Non-Height Adjustable Keyboard Top Shelf and 10" Premium Wheels EA $ 3,550.88

33411 INOVATIV DEP 0001 DEPLOY WORKSTATION

WORKSTATION Inovativ's Semi-Enclosed Vertical Cart that provides 16 RU of rackspace split into two 8 RU Sections EA $ 2,644.08

33411 INOVATIV E 0036 ECHO 36 WORKSTATION

WORKSTATION Inovativ's Semi-Collapsible Echo 36 Equipment Cart with Height Adjustable Keyboard Top Shelf, Combo Locking Top and Bottom Drawers, and 10" Premium Wheels EA $ 3,173.05

33411 INOVATIV E 0048 ECHO 48 WORKSTATION

WORKSTATION Inovativ's Semi-Collapsible Echo 48 Equipment Cart with Height Adjustable Keyboard Top Shelf, Combo Locking Top and Bottom Drawers, and 10" Premium Wheels EA $ 3,248.61

33411 INOVATIV 501-030

INSIGHT MONITOR MOUNTING

SYSTEM FOR DEPLOY GEN IV

MONITOR MOUNTING Inovativ's Insight Monitor Mounting System with 2 Pro Ultra Arms for Deploy Vertical Cart EA $ 1,176.02

33411 INOVATIV 501-042

INSIGHT MONITOR MOUNTING

SYSTEM FOR APOLLO 40

MONITOR MOUNTING Inovativ's Insight Monitor Mounting System with 2 Pro Ultra Arms for Apollo 40 Equipment Carts EA $ 1,176.02

33411 INOVATIV 501-052

INSIGHT MONITOR MOUNTING

SYSTEM FOR APOLLO 52

MONITOR MOUNTING Inovativ's Insight Monitor Mounting System with 2 Pro Ultra Arms for Apollo 52 Equipment Carts EA $ 1,232.44

33411 INOVATIV 501-053

INSIGHT MONITOR MOUNTING

SYSTEM FOR APOLLO 52 FOR 3

MONITORS

MONITOR MOUNTING Inovativ's Insight Monitor Mounting System with 3 Pro Ultra Arms for Apollo 52 Equipment Carts EA $ 1,409.77

33411 INOVATIV 501-000 INSIGHT CARRYING CASE

MONITOR MOUNTING Inovativ's Insight Carrying Case Is Outfitted With Die-Cut Foam In Effort To Safetly Transport Inovativ's Insight Monitor Mounting Systems And Is 100% Dustproof And Waterproof EA $ 386.10

33411 INOVATIV 501-070

PRO ULTRA ARM FOR INSIGHT

MONITOR MOUNT SYSTEM

MONITOR MOUNTING Inovativ's Pro Ultra Arm for Insight Mounting Systems, Includes System Bracket EA $ 369.97

33411 INOVATIV 501-075

SYSTEM BRACKET FOR INSIGHT

MONITOR MOUNT SYSTEM

MONITOR MOUNTING Inovativ's System Bracket Can Be Used To Mount Additional 3rd Party Products to Inovativ's Insight System EA $ 95.92

33411 INOVATIV 501-001

BABY PIN ATTACHMENT FOR

INSIGHT MONITOR MOUNT SYSTEM

MONITOR MOUNTING Inovativ's Baby Pin Attachment Can Be Used To Mount Baby Pin Compatible 3rd Party Products to Inovativ's Insight System EA $ 47.56

33411 INOVATIV 501-105 BOA UNIVERSAL VESA SYSTEM

MONITOR MOUNTING Inovativ's 55lb Weight Capacity Articulating Monitor Arm for Inovativ Cart Workstations EA $ 587.61

33411 INOVATIV 501-305

MANTIS 30 UNIVERSAL VESA

SYSTEM

MONITOR MOUNTING Inovativ's 35lb Weight Capacity Gas Cylinder, Floating Monitor Arm for Inovativ Cart Workstations EA $ 748.82

33411 INOVATIV 501-405

SIDEWINDER UNIVERSAL VESA

SYSTEM

MONITOR MOUNTING Inovativ's 27lb Weight Capacity Articulating Monitor Arm for Inovativ Cart Workstations EA $ 458.64

33411 INOVATIV 501-600 PRO MONITOR MOUNT VESA

MONITOR MOUNTING The Inovativ Pro Monitor Mount mounts on industry standard 5/8" (Baby) pins and supports monitors with a 100 x 100 VESA mounting pattern. The sturdy mount is made from 6061 aluminum and stainless steel components and is anodized black and orange. The design of the mount allows you to freely rotate the monitor and lock it in either horizontal or vertical orientation. The mount also features a lockable-tilt axis. EA $ 179.97

SIN

MANUFACTURE

R NAME

MFR PART

NO PRODUCT NAME

PRODUCT DESCRIPTION (Provide detailed product description) UOI

DISCOUNT

PRICE

OFFERED TO

GSA (including

IFF)

33411 INOVATIV 501-610 QR SYSTEM

MONITOR MOUNTING he Inovativ QR VESA System allows you to attach a monitor to a VESA mount by quick release and to just as easily remove it. It was designed to let you quickly move a monitor between different VESA mounts on set, or to easily remove your monitor to transport it to another location. Monitors are normally screwed into a VESA mount, and the QR VESA System provides a quick release solution. The QR VESA System provides a universal solution that allows for efficiency and flexibility in virtually any environment, including the home office. EA $ 124.96

33411 INOVATIV 501-611 QR PRO SYSTEM

MONITOR MOUNTING The Inovativ QR Pro VESA System is a male/female plate system for attaching your monitors to VESA mounts by quick release. The standard QR VESA System includes one male and one female plate, but this Pro version features two receiver plates so you can move your monitor between two VESA mounts (such as the Inovativ Pro Monitor Mount for production carts). A spacer plate is also included that may be necessary for monitors with recessed mounting areas. EA $ 187.83

33411 INOVATIV 300-030

VOYAGER 30 - OVERTUBE

CROSSBAR

WORKSTATION ACCESSORIES Machined from T6 Aircraft Aluminum, its light weight, strong, and rigid. The Voyager Workstation is equipped with 2 already. But if you're looking to add another, this is the item you'll need. EA $ 102.09

33411 INOVATIV 300-036

VOYAGER 36/42 - OVERTUBE

CROSSBAR

WORKSTATION ACCESSORIES Machined from T6 Aircraft Aluminum, its light weight, strong, and rigid. The Voyager Workstation is equipped with 2 already. But if you're looking to add another, this is the item you'll need. EA $ 115.79

33411 INOVATIV 300-040

APOLLO 40/52 - OVERTUBE

CROSSBAR

WORKSTATION ACCESSORIES Machined from T6 Aircraft Aluminum, its light weight, strong, and rigid. The Apollo Workstation is equipped with 2 already. But if you're looking to add another, this is the item you'll need. EA $ 122.64

33411 INOVATIV 300-285

LONG CROSSBAR FOR

ECHO/RANGER 36/48

WORKSTATION ACCESSORIES Machined from T6 Aircraft Aluminum, its light weight, strong, and rigid. The Echo Workstation is equipped with 1 already. But if you're looking to add another, this is the item you'll need. EA $ 102.09

33411 INOVATIV 300-290

SHORT CROSSBAR FOR

ECHO/RANGER 36/48

WORKSTATION ACCESSORIES Machined from T6 Aircraft Aluminum, its light weight, strong, and rigid. The Echo Workstation is equipped with 1 already. But if you're looking to add another, this is the item you'll need. EA $ 88.38

33411 INOVATIV 300-400 QUICK GRIPS - BLACK

WORKSTATION ACCESSORIES The Inovativ Quick Grips are a pair of handgrips designed to attach to the vertical poles of any Inovativ Echo, Ranger, Scout, or Voyager workstation. With the top shelf of the cart first removed, the Quick Grips slide and securely lock onto the poles. They can individually be set at any height along the poles as well as adjusted to any horizontal angle. EA $ 88.38

33411 INOVATIV 300-500

OVERTUBE STYLE QUICK GRIPS -

BLACK

WORKSTATION ACCESSORIES The Inovativ Overtube Quick Grips are a pair of handgrips designed to attach to the vertical poles of any Inovativ Apollo, Echo, Ranger, Scout, Voyager, or Deploy workstation. They feature an overtube style design that clamps to anything round that is 1.5IN. in diameter. EA $ 108.94

SIN

MANUFACTURE

R NAME

MFR PART

NO PRODUCT NAME

PRODUCT DESCRIPTION (Provide detailed product description) UOI

DISCOUNT

PRICE

OFFERED TO

GSA (including

IFF)

333316P INOVATIV 500-000

CAMERA MOUNT SYSTEM APOLLO /

VOYAGER

WORKSTATION ACCESSORIES The Inovativ Camera Mount System for Apollo and Voyager Carts is compatible with all versions of these carts. The system allows you to attach a 100mm, 150mm, Mitchell, or Touch'N'Go compatible tripod head / receiver to the cart for maximum efficiency in assembling your cinema camera. This system does not include the 100mm, 150mm, Mitchell, or Ronford Baker Plates, needed to mount the relevant tripod heads.

Pletes are sold separately. EA $ 314.48

333316P INOVATIV 500-005

CAMERA MOUNT SYSTEM

ECHO/RANGER 30/36/48

WORKSTATION ACCESSORIES The Inovativ Camera Mount System for Echo and Ranger Carts is compatible with all versions of these carts. The system allows you to attach a 100mm, 150mm, Mitchell, or Touch'N'Go compatible tripod head / receiver to the cart for maximum efficiency in assembling your cinema camera. This system does not include the 100mm, 150mm, Mitchell, or Ronford Baker Plates, needed to mount the relevant tripod heads. Pletes are sold separately. EA $ 362.44

333316P INOVATIV 500-100 MITCHELL PLATE AND HARDWARE

WORKSTATION ACCESSORIES The Inovativ Mitchell Plate is designed to attach to the Inovativ Horseshoe Mount to support Mitchell base tripod heads and camera supports. It comes with the required screws to attach to the Horseshoe Mount. EA $ 67.83

333316P INOVATIV 500-115 1.75IN ALUMINUM MAST

WORKSTATION ACCESSORIES 1.75In aluminum mast can be used in combination with other accessories to form a camera mount system or tripod system. EA $ 95.23

33411 INOVATIV 500-134 MEDIUM CABLE HOOKS

WORKSTATION ACCESSORIES Designed for keeping your cables organized, these Medium Cable Hooks secure directly to the Accessory Cross Bar of any Inovativ cart, hanging from the cross bar to hold your cables. At 6.75 x 3.38", these medium hooks are 2.5" shorter than the large ones, as well as about 1" less in width. EA $ 67.83

33411 INOVATIV 500-135 LARGE CABLE HOOKS

WORKSTATION ACCESSORIES Organize and store your cables with a pair of black 4" Cable Hooks from INOVATIV. These hooks are designed to mount to an INOVATIV Accessory Cross Bar, keeping cables at the ready and off the floor to save time and protect them from possible damage and dirt. For strength and durability, the hooks are constructed from 6061 T6 aircraft aluminum. EA $ 81.53

33411 INOVATIV 500-145

STAND HANGER FOR

ECHO/RANGER

WORKSTATION ACCESSORIES The Inovativ Stand Hanger for Echo and Ranger Carts is a black powder-coated 5052 aluminum hanger that sits on the edge of the cart's top shelf. It provides a place to hang your American-made grip stand or any other manufacturer's light or grip stand that utilizes a hanger pin. EA $ 47.27

33411 INOVATIV 500-146 STAND HANGER FOR VOYAGER

WORKSTATION ACCESSORIES The Inovativ Stand Hanger for Scout Carts is a black anodized 5052 aluminum hanger that sits on the edge of the cart's top shelf. It provides a place to hang your American-made grip stand or any other manufacturer's light or grip stand that utilizes a hanger pin. EA $ 40.42

33411 INOVATIV 500-148 STAND HANGER FOR APOLLO

WORKSTATION ACCESSORIES The Inovativ Stand Hanger for Apollo Carts is a black anodized 5052 aluminum hanger that sits on the edge of the cart's top shelf. It provides a place to hang your American-made grip stand or any other manufacturer's light or grip stand that utilizes a hanger pin. EA $ 47.27

SIN

MANUFACTURE

R NAME

MFR PART

NO PRODUCT NAME

PRODUCT DESCRIPTION (Provide detailed product description) UOI

DISCOUNT

PRICE

OFFERED TO

GSA (including

IFF)

33411 INOVATIV 500-160

RONFORD BAKER PLATE AND

HARDWARE

WORKSTATION ACCESSORIES The Inovativ Ronford Baker Plate is designed to attach to the Inovativ Horseshoe Mount to support Ronford Baker quick release systems. It comes with the required screws to attach to the Horseshoe Mount. EA $ 40.42

33411 INOVATIV 500-170

100MM BALL PLATE AND

HARDWARE

WORKSTATION ACCESSORIES The Inovativ 100mm Ball Mount attaches to the optional Inovativ Horseshoe Mount and provides a 100mm bowl to support 100mm ball tripod heads. It comes with the required screws to attach to the Horseshoe Mount. EA $ 108.94

33411 INOVATIV 500-171

150MM BALL PLATE AND

HARDWARE

WORKSTATION ACCESSORIES The Inovativ 150mm Ball Mount attaches to the optional Inovativ Horseshoe Mount and provides a 100mm bowl to support 150mm ball tripod heads. It comes with the required screws to attach to the Horseshoe Mount. EA $ 156.90

33411 INOVATIV 500-225 MEDIUM TROUGH FOR VOYAGER

WORKSTATION ACCESSORIES Compatible with all versions of the Voyager equipment cart, this medium-sized Inovativ Utility Trough, measuring 18 x 6 x 4", offers convenient storage for tools, adapters, and accessories. It easily mounts onto the edge of your cart's top shelf and requires no permanent modification. EA $ 163.75

33411 INOVATIV 500-250 MEDIUM TROUGH FOR APOLLO

WORKSTATION ACCESSORIES Designed for Apollo equipment carts, the medium Inovativ Utility Trough measures 18 x 6 x 4" and offers convenient storage for tools, adapters, and accessories. The trough easily mounts onto the edge of your cart's top shelf and requires no permanent modification. EA $ 163.75

33411 INOVATIV 500-260 LARGE TROUGH FOR APOLLO

WORKSTATION ACCESSORIES Designed for Apollo equipment carts, the large Inovativ Utility Trough measures 25 x 7 x 4" and offers convenient storage for tools, adapters, and accessories. The trough easily mounts onto the edge of your cart's top shelf and requires no permanent modification. EA $ 177.45

33411 INOVATIV 500-291

TRIPOD SYSTEM FOR THE RANGER /

ECHO 36,48

WORKSTATION ACCESSORIES The Tripod System for Inovativ Echo and Ranger carts allows you to store your tripod on the cart when the tripod is not being used. The system features a 1.75" mast that secures to your cart and can be adjusted up and down. The included tripod holder attaches to the mast and lets you place a single tripod on it, with or without the tripod head. This system is ideally designed for full-size video tripods and not meant for lightweight photo tripods. EA $ 355.59

33411 INOVATIV 500-320

MEDIUM TROUGH FOR

ECHO/RANGER

WORKSTATION ACCESSORIES The medium 500-320 Standard Trough from INOVATIV is designed to expand the working area of your Ranger/Echo equipment carts by hanging off the edge of the top shelf lip. EA $ 156.90

33411 INOVATIV 500-330

LARGE TROUGH FOR

ECHO/RANGER

WORKSTATION ACCESSORIES The large 500-330 Standard Trough from INOVATIV is designed to expand the working area of your Ranger/Echo equipment carts by hanging off the edge of the top shelf lip. EA $ 177.45

33411 INOVATIV 500-626

MAST RISER SYSTEM FOR APOLLO /

VOYAGER

WORKSTATION ACCESSORIES Inovativ's Mast Riser System for Apollo and Voyager carts, allows you to attach a gimbal dock that uses a 5/8" Baby pin onto the cart, enabling you to mount your gimbal stabilizer on the cart. The Mast Riser System is designed for smaller stabilizers. For larger sled-style stabilizers such as Steadicams, Inovativ recommends the Steadicam System. EA $ 328.18

SIN

MANUFACTURE

R NAME

MFR PART

NO PRODUCT NAME

PRODUCT DESCRIPTION (Provide detailed product description) UOI

DISCOUNT

PRICE

OFFERED TO

GSA (including

IFF)

33411 INOVATIV 500-724

SYSTEM SPACER PLATE FOR

VOYAGER AND APOLLO

WORKSTATION ACCESSORIES Add a spacer when using a C-Stand Storage Clamp with your Apollo or Voyager Cart with this System Spacer Plate from Inovativ.

The plate mounts inside the rim of the cart platform and features mounting threads that match the mounting thumbscrews of the Inovativ C-Stand Storage Clamp. The spacer adds a level of security to the mounting thumbscrews, essentially as a rectangular washer, and to prevent scratching or twisting of the screws on the cart platform. EA $ 19.87

33411 INOVATIV 500-500 BABY PIN SYSTEM

WORKSTATION ACCESSORIES This is a 5/8" Baby Pin System, from Inovativ, for use with any Inovativ cart. It consists of a 30"-long 5/8" baby pin rod and two clamps.

Clamp the 30" baby pin rod to any of the 4 posts of an Inovativ cart and then attach anything compatible on top, such as a laptop tray. Featuring two 3/4" holes, the system allows you to run up to two baby pin rods with full height and swing adjustability. EA $ 170.60

333316P INOVATIV 500-510

HORSESHOE MOUNT FOR 1.75IN

MAST

WORKSTATION ACCESSORIES The Inovativ Horseshoe Mount is designed to attach to an Inovativ 1.75" diameter mast to support various Inovativ camera mounts. Example mounts include the Inovativ Mitchell Plate, Ronford Baker Plate, and 100mm Ball Mount. These optional camera supports come with the necessary screws to secure into the screw holes provided on the Horseshoe Mount. The Horseshoe Mount secures to the mast at the turn of a crank handle on the side. EA $ 122.64

33411 INOVATIV 500-520 CORNER PLUG WITH BABY PIN

WORKSTATION ACCESSORIES Add a male baby pin to your Apollo or Deploy cart or onto your Center Mast Bracket with this Corner Plug with Baby Pin from Inovativ.

The assembly fits into the existing corner plug on the top shelf of your cart and provides an additional 5/8" baby pin mount for a variety of accessories, plates, and mounts that have a 5/8" receiver. It can also mount onto a cart using the Center Mast Bracket 500-790. The pin and plug assembly is made from durable 6061 aluminum. A removal tool is included to remove any plug expansions already in the slot to make it ready for use.

EA $ 47.27

33411 INOVATIV 500-550 CHANNEL BLOCK (1)

WORKSTATION ACCESSORIES The 500-550 Channel Block from INOVATIV provides you with an extra channel block for your Ranger/Echo equipment carts. Channel blocks are used as points to connect bottom mast receivers, Dolly Handles, 4-Post Outriggers, and other accessories. EA $ 54.13

33411 INOVATIV 500-590 HI-HAT RAILS FOR APOLLO

WORKSTATION ACCESSORIES Looking to carry a Hi- Hat board on your Apollo cart? Check out the Inovativ Hi- Hat Rails, a two-rail set that mounts to the underside of the Apollo 40 or Apollo 52 equipment cart for easy and quick access. The rails install easily with six bolts to the dedicated threaded holes. The rails are made from rugged 5052 aluminum construction covered in a durable black powder-coated finish and provide access from either side. EA $ 54.13

33411 INOVATIV 500-725

1.75IN ACCESSORY CROSS BAR

CLAMP

WORKSTATION ACCESSORIES The Inovativ 1.75" Crossbar Clamp attaches tool-free to the crossbar of any Apollo, Echo, Ranger, Scout, or Voyager workstation, and it allows you to insert and secure any Inovativ 1.75" diameter mast (rod). The clamp screws into the crossbar via two knobs, and a third knob on the other side secures the mast. EA $ 67.83

SIN

MANUFACTURE

R NAME

MFR PART

NO PRODUCT NAME

PRODUCT DESCRIPTION (Provide detailed product description) UOI

DISCOUNT

PRICE

OFFERED TO

GSA (including

IFF)

33411 INOVATIV 500-726

C-STAND STORAGE CLAMP (FOR

1.25IN STANDS ONLY)

WORKSTATION ACCESSORIES Inovativ's pair of C- Stand Storage Clamps attach to the crossbar of any Apollo, Echo, Ranger, Scout, or Voyager workstation to support optional 1.25" diameter C-stands. You can use one or both, as your needs require. Mounting screws are included for attaching to the crossbar, and the clamps feature a tightening knob for securing the stand. EA $ 108.94

33411 INOVATIV 500-780 DOLLY HANDLES (2)

WORKSTATION ACCESSORIES The 500-780 Dolly Handles from Inovativ are a set of 2 handles designed to connect to the Accessory Channel Blocks on Ranger and Echo carts. The handles add an additional position for lifting your cart up and over curbs, stairways, and truck beds. EA $ 122.64

33411 INOVATIV 500-785 LOAD HANDLES (2)

WORKSTATION ACCESSORIES Add handles to your Deploy Gen IV cart for easier lifting with this pair of Load Handles from Inovativ. Each handle features an ODI Ruffian lock-on grip, which features a knurled, anti-slip surface for a solid grip. The aluminum handles attach to the cart using integrated screws. EA $ 47.27

33411 INOVATIV 500-790 CENTER MAST BRACKET

WORKSTATION ACCESSORIES Add an accessory to the back of your Deploy Gen IV cart using this Center Mast Bracket from Inovativ. The aluminum bracket attaches to the center of the top frame of the cart using two included screws. Add a boom pole, mast riser, baby pins, handles, and more to extend the accessory possibilities of your cart. The bracket tightens around the accessory using a thumbscrew and it supports up to 60 lb. EA $ 40.42

33411 INOVATIV 500-824 VOYAGER 30 TRAVEL CASE

WORKSTATION ACCESSORIES The Voyager 30 Travel Case from Inovativ is constructed using a soft, durable Cordura nylon that protects a Voyager 30 cart and its accessories from scratches and dents during transport and storage.

The case has a heavy-duty top handle, two side handles, and one front handle to facilitate lifting the case into the back of a truck for transport. A flap on the bottom of the case can be unbuckled to expose the cart's wheels so the case can be wheeled and then buckled closed for storage. A clear plastic shipping pouch is available on the front of the travel case, and there is a business card holder on the side. EA $ 225.41

33411 INOVATIV 500-826 VOYAGER 42 TRAVEL CASE

WORKSTATION ACCESSORIES The Voyager 42 Travel Case from Inovativ is constructed using a soft, durable Cordura nylon that protects a Voyager 42 cart and its accessories from scratches and dents during transport and storage.

The case has a heavy-duty top handle, two side handles, and one front handle to facilitate lifting the case into the back of a truck for transport. A flap on the bottom of the case can be unbuckled to expose the cart's wheels so the case can be wheeled and then buckled closed for storage. A clear plastic shipping pouch is available on the front of the travel case, and there is a business card holder on the side. EA $ 328.18

SIN

MANUFACTURE

R NAME

MFR PART

NO PRODUCT NAME

PRODUCT DESCRIPTION (Provide detailed product description) UOI

DISCOUNT

PRICE

OFFERED TO

GSA (including

IFF)

33411 INOVATIV DCP-1535

1535 DIGICASE PRO WITH CASE

ORGANIZER

DIGISYSTEM COMPONENT Store, transport, and protect your laptop system, accessories, and DSLR/mirrorless gear in the black 1535 DigiCase Pro with TrekPak Organizer from Inovativ. This watertight, dustproof case is made in the USA and has brackets for Pro and Lite Digiplate versions, as well as a TrekPak organizer. Users will appreciate the clear ID window, built-in purge valve, latch closure, and metal lock hasps for optional padlocks. Carry the case with the large top handle or roll it with the trolley handle and built-in wheels. EA $ 497.98

33411 INOVATIV LSK 002 LITE TETHERING WORKSTATION

DIGISYSTEM KIT The Lite Tethering Workstation from Inovativ mounts a laptop onto a cart, tripod legs, or light stand for on-set capture and control convenience. The components of the workstation are made of durable aluminum including the DigiPlate Lite, a pair of universal laptop DigiClamps, the DigiBase, and the DigiBracket.

One advantage of this kit is that it helps avoid having to completely disassemble your system when you need to transport it. The DigiPlate Lite attaches to the DigiBracket, which allows you to mount onto tripod legs to provide a platform for your laptop. The DigiBase can also be used to mount the DigiPlate to a rig clamp, light stand, magic arm, or C-stand using various accessories and adapters. The pair of DigiClamps attach to the bottom of the DigiPlate Lite to secure your laptop so it doesn't slide off. The clamps accommodate laptops from 0.375 to 1" in height. EA $ 324.18

33411 INOVATIV PDK 002

PRO DIGI TETHERING

WORKSTATION

DIGISYSTEM KIT The Pro Digi Tethering Workstation from Inovativ mounts a laptop onto a cart, tripod legs, or light stand for on-set capture and control convenience. The components of the workstation are made of durable aluminum and include the DigiPlate Pro, a pair of universal laptop DigiClamps, a pair of universal accessory DigiClamps, the DigiBase, and the DigiMouse Pad.

One advantage of this kit is that it helps avoid having to completely disassemble your system when you need to transport it. The DigiPlate Pro plate features 161 tapped 3/8"- 16 holes providing a wide variety of mounting options for your laptop, such as onto tripod legs, carts, light stands, or C-stands. The DigiBase is a baby-pin adapter that features a 3/8"-16 thumbscrew and can be used to mount the DigiPlate Pro onto a C-stand or other mounting options using various accessories and adapters.

The pair of DigiClamps attach to the DigiPlate Pro to secure your laptop so it doesn't slide off, accommodating laptops from 0.375 to 1" in height. A pair of accessory clamps is also included to secure accessories such as a hard drive or other equipment to the plate. The DigiMouse Pad adds a mouse surface extension that can be installed for right or left hand usage. EA $ 414.86

SIN

MANUFACTURE

R NAME

MFR PART

NO PRODUCT NAME

PRODUCT DESCRIPTION (Provide detailed product description) UOI

DISCOUNT

PRICE

OFFERED TO

GSA (including

IFF)

33411 INOVATIV PK 0001 PRO KIT WITH DIGIBASE

DIGISYSTEM KIT he Inovativ DigiSystem Pro Kit with DigiBase allows you to mount your laptop on 5/8" baby-pin supports such as C-stands and adapters on production carts.

The kit features the DigiPlate Pro mounting plate, which supports up to 16" laptops such as the 16" MacBook Pro.

The DigiPlate Pro is a robust, full size plate offering 161 tapped holes with the 3/8"-16 thread size, and it comes with a 3/8"-16 to 1/4"-20 step-down bushing to let you mount it on tripod plates that have a 1/4"-20 mounting screw.

A set of DigiClamps laptop clamps is included that lets you secure up to 1"-thick laptops to the plate. And the included DigiBase attaches to the bottom of the mounting plate and provides a 5/8" baby-pin mount. As your needs grow, this system can be expanded with additional DigiSystem products, such as a DigiShade. EA $ 293.95

33411 INOVATIV 501-815

DIGICLAMPS - LACIE RUGGED STD |

1IN

DIGISYSTEM COMPONENT This pair of Inovativ DigiClamps can be attached to any DigiPlate to securely hold an optional LaCie Rugged hard drive. They attach with stainless steel thumbscrews and can be positioned in whichever way works best for you. They also feature an open design that allows your drives to remain cool and avoid heat build-up. EA $ 46.37

33411 INOVATIV 501-817

DIGICLAMPS - LACIE RUGGED RAID

| 1.5IN

DIGISYSTEM COMPONENT This pair of Inovativ DigiClamps can be attached to any DigiPlate to securely hold an optional LaCie Rugged RAID hard drive. They attach with stainless steel thumbscrews and can be positioned in whichever way works best for you. They also feature an open design that allows your drives to remain cool and avoid heat build-up. EA $ 46.37

33411 INOVATIV 501-820 DIGICLAMPS - LAPTOP UNIVERSAL

DIGISYSTEM COMPONENT The Inovativ DigiClamps Universal for Laptops is a pair of clamps that can be attached to any DigiPlate to hold your laptop. They support any laptop that's between 0.38 and 1" in thickness, including the MacBook Pro with Touch Bar. The clamps attach with stainless steel thumbscrews anywhere on the DigiPlate, and they feature rubber pads to prevent your laptop from slipping out and from getting scratched. EA $ 85.66

33411 INOVATIV 501-825

DIGICLAMPS - ACCESSORY

UNIVERSAL

DIGISYSTEM COMPONENT The DigiClamps Universal for Hard Drives & Accessories from Inovativ is a pair of clamps that can be attached to any DigiPlate to hold hard drives and accessories measuring 0.5 to 1.5" thick. The two clamps are each a different size for your flexibility, and included shims allow you to make height adjustments for further flexibility. The clamps attach with stainless steel thumbscrews anywhere on the DigiPlate, and they feature rubber pads to prevent your accessories from slipping out and from getting scratched. EA $ 109.24

33411 INOVATIV 501-552 DIGIHANGER

DIGISYSTEM COMPONENT The DigiHanger from Inovativ is designed to attach to the bottom of any DigiPlate and function as a cable management system. It secures to the DigiPlate using an included screw and provides two pass-through holes for running cables or carabiners through them.

The DigiHanger is made from andodized orange 6061 T6 aluminum. EA $ 35.37

SIN

MANUFACTURE

R NAME

MFR PART

NO PRODUCT NAME

PRODUCT DESCRIPTION (Provide detailed product description) UOI

DISCOUNT

PRICE

OFFERED TO

GSA (including

IFF)

33411 INOVATIV 501-553 DIGIMOUSE PAD FOR DIGIPLATES

DIGISYSTEM COMPONENT The Inovativ DigiMouse Pad attaches to the side of the DigiPlate Pro or DigiPlate Lite as an extension, providing a surface for a traditional mouse—for when you want an alternative to using a laptop trackpad. It can be attached to either side of the DigiPlate for left- or right-hand use. While it's made of black anodized aluminum, the mouse surface has a custom design that lets your mouse glide with ease. EA $ 98.24

33411 INOVATIV 501-559 DIGILEGS

DIGISYSTEM COMPONENT The DigiLegs transform the DigiPlate Pro and DigiPlate Lite into a working table. This is especially handy when you have items like the DigiBase and hard drives mounted to the bottom of the DigiPlate. Those items make the bottom uneven when not mounted on a stand or a tripod. The legs elevate the plate, clearing space for items attached underneath the DigiPlate. The bottom of the legs have rubber pads to prevent scratches on delicate surfaces. EA $ 58.94

33411 INOVATIV 555-000 AXIS STAND

AXIS COMPONENT Mount AXIS vDrop workstation accessories and other grip equipment onto the AXIS Stand from Inovativ. This anodized aluminum grip stand features three sections that extend to a maximum 79" tall, and it collapses down to 50.5" when folded. Its dual-reinforced legs provide a solid base to keep from tipping.

The three-section stand is compatible with the separately available heavy-duty 8" caster wheel system that will allow you to transport the stand smoothly across the floor, features foot brakes, and has a footprint of 37.7 x 46.4". Each stand section is secured with a locking knob and the top section features a Junior pin. EA $ 301.51

33411 INOVATIV 555-011 AXIS WEIGHT HANGER

AXIS COMPONENT Use this AXIS Weight Hanger from Inovativ to hang a weight on your AXIS grip stand to keep it stable. The hanger mounts onto the 1" leg of your AXIS or American grip stand and secures with a locking lever. It provides a place to hang the separately available 25 lb AXIS weight bag or other type of weighted bag for stability. EA $ 52.14

33411 INOVATIV 555-012 AXIS 25LB WEIGHT BAG

AXIS COMPONENT With its durable weather-resistant and water-resistant Cordura nylon bag, the 25 lb Weight Bag from Inovativ is a requirement for studios or location safety for stabilizing the AXIS stand or other light stands, booms, tripods, or backgrounds.

The bag features a durable dual-wing outer bag that can hang over a stand leg or base. The bag is weighted with a recycled steel and foam core, and it can be carried or hung with the integrated dual-sided nylon handle. There are a reinforced hole and a loop on the handle that can be used to hang the bag on a hook. EA $ 59.70

33411 INOVATIV 555-015 AXIS TROUGH

AXIS COMPONENT Compatible with the AXIS Stand, this powder-coated black AXIS Trough from Inovativ offers convenient storage for tools, adapters, batteries, and accessories. It quickly installs between the legs of your AXIS Stand and is secured with locking knobs.

The Trough features durable aluminum construction with a powder-coated finish, and it includes a soft carpet lining to prevent noise and scratching of your gear. EA $ 218.39

SIN

MANUFACTURE

R NAME

MFR PART

NO PRODUCT NAME

PRODUCT DESCRIPTION (Provide detailed product description) UOI

DISCOUNT

PRICE

OFFERED TO

GSA (including

IFF)

33411 INOVATIV 555-055

AXIS VDROP RECEIVER WITH 2

CONVI CLAMPS

AXIS COMPONENT Mount and unmount your components with ease using this AXIS vDrop Receiver from Inovativ.

The receiver is compatible with AXIS vDrop components, such as the Case Platform, and allows them to simply "drop" into place and then be secured with a safety pin.

The receiver mounts onto the AXIS Stand with the included mafer clamps, and it can be rotated around the stand for the proper position. The clamps feature an opening that can fit a stand from 0.2 to 2" wide and can hold up to 44 lb. EA $ 225.94

33411 INOVATIV 555-100 WORKSURFACE PRO

AXIS COMPONENT Add a workstation platform to your AXIS Stand or grip stand with this WorkSurface Pro Platform from Inovativ. The platform attaches to any stand or workstation with a 2" diameter using its Inovativ vDrop mount. It features two handles on the sides to raise, lower, or rotate the platform.

The platform can rotate around the stand 360°, and it can be raised to a maximum height of 43" and lowered to a minimum height of 34" while mounted on the stand. The top surface of the WorkSurface Pro is lined with a soft carpet to prevent any scuffing of your gear. It also features a cable management hole to pass cables from your equipment through, such as a keyboard or mouse.

Two mafer clamps are included to mount the platform onto other surfaces and to secure additional accessories. The WorkSurface Pro platform is compatible with the separately available Top Drawer with a three-digit combination lock to secure your gear inside. EA $ 558.44

33411 INOVATIV 555-105

WORKSURFACE PRO DRAWER

(BLACK)

AXIS COMPONENT Add the AXIS Top Drawer to the Inovativ WorkSurface Pro workstation to add lockable storage to your grip rig. This bottom drawer features rails on the sides that slide into the WorkSurface Pro, creating a drawer beneath the top surface.

The drawer features a lock that can be secured and unlocked with a three-digit code. The interior is lined with a soft carpeting and it has a pass-through hole for cable management. EA $ 188.16

33411 INOVATIV 555-110

WORKSURFACE PRO CABLE

MANAGEMENT BRACKET

AXIS COMPONENT Add cable management to your WorkSurface Pro workstation with this Cable Management Bracket from Inovativ. The aluminum bracket attaches to the side or back of the WorkSurface Pro using the two included screws and nuts. There are five slots for cables to clip into and they are marked with numbers one through five for easier management. EA $ 21.91

33411 INOVATIV 555-112 FILLER PLATES (2 PIECE)

AXIS COMPONENT Cover the holes on the back of your WorkSurface Pro with this Filler Plate two-pack from Inovativ. If you don't need to pass cable connections through and want a neater appearance on the back of the WorkSurface Pro, connect this aluminum filler plate to cover each hole on the back for a clean visual and added stability.

Attach each plate to the WorkSurface Pro using the included eight screws and eight nuts. EA $ 25.69

SIN

MANUFACTURE

R NAME

MFR PART

NO PRODUCT NAME

PRODUCT DESCRIPTION (Provide detailed product description) UOI

DISCOUNT

PRICE

OFFERED TO

GSA (including

IFF)

33411 INOVATIV 555-114 NEUTRIK PLATES (2 PIECE)

AXIS COMPONENT Add Neutrik-type holes on the back of your WorkSurface Pro with this Neutrik Plate two-pack from Inovativ. If you need to pass through cable connectors on the back of the WorkSurface Pro, connect a Neutrik plate to cover each opening on the back. Each plate provides three round, Neutrik-size holes for your cabling. Attach each plate to the WorkSurface Pro using the included eight screws and eight nuts. EA $ 25.69

33411 INOVATIV 555-140

2U STATION UPGRADE - (CAN NOT

BE USED WITH TOP DRAWER)

AXIS COMPONENT Upgrade your WorkSurface Pro with additional mounting space with this 2 RU Station Upgrade from Inovativ. The upgrade installs beneath the WorkSurface and provides a 2 RU space for rack mounting.

Mounting threads on the front allow you to secure various devices such as switches, servers, and more. Since it installs in the same location, it cannot be combined with the Top Drawer for the WorkSurface Pro. EA $ 173.05

33411 INOVATIV 555-150

4U STATION UPGRADE - (CAN NOT

BE USED WITH TOP DRAWER)

AXIS COMPONENT Upgrade your WorkSurface Pro with additional mounting space with this 4 RU Station Upgrade from Inovativ. The upgrade installs beneath the WorkSurface and provides a 4 RU space for rack mounting.

Mounting threads on the front allow you to secure various devices such as switches, servers, and more. Since it installs in the same location, it cannot be combined with the Top Drawer for the WorkSurface Pro. EA $ 225.94

33411 INOVATIV 555-200

CASE PLATFORM - INCLUDES V-

DROP AND 2 CONVI CLAMPS

AXIS COMPONENT Add a platform to your AXIS Stand or workstation with this Case Platform from Inovativ. The platform attaches to your stand or workstation using a vDrop mount and includes two mafer clamps to attach to other workstation models. Lay your hard-shell case on top and secure it with separately available tie-down anchors. The platform features an area beneath for an optional Bottom Drawer that offers a three-digit combination lock to secure your gear. EA $ 490.43

33411 INOVATIV 555-205

DRAWER FOR CASE PLATFORM /

DIGI PLATFORM

AXIS COMPONENT Add the AXIS Bottom Drawer to the Inovativ Case or Digi Platform for the DigiCase Pro or similar systems. This bottom drawer features rails that slide into the Case or Digi Platform to create a drawer on the bottom of the system. The drawer features a lock that can be secured and unlocked with a three-digit code. EA $ 225.94

33411 INOVATIV 555-210 TIE-DOWN ANCHORS (4 PIECES)

AXIS COMPONENT Attach tie-down straps to AXIS components, the Case Platform, or the Digi Platform using this four-pack of AXIS Tie-Down Anchors from Inovativ.

The four anchors connect to the sides of the platform using the included screws and nuts, providing holes for separately available S hooks, bungee cord, or straps to tie equipment down onto the platform. EA $ 37.03

333316P INOVATIV 555-316

OFF-SET BABY PIN MOUNT WITH

CONVI CLAMP AND BABY PIN

AXIS COMPONENT This Offset Baby Pin Mount from Inovativ allows you to add a monitor, hang a camera, or mount another type of accessory to the Inovativ AXIS stand or onto a grip stand. The mount includes a spring-loaded mafer clamp that attaches to the stand to offset your gear away from the post. The Baby pin can be extended from 0.2 to 2" from the stand, and the mount supports a maximum load of 44 lb. EA $ 74.81

SIN

MANUFACTURE

R NAME

MFR PART

NO PRODUCT NAME

PRODUCT DESCRIPTION (Provide detailed product description) UOI

DISCOUNT

PRICE

OFFERED TO

GSA (including

IFF)

333316P INOVATIV 555-420 AXIS CAMERA MOUNT SYSTEM

AXIS COMPONENT Mount your handheld camera on the AXIS grip stand when taking a break on set with this AXIS Camera Mount System from Inovativ. The system is made up of two stand-mounting clamps, a mounting rod, and a horseshoe clamp.

The rod attaches vertically to the AXIS Stand with the two stand clamps, and the horseshoe clamp attaches to the rod.

The clamp can then slide up and down and rotate 360° to place your camera at any position on the rod. The clamp accepts separately available camera mounts and plates, allowing you to rest your camera on the stand. Optionally, you can add multiple horseshoe clamps to mount additional camera rigs onto the rod. EA $ 422.42

33411 INOVATIV 105-200

8IN EVO SWIVEL/FIXED WHEEL

REPLACEMENT KIT -

(TIRE/TUBE/HUB)

WORKSTATION ACCESSORIES TIRE, TUBE, AND

WHEEL HUB ASSEMBLY REPLACEMENT KIT FOR

ALL 8IN ALUMINUM EVO WHEEL SYSTEMS. EA $ 108.94

33411 INOVATIV 110-235

10IN RA/ECHO SWIVEL WHEEL

REPLACEMENT KIT -

(TIRE/TUBE/HUB)

WORKSTATION ACCESSORIES TIRE, TUBE, AND

WHEEL HUB ASSEMBLY REPLACEMENT KIT FOR

ALL 10IN SWIVEL ALUMINUM EVO WHEEL

SYSTEMS FOR RANGER, AND ECHO. EA $ 102.09

33411 INOVATIV 110-270

10IN EVO WHEEL REPLACEMENT

KIT - (TIRE/TUBE/HUB)

WORKSTATION ACCESSORIES TIRE, TUBE, AND

WHEEL HUB ASSEMBLY REPLACEMENT KIT FOR

ALL 10IN ALUMINUM EVO WHEEL SYSTEMS. EA $ 102.09

33411 INOVATIV DEP 0005 Deploy Workstation

The Deploy is a mobile workstation with up to 16U of vertical rack-mount space. Ideal for both studio and on-location use, the Deploy is fit for travel with INOVATIV’s EVO Wheel System on the front and 20′′ traction wheels in the rear. EVO Wheels swivel for navigation, include foot brakes for safety, and can be removed if needed. The 20′′ rear wheels improve mobility over uneven surfaces or rugged terrain. EA $ 3,550.88

33411 INOVATIV 501-110

Workstation Monitor Arm System (VESA Compliant)

The Workstation Monitor Arm System is a new, feature rich monitor mounting solution that is compatible with VESA compliant monitors up to 55 lbs. and the full range of INOVATIV workstation carts by clamping directly to the workstation’s upright post.

This new design features locking rosette joints that prevent loosening over time and provide two points of articulation for moving your monitor closer to you, or relocating it out of the way for increased tabletop space. A third point of adjustment is available by moving the Monitor Arm up and down the vertical post, or swinging it side to side. The VESA compliant monitor plate provides smooth 360° rotation as well as pan and tilt adjustability, with the option to lock your monitor in either landscape or portrait orientation. The system allows for a tidy workspace with the included cable management hooks. EA $ 603.78

INOVATIV, INC 47QTCA23D005A 13 | P a g e

MONITOR MOUNTING

Except as otherwise provided below, INOVATIV, Inc. (“INOVATIV”) warrants, to the original user, its workstations and accessory products (other than tires, tubes, and hydraulic brakes) to be free of mechanical defects in material and workmanship under “normal use” (defined below) for the shorter of the following periods: (a) five (5) years from the date placed in service by the original user. INOVATIV warrants its tires and tubes to be free of mechanical defects in material and workmanship under normal use for thirty (30) days from the date placed in service by the original user. In addition, INOVATIV warrants its hydraulic brake system to be free of mechanical defects in material and workmanship under normal use for one (1) year from the date placed in service by the original user

WORKSTATION ACCESSORIES

Except as otherwise provided below, INOVATIV, Inc. (“INOVATIV”) warrants, to the original user, its workstations and accessory products (other than tires, tubes, and hydraulic brakes) to be free of mechanical defects in material and workmanship under “normal use” (defined below) for the shorter of the following periods: (a) five (5) years from the date placed in service by the original user. INOVATIV warrants its tires and tubes to be free of mechanical defects in material and workmanship under normal use for thirty (30) days from the date placed in service by the original user. In addition, INOVATIV warrants its hydraulic brake system to be free of mechanical defects in material and workmanship under normal use for one (1) year from

AXIS COMPONENT

Except as otherwise provided below, INOVATIV, Inc. (“INOVATIV”) warrants, to the original user, its workstations and accessory products (other than tires, tubes, and hydraulic brakes) to be free of mechanical defects in material and workmanship under “normal use” (defined below) for the shorter of the following periods: (a) five (5) years from the date placed in service by the original user. INOVATIV warrants its tires and tubes to be free of mechanical defects in material and workmanship under normal use for thirty (30) days from the date placed in service by the original user. In addition, INOVATIV warrants its hydraulic brake system to be free of mechanical defects in material and workmanship under normal use for one (1) year from

DIGISYSTEM COMPONENT

Except as otherwise provided below, INOVATIV, Inc. (“INOVATIV”) warrants, to the original user, its workstations and accessory products (other than tires, tubes, and hydraulic brakes) to be free of mechanical defects in material and workmanship under “normal use” (defined below) for the shorter of the following periods: (a) five (5) years from the date placed in service by the original user. INOVATIV warrants its tires and tubes to be free of mechanical defects in material and workmanship under normal use for thirty (30) days from the date placed in service by the original user. In addition, INOVATIV warrants its hydraulic brake system to be free of mechanical defects in material and workmanship under normal use for one (1) year from

DIGISYSTEM KIT

Except as otherwise provided below, INOVATIV, Inc. (“INOVATIV”) warrants, to the original user, its workstations and accessory products (other than tires, tubes, and hydraulic brakes) to be free of mechanical defects in material and workmanship under “normal use” (defined below) for the shorter of the following periods: (a) five (5) years from the date placed in service by the original user. INOVATIV warrants its tires and tubes to be free of mechanical defects in material and workmanship under normal use for thirty (30) days from the date placed in service by the original user. In addition, INOVATIV warrants its hydraulic brake system to be free of mechanical defects in material and workmanship under normal use for one (1) year from

WORKSTATION

Except as otherwise provided below, INOVATIV, Inc. (“INOVATIV”) warrants, to the original user, its workstations and accessory products (other than tires, tubes, and hydraulic brakes) to be free of mechanical defects in material and workmanship under “normal use” (defined below) for the shorter of the following…