MAS - H. CO. Computer Products - 47QTCA18D005K

AUTHORIZED

INFORMATION TECHNOLOGY SCHEDULE PRICELIST

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY

EQUIPMENT, SOFTWARE AND SERVICES

Multiple Award Schedule No. 33411 Purchase of New Electronic Equipment Mulitple Award Schedule No. 811212 Maintenance of Equipment

MULTIPLE AWARD SCHEDULE 33411 PURCHASE OF NEW ELECTRONIC EQUIPMENT

FSC CLASS 7010 - SYSTEM CONFIGURATION

End User Computers/Desktop Computers

Professional Workstations

Servers

Laptop/Portable/Notebook Computers

Large Scale Computers

Optical and Imaging Systems

Other Systems Configuration Equipment, Not Elsewhere Classified

FSC CLASS 7025 - INPUT/OUTPUT AND STORAGE DEVICES

Printers

Display

Graphics, including Video Graphics, Light Pens, Digitizers, Scanners, and Touch Screens

Network Equipment

Other Communications Equipment

Optical Recognition Input/Output Devices

Storage Devices including Magnetic Storage, Magnetic Tape Storage and Optical Disk Storage

Other Input/Output and Storage Devices, Not Elsewhere Classified

FSC CLASS 7035 - ADP SUPPORT EQUIPMENT

ADP Support Equipment

FSC Class 7042 - MINI AND MICRO COMPUTER CONTROL DEVICES

Microcomputer Control Devices

Telephone Answering and Voice Messaging Systems

FSC CLASS 7050 - ADP COMPONENTS

ADP Boards

FSC CLASS 5995 - CABLE, CORD, AND WIRE ASSEMBLIES: COMMUNICATIONS

EQUIPMENT

Communications Equipment Cables

FSC CLASS 6015 - FIBER OPTIC CABLES

Fiber Optic Cables

FSC CLASS 6020 - FIBER OPTIC CABLE ASSEMBLES AND HARNESSES

Fiber Optic Cable Assemblies and Harnesses

FSC CLASS 6145 - WIRE AND CABLE, ELECTRICAL

Coaxial Cables

FSC Class 5805 - TELEPHONE AND TELEGRAPH EQUIPMENT

Telephone Equipment

Audio and Video Teleconferencing Equipment

FSC CLASS 5810 - COMMUNICATIONS SECURITY EQUIPMENT AND COMPONENTS

Communications Security Equipment

FSC CLASS 5815 - TELETYPE AND FACSIMILE EQUIPMENT

Facsimile Equipment (FAX)

FSC CLASS 5820 - RADIO AND TELEVISION COMMUNICATION EQUIPMENT, EXCEPT

AIRBORNE

Two-Way Radio Transmitters/Receivers/Antennas

Broadcast Band Radio Transmitters/Receivers/Antennas

Microwave Radio Equipment/Antennas and Waveguides

Satellite Communications Equipment

FSC CLASS 5825 - RADIO NAVIGATION EQUIPMENT, EXCEPT AIRBORNE

Radio Navigation Equipment/Antennas

FSC CLASS 5830 - INTERCOMMUNICATION AND PUBLIC ADDRESS SYSTEMS, EXCEPT

AIRBORNE

Pagers and Public Address Systems (wired and wireless transmissions, including background music systems)

FSC CLASS 5895 - MISCELLANEOUS COMMUNICATION EQUIPMENT

Miscellaneous Communications Equipment

NOTE: Installation must be incidental to, in conjunction with and in direct support of the products sold under

MAS 33411 of this contract and cannot be purchased separately. If the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act apply. In applying the Davis-

Bacon Act, ordering activities are required to incorporate wage rate determinations into orders, as applicable.

MULTIPLE AWARD SCHEDULE 811212 - MAINTENANCE OF EQUIPMENT

FSC/PSC Class J070 - Maintenance and Repair Service, Repair Parts/Spare Parts - See FSC Class for

- Repair Service

- Repair Parts/Spare Parts

H. CO. COMPUTER PRODUCTS DBA: THINKCP TECHNOLOGIES

16812 HALE AVE

IRVINE, CA 92606-5021

PHONE: (949)833-3222

FAX: (949) 833-3389

UEI: GNL2NWC66HJ9

Contract Number: 47QTCA18D005K

Period Covered by Contract: January 18, 2018 through January 17, 2028

General Services Administration

Federal Acquisition Service

Pricelist current as of Supplement Number: PS-0038, effective date 06/03/2024.

Products and ordering information in this Authorized Information Technology Schedule Pricelist are also available on the GSA Advantage! System (http://www.gsaadvantage.gov).

TABLE OF CONTENTS

• INFORMATION FOR ORDERING ACTIVITIES

• TERMS AND CONDITIONS APPLICABLE TO MAS 33411 -- Purchase of New

Electronic Equipment

• TERMS AND CONDITIONS APPLICABLE TO MAS 811212 – Maintenance of

Equipment

• USA COMMITMENT TO PROMOTE SMALL BUSINESS PARTICIPATION

PROCUREMENT PROGRAMS

• BLANKET PURCHASE AGREEMENT

• BASIC GUIDELINES FOR USING “CONTRACTOR TEAM ARRANGEMENTS”

• GSA/FSS INFORMATION TECHNOLOGY PRICELIST

INFORMATION FOR ORDERING ACTIVITIES

APPLICABLE TO ALL SPECIAL ITEM NUMBERS

SPECIAL NOTICE TO AGENCIES: Small Business Participation

SBA strongly supports the participation of small business concerns in the Federal Acquisition Service. To enhance

Small Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.

For orders exceeding the micropurchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage! on-line shopping service (www.gsaadvantage.gov). The catalogs/pricelists, GSA Advantage! and the Federal

Acquisition Service Home Page (www.gsa.gov/fas) contain information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women -owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micropurchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.

1. GEOGRAPHIC SCOPE OF CONTRACT:

Domestic delivery is delivery within the 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC, and

U.S. Territories. Domestic delivery also includes a port or consolidation point, within the aforement ioned areas, for orders received from overseas activities.

Overseas delivery is delivery to points outside of the 48 contiguous states, Washington, DC, Alaska, Hawaii, Puerto

Rico, and U.S. Territories.

Offerors are requested to check one of the following boxes:

[ ] The Geographic Scope of Contract will be domestic and overseas delivery.

[ ] The Geographic Scope of Contract will be overseas delivery only.

[X] The Geographic Scope of Contract will be domestic delivery only.

For Special Item Number 132-53 Wireless Services ONLY, if awarded, list the limited geographic coverage area:

2. CONTRACTOR’S ORDERING ADDRESS AND PAYMENT INFORMATION:

H. Co. Computer Products, Inc.®

DBA ThinkCP Technologies™ 16812 Hale Avenue Irvine, CA 92606

PHONE: (949) 833-3222 [Extension 153] TOLL FREE: (800) 726-2477 [Extension 153]

FACSIMILE: (949) 833-3389

Contractor must accept the credit card for payments equal to or less than the micro-purchase for oral or written orders under this contract. The Contractor and the ordering agency may agree to use the credit card for dollar amounts over the micro-purchase threshold (See GSAR 552.232-79 Payment by Credit Card). In addition, bank account information for wire transfer payments will be shown on the invoice.

The following telephone number(s) can be used by ordering activities to obtain technical and/or ordering assistance:

PHONE: (949) 833-3222 [Extension 153]

When Authorized Dealers are allowed by the Contractor to bill ordering activities and accept payment, the order and/or payment must be in the name of the Contractor, in care of the Authorized Dealer.

3. LIABILITY FOR INJURY OR DAMAGE

The Contractor shall not be liable for any injury to ordering activity personnel or damage to ordering activity property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.

4. STATISTICAL DATA FOR GOVERNMENT ORDERING OFFICE COMPLETION OF

STANDARD FORM 279:

Block 9: G. Order/Modification Under Federal Schedule Contract

Block 16: Data Universal Numbering System (DUNS) Number: 602861726

Block 30: Type of Contractor: B. Other Small Business

Block 31: Woman-Owned Small Business - No

Block 37: Contractor's Taxpayer Identification Number (TIN): 33-0443198

Block 40: Veteran Owned Small Business (VOSB): No

A: Service Disabled Veteran Owned Small Business

B: Other Veteran Owned Small Business

4a. CAGE Code: 0K826

4b. Contractor has registered with the Central Contractor Registration Database.

5. FOB DESTINATION CONUS; KENDALL HOWARD PRODUCTS ARE FOB ORIGIN

6. DELIVERY SCHEDULE

a. TIME OF DELIVERY: The Contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as set forth below:

MULTIPLE AWARD SCHEDULE DELIVERY TIME (Days ARO)

33411 30 Days

MULTIPLE AWARD SCHEDULE EXPEDITED DELIVERY TIME (Days ARO)

33411 As Negotiated between H. Co. and contracting activity;

deliveries will be offered at current carrier rates.

MULTIPLE AWARD SCHEDULE DELIVERY TIME (Days ARO)

811212 30 Days

OVERNIGHT AND 2-DAY DELIVERY TIMES. Schedule customers may require overnight or 2-day delivery.

Such deliveries will be offered at current carrier next day & 2nd day delivery rates.

b. URGENT REQUIREMENTS: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering activity, ordering activities are encouraged, if time permits, to contact the Contractor for the purpose of obtaining accelerated delivery. The Contractor shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) I f the

Contractor offers an accelerated delivery time acceptable to the ordering activity, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

c. i. SIN 132-54 and SIN 132-55, ACCELERATED SERVICE DELIVERY (7 calendar days or less): the time required for COMSATCOM services to be available after order award. Under Accelerated Service Task Orders, service acceptance testing, unless otherwise required by the satellite provider or host nation, shall be deferred until

Ordering Activity operations permit.

ii. SIN 132-54 and SIN 132-55, TIME-CRITICAL DELIVERY (4 hours or less): the time required for

COMSATCOM services to be available after order award. Under Time-Critical Task Orders, service acceptance testing unless otherwise required by the satellite provider or host nation shall be deferred until Ordering Activity operations permit. Time-Critical Delivery sha ll be predicated on the availability of COMSATCOM transponded capacity (contracted bandwidth and power, pre-arranged Host Nation Agreements, frequency clearance) or

COMSATCOM subscription services (bandwidth, terminals, network resources, etc.).

iii. For SIN 132-54 and SIN 132-55, EXTENDED SERVICE DELIVERY TIMES: the time required under extenuating circumstances for COMSATCOM services to be available after order award. Such extenuating circumstances may include extended time required for host nation agreements or landing rights, or other time intensive service delivery requirements as defined in the individual requirement. Any such extended delivery times will be negotiated between the Ordering Activity and Contractor.

7. DISCOUNTS: Prices shown are NET Prices; We are not offering any discount for early payments.

a . Prompt Payment: Net 30 days from receipt of invoice or date of acceptance in accordance with the applicable FARs, whichever is later.

b. Quantity: None

c. Dollar Volume: None

d. Government Educational Institutions: Offered the same discounts as all other

Government customers.

e. Discount for use of Government Commercial Credit Card: Commercial Credit Cards offered at no discount

f. Other Special Discounts: None

8. TRADE AGREEMENTS ACT OF 1979, as amended:

All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.

9. STATEMENT CONCERNING AVAILABILITY OF EXPORT PACKING:

10. Small Requirements: The minimum dollar of orders to be issued is $100.00.

11. MAXIMUM ORDER (All dollar amounts are exclusive of any discount for prompt payment.)

a. The Maximum Order for the following Special Item Numbers (SINs) is $500,000:

Multiple Award Schedule No. 33411 Purchase of New Electronic Equipment

Mulitple Award Schedule No. 811212 Maintenance of Equipment

12. ORDERING PROCEDURES FOR FEDERAL SUPPLY SCHEDULE CONTRACTS

Ordering activities shall use the ordering procedures of Federal Acquisition Regulation (FAR) 8.405 when placing an order or establishing a BPA for supplies or services. These procedures apply to all schedules.

a . FAR 8.405-1 Ordering procedures for supplies, and services not requiring a statement of work.

b. FAR 8.405-2 Ordering procedures for services requiring a statement of work.

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS

REQUIREMENTS: ordering activities acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index). Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing Standards (FIPS) or

Federal Telecommunication Standards (FED-STDS), which are cited by ordering activities, shall be responded to promptly by the Contractor.

13.1 FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS PUBS):

Information Technology products under this Schedule that do not conform to Federal Information Processing

Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS

Publication." Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S.

Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security

Act. Information concerning their availability and applicability should be obtained from the National Technical

Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use. Individual orders for FIPS PUBS should be referred to the NTIS

Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487-4650.

13.2 FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS): Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD." Federal

Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and

Technology (NIST), pursuant to National Security Act. Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Acquisition Service, Specification Section, 470

East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619-8925. Please include a self-addressed mailing label when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301)975-2833.

14. CONTRACTOR TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2003)

(a) Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract. All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the Multiple Award Schedule.

(b) Travel: The Contractor may be required to travel in performance of orders issued under this contract.

Allowable travel and per diem charges are governed by Pub .L. 99-234 and FAR Part 31, and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the Multiple Award

Schedule. Travel in performance of a task order will only be reimbursable to the extent authorized by the ordering agency. The Industrial Funding Fee does NOT apply to travel and per diem charges.

(c) Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific FSC/service code classifications offered. All costs associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the Multiple Award Schedule program.

(d) Insurance: As a commercial practice, the Contractor may be required to obtain/possess insurance coverage for specific FSC/service code classifications offered. All costs associated with obtaining/possessing such insurance should be factored into the price offered under the Multiple Award Schedule program.

(e) Personnel: The Contractor may be required to provide key personnel, resumes or skill category descriptions in the performance of orders issued under this contract. Ordering activities may require agency approval of additions or replacements to key personnel.

(f) Organizational Conflicts of Interest: Where there may be an organizational conflict of interest as determined by the ordering agency, the Contractor’s participation in such order may be restricted in accordance with FAR Part

9.5.

(g) Documentation/Standards: The Contractor may be requested to provide products or services in accordance with rules, regulations, OMB orders, standards and documentation as specified by the agency’s order.

(h) Data/Deliverable Requirements: Any required data/deliverables at the ordering level will be as specified or negotiated in the agency’s order.

(i) Government-Furnished Property: As specified by the agency’s order, the Government may provide property, equipment, materials or resources as necessary.

(j) Availability of Funds: Many Government agencies’ operating funds are appropriated for a specific fiscal year.

Funds may not be presently available for any orders placed under the contract or any option year. The

Government’s obligation on orders placed under this contract is contingent upon the availability of appropriated funds from which payment for ordering purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are available to the ordering Contra cting Officer.

(k) Overtime: For professional services, the labor rates in the Schedule should not vary by virtue of the Contractor having worked overtime. For services applicable to the Service Contract Act (as identified in the Schedule), the labor rates in the Schedule will vary as governed by labor laws (usually assessed a time and a half of the labor rate).

15. CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES: Any ordering activity, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR 52.212-4, paragraphs (l) Termination for the ordering activity’s convenience, and (m) Termination for Cause (See 52.212-4)

16. GSA ADVANTAGE!

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

(1) Manufacturer;

(2) Manufacturer's Part Number; and

(3) Product categories.

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.:

NetScape). The Internet address is http://www.gsaadvantage.gov

17. PURCHASE OF OPEN MARKET ITEMS

NOTE: Open Market Items are also known as incidental items, noncontract items, non-Schedule items, and items not on a Federal Supply Schedule contract. Ordering Activities procuring open market items must follow FAR 8.402(f).

For administrative convenience, an ordering activity contracting officer may add items not on the Federal Supply

Multiple Award Schedule (MAS) -- referred to as open market items -- to a Federal Supply Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if-

(1) All applicable acquisition regulations pertaining to the purchase of the items not on the Federal

Supply Schedule have been followed (e.g., publicizing (Part 5), competition requirem ents (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs (Part 19));

(2) The ordering activity contracting officer has determined the price for the items not on the Federal

Supply Schedule is fair and reasonable;

(3) The items are clearly labeled on the order as items not on the Federal Supply Schedule; and

(4) All clauses applicable to items not on the Federal Supply Schedule are included in the order.

18. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

c. The maintenance/repair service provided is the standard commercial terms and conditions for the type of products and/or services awarded.

19. OVERSEAS ACTIVITIES

The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:

OUTSIDE THE SCOPE OF THIS CONTRACT; PROVIDED AT ADDITIONAL COSTS

TO GOVERNMENT

Upon request of the Contractor, the ordering activity may provide the Contractor with logistics support, as available, in accordance with all applicable ordering activity regulations. Such ordering activity support will be provided on a reimbursable basis, and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract .

20. BLANKET PURCHASE AGREEMENTS (BPAs)

The use of BPAs under any schedule contract to fill repetitive needs for supplies or services is allowable. BPAs may be established with one or more schedule contractors. The number of BPAs to be established is within the discretion of the ordering activity establishing the BPA and should be based on a strategy that is expected to maximize the effectiveness of the BPA(s). Ordering activities shall follow FAR 8.405-3 when creating and implementing BPA(s).

21. CONTRACTOR TEAM ARRANGEMENTS

Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238-74, Industrial Funding Fee and Sales Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

22. INSTALLATION, DEINSTALLATION, REINSTALLATION

The Davis-Bacon Act (40 U.S.C. 276a -276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer o r mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of

Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishin g of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract.

However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the

Davis-Bacon Act applies.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under MAS 33411 and 811212.

23. SECTION 508 COMPLIANCE.

I certify that in accordance with 508 of the Rehabilitation Act of 1973, as amended (29 U.S.C. 794d), FAR 39.2, and the Architectural and Transportation Barriers Compliance Board Electronic and Information Technology (EIT)

Accessibility Standards (36 CFR 1194) General Services Administration (GSA), that all IT hardware/software/services are 508 compliant:

Yes ___X____ No _______

The offeror is required to submit with its offer a designated area on its website that outlines the Voluntary Product

Accessibility Template (VPAT) or equivalent qualification, which ultimately becomes the Government Product

Accessibility Template (GPAT). Section 508 compliance information on the supplies and services in this contract are available at the following website address (URL): http://www.thinkcp.com/gsa/section508.asp

The EIT standard can be found at: www.Section508.gov/.

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES.

Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order –

(a) A copy of the authorization from the ordering activity with whom the contractor has the prime contract (unless a copy was previously furnished to the Federal Supply Schedule contractor); and

(b) The following statement:

This order is placed under written authorization from _______ dated _______. In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply

Schedule contract, the latter will govern.

25. INSURANCE—WORK ON A GOVERNMENT INSTALLATION (JAN 1997)(FAR 52.228-5)

(a) The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

http://www.section508.gov/

(b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective—

(1) For such period as the laws of the State in which this contract is to be performed prescribe; or

(2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors' proofs of required insurance, and shall make copies available to the Contracting Officer upon request.

26. SOFTWARE INTEROPERABILITY.

Offerors are encouraged to identify within their software items any component interfaces that support op en standard interoperability. An item’s interface may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.

27. ADVANCE PAYMENTS

A payment under this contract to provide a service or deliver an article for the United States Government may not be more than the value of the service already provided or the article already delivered. Advance or pre-payment is not authorized or allowed under this contract. (31 U.S.C. 3324) http://www.core.gov/

TERMS AND CONDITIONS APPLICABLE TO PURCHASE OF

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY NEW

ELECTRONIC EQUIPMENT MAS 33411)

1. MATERIAL AND WORKMANSHIP

All equipment furnished hereunder must satisfactorily perform the function for which it is intended.

2. ORDER

Written orders, EDI orders (GSA Advantage! and FACNET), credit card orders, and orders placed under blanket purchase agreements (BPA) agreements shall be the basis for purchase in accordance with the provisions of this contract. If time of delivery extends beyond the expiration date of the contract, the Contractor will b e obligated to meet the delivery and installation date specified in the original order.

For credit card orders and BPAs, telephone orders are permissible.

3. TRANSPORTATION OF EQUIPMENT

FOB DESTINATION. Prices cover equipment delivery to destination, for any location within the geographic scope of this contract.

4. INSTALLATION AND TECHNICAL SERVICES

a. INSTALLATION. When the equipment provided under this contract is not normally self -installable, the

Contractor's technical personnel shall be available to the ordering activity, at the ordering activity's location, to install the equipment and to train ordering activity personnel in the use and maintenance of the equipment. The charges, if any, for such services are listed below, or in the price schedule:

All products are self-installable. [Note: If training or installa tion should be deemed necessary for any reason, arrangements can be made outside the scope of this contract].

b. INSTALLATION, DEINSTALLATION, REINSTALLATION. The Davis-Bacon Act (40 U.S.C. 276a-

276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the

United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis -

Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services.

For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act applies.

The ordering activity issuing the task order against this contract will be responsible f or proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinsta llation services under MAS 33411 and 811212.

c. OPERATING AND MAINTENANCE MANUALS. The Contractor shall furnish the ordering activity with one (1) copy of all operating and maintenance manuals which are normally provided with the equipment being purchased.

5. INSPECTION/ACCEPTANCE

The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The ordering activity reserves the right to inspect or test any equipment tha t has been tendered for acceptance. The ordering activity may require repair or replacement of nonconforming equipment at no increase in contract price.

The ordering activity must exercise its postacceptance rights (1) within a reasonab le time after the defect was discovered or should have been discovered; and (2) before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

6. WARRANTY

a. Unless specified otherwise in this contra ct, the Contractor’s standard commercial warranty as stated in the contract’s commercial pricelist will apply to this contract.

1. The contractor will furnish all maintenance, machine adjustments, repairs, and parts at the Government s location for lifetime.

2. All parts replaced during the guarantee period shall become the property of the contractor.

3. Prior to the expiration of the guarantee period, whenever equipment is shipped for repair or mechanical replacement purposes, the contractor shall bear a ll costs, including, but not limited to, costs of packing, transportation, rigging, drayage, and insurance. This guarantee shall apply to the replacement machine from the date of its acceptance.

4. When equipment is returned to the contractor s establishment for repairs, the contractor shall be responsible for any damage or loss, from the time the equipment is removed from the Government s installation, until the equipment is returned to such installation.

5. This guarantee does not apply if damage to the equipment is occasioned by fault or negligence of the

Government.

6. Inspection and repair of defective equipment under this guarantee will only be performed at the contractor’s plant at the following address:

H.Co. Computer Products, Inc. (dba ThinkCP Technologies)

16812 Hale Avenue, Irvine, CA 92606

— and defective equipment will be repaired or replaced within 48 hours after receipt.

b. The Contractor warrants and implies that the items delivered hereunder a re merchantable and fit for use for the particular purpose described in this contract.

c. Limitation of Liability. Except as otherwise provided by an express or implied warranty, the Contractor will not be liable to the ordering activity for consequential damages resulting from any defect or deficiencies in accepted items.

d. If inspection and repair of defective equipment under this warranty will be performed at the Contractor's plant, the address is as follows:

H. Co. Computer Products, Inc.

dba ThinkCP(TM) Technologies

16812 Hale Avenue

Irvine, CA 92606

7. PURCHASE PRICE FOR ORDERED EQUIPMENT

The purchase price that the ordering activity will be charged will be the ordering activity purchase price in effect at the time of order placement, or the ordering activity purchase price in effect on the installation date (or delivery date when installation is not applicable), whichever is less.

8. RESPONSIBILITIES OF THE CONTRACTOR

The Contractor shall comply with all laws, ordinances, and regulations (Federa l, State, City or otherwise) covering work of this character, and shall include all costs, if any, of such compliance in the prices quoted in this offer.

9. TRADE-IN OF INFORMATION TECHNOLOGY EQUIPMENT

When an ordering activity determines that Information Technology equipment will be replaced, the ordering activity shall follow the contracting policies and procedures in the Federal Acquisition Regulation (FAR), the policies and procedures regarding disposition of information technology excess personal property in the Federal Property

Management Regulations (FPMR) (41 CFR 101-43.6), and the policies and procedures on exchange/sale contained in the FPMR (41 CFR part 101-46).

TERMS AND CONDITIONS APPLICABLE TO REPAIR

SERVICE AND REPAIR PARTS/SPARE PARTS FOR GOVERNMENT-OWNED

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY

EQUIPMENT, RADIO/TELEPHONE EQUIPMENT, (AFTER EXPIRATION OF

GUARANTEE/WARRANTY PROVISIONS AND/OR WHEN REQUIRED SERVICE IS

NOT COVERED BY GUARANTEE/WARRANTY PROVISIONS) AND FOR LEASED

EQUIPMENT (MAS 811212)

1. SERVICE AREAS

a. The repair service rates listed herein are applicable to any ordering activity location within a 0 mile radius of the Contractor’s service points. If any additional charge is to apply because of the greater distance from the

Contractor’s service locations, the mileage rate or other distance factor shall be negotiated at the Task Order level.

b. When repair services cannot be performed at the ordering activity installation site, the repair services will be performed at the Contractor's plant(s) listed below:

16812 HALE AVE

IRVINE, CA 92606-5021

2. REPAIR SERVICE AND REPAIR PARTS/SPARE PARTS ORDERS

a. Agencies may use written orders, EDI orders, credit card orders, blanket purchase agreements (BPAs), or small order procedures for ordering repair service and/or repair parts/spare parts under this contract. Orders for repair service shall not extend beyond the end of the contract period.

b. When repair service is ordered, only one chargeable repairman shall be dispatched to perform repair service, unless the ordering activity agrees, in advance, that additional repair personnel are required to effect repairs.

3. LOSS OR DAMAGE

When the Contractor removes equipment to his establishment for repairs, the Contractor shall be responsible for any damage or loss, from the time the equipment is removed from the ordering activity installation, until the equipment is returned to such installation.

4. SCOPE

a. The Contractor shall provide maintenance for all equipment listed herein, as requested by the ordering activity during the contract term. Repair service and repair parts/spare parts shall apply exclusively to the equipment types/models within the scope of this Information Technology Schedule.

b. Equipment placed under maintenance service shall be in good operating condition.

(1) In order to determine that the equipment is in good operating condition, the equipment shall be subject to inspection by the Contractor, without charge to the ordering activity.

(2) Costs of any repairs performed for the purpose of placing the equipment in good operating condition shall be borne by the Contractor, if the equipment was under the Contractor's guarantee/warranty or maintenance responsibility prior to the effective date of the maintenance order.

(3) If the equipment was not under the Contractor's responsibility, the costs necessary to place the equipment in proper operating condition are to be borne by the ordering activity, in accordance with the provisions of Multiple Award Schedule MAS 811212 (or outside the scope of this contract).

5. RESPONSIBILITIES OF THE ORDERING ACTIVITY

a. Ordering activity personnel shall not perform maintenance or attempt repairs to equipment while such equipment is under the purview of a maintenance order, unless agreed to by the Contractor.

b. Subject to security regulations, the ordering activity shall permit access to the equipment which is to be maintained or repaired.

c. If the Ordering Activity desires a factory authorized/certified service personnel then this should be clearly stated in the task or delivery order.

6. RESPONSIBILITIES OF THE CONTRACTOR

a. For equipment not covered by a maintenance contract or warranty, the Contractor's repair service personnel shall complete repairs as soon as possible after notification by the ordering activity that service is required. Within the service areas, this repair service should normally be done within 4 hours after notification.

b. If the Ordering Activity task or delivery order specifies a factory authorized/certified service personnel then the

Contractor is obligated to provide such a factory authorized/certified service personnel for the equipment to be repaired or serviced, unless otherwise agreed to in advance between the Agency and the Contractor.

7. REPAIR SERVICE RATE PROVISIONS

a. CHARGES. Charges for repair service will include the labor charge, computed at the rates set forth below, for the time during which repairmen are actually engaged in work, and, when applicable, the charge for travel or transportation.

b. MULTIPLE MACHINES. When repairs are ordered by a ordering activity on two or more machines located in one or more buildings within walking distance of each other, the charges will be computed from the time the repairman commences work on the first machine, until the work is completed on the last machine. The time required to go from one machine to another, or from one building to another, will be considered actual work performance, and chargeable to the ordering activity, provided the time consumed in going between machines (or buildings) is reasonable.

c. TRAVEL OR TRANSPORTATION

(1) AT THE CONTRACTOR'S SHOP

(a) When equipment is returned to the Contractor's shop for adjustments or repairs which are not covered by the guarantee/warranty provision, the cost of transportation, packing, etc., from the ordering activity location to the Contractor's plant, and return to the ordering activity location, shall be borne by the ordering activity.

(b) The ordering activity should not return defective equipment to the Contractor for adjustments and repairs or replacement without his prior consultation and instruction.

(2) AT THE ORDERING ACTIVITY LOCATION (Within Established Service Areas)

When equipment is repaired at the ordering activity location, and repair service rates are established for service areas or zones, the listed rates are applicable to any ordering activity location within such service areas or zones. No extra charge, time, or expense will be allowed for tra vel or transportation of repairmen or machines to or from the ordering activity office; such overhead is included in the repair service rates listed.

(3) AT THE ORDERING ACTIVITY LOCATION (Outside Established Service Areas)

(a) If repairs are to be made at the ordering activity location, and the location is outside the service area as shown in paragraph 1.a, the repair service and mileage rates negotiated per subparagraphs 1.a and 8.d will apply.

(b) When the overall travel charge computed at the above mileage rate is unreasonable

(considering the time required for travel, actual and necessary transportation costs, and the allowable ordering activity per diem rate for each night the repairman is required to remain overnight at the ordering activity location), the ordering activity shall have the option of reimbursing the Contractor for actual costs, provided that the actual costs are reasonable and allowable. The Contractor shall furnish the ordering activity with a report of travel performed and related expenses incurred. The report shall include departure and arrival dates, times, and the applicable mode of travel.

d. LABOR RATES

(1) REGULAR HOURS

The Regular Hours repair service rates listed herein shall entitle the ordering activity to repair service during the period 8:00 a.m. to 5:00 p.m., Monday through Frida y, exclusive of holidays observed at the ordering activity location. There shall be no additional charge for repair service which was requested during Regular

Hours, but performed outside the Regular Hours defined above, at the convenience of the Contractor.

(2) AFTER HOURS

When the ordering activity requires that repair service be performed outside the Regular Hours defined above, except Sundays and Holidays observed at the ordering activity locat ion, the After Hours repair service rates listed herein sha ll apply. The Regular Hours rates defined above shall apply when repair service is requested during Regular Hours, but performed After Hours at the convenience of the Contractor.

(3) SUNDAYS AND HOLIDAYS

When the ordering activity requires that repair service be performed on Sundays and Holidays observed at the ordering activity location, the Sundays and Holidays repair service rates listed herein shall apply. When repair service is requested to be performed during Regular Hours and/or After Hours, but is performed at the convenience of the Contractor on Sundays or Holidays observed at the ordering activity location, the

Regular Hours and/or After Hours repair service rates, as applicable, shall apply.

REPAIR SERVICE RATES

REGULAR AFTER SUNDAYS AND

MINIMUM HOURS HOURS HOLIDAYS

LOCATION CHARGE* PER HOUR** PER HOUR** PER HOUR

CONTRACTOR'S SHOP $N/C $N/C $N/C $N/C

*MINIMUM CHARGES INCLUDE 0 FULL HOURS ON THE JOB.

**FRACTIONAL HOURS, AT THE END OF THE JOB, WILL BE PRORATED TO THE NEAREST QUARTER

HOUR.

8. REPAIR PARTS/SPARE PARTS RATE PROVISIONS

All parts, furnished as spares or as repair parts in connection with the repair of equipment, unless otherwise indicated in this pricelist, shall be new, standard parts manufactured by the equipment manufacturer. All parts shall be furnished at prices indicated in the Contractor's commercial pricelist dated 2/2/2012, at a discount of 40% from such listed prices.

9. GUARANTEE/WARRANTY—REPAIR SERVICE AND REPAIR PARTS/SPARE PARTS

a. REPAIR SERVICE

All repair work will be guaranteed/warranted for the lifetime of the product.

b. REPAIR PARTS/SPARE PARTS

All parts, furnished either as spares or repairs parts will be guaranteed/warranted for the lifetime of the product.

10. INVOICES AND PAYMENTS

a. Repair Service and Repair Parts/Spare Parts

Invoices for repair service and parts shall be submitted by the Contractor as soon as possible after completion of work. Payment under blanket purchase agreements will be made quarterly or monthly, except where cash payment procedures are used. Invoices shall be submitted separately to each ordering activity office ordering services under the contract. The cost of repair parts shall be shown as a separate item on the invo ice, and shall be priced in accordance with paragraph #7, above. PROMPT PAYMENT DISCOUNT, IF APPLICABLE, SHALL BE SHOWN

ON THE INVOICE.

USA COMMITMENT TO PROMOTE

SMALL BUSINESS PARTICIPATION

PROCUREMENT PROGRAMS

PREAMBLE

H. CO. COMPUTER PRODUCTS DBA: THINKCP TECHNOLOGIES provides commercial products and services to ordering activities. We are committed to promoting participation of small, small disadvantaged and women -owned small businesses in our contracts. We pledge to provide opportunities to the sm all business community through reselling opportunities, mentor-protégé programs, joint ventures, teaming arrangements, and subcontracting.

COMMITMENT

To actively seek and partner with small businesses.

To identify, qualify, mentor and develop small, small disadvantaged and women-owned small businesses by purchasing from these businesses whenever practical.

To develop and promote company policy initiatives that demonstrate our support for awarding contracts and subcontracts to small business concerns.

To undertake significant efforts to determine the potential of small, small disadvantaged and women-owned small business to supply products and services to our company.

To insure procurement opportunities are designed to permit the maximum possible participation of small, small disadvantaged, and women-owned small businesses.

To attend business opportunity workshops, minority business enterprise seminars, trade fairs, procurement conferences, etc., to identify and increase small businesses with whom to partner.

To publicize in our marketing publications our interest in meeting small businesses that may be interested in subcontracting opportunities.

We signify our commitment to work in partnership with small, small disadvantaged and women -owned small businesses to promote and increase their participation in ordering activity contracts. To accelerate potential opportunities please contact:

Company Point of contact: Gary Richardson

Phone number: (800) 726-2477 Extension 153; (949) 833-3222 Extension 153

E-mail address: GRichardson@ThinkCP.com

Fax number: (949) 833-3389

BEST VALUE

BLANKET PURCHASE AGREEMENT

FEDERAL SUPPLY SCHEDULE

(Insert Customer Name)

In the spirit of the Federal Acquisition Streamlining Act (ordering activity) and (Contractor) enter into a cooperative agreement to further reduce the administrative costs of acquiring commercial items from the General Services

Administration (GSA) Federal Supply Schedule Contract(s) ____________________.

Federal Supply Schedule contract BPAs eliminate contracting and open market costs such as: search for sources; the development of technical documents, solicitations and the evaluation of offers. Teaming Arrangements are permitted with Federal Supply Schedule Contractors in accordance with Federal Acquisition Regulation (FAR) 9.6.

This BPA will further decrease costs, reduce paperwork, and save time by eliminating the need for repetitive, individual purchases from the schedule contract. The end result is to create a purchasing mechanism for the ordering activity that works better and costs less.

Signatures

Ordering Activity Date Contractor Date

BPA NUMBER_____________

(CUSTOMER NAME)

BLANKET PURCHASE AGREEMENT

Pursuant to GSA Federal Supply Schedule Contract Number(s)____________, Blanket Purchase Agree ments, the

Contractor agrees to the following terms of a Blanket Purchase Agreement (BPA) EXCLUSIVELY WITH (ordering activity):

(1) The following contract items can be ordered under this BPA. All orders placed against this BPA are subject to the terms and conditions of the contract, except as noted below:

MODEL NUMBER/PART NUMBER *SPECIAL BPA DISCOUNT/PRICE

(2) Delivery:

DESTINATION DELIVERY SCHEDULES / DATES

(3) The ordering activity estimates, but does not guarantee, that the volume of purchases through this agreement will be _________________________.

(4) This BPA does not obligate any funds.

(5) This BPA expires on _________________ or at the end of the contract period, whichever is earlier.

(6) The following office(s) is hereby authorized to place orders under this BPA:

OFFICE POINT OF CONTACT

(7) Orders will be placed against this BPA via Electronic Data Interchange (EDI), FAX, or paper.

(8)…