MAS - Superior Solutions And Insights LLC - 47QTCA21D00FA

AUTHORIZED FEDERAL SUPPLY SERVICE

INFORMATION TECHNOLOGY GSA SCHEDULE MAS CONTRACT NO. 47QTCA21D00FA

PRICELIST

GENERAL PURPOSE COMMERC9IAL INFORMATION TECHNOLOGY

EQUIPMENT, SOFTWARE AND SERVICES

SIN 33411 / 33411 STLOC - PURCHASE OF EQUIPMENT

SIN 811212 / 811212 STLOC - MAINTENANCE OF EQUIPMENT, REPAIR SERVICE, AND

REPAIR PARTS/SPARE PARTS

Superior Solutions and Insights LLC

8 Campus Drive

Parsippany, NJ 07054

Phone: (203) 543-7167 www.ssai-group.com

POC: Don Shownkeen dshownkeen@ssai-group.com

Business Size/Status: Small Disadvantaged Business Contract Number: 47QTCA21D00FA

Period Covered by Contract: 9/22/2021 - 9/21/2026

GENERAL SERVICES ADMINISTRATION

FEDERAL SUPPLY SERVICE

Refresh #26, April 26, 2025

Products and ordering information in this Authorized FSS Information Technology Schedule Pricelist are also available on the GSA

Advantage! System. Agencies can browse GSA Advantage! by accessing the Federal Supply Service’s Home Page via the Internet at http://www.fss.gsa.gov/ http://www.ssai-group.com/ http://www.fss.gsa.gov/

47QTCA21D00F

DETAILED INFORMATION ABOUT SINS OFFERED

SIN 33411/ 33411 STLOC - PURCHASE OF EQUIPMENT

FSC CLASS 7010 - SYSTEM CONFIGURATION

Professional Workstations

Other Systems Configuration Equipment, Not Elsewhere Classified

NOTE: Installation MUST be incidental to, in conjunction with and in direct support of the products sold under SIN 33411of this contract and CANNOT be purchased separately. If the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act apply. In applying the Davis-Bacon Act, ordering activities are required to incorporate wage rate determinations into orders, as applicable.

SIN 811212 / 811212 STLOC - MAINTENANCE OF EQUIPMENT, REPAIR SERVICE, AND REPAIR PARTS/SPARE

PARTS (FPDS Code for Maintenance and Repair Service - J070; FSC Class for Repair Parts/Spare Parts - See FSC Class for basic equipment)

- Maintenance

- Repair Service

- Repair Parts/Spare Parts

47QTCA21D00FA Page i

TABLE OF CONTENTS

INFORMATION FOR ORDERING ACTIVITIES APPLICABLE TO ALL SPECIAL ITEM NUMBERS

1. GEOGRAPHIC SCOPE OF CONTRACT

2. CONTRACTOR'S ORDERING ADDRESS AND PAYMENT INFORMATION

3. LIABILITY FOR INJURY OR DAMAGE

4. STATISTICAL DATA FOR GOVERNMENT ORDERING OFFICE COMPLETION OF STANDARD FORM 279

5. FOB DESTINATION

6. DELIVERY SCHEDULE

7. DISCOUNTS

8. TRADE AGREEMENTS ACT OF 1979

9. STATEMENT CONCERNING AVAILABILITY OF EXPORT PACKING

10. SMALL REQUIREMENT

11. MAXIMUM ORDER

12. ORDERING PROCEEDURES FOR FEDERAL SUPPLY SCHEDULE CONTRACTS

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS REQUIREMENTS

13.1 FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS PUBS)

13.2 FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS)

14. CONTRACTOR TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2001)

15. CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES

16. GSA ADVANTAGE!

17. PURCHASE OF OPEN MARKET ITEMS

18. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

19. OVERSEAS ACTIVITIES

20. BLANKET PURCHASE AGREEMENTS (BPAs)

21. CONTRACTOR TEAM ARRANGEMENTS

22. INSTALLATION, DEINSTALLATION, REINSTALLATION

23. SECTION 508 COMPLIANCE

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES

25. INSURANCE—WORK ON A GOVERNMENT INSTALLATION (JAN 1997)(FAR 52.228-5)

26. SOFTWARE INTEROPERABILITY

27. ADVANCE PAYMENTS

TERMS AND CONDITIONS APPLICABLE TO PURCHASE OF GENERAL PURPOSE COMMERCIAL INFORMATION

TECHNOLOGY EQUIPMENT (SPECIAL ITEM NUMBER 33411/ 33411 STLOC)

TERMS AND CONDITIONS APPLICABLE TO MAINTENANCE, REPAIR SERVICE AND REPAIR PARTS/SPARE PARTS

FOR GOVERNMENT-OWNED GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY EQUIPMENT (AFTER EXPIRATION OF GUARANTEE/WARRANTY PROVISIONS AND/OR WHEN REQUIRED SERVICE IS NOT COVERED BY

GUARANTEE/WARRANTY PROVISIONS)

USA COMMITMENT TO PROMOTE SMALL BUSINESS PARTICIPATION PROCUREMENT PROGRAMS

47QTCA21D00FA Page ii

BEST VALUE BLANKET PURCHASE AGREEMENT FEDERAL SUPPLY SCHEDULE

BASIC GUIDELINES FOR USING “CONTRACTOR TEAM ARRANGEMENTS”

GSA MAS CONTRACT # 47QTCA21D00FA LINE CARD……..……………………………………………………………………19

47QTCA21D00FA Page 3

INFORMATION FOR ORDERING ACTIVITIES

APPLICABLE TO ALL SPECIAL ITEM NUMBERS

SPECIAL NOTICE TO AGENCIES: Small Business Participation

SBA strongly supports the participation of small business concerns in the Federal Supply Schedules Program. To enhance Small

Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.

For orders exceeding the micropurchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage!™ on-line shopping service

(www.fss.gsa.gov). The catalogs/pricelists, GSA Advantage!™ and the Federal Supply Service Home Page (www.fss.gsa.gov) contain information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micropurchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.

1. GEOGRAPHIC SCOPE OF CONTRACT

Domestic delivery is delivery within the 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC, and U.S. Territories.

Domestic delivery also includes a port or consolidation point, within the aforementioned areas, for orders received from overseas activities.

Overseas delivery is delivery to points outside of the 48 contiguous states, Washington, DC, Alaska, Hawaii, Puerto Rico, and U.S.

Territories.

Offerors are requested to check one of the following boxes:

The Geographic Scope of Contract will be domestic and overseas delivery.

The Geographic Scope of Contract will be overseas delivery only.

The Geographic Scope of Contract will be domestic delivery only.

2. CONTRACTOR'S ORDERING ADDRESS AND PAYMENT INFORMATION

CONTRACTOR'S ORDERING ADDRESS: Superior Solutions and Insights LLC

Don Shownkeen

1990 Washington Valley Road #263

Martinsville, NJ 08836

CONTRACTOR’S PAYMENT ADDRESS: Superior Solutions and Insights LLC

Don Shownkeen

1990 Washington Valley Road #263

Martinsville, NJ 08836

Contractors are required to accept credit cards for payments equal to or less than the micro-purchase threshold for oral or written delivery orders. Credit cards will be acceptable for payment above the micro-purchase threshold. In addition, bank account information for wire transfer payments will be shown on the invoice.

The following telephone number(s) can be used by ordering activities to obtain technical and/or ordering assistance:

Don Shownkeen, (203) 543-7167 https://ssaigroup-my.sharepoint.com/personal/etoth_ssai-group_com/Documents/GSA/AppData/Local/Temp/AppData/Local/Temp/Application%20Data/MDM/Desktop/Salesforce%20Merge%20Results/8.8.2006/licenses%20and/or%20maintenance

47QTCA21D00FA Page 4

3. LIABILITY FOR INJURY OR DAMAGE

The Contractor shall not be liable for any injury to ordering activity personnel or damage to ordering activity property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the

Contractor.

4. STATISTICAL DATA FOR GOVERNMENT ORDERING OFFICE COMPLETION OF STANDARD FORM 279

Block 9: G. Order/Modification Under Federal Schedule

Block 16: Data Universal Numbering System (DUNS) Number - 107474613

Block 30: Type of Contractor – B. Small Business

Block 31: Woman-Owned Small Business – Yes

Block 36: Contractor's Taxpayer Identification Number (TIN) – 88-3533376

4a. CAGE Code: 9GBJ8

4b. Contractor has registered with SAM.gov.

5. FOB DESTINATION

6. DELIVERY SCHEDULE

a.TIME OF DELIVERY: The Contractor shall deliver to destination within the number of calendar days after receipt of order

(ARO), as set forth below:

SPECIAL ITEM NUMBER DELIVERY TIME

(Days ARO)

33411 / 33411STLOC 30 Days ARO

811212 / 811212 STLOC To be negotiated with ordering agency

SPECIAL ITEM NUMBER EXPEDITED DELIVERY TIME

33411 / 33411STLOC To be negotiated with ordering agency

SPECIAL ITEM NUMBER OVERNIGHT & 2- DAY DELIVERY TIME

33411 / 33411 STLOC To be negotiated with ordering agency

b. URGENT REQUIREMENTS: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering activity, ordering activities are encouraged, if time permits, to contact the Contractor for the purpose of obtaining accelerated delivery. The Contractor shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery time acceptable to the ordering activity, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

7. DISCOUNTS

Prices shown are NET Prices; Basic Discounts have been deducted.

a. Prompt Payment: 1% - 20 days from receipt of invoice or date of acceptance, whichever is later.

b. Quantity: SIN 33411 See Pricing, 811212 None

c. Dollar Volume: 1% discount for all single orders that exceed $100K

d. Government Educational Institutions: Offered the same discounts as all other Government customers

e. Other: None

8. TRADE AGREEMENTS ACT OF 1979, as amended

47QTCA21D00FA Page 5

All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.

9. STATEMENT CONCERNING AVAILABILITY OF EXPORT PACKING

Available as extra charge outside the scope of this contract.

10. SMALL REQUIREMENT The minimum dollar value of orders to be issued is $100.00.

11. MAXIMUM ORDER (All dollar amounts are exclusive of any discount for prompt payment.)

The Maximum Order value for the following Special Item Numbers (SINs) is $500,000:

Special Item Number 33411- Purchase of Equipment

Special Item Number 811212 – Maintenance of Equipment, Repair Service, and Repair Parts/Spare Parts

12. ORDERING PROCEEDURES FOR FEDERAL SUPPLY SCHEDULE CONTRACTS

Ordering activities shall use the ordering procedures of Federal Acquisition Regulation (FAR) 8.405 when placing an order or establishing a BPA for supplies or services. These procedures apply to all schedules.

a. FAR 8.405-1 Ordering procedures for supplies, and services not requiring a statement of work.

b. FAR 8.405-2 Ordering procedures for services requiring a statement of work.

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS REQUIREMENTS

Ordering activities acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index). Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering activities, shall be responded to promptly by the Contractor

13.1 FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS PUBS)

Information Technology products under this Schedule that do not conform to Federal Information Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication." Federal

Information Processing Standards Publications (FIPS PUBS) are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use. Individual orders for FIPS

PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS

Subscription Officer, both at the above address, or telephone number (703) 487-4650.

13.2 FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS)

Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD." Federal

Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Supply Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619-8925. Please include a self-addressed mailing label when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the U.S. Department of

Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301)975-2833

14. CONTRACTOR TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2001)

47QTCA21D00FA Page 6

(a) Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract. All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the Multiple Award Schedule.

(b) Travel: The Contractor may be required to travel in performance of orders issued under this contract. Allowable travel and per diem charges are governed by Pub .L. 99-234 and FAR Part 31, and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the Multiple Award Schedule. The Industrial Funding Fee does NOT apply to travel and per diem charges.

NOTE: Refer to FAR Part 31.205-46 Travel Costs, for allowable costs that pertain to official company business travel in regards to this contract.

(c) Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific FSC/service code classifications offered. All costs associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the

Multiple Award Schedule program.

(d) Insurance: As a commercial practice, the Contractor may be required to obtain/possess insurance coverage for specific

FSC/service code classifications offered. All costs associated with obtaining/possessing such insurance should be factored into the price offered under the Multiple Award Schedule program.

(e) Personnel: The Contractor may be required to provide key personnel, resumes or skill category descriptions in the performance of orders issued under this contract. Ordering activities may require agency approval of additions or replacements to key personnel.

(f) Organizational Conflicts of Interest: Where there may be an organizational conflict of interest as determined by the ordering agency, the Contractor’s participation in such order may be restricted in accordance with FAR Part 9.5.

(g) Documentation/Standards: The Contractor may be requested to provide products or services in accordance with rules, regulations, OMB orders, standards and documentation as specified by the agency’s order.

(h) Data/Deliverable Requirements: Any required data/deliverables at the ordering level will be as specified or negotiated in the agency’s order.

(i) Government-Furnished Property: As specified by the agency’s order, the Government may provide property, equipment, materials or resources as necessary.

(j) Availability of Funds: Many Government agencies’ operating funds are appropriated for a specific fiscal year. Funds may not be presently available for any orders placed under the contract or any option year. The Government’s obligation on orders placed under this contract is contingent upon the availability of appropriated funds from which payment for ordering purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are available to the ordering

Contracting Officer.

15. CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES

Any ordering activity, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR 52.212-4, paragraphs (l) Termination for the ordering activity’s convenience, and (m) Termination for Cause (See C.1.)

16. GSA ADVANTAGE!

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

(1) Manufacturer;

(2) Manufacturer's Part Number; and

(3) Product categories.

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.: NetScape). The

Internet address is http://www.fss.gsa.gov/.

47QTCA21D00FA Page 7

17. PURCHASE OF OPEN MARKET ITEMS

NOTE: Open Market Items are also known as incidental items, noncontract items, non-Schedule items, and items not on a

Federal Supply Schedule contract. ODCs (Other Direct Costs) are not part of this contract and should be treated as open market purchases. Ordering Activities procuring open market items must follow FAR 8.402(f).

For administrative convenience, an ordering activity contracting officer may add items not on the Federal Supply Multiple Award Schedule (MAS) -- referred to as open market items -- to a Federal Supply Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if-

(1) All applicable acquisition regulations pertaining to the purchase of the items not on the Federal Supply Schedule have been followed (e.g., publicizing (Part 5), competition requirements (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs (Part 19));

(2) The ordering activity contracting officer has determined the price for the items not on the Federal Supply Schedule is fair and reasonable;

(3) The items are clearly labeled on the order as items not on the Federal Supply Schedule; and

(4) All clauses applicable to items not on the Federal Supply Schedule are included in the order.

18. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

19. OVERSEAS ACTIVITIES

The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:

Not Applicable

Upon request of the Contractor, the ordering activity may provide the Contractor with logistics support, as available, in accordance with all applicable ordering activity regulations. Such ordering activity support will be provided on a reimbursable basis, and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

20. BLANKET PURCHASE AGREEMENTS (BPAs)

The use of BPAs under any schedule contract to fill repetitive needs for supplies or services is allowable. BPAs may be established with one or more schedule contractors. The number of BPAs to be established is within the discretion of the ordering activity establishing the BPA and should be based on a strategy that is expected to maximize the effectiveness of the BPA(s).

Ordering activities shall follow FAR 8.405-3 when creating and implementing BPA(s).

21. CONTRACTOR TEAM ARRANGEMENTS

47QTCA21D00FA Page 8

Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts.

This includes compliance with Clauses 552.238-74, Industrial Funding Fee and Sales Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

22. INSTALLATION, DEINSTALLATION, REINSTALLATION

The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the United States or the

District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-

Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds

$2,000, then the requirements of the Davis-Bacon Act applies.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 33411

23. SECTION 508 COMPLIANCE

If applicable, Section 508 compliance information on the supplies and services in this contract are available in Electronic and

Information Technology (EIT) at the following: Not Applicable

The EIT standard can be found at: www.Section508.gov/.

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES

Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order –

(a) A copy of the authorization from the ordering activity with whom the contractor has the prime contract (unless a copy was previously furnished to the Federal Supply Schedule contractor); and

(b)The following statement:

This order is placed under written authorization from _______ dated _______. In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern.

25. INSURANCE—WORK ON A GOVERNMENT INSTALLATION (JAN 1997)(FAR 52.228-5)

(a)The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

(b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective—

(1) For such period as the laws of the State in which this contract is to be performed prescribe; or

(2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the

Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors' proofs of required insurance, and shall make copies available to the Contracting Officer upon request.

http://www.section508.gov/

47QTCA21D00FA Page 9

26. SOFTWARE INTEROPERABILITY

Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interface may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.

27. ADVANCE PAYMENTS

A payment under this contract to provide a service or deliver an article for the United States Government may not be more than the value of the service already provided or the article already delivered. Advance or pre-payment is not authorized or allowed under this contract. (31 U.S.C. 3324)

TERMS AND CONDITIONS APPLICABLE TO PURCHASE OF

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY EQUIPMENT

(SPECIAL ITEM NUMBER 33411/ 33411 STLOC)

PROHIBITION OF REMAUNUFACTURED ITEMS WITH LIMITED EXCEPTIONS OF

CUSTOMER SPECIFIC REQUIREMENT

1. MATERIAL AND WORKMANSHIP

All equipment furnished hereunder must satisfactorily perform the function for which it is intended.

2. ORDER

Written orders, EDI orders (GSA Advantage! and FACNET), credit card orders, and orders placed under blanket purchase agreements (BPA) agreements shall be the basis for purchase in accordance with the provisions of this contract. If time of delivery extends beyond the expiration date of the contract, the Contractor will be obligated to meet the delivery and installation date specified in the original order.

For credit card orders and BPAs, telephone orders are permissible.

3. TRANSPORTATION OF EQUIPMENT

FOB DESTINATION. Prices cover equipment delivery to destination, for any location within the geographic scope of this contract (Continental United States – 48 States).

4. INSTALLATION AND TECHNICAL SERVICES

a.INSTALLATION. When the equipment provided under this contract is not normally self-installable, the Contractor's technical personnel shall be available to the ordering activity, at the ordering activity's location, to install the equipment and to train ordering activity personnel in the use and maintenance of the equipment. The charges, if any, for such services are listed below, or in the price schedule:

(1) Installation: Installation is not available from the Contractor under the scope of this contract. All equipment provided under this contract is considered normally to be self-installable.

(2) Operating and Maintenance Manuals: The Contractor shall furnish the Government one (1) copy of all operating and maintenance manuals relating to the equipment being delivered that is normally provided commercially at no charge.

b. INSTALLATION, DEINSTALLATION, REINSTALLATION. The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair

(including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no http://www.core.gov/

47QTCA21D00FA Page 10 laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act applies.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 33411/ 33411 STLOC.

c. OPERATING AND MAINTENANCE MANUALS. The Contractor shall furnish the ordering activity with one (1) copy of all operating and maintenance manuals which are normally provided with the equipment being purchased.

5. INSPECTION/ACCEPTANCE

The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The ordering activity reserves the right to inspect or test any equipment that has been tendered for acceptance. The ordering activity may require repair or replacement of nonconforming equipment at no increase in contract price. The ordering activity must exercise its postacceptance rights (1) within a reasonable time after the defect was discovered or should have been discovered; and (2) before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

6. WARRANTY

a.Unless specified otherwise in this contract, the Contractor’s standard commercial warranty as stated in the contract’s commercial pricelist will apply to this contract.

b.The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

c.Limitation of Liability. Except as otherwise provided by an express or implied warranty, the Contractor will not be liable to the ordering activity for consequential damages resulting from any defect or deficiencies in accepted items.

d.If inspection and repair of defective equipment under this warranty will be performed at the Contractor's plant, the address is as follows: Superior Solutions and Insights LLC, 8 Campus Drive Suite 105, Parsippany, NJ 07054 (203) 543-7167.

The Government should not return defective equipment to the Contract for adjustments and repairs or replacement without

Contractor’s prior consultation, instruction, and issuance of an RMA (Return Materials Authorization). To obtain an RMA form, please contact Contractor’s RMA Department at (203) 543-7167.

7. PURCHASE PRICE FOR ORDERED EQUIPMENT

The purchase price that the ordering activity will be charged will be the ordering activity purchase price in effect at the time of order placement, or the ordering activity purchase price in effect on the installation date (or delivery date when installation is not applicable), whichever is less.

8. RESPONSIBILITIES OF THE CONTRACTOR

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City or otherwise) covering work of this character, and shall include all costs, if any, of such compliance in the prices quoted in this offer.

9. TRADE-IN OF INFORMATION TECHNOLOGY EQUIPMENT

When an ordering activity determines that Information Technology equipment will be replaced, the ordering activity shall follow the contracting policies and procedures in the Federal Acquisition Regulation (FAR), the policies and procedures regarding disposition of information technology excess personal property in the Federal Property Management Regulations (FPMR) (41 CFR

101-43.6), and the policies and procedures on exchange/sale contained in the FPMR (41 CFR part 101-46).

47QTCA21D00FA Page 11

TERMS AND CONDITIONS APPLICABLE TO MAINTENANCE, REPAIR

SERVICE AND REPAIR PARTS/SPARE PARTS FOR GOVERNMENT-OWNED

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY

EQUIPMENT (AFTER EXPIRATION OF GUARANTEE/WARRANTY

PROVISIONS AND/OR WHEN REQUIRED SERVICE IS NOT COVERED

BY GUARANTEE/WARRANTY PROVISIONS) AND FOR LEASED EQUIPMENT

(SPECIAL ITEM NUMBER 811212 / 811212 STLOC)

ALL PARTS and HARDWARE MAINTENANCE/REPAIR MUST BE AUTHORIZED BY THE OEM

1. SERVICE AREAS

a. The maintenance and repair service rates listed herein are applicable to any Government location within the scope of the contract.

If any additional charge is to apply because of the greater distance from the Contractor's service locations, the mileage rate or other distance factor shall be stated in paragraphs 8.d and 9.d of this Special Item Number 811212/ 811212 STLOC.

b. When repair services cannot be performed at the ordering activity installation site, the repair services will be performed at the

Contractor's plant(s) listed below:

Superior Solutions and Insights LLC

8 Campus Drive Suite 105

Parsippany, NJ 07054

The third party maintenance is provided by our teaming partner:

JKS Systems

108 Sequin Drive

Glastonbury, CT 06033

Phone numbers: 1-860-295-9966

Contact: John Fritz

2. MAINTENANCE ORDER

a.Agencies may use written orders, EDI orders, credit card orders, or BPAs, for ordering maintenance under this contract. The

Contractor shall confirm orders within fifteen (15) calendar days from the date of receipt, except that confirmation of orders shall be considered automatic for renewals for maintenance (Special Item Number 811212 / 811212 STLOC). Automatic acceptance of order renewals for maintenance service shall apply for machines which may have been discontinued from use for temporary periods of time not longer than 120 calendar days. If the order is not confirmed by the Contractor as prescribed by this paragraph, the order shall be considered to be confirmed by the Contractor.

b.The Contractor shall honor orders for maintenance for the duration of the contract period or a lessor period of time, for the equipment shown in the pricelist. Maintenance service shall commence on a mutually agreed upon date, which will be written into the maintenance order. Maintenance orders shall not be made effective before the expiration of any applicable maintenance and parts guarantee/warranty period associated with the purchase of equipment. Orders for maintenance service shall not extend beyond the end of the contract period.

c.Maintenance may be discontinued by the ordering activity on thirty (30) calendar days written notice, or shorter notice when agreed to by the Contractor; such notice to become effective thirty (30) calendar days from the date on the notification. However, the ordering activity may extend the original discontinuance date upon written notice to the Contractor, provided that such notice is furnished at least ten (10) calendar days prior to the original discontinuance date.

d. Annual Funding. When annually appropriated funds are cited on a maintenance order, the period of maintenance shall automatically expire on September 30th of the contract period, or at the end of the contract period, whichever occurs first. Renewal of a maintenance order citing the new appropriation shall be required, if maintenance is to continue during any remainder of the contract period.

e. Cross-year Funding Within Contract Period. Where an ordering activity's specific appropriation authority provides for funds in excess of a 12 month, fiscal year period, the ordering activity may place an order under this schedule contract for a period up to the expiration of the contract period, notwithstanding the intervening fiscal years.

47QTCA21D00FA Page 12

f. Ordering activities should notify the Contractor in writing thirty (30) calendar days prior to the expiration of maintenance service, if maintenance is to be terminated at that time. Orders for continued maintenance will be required if maintenance is to be continued during the subsequent period.

3. REPAIR SERVICE AND REPAIR PARTS/SPARE PARTS ORDERS

a. Agencies may use written orders, EDI orders, credit card orders, blanket purchase agreements (BPAs), or small order procedures for ordering repair service and/or repair parts/spare parts under this contract. Orders for repair service shall not extend beyond the end of the contract period.

b. When repair service is ordered, only one chargeable repairman shall be dispatched to perform repair service, unless the ordering activity agrees, in advance, that additional repair personnel are required to effect repairs.

4. LOSS OR DAMAGE

When the Contractor removes equipment to his establishment for repairs, the Contractor shall be responsible for any damage or loss, from the time the equipment is removed from the ordering activity installation, until the equipment is returned to such installation.

5. SCOPE

a. The Contractor shall provide maintenance for all equipment listed herein, as requested by the ordering activity during the contract term. Repair service and repair parts/spare parts shall apply exclusively to the equipment types/models within the scope of this Information Technology Schedule.

b. Equipment placed under maintenance service shall be in good operating condition.

(1) In order to determine that the equipment is in good operating condition, the equipment shall be subject to inspection by the

Contractor, without charge to the ordering activity.

(2) Costs of any repairs performed for the purpose of placing the equipment in good operating condition shall be borne by the

Contractor, if the equipment was under the Contractor's guarantee/warranty or maintenance responsibility prior to the effective date of the maintenance order.

(3) If the equipment was not under the Contractor's responsibility, the costs necessary to place the equipment in proper operating condition are to be borne by the ordering activity, in accordance with the provisions of Special Item Number 811212 / 811212

STLOC (or outside the scope of this contract).

6. RESPONSIBILITIES OF THE ORDERING ACTIVITY

a. Ordering activity personnel shall not perform maintenance or attempt repairs to equipment while such equipment is under the purview of a maintenance order, unless agreed to by the Contractor.

b. Subject to security regulations, the ordering activity shall permit access to the equipment which is to be maintained or repaired.

7. RESPONSIBILITIES OF THE CONTRACTOR

For equipment not covered by a maintenance contract or warranty, the Contractor's repair service personnel shall complete repairs as soon as possible after notification by the ordering activity that service is required. Within the service areas, this repair service should normally be done within 4 hours after notification.

8. MAINTENANCE RATE PROVISIONS

a. The Contractor shall bear all costs of maintenance, including labor, parts, and such other expenses as are necessary to keep the equipment in good operating condition, provided that the required repairs are not occasioned by fault or negligence of the ordering activity.

47QTCA21D00FA Page 13

b. REGULAR HOURS

The basic monthly rate for each make and model of equipment shall entitle the ordering activity to maintenance service during a mutually agreed upon nine (9) hour principal period of maintenance, Monday through Friday, exclusive of holidays observed at the ordering activity location.

c. AFTER HOURS

Should the ordering activity require that maintenance be performed outside of Regular Hours, charges for such maintenance, if any, will be specified in the pricelist. Periods of less than one hour will be prorated to the nearest quarter hour.

d. TRAVEL AND TRANSPORTATION

If any charge is to apply, over and above the regular maintenance rates, because of the distance between the ordering activity location and the Contractor's service area, the charge will be:

Not Applicable

e. QUANTITY DISCOUNTS

Quantity discounts from listed maintenance service rates for multiple equipment owned and/or leased by a ordering activity are indicated below:

Quantity Range Discounts

None Units ________% _______ Units ________%

_______ Units ________%

9. REPAIR SERVICE RATE PROVISIONS

a. CHARGES. Charges for repair service will include the labor charge, computed at the rates set forth below, for the time during which repairmen are actually engaged in work, and, when applicable, the charge for travel or transportation.

b. MULTIPLE MACHINES. When repairs are ordered by a ordering activity on two or more machines located in one or more buildings within walking distance of each other, the charges will be computed from the time the repairman commences work on the first machine, until the work is completed on the last machine. The time required to go from one machine to another, or from one building to another, will be considered actual work performance, and chargeable to the ordering activity, provided the time consumed in going between machines (or buildings) is reasonable.

c. TRAVEL OR TRANSPORTATION

(1) AT THE CONTRACTOR'S SHOP

(a) When equipment is returned to the Contractor's shop for adjustments or repairs which are not covered by the guarantee/warranty provision, the cost of transportation, packing, etc., from the ordering activity location to the Contractor's plant, and return to the ordering activity location, shall be borne by the ordering activity.

(b) The ordering activity should not return defective equipment to the Contractor for adjustments and repairs or replacement without his prior consultation and instruction.

(2) AT THE ORDERING ACTIVITY LOCATION (Within Established Service Areas)

When equipment is repaired at the ordering activity location, and repair service rates are established for service areas or zones, the listed rates are applicable to any ordering activity location within such service areas or zones. No extra charge, time, or expense will be allowed for travel or transportation of repairmen or machines to or from the ordering activity office; such overhead is included in the repair service rates listed.

(3) AT THE ORDERING ACTIVITY LOCATION (Outside Established Service Areas)

(a) The repair service rates listed for subparagraph (2) above apply, except that a travel charge of N/A per mile for repairmen will apply to the round-trip distance between the geographic limits of the applicable service area and the ordering activity location.

Such charge will apply as an additional charge, but it will be limited to one round trip for each request that is made by the ordering activity for repair service, regardless of whether repairs are performed at the ordering activity location or at the Contractor's shop.

47QTCA21D00FA Page 14

(b) When the overall travel charge computed at the above mileage rate is unreasonable (considering the time required for travel, actual and necessary transportation costs, and the allowable ordering activity per diem rate for each night the repairman is required to remain overnight at the ordering activity location), the ordering activity shall have the option of reimbursing the Contractor for actual costs, provided that the actual costs are reasonable and allowable. The Contractor shall furnish the ordering activity with a report of travel performed and related expenses incurred. The report shall include departure and arrival dates, times, and the applicable mode of travel.

d. LABOR RATES

(1) REGULAR HOURS

The Regular Hours repair service rates listed herein shall entitle the ordering activity to repair service during the period 8:00 a.m.

to 5:00 p.m., Monday through Friday, exclusive of holidays observed at the ordering activity location. There shall be no additional charge for repair service which was requested during Regular Hours, but performed outside the Regular Hours defined above, at the convenience of the Contractor.

(2) AFTER HOURS

When the ordering activity requires that repair service be performed outside the Regular Hours defined above, except Sundays and

Holidays observed at the ordering activity location, the After Hours repair service rates listed herein shall apply. The Regular

Hours rates defined above shall apply when repair service is requested during Regular Hours, but performed After Hours at the convenience of the Contractor.

(3) SUNDAYS AND HOLIDAYS

When the ordering activity requires that repair service be performed on Sundays and Holidays observed at the ordering activity location, the Sundays and Holidays repair service rates listed herein shall apply. When repair service is requested to be performed during Regular Hours and/or After Hours, but is performed at the convenience of the Contractor on Sundays or Holidays observed at the ordering activity location, the Regular Hours and/or After Hours repair service rates, as applicable, shall apply.

REPAIR SERVICE RATES

LOCATION

MINIMUM

CHARGE

REGULAR

HOURS

PER HOUR**

AFTER

HOURS PER

HOUR**

SUNDAY’S AND

HOLIDAYS

PER HOUR

CONTRACTOR’S SHOP $99.00 $99.00 Not Available Not Available

ORDERING ACTIVITY LOCATION

(WITHIN ESTABLISHED SERVICE

AREAS) Not Available Not Available Not Available Not Available

ORDERING ACTIVITY LOCATION

(OUTSIDE ESTABLISHED SERVICE

AREAS) Not Available Not Available Not Available Not Available

*MINIMUM CHARGES INCLUDE 1 FULL HOURS ON THE JOB.

**FRACTIONAL HOURS, AT THE END OF THE JOB, WILL BE PRORATED TO THE NEAREST QUARTER HOUR.

10. REPAIR PARTS/SPARE PARTS RATE PROVISIONS

All parts, furnished as spares or as repair parts in connection with the repair of equipment, unless otherwise indicated in this pricelist, shall be new, standard parts manufactured by the equipment manufacturer. All parts shall be furnished at prices indicated in the Contractor's commercial pricelist dated N/A, at a discount of N/A% from such listed prices.

11. GUARANTEE/WARRANTY—REPAIR SERVICE AND REPAIR PARTS/SPARE PARTS

a. REPAIR SERVICE

All repair work will be guaranteed/warranted for a period of N/A

b. REPAIR PARTS/SPARE PARTS

All parts, furnished either as spares or repairs parts will be guaranteed/warranted for a period N/A

47QTCA21D00FA Page 15

12. INVOICES AND PAYMENTS

a. Maintenance Service

(1) Invoices for maintenance service shall be submitted by the Contractor on a quarterly or monthly basis, after the completion of such period. Maintenance charges must be paid in arrears (31 U.S.C. 3324). PROMPT PAYMENT DISCOUNT, IF

APPLICABLE, SHALL BE SHOWN ON THE INVOICE.

(2) Payment for maintenance service of less than one month's duration shall be prorated at 1/30th of the monthly rate for each calendar day.

b. Repair Service and Repair Parts/Spare Parts

Invoices for repair service and parts shall be submitted by the Contractor as soon as possible after completion of work. Payment under blanket purchase agreements will be made quarterly or monthly, except where cash payment procedures are used. Invoices shall be submitted separately to each ordering activity office ordering services under the contract. The cost of repair parts shall be shown as a separate item on the invoice, and shall be priced in accordance with paragraph #10, above. PROMPT PAYMENT

DISCOUNT, IF APPLICABLE, SHALL BE SHOWN ON THE INVOICE.

USA COMMITMENT TO PROMOTE

SMALL BUSINESS PARTICIPATION

PROCUREMENT PROGRAMS

PREAMBLE

Superior Solutions and Insights LLC provides commercial products and services to ordering activities. We are committed to promoting participation of small, small disadvantaged and women-owned small businesses in our contracts. We pledge to provide opportunities to the small business community through reselling opportunities, mentor-protégé programs, joint ventures, teaming arrangements, and subcontracting.

COMMITMENT

To actively seek and partner with small businesses.

To identify, qualify, mentor and develop small, small disadvantaged and women-owned small businesses by purchasing from these businesses whenever practical.

To develop and promote company policy initiatives that demonstrate our support for awarding contracts and subcontracts to small business concerns.

To undertake significant efforts to determine the potential of small, small disadvantaged and women-owned small business to supply products and services to our company.

To insure procurement opportunities are designed to permit the maximum possible participation of small, small disadvantaged, and women-owned small businesses.

To attend business opportunity workshops, minority business enterprise seminars, trade fairs, procurement conferences, etc., to identify and increase small businesses with whom to partner.

To publicize in our marketing publications our interest in meeting small businesses that may be interested in subcontracting opportunities.

We signify our commitment to work in partnership with small, small disadvantaged and women-owned small businesses to promote and increase their participation in ordering activity contracts. To accelerate potential opportunities please contact

Don Shownkeen, President

E-mail: dshownkeen@ssai-group.com

47QTCA21D00FA Page 16

BEST VALUE

BLANKET PURCHASE AGREEMENT

FEDERAL SUPPLY SCHEDULE

(Insert Customer Name)

In the spirit of the Federal Acquisition Streamlining Act (ordering activity) and Superior Solutions and Insights LLC . enter into a cooperative agreement to further reduce the administrative costs of acquiring commercial items from the General Services

Administration (GSA) Federal Supply Schedule Contract(s) 47QTCA21D00FA.

Federal Supply Schedule contract BPAs eliminate contracting and open market costs such as: search for sources; the development of technical documents, solicitations and the evaluation of offers.