MAS - Serco Inc. - 47QTCA18D007H

Version 2

GENERAL SERVICES ADMINISTRATION

Federal Supply Schedule Price List Authorized Federal Supply Schedule Price List

On-line access to contract ordering information, terms and conditions, up-to- date pricing, and the option to create an electronic delivery order are available through GSA Advantage!, a menu-driven database system. The INTERNET address for GSA Advantage! is: GSAAdvantage.gov

Decisive Analytics Corporation is a wholly owned subsidiary of Whitney, Bradley, & Brown, Inc.

GSA Multiple Award Schedule (MAS) Federal Supply Group: Professional Services

Contract No. 47QTCA18D007H

For more information on ordering from Federal Supply Schedules click on the FSS Schedules button at http://www.gsa.gov/schedules-ordering

Contract Period: February 21, 2018 through February 20, 2023

Pricelist current through Modification #PS-A824 dated August 18, 2020 Prices Shown Herein are Net (discount deducted)

1400 Crystal Drive, Suite 1400 Arlington, VA 22202

Telephone: 703-414-5016; Fax: 703-414-5099 Website: www.wbbinc.com

Email: dana.ho@dac.us Contract Administrator: Dana Ho

Business Size: Large Business

Version 2

Customer Information 1a. Special Item Numbers (SINs) Awarded:

SIN Name 54151S Information Technology Professional Services 811212 Maintenance of Equipment, Repair Services and/Repair/Spare Parts 54151 Software Maintenance Services

1b. Lowest Priced Item: SIN 54151S Cyber Operator - $54.02 (customer site)

1c. Labor Categories: Located on Pg. 19

2. Maximum Order: $500,000

3. Minimum Order: 40 hours

4. Geographic Coverage: Domestic and Overseas Delivery

5. Points of Production: Arlington, Arlington County, VA Reston, Fairfax County, VA Colorado Springs, El Paso County, CO Huntsville, Madison County, AL San Diego, CA

6. Discount from list, prices or statement of net price: Not Applicable

7. Quantity Discounts: Not Applicable

8. Prompt Payment Terms: Net 30 Days

9. Foreign Items: Not Applicable 10a. Time of delivery: As agreed upon with customer 10b. Expedited Delivery: Not Applicable 10c. Overnight and 2-day delivery: Not Applicable 10d. Urgent Requirements: Not Applicable

11. F.O.B. Point: Destination 12a. Ordering Address: DECISIVE ANALYTICS Corporation Attention: Dana Ho 1400 Crystal Drive, Suite 1400 Arlington, Virginia 22202 Voice: 703-414-5016 Fax: 703-414-5099 Email: dana.ho@dac.us 12b. Ordering procedures: For supplies and services, the ordering procedures, information on Blanket Purchase Agreements (BPAs) can be found in FAR 8.405-3.

13. Payment Address: DECISIVE ANALYTICS Corporation Attention: Accounts Receivable 1400 Crystal Drive, Suite 1400 Arlington, Virginia 22202

14. Warranty Provisions: Attached

15. Export Packing Charges: Not Applicable

16. Terms of rental, maintenance, and repair Attached

17. Terms of installation Attached 18a. Terms of repair parts Attached 18b. Terms and conditions for any other services Attached

Price List

Solutions for Success www.dac.us 703/ 414-5001 (Main Number) 703/ 414-5016 (Contracts)

19. List of Service and distribution points Attached

20. List of participating dealers Not Applicable

21. Preventive maintenance Not Applicable 22a. Special attributes such as environmental attributes (e.g., recycled content, energy efficiency, and/or reduced pollutants).: None 22b. Section 508 compliance information: Not Applicable

24. Data Universal Number System (DUNS) number: 036593457

26. Notification regarding registration in System for Award Management (SAM) database: No change

Solutions for Success www.dac.us 703/ 414-5001 (Main Number) 703/ 414-5016 (Contracts)

TERMS AND CONDITIONS APPLICABLE TO TERM SOFTWARE LICENSES (SPECIAL ITEM NUMBER

54151) OF GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY SOFTWARE

1. INSPECTION/ACCEPTANCE

The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The ordering activity reserves the right to inspect or test any software that has been tendered for acceptance. The ordering activity may require repair or replacement of nonconforming software at no increase in contract price. The ordering activity must exercise its post-acceptance rights (1) a reasonable time after the defect was discovered or should have been discovered; and (2) before any substantial change occurs in the condition of the software, unless the change is due to the defect in the software.

2. END USER LICENSE AGREEMENTS (EULA) / TERMS OF SERVICE (TOS) AGREEMENT

REQUIREMENTS

The Contractor shall provide all Enterprise User License Agreements in an editable format.

3. GUARANTEE/WARRANTY

a. Unless specified otherwise in this contract, the Contractor’s standard commercial guarantee/warranty as stated in the contract’s commercial pricelist will apply to this contract.

Please refer to DAC’s Standard Commercial Warranty.

b. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

c. Limitation of Liability. Except as otherwise provided by an express or implied warranty, the Contractor will not be liable to the ordering activity for consequential damages resulting from any defect or deficiencies in accepted items.

4. TECHNICAL SERVICES

The Contractor, without additional charge to the ordering activity, shall provide a hot line technical support number (812) 645-4343 for the purpose of providing user assistance and guidance in the implementation of the software. The technical support number is available from 9:00 am to 5:00 pm EST.

5. SOFTWARE MAINTENANCE

a. Software maintenance as it is defined:

____X___ 1. Software Maintenance as a Service (SIN 54151)

Software maintenance as a service creates, designs, implements, and/or integrates customized changes to software that solve one or more problems and is not included with the price of the software. Software maintenance as a service includes person-to-person communications regardless of the medium used to communicate: telephone support, on-line technical support, customized support, and/or technical expertise which are charged

Solutions for Success www.dac.us 703/ 414-5001 (Main Number) 703/ 414-5016 (Contracts) commercially. Software maintenance as a service is billed arrears in accordance with 31 U.S.C. 3324.

b. Invoices for maintenance service shall be submitted by the Contractor on a quarterly or monthly basis, after the completion of such period. Maintenance charges must be paid in arrears (31 U.S.C. 3324). PROMPT PAYMENT DISCOUNT, IF APPLICABLE, SHALL BE SHOWN ON

THE INVOICE.

6. PERIODS OF TERM LICENSES AND MAINTENANCE (SIN 54151)

a. The Contractor shall honor orders for periods for the duration of the contract period or a lesser period of time.

b. Term licenses and/or maintenance may be discontinued by the ordering activity on thirty (30) calendar days written notice to the Contractor.

c. Annual Funding. When annually appropriated funds are cited on an order for term licenses and/or maintenance, the period of the term licenses and/or maintenance shall automatically expire on September 30 of the contract period, or at the end of the contract period, whichever occurs first. Renewal of the term licenses and/or maintenance orders citing the new appropriation shall be required, if the term licenses and/or maintenance is to be continued during any remainder of the contract period.

d. Cross-Year Funding Within Contract Period. Where an ordering activity’s specific appropriation authority provides for funds in excess of a 12 month (fiscal year) period, the ordering activity may place an order under this schedule contract for a period up to the expiration of the contract period, notwithstanding the intervening fiscal years.

e. Ordering activities should notify the Contractor in writing thirty (30) calendar days prior to the expiration of an order, if the term licenses and/or maintenance is to be terminated at that time. Orders for the continuation of term licenses and/or maintenance will be required if the term licenses and/or maintenance is to be continued during the subsequent period.

7. CONVERSION FROM TERM LICENSE TO PERPETUAL LICENSE

a. The ordering activity may convert term licenses to perpetual licenses for any or all software at any time following acceptance of software. At the request of the ordering activity the Contractor shall furnish, within ten (l0) calendar days, for each software product that is contemplated for conversion, the total amount of conversion credits which have accrued while the software was on a term license and the date of the last update or enhancement.

b. Conversion credits which are provided shall, within the limits specified, continue to accrue from one contract period to the next, provided the software remains on a term license within the ordering activity.

c. The term license for each software product shall be discontinued on the day immediately preceding the effective date of conversion from a term license to a perpetual license.

Solutions for Success www.dac.us 703/ 414-5001 (Main Number) 703/ 414-5016 (Contracts)

d. The price the ordering activity shall pay will be the perpetual license price that prevailed at the time such software was initially ordered under a term license, or the perpetual license price prevailing at the time of conversion from a term license to a perpetual license, whichever is the less, minus an amount equal to __________% of all term license payments during the period that the software was under a term license within the ordering activity.

8. TERM LICENSE CESSATION

a. After a software product has been on a continuous term license for a period of ___________ * months, a fully paid-up, non-exclusive, perpetual license for the software product shall automatically accrue to the ordering activity. The period of continuous term license for automatic accrual of a fully paid-up perpetual license does not have to be achieved during a particular fiscal year; it is a written Contractor commitment which continues to be available for software that is initially ordered under this contract, until a fully paid-up perpetual license accrues to the ordering activity. However, should the term license of the software be discontinued before the specified period of the continuous term license has been satisfied, the perpetual license accrual shall be forfeited.

b. The Contractor agrees to provide updates and maintenance service for the software after a perpetual license has accrued, at the prices and terms of Special Item Number l32-34, if the licensee elects to order such services. Title to the software shall remain with the Contractor.

9. UTILIZATION LIMITATIONS - (SIN 54151)

a. Software acquisition is limited to commercial computer software defined in FAR Part 2.101.

b. When acquired by the ordering activity, commercial computer software and related documentation so legend shall be subject to the following:

(1) Title to and ownership of the software and documentation shall remain with the Contractor, unless otherwise specified.

(2) Software licenses are by site and by ordering activity. An ordering activity is defined as a cabinet level or independent ordering activity. The software may be used by any subdivision of the ordering activity (service, bureau, division, command, etc.)

that has access to the site the software is placed at, even if the subdivision did not participate in the acquisition of the software. Further, the software may be used on a sharing basis where multiple agencies have joint projects that can be satisfied by the use of the software placed at one ordering activity's site. This would allow other agencies access to one ordering activity's database. For ordering activity public domain databases, user agencies and third parties may use the computer program to enter, retrieve, analyze and present data. The user ordering activity will take appropriate action by instruction, agreement, or otherwise, to protect the Contractor's proprietary property with any third parties that are permitted access to the computer programs and documentation in connection with the user ordering activity's permitted use of the computer programs and documentation. For purposes of this section, all such permitted third parties shall be deemed agents of the user ordering activity.

Solutions for Success www.dac.us 703/ 414-5001 (Main Number) 703/ 414-5016 (Contracts)

(3) Except as is provided in paragraph 8.b(2) above, the ordering activity shall not provide or otherwise make available the software or documentation, or any portion thereof, in any form, to any third party without the prior written approval of the Contractor. Third parties do not include prime Contractors, subcontractors and agents of the ordering activity who have the ordering activity's permission to use the licensed software and documentation at the facility, and who have agreed to use the licensed software and documentation only in accordance with these restrictions. This provision does not limit the right of the ordering activity to use software, documentation, or information therein, which the ordering activity may already have or obtains without restrictions.

(4) The ordering activity shall have the right to use the computer software and documentation with the computer for which it is acquired at any other facility to which that computer may be transferred, or in cases of Disaster Recovery, the ordering activity has the right to transfer the software to another site if the ordering activity site for which it is acquired is deemed to be unsafe for ordering activity personnel; to use the computer software and documentation with a backup computer when the primary computer is inoperative; to copy computer programs for safekeeping (archives) or backup purposes; to transfer a copy of the software to another site for purposes of benchmarking new hardware and/or software; and to modify the software and documentation or combine it with other software, provided that the unmodified portions shall remain subject to these restrictions.

(5) "Commercial Computer Software" may be marked with the Contractor's standard commercial restricted rights legend, but the schedule contract and schedule pricelist, including this clause, "Utilization Limitations" are the only governing terms and conditions, and shall take precedence and supersede any different or additional terms and conditions included in the standard commercial legend.

10. SOFTWARE CONVERSIONS - (SIN 54151)

Full monetary credit will be allowed to the ordering activity when conversion from one version of the software to another is made as the result of a change in operating system , or from one computer system to another. Under a term license, conversion credits which accrued while the earlier version was under a term license shall carry forward and remain available as conversion credits which may be applied towards the perpetual license price of the new version.

11. DESCRIPTIONS AND EQUIPMENT COMPATIBILITY

The Contractor shall include, in the schedule pricelist, a complete description of each software product and a list of equipment on which the software can be used. Also, included shall be a brief, introductory explanation of the modules and documentation which are offered.

12. RIGHT-TO-COPY PRICING

The Contractor shall insert the discounted pricing for right-to-copy licenses.

Solutions for Success www.dac.us 703/ 414-5001 (Main Number) 703/ 414-5016 (Contracts)

TERMS AND CONDITIONS APPLICABLE TO MAINTENANCE, REPAIR

SERVICE AND REPAIR PARTS/SPARE PARTS FOR GOVERNMENT-OWNED

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY

EQUIPMENT, RADIO/TELEPHONE EQUIPMENT, (AFTER EXPIRATION OF

GUARANTEE/WARRANTY PROVISIONS AND/OR WHEN REQUIRED SERVICE IS NOT COVERED

BY GUARANTEE/WARRANTY PROVISIONS) AND FOR LEASED EQUIPMENT (SPECIAL ITEM

NUMBER 811212)

1. SERVICE AREAS

a. The maintenance and repair service rates listed herein are applicable to any ordering activity location within 0 miles of the Contractor’s service location. If any additional charge is to apply because of the greater distance from the Contractor's service locations, the mileage rate or other distance factor shall be negotiated at the Task Order level.

b. When repair services cannot be performed at the ordering activity installation site, the repair services will be performed at the Contractor's plant(s) listed below:

1400 Crystal Drive, Suite 1400, Arlington, VA 22202

2. MAINTENANCE ORDER

a. Agencies may use written orders, EDI orders, credit card orders, or BPAs, for ordering maintenance under this contract. The Contractor shall confirm orders within fifteen (15) calendar days from the date of receipt, except that confirmation of orders shall be considered automatic for renewals for maintenance (Special Item Number 811212). Automatic acceptance of order renewals for maintenance service shall apply for machines which may have been discontinued from use for temporary periods of time not longer than 120 calendar days. If the order is not confirmed by the Contractor as prescribed by this paragraph, the order shall be considered to be confirmed by the Contractor.

b. The Contractor shall honor orders for maintenance for the duration of the contract period or a lessor period of time, for the equipment shown in the pricelist. Maintenance service shall commence on a mutually agreed upon date, which will be written into the maintenance order. Maintenance orders shall not be made effective before the expiration of any applicable maintenance and parts guarantee/warranty period associated with the purchase of equipment.

Orders for maintenance service shall not extend beyond the end of the contract period.

c. Maintenance may be discontinued by the ordering activity on thirty (30) calendar days written notice, or shorter notice when agreed to by the Contractor; such notice to become effective thirty (30) calendar days from the date on the notification. However, the ordering activity may extend the original discontinuance date upon written notice to the Contractor, provided that such notice is furnished at least ten (10) calendar days prior to the original discontinuance date.

d. Annual Funding. When annually appropriated funds are cited on a maintenance order, the period of maintenance shall automatically expire on September 30th of the contract period, or at the end of the contract period, whichever occurs first. Renewal of a maintenance order

Solutions for Success www.dac.us 703/ 414-5001 (Main Number) 703/ 414-5016 (Contracts) citing the new appropriation shall be required, if maintenance is to continue during any remainder of the contract period.

e. Cross-year Funding Within Contract Period. Where an ordering activity's specific appropriation authority provides for funds in excess of a 12 month, fiscal year period, the ordering activity may place an order under this schedule contract for a period up to the expiration of the contract period, notwithstanding the intervening fiscal years.

f. Ordering activities shall notify the Contractor in writing thirty (30) calendar days prior to the expiration of maintenance service, if maintenance is to be terminated at that time. Orders for continued maintenance will be required if maintenance is to be continued during the subsequent period.

3. REPAIR SERVICE AND REPAIR PARTS/SPARE PARTS ORDERS

a. Agencies may use written orders, EDI orders, credit card orders, blanket purchase agreements (BPAs), or small order procedures for ordering repair service and/or repair parts/spare parts under this contract. Orders for repair service shall not extend beyond the end of the contract period.

b. When repair service is ordered, only one chargeable repairman shall be dispatched to perform repair service, unless the ordering activity agrees, in advance, that additional repair personnel are required to effect repairs.

4. LOSS OR DAMAGE

When the Contractor removes equipment to his establishment for repairs, the Contractor shall be responsible for any damage or loss, from the time the equipment is removed from the ordering activity installation, until the equipment is returned to such installation.

5. SCOPE

a. The Contractor shall provide maintenance for all equipment listed herein, as requested by the ordering activity during the contract term. Repair service and repair parts/spare parts shall apply exclusively to the equipment types/models within the scope of this Information Technology Schedule.

b. Equipment placed under maintenance service shall be in good operating condition.

(1) In order to determine that the equipment is in good operating condition, the equipment shall be subject to inspection by the Contractor, without charge to the ordering activity.

(2) Costs of any repairs performed for the purpose of placing the equipment in good operating condition shall be borne by the Contractor, if the equipment was under the Contractor's guarantee/warranty or maintenance responsibility prior to the effective date of the maintenance order.

(3) If the equipment was not under the Contractor's responsibility, the costs necessary to place the equipment in proper operating condition are to be borne by the ordering activity, in accordance with the provisions of Special Item Number 132-12 (or outside the scope of this contract).

Solutions for Success www.dac.us 703/ 414-5001 (Main Number) 703/ 414-5016 (Contracts)

6. RESPONSIBILITIES OF THE ORDERING ACTIVITY

a. Ordering activity personnel shall not perform maintenance or attempt repairs to equipment while such equipment is under the purview of a maintenance order, unless agreed to by the Contractor.

b. Subject to security regulations, the ordering activity shall permit access to the equipment which is to be maintained or repaired.

c. If the Ordering Activity desires a factory authorized/certified service personnel then this should be clearly stated in the task or delivery order.

7. RESPONSIBILITIES OF THE CONTRACTOR

a. For equipment not covered by a maintenance contract or warranty, the Contractor's repair service personnel shall complete repairs as soon as possible after notification by the ordering activity that service is required. Within the service areas, this repair service should normally be done within 24 hours after notification. The cost of this repair shall be billed on a Time and Materials basis. Travel and ODCs shall be billed in accordance with the Federal Travel Regulation and DAC’s standard business practices.

b. If the Ordering Activity task or delivery order specifies a factory authorized/certified service personnel then the Contractor is obligated to provide such a factory authorized/certified service personnel for the equipment to be repaired or serviced, unless otherwise agreed to in advance between the Agency and the Contractor.

8. MAINTENANCE RATE PROVISIONS

a. The Contractor shall bear all costs of maintenance, including labor, parts, and such other expenses as are necessary to keep the equipment in good operating condition, provided that the required repairs are not occasioned by fault or negligence of the ordering activity, and that such repairs are in accordance with DAC’s Commercial Warranty.

b. REGULAR HOURS

The basic monthly rate for each make and model of equipment shall entitle the ordering activity to maintenance service during a mutually agreed upon nine (9) hour principal period of maintenance, Monday through Friday, exclusive of holidays observed at the ordering activity location.

c. AFTER HOURS

Should the ordering activity require that maintenance be performed outside of Regular Hours, charges for such maintenance, if any, will be specified in the pricelist. Periods of less than one hour will be prorated to the nearest quarter hour.

d. TRAVEL AND TRANSPORTATION

If any charge is to apply, over and above the regular maintenance rates, because of the distance between the ordering activity location and the Contractor's service area, the charge will be negotiated at the Task Order level.

e. QUANTITY DISCOUNTS

Solutions for Success www.dac.us 703/ 414-5001 (Main Number) 703/ 414-5016 (Contracts)

None.

9. REPAIR SERVICE RATE PROVISIONS

a. CHARGES. Charges for repair service will include the labor charge, computed at the rates set forth below, for the time during which repairmen are actually engaged in work, and, when applicable, the charge for travel or transportation.

b. MULTIPLE MACHINES. When repairs are ordered by a ordering activity on two or more machines located in one or more buildings within walking distance of each other, the charges will be computed from the time the repairman commences work on the first machine, until the work is completed on the last machine. The time required to go from one machine to another, or from one building to another, will be considered actual work performance, and chargeable to the ordering activity, provided the time consumed in going between machines (or buildings) is reasonable.

c. TRAVEL OR TRANSPORTATION

(1) AT THE CONTRACTOR'S SHOP

(a) When equipment is returned to the Contractor's shop for adjustments or repairs which are not covered by the guarantee/warranty provision, the cost of transportation, packing, etc., from the ordering activity location to the Contractor's plant, and return to the ordering activity location, shall be borne by the ordering activity.

(b) The ordering activity should not return defective equipment to the Contractor for adjustments and repairs or replacement without his prior consultation and instruction.

(2) AT THE ORDERING ACTIVITY LOCATION (Within Established Service Areas)

When equipment is repaired at the ordering activity location, and repair service rates are established for service areas or zones, the listed rates are applicable to any ordering activity location within such service areas or zones. No extra charge, time, or expense will be allowed for travel or transportation of repairmen or machines to or from the ordering activity office; such overhead is included in the repair service rates listed.

(3) AT THE ORDERING ACTIVITY LOCATION (Outside Established Service Areas)

(a) If repairs are to be made at the ordering activity location, and the location is outside the service area as shown in paragraph 1.a, the repair service and mileage rates negotiated per subparagraphs 1.a and 8.d will apply.

(b) When the overall travel charge computed at the above mileage rate is unreasonable (considering the time required for travel, actual and necessary transportation costs, and the allowable ordering activity per diem rate for each night the repairman is required to remain overnight at the ordering activity location), the ordering activity shall have the option of reimbursing the Contractor for actual costs, provided that the actual costs are reasonable and allowable. The Contractor shall furnish the ordering activity with a report of

Solutions for Success www.dac.us 703/ 414-5001 (Main Number) 703/ 414-5016 (Contracts) travel performed and related expenses incurred. The report shall include departure and arrival dates, times, and the applicable mode of travel.

d. LABOR RATES

(1) REGULAR HOURS

The Regular Hours repair service rates listed herein shall entitle the ordering activity to repair service during the period 8:00 a.m. to 5:00 p.m. Eastern Standard Time, Monday through Friday, exclusive of holidays observed at the ordering activity location. There shall be no additional charge for repair service which was requested during Regular Hours, but performed outside the Regular Hours defined above, at the convenience of the Contractor.

(2) AFTER HOURS

When the ordering activity requires that repair service be performed outside the Regular Hours defined above, except Sundays and Holidays observed at the ordering activity location, the After Hours repair service rates listed herein shall apply. The Regular Hours rates defined above shall apply when repair service is requested during Regular Hours, but performed After Hours at the convenience of the Contractor.

(3) SUNDAYS AND HOLIDAYS

When the ordering activity requires that repair service be performed on Sundays and Holidays observed at the ordering activity location, the Sundays and Holidays repair service rates listed herein shall apply. When repair service is requested to be performed during Regular Hours and/or After Hours, but is performed at the convenience of the Contractor on Sundays or Holidays observed at the ordering activity location, the Regular Hours and/or After Hours repair service rates, as applicable, shall apply.

*MINIMUM CHARGES INCLUDE _1_ FULL HOURS ON THE JOB.

REPAIR SERVICE RATES

REGULAR AFTER SUNDAYS AND

MINIMUM HOURS HOURS HOLIDAYS

LOCATION CHARGE* PER HOUR** PER HOUR** PER HOUR

CONTRACTOR'S SHOP 1 See Price List Price List+25% Price List+25%

ORDERING ACTIVITY LOCATION

(WITHIN ESTABLISHED

SERVICE AREAS) 1 See Price List Price List+25% Price List+25%

ORDERING ACTIVITY LOCATION

(OUTSIDE ESTABLISHED

SERVICE AREAS) 1 See Price List Price List+25% Price List+25%

*MINIMUM CHARGES INCLUDE _1_ FULL HOURS ON THE JOB.

**FRACTIONAL HOURS, AT THE END OF THE JOB, WILL BE PRORATED TO THE NEAREST QUARTER

HOUR.

Solutions for Success www.dac.us 703/ 414-5001 (Main Number) 703/ 414-5016 (Contracts)

**FRACTIONAL HOURS, AT THE END OF THE JOB, WILL BE PRORATED TO THE NEAREST

QUARTER HOUR.

10. REPAIR PARTS/SPARE PARTS RATE PROVISIONS

All parts, furnished as spares or as repair parts in connection with the repair of equipment, unless otherwise indicated in this pricelist, shall be new, standard parts manufactured by the equipment manufacturer. All parts shall be furnished at prices indicated in the Contractor's commercial pricelist dated ______________, at a discount of ______% from such listed prices.

11. GUARANTEE/WARRANTY—REPAIR SERVICE AND REPAIR PARTS/SPARE PARTS

Unless specified otherwise in this contract, the Contractor’s standard commercial warranty as stated in the contract’s commercial pricelist will apply to this contract. Please refer to DAC’s Standard Commercial Warranty.

12. INVOICES AND PAYMENTS

a. Maintenance Service

(1) Invoices for maintenance service shall be submitted by the Contractor on a quarterly or monthly basis, after the completion of such period. Maintenance charges must be paid in arrears (31 U.S.C. 3324). PROMPT PAYMENT DISCOUNT, IF APPLICABLE, SHALL BE SHOWN ON THE INVOICE.

(2) Payment for maintenance service of less than one month's duration shall be prorated at 1/30th of the monthly rate for each calendar day.

b. Repair Service and Repair Parts/Spare Parts

Invoices for repair service and parts shall be submitted by the Contractor as soon as possible after completion of work. Payment under blanket purchase agreements will be made quarterly or monthly, except where cash payment procedures are used. Invoices shall be submitted separately to each ordering activity office ordering services under the contract. The cost of repair parts shall be shown as a separate item on the invoice, and shall be priced in accordance with paragraph #10, above. PROMPT PAYMENT DISCOUNT, IF APPLICABLE, SHALL BE SHOWN

ON THE INVOICE.

1. SCOPE

TERMS AND CONDITIONS APPLICABLE TO INFORMATION

TECHNOLOGY (IT) PROFESSIONAL SERVICES (SPECIAL ITEM

NUMBER 54151S)

Solutions for Success www.dac.us 703/ 414-5001 (Main Number) 703/ 414-5016 (Contracts)

a. The prices, terms and conditions stated under Special Item Number 54151S Information Technology Professional Services apply exclusively to IT/IAM Professional Services within the scope of this Information Technology Schedule.

b. The Contractor shall provide services at the Contractor’s facility and/or at the ordering activity location, as agreed to by the Contractor and the ordering activity.

2. PERFORMANCE INCENTIVES I-FSS-60 Performance Incentives (April 2000)

a. Performance incentives may be agreed upon between the Contractor and the ordering activity on individual fixed price orders or Blanket Purchase Agreements under this contract.

b. The ordering activity must establish a maximum performance incentive price for these services and/or total solutions on individual orders or Blanket Purchase Agreements.

c. Incentives should be designed to relate results achieved by the contractor to specified targets. To the maximum extent practicable, ordering activities shall consider establishing incentives where performance is critical to the ordering activity’s mission and incentives are likely to motivate the contractor. Incentives shall be based on objectively measurable tasks.

3. ORDER

a. Agencies may use written orders, EDI orders, blanket purchase agreements, individual purchase orders, or task orders for ordering services under this contract. Blanket Purchase Agreements shall not extend beyond the end of the contract period; all services and delivery shall be made and the contract terms and conditions shall continue in effect until the completion of the order. Orders for tasks which extend beyond the fiscal year for which funds are available shall include FAR 52.232-19 (Deviation – May 2003) Availability of Funds for the Next Fiscal Year. The purchase order shall specify the availability of funds and the period for which funds are available.

b. All task orders are subject to the terms and conditions of the contract. In the event of conflict between a task order and the contract, the contract will take precedence.

4. PERFORMANCE OF SERVICES

a. The Contractor shall commence performance of services on the date agreed to by the Contractor and the ordering activity.

b. The Contractor agrees to render services only during normal working hours, unless otherwise agreed to by the Contractor and the ordering activity.

Solutions for Success www.dac.us 703/ 414-5001 (Main Number) 703/ 414-5016 (Contracts)

c. The ordering activity should include the criteria for satisfactory completion for each task in the Statement of Work or Delivery Order. Services shall be completed in a good and workmanlike manner.

d. Any Contractor travel required in the performance of IT/IAM Services must comply with the Federal Travel Regulation or Joint Travel Regulations, as applicable, in effect on the date(s) the travel is performed. Established Federal Government per diem rates will apply to all Contractor travel. Contractors cannot use GSA city pair contracts.

5. STOP-WORK ORDER (FAR 52.242-15) (AUG 1989)

(a) The Contracting Officer may, at any time, by written order to the Contractor, require the Contractor to stop all, or any part, of the work called for by this contract for a period of 90 days after the order is delivered to the Contractor, and for any further period to which the parties may agree. The order shall be specifically identified as a stop-work order issued under this clause. Upon receipt of the order, the Contractor shall immediately comply with its terms and take all reasonable steps to minimize the incurrence of costs allocable to the work covered by the order during the period of work stoppage. Within a period of 90 days after a stop-work is delivered to the Contractor, or within any extension of that period to which the parties shall have agreed, the Contracting Officer shall either-

(1) Cancel the stop-work order; or

(2) Terminate the work covered by the order as provided in the Default, or the Termination for Convenience of the Government, clause of this contract.

(b) If a stop-work order issued under this clause is canceled or the period of the order or any extension thereof expires, the Contractor shall resume work. The Contracting Officer shall make an equitable adjustment in the delivery schedule or contract price, or both, and the contract shall be modified, in writing, accordingly, if-

(1) The stop-work order results in an increase in the time required for, or in the Contractor's cost properly allocable to, the performance of any part of this contract; and

(2) The Contractor asserts its right to the adjustment within 30 days after the end of the period of work stoppage; provided, that, if the Contracting Officer decides the facts justify the action, the Contracting Officer may receive and act upon the claim submitted at any time before final payment under this contract.

(c) If a stop-work order is not canceled and the work covered by the order is terminated for the convenience of the Government, the Contracting Officer shall allow reasonable costs resulting from the stop-work order in arriving at the termination settlement.

(d) If a stop-work order is not canceled and the work covered by the order is terminated for default, the Contracting Officer shall allow, by equitable adjustment or otherwise, reasonable costs resulting from the stop-work order.

6. INSPECTION OF SERVICES

In accordance with FAR 52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL ITEMS (MAR 2009) (DEVIATION I - FEB 2007) for Firm-Fixed Price orders and FAR 52.212-4 CONTRACT

TERMS AND CONDITIONS COMMERCIAL ITEMS (MAR 2009) (ALTERNATE I OCT 2008)

Solutions for Success www.dac.us 703/ 414-5001 (Main Number) 703/ 414-5016 (Contracts)

(DEVIATION I – FEB 2007) applies to Time-and-Materials and Labor-Hour Contracts orders placed under this contract.

7. RESPONSIBILITIES OF THE CONTRACTOR

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City, or otherwise) covering work of this character. If the end product of a task order is software, then FAR 52.227-14 (Dec 2007) Rights in Data – General, may apply.

8. RESPONSIBILITIES OF THE ORDERING ACTIVITY

Subject to security regulations, the ordering activity shall permit Contractor access to all facilities necessary to perform the requisite IT/IAM Professional Services.

9. INDEPENDENT CONTRACTOR

All IT/IAM Professional Services performed by the Contractor under the terms of this contract shall be as an independent Contractor, and not as an agent or employee of the ordering activity.

10. ORGANIZATIONAL CONFLICTS OF INTEREST

a. Definitions.

“Contractor” means the person, firm, unincorporated association, joint venture, partnership, or corporation that is a party to this contract.

“Contractor and its affiliates” and “Contractor or its affiliates” refers to the Contractor, its chief executives, directors, officers, subsidiaries, affiliates, subcontractors at any tier, and consultants and any joint venture involving the Contractor, any entity into or with which the Contractor subsequently merges or affiliates, or any other successor or assignee of the Contractor.

An “Organizational conflict of interest” exists when the nature of the work to be performed under a proposed ordering activity contract, without some restriction on ordering activities by the Contractor and its affiliates, may either (i) result in an unfair competitive advantage to the Contractor or its affiliates or (ii) impair the Contractor’s or its affiliates’ objectivity in performing contract work.

b. To avoid an organizational or financial conflict of interest and to avoid prejudicing the best interests of the ordering activity, ordering activities may place restrictions on the Contractors, its affiliates, chief executives, directors, subsidiaries and subcontractors at any tier when placing orders against schedule contracts. Such restrictions shall be consistent with FAR

9.505 and shall be designed to avoid, neutralize, or mitigate organizational conflicts of interest that might otherwise exist in situations related to individual orders placed against the schedule contract. Examples of situations, which may require restrictions, are provided at FAR 9.508.

11. INVOICES

The Contractor, upon completion of the work ordered, shall submit invoices for IT/IAM Professional services. Progress payments may be authorized by the ordering activity on

Solutions for Success www.dac.us 703/ 414-5001 (Main Number) 703/ 414-5016 (Contracts) individual orders if appropriate. Progress payments shall be based upon completion of defined milestones or interim products. Invoices shall be submitted monthly for recurring services performed during the preceding month.

12. PAYMENTS

For firm-fixed price orders the ordering activity shall pay the Contractor, upon submission of proper invoices or vouchers, the prices stipulated in this contract for service rendered and accepted. Progress payments shall be made only when authorized by the order. For time-and-materials orders, the Payments under Time-and-Materials and Labor-Hour Contracts at FAR 52.212-4 (MAR 2009) (ALTERNATE I – OCT 2008) (DEVIATION I – FEB 2007) applies to time-and-materials orders placed under this contract. For labor-hour orders, the Payment under Time-and-Materials and Labor-Hour Contracts at FAR 52.212-4 (MAR 2009) (ALTERNATE I – OCT 2008) (DEVIATION I – FEB 2007) applies to labor-hour orders placed under this contract. 52.216- 31(Feb 2007) Time-and-Materials/Labor-Hour Proposal Requirements—Commercial Item Acquisition. As prescribed in 16.601(e)(3), insert the following provision:

(a) The Government contemplates award of a Time-and-Materials or Labor-Hour type of contract resulting from this solicitation.

(b) The offeror must specify fixed hourly rates in its offer that include wages, overhead, general and administrative expenses, and profit. The offeror must specify whether the fixed hourly rate for each labor category applies to labor performed by—

(1) The offeror;

(2) Subcontractors; and/or

(3) Divisions, subsidiaries, or affiliates of the offeror under a common control.

13. RESUMES

Resumes shall be provided to the GSA Contracting Officer or the user ordering activity upon request.

14. INCIDENTAL SUPPORT COSTS

Incidental support costs are available outside the scope of this contract. The costs will be negotiated separately with the ordering activity in accordance with the guidelines set forth in the FAR.

15. APPROVAL OF SUBCONTRACTS

The ordering activity may require that the Contractor receive, from the ordering activity's Contracting Officer, written consent before placing any subcontract for furnishing any of the work called for in a task order.

16. DESCRIPTION OF IT/IAM PROFESSIONAL SERVICES AND PRICING

a. The Contractor shall provide a description of each type of IT/IAM Service offered under Special Item Numbers 132-51 IT/IAM Professional Services should be presented in the same manner as the Contractor sells to its commercial and other ordering activity customers. If the Contractor is proposing hourly rates, a description of all corresponding commercial job titles (labor categories) for those individuals who will perform the service should be provided.

Solutions for Success www.dac.us 703/ 414-5001 (Main Number) 703/ 414-5016 (Contracts)

b. Pricing for all IT/IAM Professional Services shall be in accordance with the Contractor’s customary commercial practices; e.g., hourly rates, monthly rates, term rates, and/or fixed prices, minimum general experience and minimum education.

The following is an example of the manner in which the description of a commercial job title should be presented:

EXAMPLE: Commercial Job Title: System Engineer Minimum/General Experience: Three (3) years of technical experience which applies to systems analysis and design techniques for complex computer systems. Requires competence in all phases of systems analysis techniques, concepts and methods; also requires knowledge of available hardware, system software, input/output devices, structure and management practices.

Functional Responsibility: Guides users in formulating requirements, advises alternative approaches, conducts feasibility studies.

Minimum Education: Bachelor’s Degree in Computer Science

Solutions for Success www.dac.us 703/ 414-5001 (Main Number) 703/ 414-5016 (Contracts)

Solutions for Success www.dac.us 703/ 414-5001 (Main Number) 703/ 414-5016 (Contracts)

Solutions for Success www.dac.us 703/ 414-5001 (Main Number) 703/ 414-5016 (Contracts)

SIN 54151S, LABOR CATEGORIES

Senior Security Engineer: BA/BS or equivalent experience plus 10 years related work experience or advance degree and 8 years related work experience. Duties include but are not limited to providing expert-level advice, analysis, and functional expertise to tasks. Overseeing technical personnel, analyzing and defining security requirements for information protection. Defining and developing security policies.

Senior Security Consultant: BA/BS or equivalent experience plus 10 years related work experience or advance degree and 8 years related work experience. Provides expert-level advice, analysis, and functional expertise to tasks. With expert knowledge of the International Standard (15408), also referred to as the Common Criteria, for specifying and evaluating the security features of computer products and systems, assists organizations in defining and implementing the best Information Security possible and practical for their growing security needs.

Associate Security Engineer: BA/BS or equivalent experience plus up to 5 years work related experience.

Under frequent supervision, works in support of Security Engineer or Sr. Security Engineer. Analyzes and defines security requirements for information protection. Defines and develops security policies.

Analyzes information sensitivity, performs vulnerability and risk assessments. Supports other engineers and senior engineers and consultants.

Associate Software Engineer: BA/BS or equivalent experience plus up to 5 years work related experience.

Under frequent supervision, works in support of Software Engineer or Sr. Software Engineer. Reviews and analyzes system specifications, prepares programming specifications, prepares design plans and written analyses, unit and test scripts, and documentation.

Security Engineer : BA/BS or equivalent experience plus over 5 years related work experience or advance degree and no related work experience. Under general supervision, may work in support of Sr.

Security Engineer. Analyzes and defines security requirements for information protection. Defines and develops security policies. Analyzes information sensitivity, performs vulnerability and risk assessments.

Software Engineer: BA/BS or equivalent plus over 5 years related work experience or advanced degree and no related work experience. Under general supervision, may work in support of Sr. Software Engineer. Engineers software solutions in accordance with client requirements. Reviews and analyzes system specifications, prepares programming specifications, prepares design plans and written analyses, unit and test scripts, and documentation.

Senior Software Engineer: BA/BS or equivalent experience plus 10 years related work experience or advanced degree and 8 years experience. Engineers software solutions in accordance with client requirements. Leads a project and staff or 2 or more software engineers as required. Develops technical documentation detailing the project design parameters.

Project Data Team Leader : Minimum Education: BA/BS Degree or High School Diploma plus four years related work experience. Minimum/General Experience: 0 to 4 years related work experience. Works under general supervision of other Engineers within the information security domain. Duties include, but are not limited to, supporting web and software development and maintenance. This work involves a general knowledge of HTML, JavaScript, Dream weaver and Photoshop applications. Light system administration duties involving a solid knowledge of UNIX/SOLARIS systems and the VI editor may also be required. Performs as team leader on special analysis projects for the Information

Solutions for Success www.dac.us 703/ 414-5001 (Main Number) 703/ 414-5016 (Contracts)

Security Division to include analysis of Website statistics, usage stats and trends in Webmaster emails.

Solutions for Success www.dac.us 703/ 414-5001 (Main Number) 703/ 414-5016 (Contracts)

SIN 54151S, LABOR CATEGORIES

Project Data Specialist: Minimum Education: High School Degree. Minimum/General Experience: 0 to 2 years work related experience. Under frequent supervision works as part of team on special projects within the information security domain. Duties include, but are not limited to, data entry, editing, formatting and proofreading documents and specifications. Primary skills necessary include the ability to edit HTML documents using tools such as Dream weaver, Claris or FrontPage. Duties may also include general administrative tasks relating to the information security domain.

Associate Analyst: Minimum Education: BA Degree. Minimum/General Experience: 0 to 5 years related work experience. Under general supervision, performs analytical, writing and developmental tasks under the direct and detailed instruction of analysts and engineers within the information security domain. Duties include but are not limited to background and content research for technical analysis and specification document production. Responds to client inquiries relating to the information security domain and supports training and proposal development.

Analyst: Minimum Education: BA Degree. Minimum/General Experience: 5 or more years related work experience. Works as team lead with little supervision and applies advanced development and administrative skills and knowledge to perform specific analytical tasks as part of a team in support of information security engineers. Duties include but are not limited to concept and business development and research for technical analysis, requirements analysis and specifications document production. Serves as an expert in information security related information. Note: 4 Years related work experience is equivalent to a college degree.

Optimization Model Developer: B.S. in Engineering, Mathematics, or Operations Research, and 1-5 years experience in optimization. Must have experience in all of the following: OPL Studio , CPlex, ODBC, and C++ or Java. Must be able to formulate and solve mixed integer problems of a moderate size.

Experience in model development and heuristic algorithm implementation is also required.

Senior Optimization Developer: M.S. in Engineering, Mathematics, or Operations Research, and 5-10 years experience in optimization. Must have experience in all of the following: OPL Studio, CPlex, and C++ or Java.