Federal Supply Schedule 47QSWA23D0050

GENERAL SERVICES ADMINISTRATION

FEDERAL SUPPLY SERVICE

AUTHORIZED FEDERAL SUPPLY SCHEDULE PRICE LIST

On-line access to contract ordering information, terms and conditions, up-to-date pricing, and the option to create an electronic delivery order are available through GSA Advantage!, a menu-driven database system. The Internet address for GSA Advantage! is: http://www.gsaadvantage.gov

FEDERAL SUPPLY SCHEDULE CONTRACT SCHEDULE TITLE:

THE MULTIPLE AWARD SCHEDULE (MAS)

Large Category J: Security and Protection

CONTRACT NUMBER:

47QSWA23D0050

PERIOD COVERED BY CONTRACT:

4/6/2023 – 4/5/2028 senseFly, Inc.

10107 Division DR Raleigh, NC, 27603

(P) +41 21 552 04 40

(F) +41 21 552 04 66 www.sensefly.com

Contractor’s Administration Source:

Michael O’Sullivan +41 21 552 04 40 michael.osullivan@ageagle.com

General Services Administration Management Services Center Acquisition Division

Effective 4/6/2023

Business Size: Small

For more information on ordering from Federal Supply Schedules click on the FSS Schedules button at http://www.fss.gsa.gov.

senseFly Inc. 47QSWA23D0050 Page 2

1a.

1b.

Table of awarded special item number(s) with appropriate cross-reference to item descriptions and awarded price(s).

334220 - Surveillance Systems, Wearable Body Cameras, and Vehicular Video

Identification of the lowest priced model number and lowest unit price for that model for each special item number awarded in the contract. This price is the Government price based on a unit of one, exclusive of any quantity/dollar volume, prompt payment, or any other concession affecting price. Those contracts that have unit prices based on the geographic location of the customer, should show the range of the lowest price, and cite the areas to which the prices apply. See below.

2. Maximum order.

SIN 334220: $250,000

If the “best value” selection places your order over this Maximum Order identified in this catalog/ pricelist, you have an opportunity to obtain a better schedule contract price. Before placing your order, contact the aforementioned contractor for a better price. The contractor may

(1) offer a new price for this requirement; (2) offer the lowest price available under this contract;

or (3) decline the order. A delivery order that exceeds the maximum order may be placed under the Schedule contract in accordance with FAR 8.404.

3. Minimum order.

$100.00

4. Geographic coverage (delivery area).

48 Contiguous States including Washington, DC, Alaska, Hawaii, and Puerto Rico

5. Point(s) of production:

10107 Division DR Raleigh, NC, 27603

Route de Genève 38 1033 Cheseaux-sur-Lausanne Switzerland

6. Discount from list prices or statement of net price.

Net GSA pricing is listed in the attached pricing table

7. Quantity discounts.

10% discount with 10 or more same line item units purchased per order

8. Prompt payment terms.

0%, Net 30 Days

Information for Ordering Offices: Prompt payment terms cannot be negotiated out of the contractual agreement in exchange for other concessions.

9. Foreign items (list items by country of origin).

See attached Pricelist

GSA AWARDED TERMS AND CONDITIONS

senseFly, Inc.

senseFly Inc. 47QSWA23D0050 Page 3

10a. Time of delivery.

14 DARO

10b. Expedited Delivery.

Contact Contractor at the Order Level for terms and pricing

10c. Overnight and 2-day delivery.

10d. Urgent Requirements.

11. F.O.B. point.

Destination

12a. Ordering address.

senseFly Inc.

10107 Division Dr Raleigh, NC, 27603

(P) +41 21 552 04 40

12b. Ordering procedures: For supplies and services, the ordering procedures, information on

Blanket Purchase Agreements (BPA’s) are found in Federal Acquisition Regulation (FAR) 8.405- 3.

13. Payment address.

senseFly Inc.

10107 Division Dr Raleigh, NC, 27603

(P) +41 21 552 04 40

14. Warranty provision.

See attached Warranty Provision

15. Export packing charges, if applicable.

NOT APPLICABLE

16. Terms and conditions of rental, maintenance, and repair (if applicable).

17. Terms and conditions of installation (if applicable).

senseFly Inc. 47QSWA23D0050 Page 4

18a. Terms and conditions of repair parts indicating date of parts price lists and any discounts from list prices (if applicable).

18b. Terms and conditions for any other services (if applicable).

19. List of service and distribution points (if applicable).

20. List of participating dealers (if applicable).

21. Preventive maintenance (if applicable).

22a. Special attributes such as environmental attributes (e.g., recycled content, energy efficiency, and/or reduced pollutants).

22b. If applicable, indicate that Section 508 compliance information is available on Electronic and Information Technology (EIT) supplies and services and show where full details can be found (e.g. contractor’s website or other location.) The EIT standards can be found at:

www.Section508.gov/.

23. Unique Entity Identifier (UEI) number.:

QCRBZB81DFY5

24. Notification regarding registration in System for Award Management (SAM) database:

Active senseFly LLC

GSA PRICELIST

EFFECTIVE 10/01/2022

SIN

MANUFACTURE

R NAME MFR PART NO PRODUCT NAME PRODUCT DESCRIPTION UOI

DISCOUNT PRICE

OFFERED TO GSA

(including IFF) COO

334220 senseFly, Inc. SF054000 eBee TAC (without payload)

BLUE APPROVED

eBee TAC is a hand-launched fixed-wing tactical mapping drone solution that helps users in disconnected environments accurately map their surroundings from the air.

The system is delivered ready to fly in its hard transport case and offers up to 90 minutes flight time . Also including a pair of wings, 1 battery charger, 2 endurance batteries, 2 encrypted SD cards, spare pitot tubes, propeller and small accessories.

Colour: Digital camouflage for increased stealth Payload is not included EA $ 24,438.29 CH

334220 senseFly, Inc. SF540012 eBee TAC Black (without payload) BLUE APPROVED eBee TAC black is a hand-launched fixed-wing tactical mapping drone solution that helps users in disconnected environments accurately map their surroundings from the air. The system is delivered ready to fly in its hard transport case and offers up to 90 minutes flight time. Also including a pair of wings, 1 battery charger, 2 endurance batteries, 2 encrypted SD cards, spare pitot tubes, propeller and small accessories. Colour: Black Payload is not included EA $ 24,438.29 CH

334220 senseFly, Inc. SS210037 eBee TAC RTK/PPK Activation BLUE

APPROVED

RTK/PPK activation enables survey-grade absolute accuracy to your projects without the need to lay GCPs on the field. Compatible with all senseFly's sensor EA $ 5,486.15 CH

334220 senseFly, Inc. SF050005 senseFly S.O.D.A. with eBee TAC series Integration Kit

BLUE APPROVED

Product Description The senseFly S.O.D.A. is the first photogrammetry camera to be built for professional drone use and has quickly become the reference sensor in its field. It captures amazingly sharp aerial images, across light conditions, with which to produce detailed, vivid orthomosaics and ultra-accurate 3D digital surface models. S.O.D.A Specs Sensor - 1″ RGB lens - F/2.8-11, 10.6 mm (35 mm equivalent: 29 mm) RGB resolution - 5,472 x 3,648 px (3:2) Exposure compensation - ±2.0 (1/3 increments) RGB shutter - Global Shutter 1/30 – 1/2000s White balance - Auto, sunny, cloudy, shady ISO range - 125-6400 Delivered mounted on the integration kit compatible for the eBee TAC EA $ 1,795.47 CH

334220 senseFly, Inc. SF050006 senseFly S.O.D.A. Corridor with eBee TAC series Integration Kit BLUE

APPROVED

Product Description senseFly Corridor is a combined senseFly S.O.D.A./eMotion software solution that makes corridor mapping easy. With its portrait camera position, senseFly Corridor requires 30% fewer images to map the same linear route.

S.O.D.A Specs Sensor - 1″ RGB lens - F/2.8-11, 10.6 mm (35 mm equivalent: 29

mm) RGB resolution - 5,472 x 3,648 px (3:2) Exposure compensation - ±2.0 (1/3 increments) RGB shutter - Global Shutter 1/30 – 1/2000s White balance - Auto, sunny, cloudy, shady ISO range - 125-6400 Delivered mounted on the integration kit compatible for the eBee TAC EA $ 1,795.47 CH

334220 senseFly, Inc. SF050054 senseFly S.O.D.A. 3D BLUE

APPROVED

Product Description The senseFly S.O.D.A. 3D mapping camera is a unique innovation - a professional drone photogrammetry camera that changes orientation during flight to capture three images (2 oblique, 1 nadir) every time, instead of just one, for a much wider field of view. It is optimised for quick, robust image processing with Pix4Dmapper. Highlights Wide field of view for 3D mapping.

Optimised for quick, enhanced image processing with Pix4Dmapper Able to cover 1,235 ac in one flight at 400 AGL. Records the GPS position and exact orientation of camera at each capture location. Less image overlap is required for greater coverage and faster processing. S.O.D.A 3D Specs Sensor - 1″ RGB lens - F/2.8- 11, 10.6 mm (35 mm equivalent: 29 mm) RGB resolution - 5,472 x 3,648 px (3:2) Exposure compensation - ±2.0 (1/3 increments) RGB shutter - Global Shutter 1/30 – 1/2000s White balance - Auto, sunny, cloudy, shady ISO range - 125-6400 RGB FOV - Total FOV: 154°, 64° optical, 90° mechanical Delivered with the integration kit compatible for the eBee TAC EA $ 3,989.92 CH

334220 senseFly, Inc. SF050018 senseFly Aeria X with eBee TAC series Integration Kit

BLUE APPROVED

Product Description The senseFly Aeria X is a compact drone photogrammetry camera. This rugged innovation offers the perfect blend of size, weight and DSLR-like image quality. It offers stunning image detail and clarity, in virtually all light conditions, allowing you to map for more hours per day than ever before.

Highlights Optimised exposure time suits numerous light conditions, including low-light. Super sharp, rarely over-exposed images Minimal risk of noise & motion blur Records the GPS position and exact orientation of senseFly Aeria X at each capture location Less image overlap is required, enabling greater flight coverage and quicker image processing 6,000 X 4000 pixel resolution Aeria X Specs Sensor - APS-C RGB lens - F/2.8-16 18.5mm (35mm equivalent: 28 mm) RGB resolution - 6,000 x 4,000 px (3:2) Exposure compensation - ±3.0 (1/10 increments) RGB shutter - Global Shutter 1/30 – 1/4000s White balance - Auto, sunny, cloudy, shady ISO range - 100-6400 RGB FOV - 75° (diagonal) Operating temperature - -10°C – 40°C Delivered mounted on the integration kit compatible for the eBee TAC EA $ 3,989.92 CH

EFFECTIVE 10/01/2022

SIN

MANUFACTURE

R NAME MFR PART NO PRODUCT NAME PRODUCT DESCRIPTION UOI

DISCOUNT PRICE

OFFERED TO GSA

(including IFF) COO

334220 senseFly, Inc. SF050029

MicaSense RedEdge MX with eBee TAC series Integration Kit BLUE APPROVED

Product Description The RedEdge-MX is a rugged and precise multispectral camera for advanced agricultural analysis. This high-performance tool captures both the spectral bands required for crop health indices (green, red, red edge and near-infrared), a blue band for deeper insights into specific issues, plus composite RGB imagery. Highlights GSD of 8 cm or 3.1 inches per pixel Global shutter for distortion free image capture Additional light sensor for highly-accurate radiometric calibration Mounting kit required for eBee Tac that includes light sensor MicaSense RedEdge MX Specs Sensor - Five band multispectral sensor Multispectral sensor - 5-band Single-band resolution - 1.2 MP, 1,280 x 960 px (4:3) Multispectral bands - Blue (475 nm center, 20 nm bandwidth) Green (560 nm center, 20 nm bandwidth) Red (668 nm center, 10 nm bandwidth) Red edge (717 nm center, 10 nm bandwidth) Near-IR (840 nm center, 40 nm bandwidth) Single-band shutter - Global Single-band FOV HFOV: 47° VFOV: 37° DFOV: 58° Calibration - DLS 2 and Calibrated Reflectance Panel included Operating temperature - 0°C-60°C White balance - Automatic ISO range - Automatic Delivered mounted on the integration kit compatible for the eBee TAC EA $ 6,284.13 CH

334220 senseFly, Inc. SF050027 senseFly Duet T with eBee TAC series Integration Kit

BLUE APPROVED

Product Description The senseFly Duet T is a rugged dual-camera thermal mapping rig. Use it to create geo-accurate thermal maps and digital surface models quickly and easily. The Duet T includes a high-resolution thermal infrared camera (640x512

px) and a senseFly S.O.D.A. camera. Both image sources can be accessed when required, while the rig's built-in Camera Position Synchronization feature works in sync with Pix4Dmapper photogrammetry software (optional) to simplify the map reconstruction process. Duet T Highlights Dual Thermal/RGB sensor Radiometric 640 x 512 px thermal sensor GSD @ 400 ft : 6,1 in with the thermal sensor / 1,0 in with the RGB sensor Camera Position Synchronization for simplified reconstruction process Duet T Specs Sensor: Thermal infrared (FLIR) and RGB (senseFly S.O.D.A.) RGB lens: F/2.8-11, 10.6 mm (35 mm equivalent: 29 mm) Thermal lens:

F/1.25, 13 mm (35 mm equivalent: 40 mm) RGB resolution: 5,472 x 3,648 px (3:2) Thermal resolution: 640 x 512 px RGB shutter: Global Shutter 1/30 – 1/2000s White balance: Auto, sunny, cloudy, shady ISO range: 125-6400 Thermal shutter:

Rolling, 30 Hz IMU: Synchronized IMU Thermal FOV: HFOV: 45° VFOV: 37° DFOV: 56° Delivered mounted on the integration kit compatible for the eBee TAC EA $ 9,974.81 CH

334220 senseFly, Inc. SI050005 eBee TAC series Integration Kit for senseFly S.O.D.A.

BLUE APPROVED Spare part required to mount the senseFly S.O.D.A on the eBee TAC EA $ 435.90 CH

334220 senseFly, Inc. SI050006 eBee TAC series Integration Kit for senseFly S.O.D.A.

Corridor BLUE APPROVED

Spare part required to mount the senseFly S.O.D.A in a corridor configuration on the eBee TAC EA $ 435.90 CH

334220 senseFly, Inc. SI050118 eBee TAC series Integration Kit for senseFly Aeria X series BLUE APPROVED Spare part required to mount the senseFly Aeria X on the eBee TAC EA $ 435.90 CH

334220 senseFly, Inc. SI050019 eBee TAC series Integration Kit for senseFly Duet T BLUE APPROVED Spare part required to mount the senseFly Duet T on the eBee TAC EA $ 435.90 CH

334220 senseFly, Inc. SI050021 eBee TAC series Integration Kit for MicaSense RedEdge MX series BLUE APPROVED Spare part required to mount the MicaSense RedEdge MX on the eBee TAC EA $ 623.43 CH

334220 senseFly, Inc. SI050024 Calibrated Reflectance Panel + sticker BLUE APPROVED

Calibration Reflectance Panel for Micasense RedEdge MX Camera A Calibrated Reflectance Panel (CRP) enables accurate data gathering using your multispectral camera. The CRP has known reflectance values across the visible and near-infrared light spectrum. Using the CRP in conjunction with MicaSense RedEdge® and Parrot Sequoia cameras enables more accurate compensation for incident light conditions and generation of quantitative data. As a best practice, CRP images should be captured before and after each flight to provide an accurate representation of light conditions during the flight. EA $ 498.74 US

334220 senseFly, Inc. SI210010 MicaSense DLS2 BLUE

APPROVED

Light sensor for Micasense RedEdge MX camera The DLS 2 has 12 sensors oriented at different angles, allowing for better sun angle measurements. With cutting-edge technology for irradiance and sun angle measurements, it provides more accurate, reliable data, greatly reduces the need for post-processing, and substantially improves radiometric accuracy EA $ 748.11 US

334220 senseFly, Inc. SF200164 senseFly Aeria X Spare Protective Lens (pack of 3) BLUE APPROVED Spare protective lens for the senseFly Aeria X sensor Pack of 3 EA $ 179.55 CH

334220 senseFly, Inc. SF200046 senseFly S.O.D.A. spare protective lens (3 pack) BLUE APPROVED Spare protective lens for the senseFly S.O.D.A sensor Pack of 3 EA $ 110.72 CH

334220 senseFly, Inc. SF050045 eBee TAC payload bay insert kit BLUE APPROVED eBee TAC payload bay insert for senseFly Aeria X, SODA and Duet T sensor Contains 3 payload bay inserts per sensor Increase protection to the sensor and the system during the landing EA $ 159.60 CH

334220 senseFly, Inc. SF054001 eBee TAC Wing Pair BLUE APPROVED Spare Wing Pair for eBee TAC system EA $ 286.28 CH

334220 senseFly, Inc. SF200168 eBee TAC Black Wing Pair BLUE APPROVED Spare Wing Pair for eBee TAC Black system EA $ 286.28 CH

EFFECTIVE 10/01/2022

SIN

MANUFACTURE

R NAME MFR PART NO PRODUCT NAME PRODUCT DESCRIPTION UOI

DISCOUNT PRICE

OFFERED TO GSA

(including IFF) COO

334220 senseFly, Inc. MCPLA01706 eBee TAC series Battery Bay Cover BLUE APPROVED Spare Battery Bay Cover for eBee TAC system EA $ 61.84 CH

334220 senseFly, Inc. SF200169 eBee TAC series Propeller Kit (4 propellers & 20 rubber bands) BLUE APPROVED Spare Propeller Kit for eBee TAC system Includes 4 propellers and 20 rubber bands EA $ 69.82 CH

334220 senseFly, Inc. SF200174 eBee TAC series Pitot Pro Kit

BLUE APPROVED

Spare Pitot Pro Kit for eBee TAC system Includes 3 spare pitot tube and 2 pitot protection cover EA $ 219.45 CH

334220 senseFly, Inc. SF200170 eBee TAC series Pitot Kit (1 piece) BLUE APPROVED Spare Pitot Pro Kit for eBee TAC system EA $ 89.77 CH

334220 senseFly, Inc. SF054003 eBee TAC Upper Body BLUE

APPROVED

Spare Upper Body for eBee TAC system Part includes Motor Motor controller Surface controller Payload and battery connectors Required to be assemble by approved service center EA $ 1,047.36 FR

334220 senseFly, Inc. SF050028 eBee TAC Black Upper Body

BLUE APPROVED

Spare Upper Body for eBee TAC Black system Part includes Motor Motor controller Surface controller Payload and battery connectors Required to be assemble by approved service center EA $ 1,047.36 FR

334220 senseFly, Inc. SI054004 eBee TAC Lower Body BLUE

APPROVED

Spare Lower Body for eBee TAC system Required to be assemble by approved service center EA $ 558.59 CH

334220 senseFly, Inc. SI050013 eBee TAC Black Lower Body

BLUE APPROVED

Spare Lower Body for eBee TAC Black system Required to be assemble by approved service center EA $ 558.59 CH

334220 senseFly, Inc. SF050046 eBee TAC Autopilot Stack

BLUE APPROVED

Spare Autopilot Stack for eBee TAC systemc Part includes: Mainboard GNSS receiver Air radio modem IMU, Barometer Ground sensor Pitot Tube Required to be assembled by approved service center EA $ 4,987.41 CH

334220 senseFly, Inc. SF050047 eBee TAC Spare and Maintenance Kit BLUE

APPROVED

Spare and Maintenance Kit for eBee TAC system The kit includes: 1x eBee TAC Wing Pair 1x Pitot kit 1x eBee TAC vertical surface (pair) 1x Tape 1x Blower 2x Propellers 10x Rubber bands EA $ 374.06 CH

334220 senseFly, Inc. SF050048 eBee TAC vertical surfaces (pair) BLUE APPROVED Spare Propeller Kit for eBee TAC system EA $ 61.84 CH

334220 senseFly, Inc. SF050003 eBee TAC series PCB camera with holder BLUE

APPROVED

Battery Standard for eBee TAC system High voltage Lithium Polymer Battery 3700 mAh 56,24 Wh 15,2 V Allows up to 60 minutes of maximum flight time EA $ 311.21 CH

334220 senseFly, Inc. SF050017 eBee TAC series Battery Endurance BLUE

APPROVED

Battery Standard for eBee TAC system High voltage Lithium Polymer Battery 4900 mAh 74,48 Wh 15,2 V Allows up to 90 minutes of maximum flight time EA $ 435.90 CH

334220 senseFly, Inc. SI050022 senseFly SmartCharger (without cable), S65 BLUE

APPROVED

Smart Battery charger/discharger for eBee TAC system Robust and easy to use charger designed for senseFly's product 3 charge/discharge levels available: - Flight - Storage - Shipping Allows to charge 1 eBee TAC battery in 60 to 90 minutes Required a Smart Cable (model S65) to connect the battery to the charger EA $ 79.80 CH

334220 senseFly, Inc. MCCBL00061 senseFly SmartCharger eBee TAC series SmartCable (model S65) BLUE APPROVED Spare SmartCable to connect the eBee TAC batteries to the senseFly SmartCharger EA $ 24.94 CH

334220 senseFly, Inc. MCSAS00680 eBee TAC series hard carry case BLUE APPROVED

Spare ruggedized transportation hardcase for eBee TAC system Dedicated space for spares and sensors The eBee TAC hardcase will provide total protection to the equipment inside against dust, water, impacts and corrosion for chemical agents.

Specification: 7 points lock Tranport weels IP 67 STANAG standard Dimension:

internal dimension 27.16x17.71x11.81(in) external dimension 29.53x20.08x12.99(in) Weight: empty: 20.28lbs EA $ 1,496.22 IT

334220 senseFly, Inc. SF050049 eBee TAC series Backpack

BLUE APPROVED

Spare transportation backpack for eBee TAC system Light and robust, the eBee TAC backpack allows easier tranportation of the full system by one person.

Dedicated space for spares and sensor, includes a rain cover. Specifications Empty weight : 8,8 lb Dimension: 30x20x11 in EA $ 897.73 CH

334220 senseFly, Inc. MCANT00028 eBee TAC Series Ground Station Antenna (Pulse) Antenna 2.4GHz RP-SMA eBee BLUE APPROVED Spare antenna for the eBee TAC ground modem EA $ 12.97 CH

334220 senseFly, Inc. SI050010 eBee TAC Series Ground Modem BLUE APPROVED Spare ground modem for eBee TAC Need to be paired by approved service center EA $ 374.06 CH

334220 senseFly, Inc. SF200176 Secure micoSD card BLUE

APPROVED

Encrypted 32GB micro SD card for senseFly's eBee TAC sensor Encryption: AES 256 bit User authentication: configurable PIN High performance for full HD video support (UHS-I, speed class 10) Lifetime: 3.000 overwrite cycles for video recording (85 TBW @32GB) Data retention (with non-powered storage): 10 years Industrial Temp (-40…85°C) FAT32 formatted Windows 10, MacOS and Linux are supported Provided with a SD/micro SD adapter EA $ 269.32 DE

334220 senseFly, Inc.

MAPPER-OTC1-

DESKTOP

Pix4Dmapper Desktop (1-device), Perpetual license

Pix4Dmapper is the most popular image processing software in the market. The software can take .jpg or .tif files from any camera. Users can create full-color pont clouds, orthomosaics, digital surface models, 3D textured mesh, thermal maps and index maps. Once models and maps are created, you can measure surface, distance, volume and elevations. The software (given the correct inputs) can obtain 1-2 pixel GSD in the X,Y direction and 1-3 pixel GSD in the Z direction. Pix4Dmapper perpetual license EA $ 4,977.43 CH

EFFECTIVE 10/01/2022

SIN

MANUFACTURE

R NAME MFR PART NO PRODUCT NAME PRODUCT DESCRIPTION UOI

DISCOUNT PRICE

OFFERED TO GSA

(including IFF) COO

334220 senseFly, Inc. REACT-0CT Pix4Dreact - Perpetual license

The mapping software for emergency response Fast: PIX4Dreact creates 2D maps from aerial imagery in minutes. Because when every second counts, up-to-date and reliable information is of utmost importance to teams on the ground. Easy to use:

Simple and intuitive to use, even in complex and stressful situations. PIX4Dreact is developed with public safety and humanitarian aid professionals to meet their unique challenges Lightweight and robust: Lightweight enough to work on a mid-range computer in the field. PIX4Dreact doesn’t rely on an internet connection or the cloud for processing Pix4Dreact perpetual license EA $ 987.51 CH

General Terms and Conditions

1. General

1.1 Unless otherwise agreed, these General Terms and Conditions shall govern all contractually agreed services and supplies of senseFly (hereinafter called Supplier or Party).

1.2 All agreements and statements of the Parties with legal implications shall require written form in order to be valid.

2. Placement of order Acceptance of a written order shall require written confirmation thereof by the Supplier. If the contents of the order confirmation differ from the order itself, the other party than the Supplier (hereinafter called Client or Party) shall react immediately, failing which the order confirmation shall be deemed accepted.

3. Disclosure of information and secrecy

3.1 Contents of brochures, price lists, catalogues and technical documents shall, in principle, be non- ‐binding unless expressly warranted.

3.2 Each Party shall retain all rights to such plans and technical documents as it may issue to the other Party. The receiving Party shall acknowledge such rights. Without the other Party's prior written authority, the receiving Party shall not make such documents accessible, in whole or in part, to third parties nor use them other than for the purpose for which they were disclosed.

3.3 Each Party shall undertake to treat as confidential all information which belongs to the other Party and which is designated as confidential or has to be treated as confidential according to circumstances. Each Party shall undertake to treat information, which belongs to the other Party and which is not generally accessible or in the public domain as confidential. Where doubt exists, information shall be deemed confidential.

4. Prices and packing Prices include standard packaging but are exclusive of any taxes, duties, freight, insurance or other similar handling costs, except otherwise agreed in writing.

Prices are quoted on Ex Works Manufacturer facilities basis (ICC INCOTERMS ® 2010), except otherwise agreed in writing.

5. Terms of payment

5.1 If no payment terms are agreed, payments shall fall due on the invoice date and shall be payable within 30 days of invoice date to the Supplier, without deduction.

5.2 The Supplier reserves its right to request from the Client a full payment in advance.

5.3 Payment deadlines shall be met even if carriage, delivery, assembly, commissioning or acceptance of the supplied objects or services are delayed or prevented for causes for which the Supplier is not responsible, or if minor parts are missing or if slight subsequent improvements prove necessary.

6. Retention of title

6.1 The supplied items shall remain the Supplier's property until full payment of all claims arising, now or in future, from the contractual relations. The Supplier reserves (and the

Client accepts) its right to entry in the register of retentions of title.

6.2 The Client shall only dispose of or pledge the supplied items if it has completely met all payment obligations arising from the contractual relations.

7. Delivery deadlines The delivery deadline shall be deemed met if notice of dispatch has been forwarded to the Client before expiry of the deadline.

8. Dispatch and passing of risk

8.1 Each consignment shall be sent to the Client with a consignment note, quoting the relevant order number. Shipment costs shall be for the Client's account. Special requirements for dispatch, shipment and insurance shall be notified promptly to the Supplier.

8.2 Risk shall pass to the Client on readiness for dispatch.

9. Place of performance Unless special agreements have been made, the place of performance shall be the Supplier's site.

10. Acceptance The Client shall control all delivered items. Any defects shall be reported immediately, and within no more than seven (7) calendar days, failing which they shall be deemed tolerated.

11. Limited Warranty

11.1 THE SUPPLIER WARRANTS THAT THE DELIVERED ITEMS WILL BE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS FOR A PERIOD OF TWELVE (12) MONTHS

FROM THE

DATE THAT THE ITEM WAS FIRST PURCHASED BY THE CLIENT. DURING THE WARRANTY PERIOD, SHOULD THE COVERED PRODUCT, IN THE SUPPLIER'S SOLE OPINION, MALFUNCTION DUE TO ANY DEFECT IN MATERIAL AND/OR WORKMANSHIP, THE CLIENT'S SOLE REMEDY AND THE SUPPLIER'S SOLE LIABILITY SHALL BE, AT SUPPLIER'S

OPTION,

TO EITHER REPAIR OR REPLACE THE MALFUNCTIONING PRODUCT WITH A SIMILAR PRODUCT AT NO CHARGE, OR IF REPAIR OR REPLACEMENT IS NOT POSSIBLE, ISSUE

A CREDIT

NOTE; PROVIDED THAT THE MALFUNCTIONING PRODUCT IS RETURNED IN ACCORDANCE WITH THE SUPPORT AND REPAIR FORM TOGETHER WITH ALL REQUIRED FLIGHT

LOGFILES, WITH PROOF OF PURCHASE IN THE FORM OF THE CLIENT'S ORIGINAL COPY OF THE SALES RECEIPT, WITHIN THE APPLICABLE WARRANTY PERIOD.

11.2 WARRANTY DOES NOT APPLY, WITHOUT LIMITATION, IN CASE: A) THE DELIVERED ITEMS ARE NOT STORED, MAINTAINED OR USED ACCORDING TO THEIR

SPECIFICATIONS, B)

THE DELIVERED ITEMS ARE DAMAGED DUE TO CARELESSNESS, NEGLIGENCE, OR WRONG USE BY THE USER, AND C) FOR DEFECTS DUE TO NORMAL WEAR AND TEAR

INCLUDING,

BUT NOT LIMITED TO, NORMAL DEGRADATION, MISUSE, MOISTURE OR LIQUIDS, PROXIMITY OR EXPOSURE TO HEAT, ACCIDENTS, EXCESSIVE STRAIN, ABUSE, NEGLECT, MISAPPLICATION, REPAIRS OR MODIFICATIONS MADE BY THIRD PARTY OTHER THAN SENSEFLY, DAMAGE DUE TO MANUAL PILOTING IN RC (REMOTE CONTROLLED) OR

INTERACTIVE FLIGHT, DAMAGE DUE TO TAKE- ‐OFF OR LANDING LOCATION WITH OBSTACLES, DAMAGE DUE TO LOW ALTITUDE OR CLOSE OBJECT FLIGHT, DAMAGE DUE

TO

RELYING ON VISUAL OR/AND ULTRASONIC FEEDBACK AND IN MORE GENERAL ON ANY KIND OF SITUATIONAL AWARENESS ASSISTANCE, DAMAGE DUE TO USING ANY

KIND OF

FLIGHT ASSISTANCE FEATURES INCLUDING BUT NOT LIMITED TO CRUISE CONTROL, DISTANCE LOCK AND OBSTACLE AVOIDANCE, DAMAGE DUE TO LOSS OF DATA

RADIO

CONNECTION, DAMAGE DUE TO STRONG WIND, RAIN, WATER OR HUMIDITY, OR OTHER CAUSES FOR WHICH SENSEFLY IS NOT ANSWERABLE. ANY CLAIM RELATED TO IN- ‐FLIGHT MALFUNCTION OF THE PRODUCT WILL BE CONSIDERED BY SENSEFLY ONLY IF ACCOMPANIED WITH ALL RELATED FLIGHT LOGFILES. BATTERY CELLS ARE

EXCLUDED

FROM WARRANTY AFTER FIRST USE.

11.3 THE WARRANTY SHALL BE SUBJECT TO THE CONDITION THAT THE CLIENT SUBMITS THE PRODUCT, EVERY 100 HOURS OF PRODUCT FLIGHT, TO THE SUPPLIER OR

TO A

SUPPLIER- ‐AUTHORISED SERVICE CENTRE FOR A SERVICE IN ACCORDANCE WITH MAINTENANCE SCHEDULES AND SERVICE INSTRUCTIONS AVAILABLE AT CLIENT’S

ACCOUNT ON

HTTPS://MY.SENSEFLY.COM/. A SERVICE MAY BE PERFORMED IN ADVANCE PROVIDED HOWEVER THAT THE NEXT SERVICE IS PERFORMED WITHIN THE ABOVE

MENTIONED

TIME INTERVAL. IT IS THE CLIENT’S OWN RESPONSIBILITY TO MONITOR THE NUMBER AND DURATION OF FLIGHTS AND DECIDE WHEN THE MAINTENANCE CHECK MUST

BE

PERFORMED.

11.4 ANY COST IN RELATION WITH SCHEDULED MAINTENANCE AND SERVICE INSTRUCTIONS, OTHER THAN THE RETURN SHIPPING COSTS, SHALL BE BORNE BY THE

CLIENT ONLY. THE

PRODUCT IS ALWAYS SHIPPED AT CLIENT’S SOLE RISK, EVEN IN CASE OF FREE DELIVERY. THE SUPPLIER IS RESPONSIBLE FOR LOSS OR DAMAGE TO THE PRODUCT

ONLY WHEN

senseFly SA

Route de Genève 38 1033 Cheseaux-Lausanne Switzerland

VAT: CHE-115.246.272

EORI: FRCH1207617440001

Proforma Invoice:

Q2022021519301

15 February 2022

We further refer to our General Terms of Business supplied with this document (senseFly’s General Terms & Conditions).

— Company Confidential — senseFly SA, Route de Genève 38, 1033 Cheseaux-Lausanne, Switzerland - http://www.sensefly.com

Page: 3 / 4

THE PRODUCT IS IN THE SUPPLIER’S PREMISES.

11.5 THE CLIENT SHALL MAKE AVAILABLE TO THE SUPPLIER, AT THE SUPPLIER’S REQUEST, ALL DATA REGARDING THE PRODUCT’S FLIGHT AND MAINTENANCE

PARAMETERS. THE

CLIENT FURTHER AGREES AND ACKNOWLEDGES THAT THE SUPPLIER IS ENTITLED, AT ANY TIME, TO ACCESS, ANALYZE AND USE ALL DATA AVAILABLE ON THE CLIENT’S

ACCOUNT

REGARDING THE FLIGHT AND MAINTENANCE PARAMETERS. IF SUCH DATA ARE NOT AVAILABLE FOR A REASON OVER WHICH THE SUPPLIER HAS NO CONTROL OR

RESPONSIBILITY, INCLUDING BUT NOT LIMITED TO AN EXTERNAL SERVICE PROVIDER ISSUE, NETWORK FAULT OR POWER FAILURE, THE SUPPLIER IS UNDER NO

OBLIGATION TO

PROVIDE THE LIMITED WARRANTY COVERAGE UNTIL SUCH DATA IS MADE AVAILABLE.

11.6 IT IS THE CLIENT’S RESPONSIBILITY TO CHECK THAT THE PRODUCT’S AIRWORTHINESS AND LEVEL OF MAINTENANCE ARE COMPLIANT WITH APPLICABLE

REQUIREMENTS UNDER

LOCAL LAWS AND REGULATIONS. ADDITIONAL MAINTENANCE MAY BE REQUIRED BY INTERNATIONAL OR GOVERNMENTAL AUTHORITIES AND THE CLIENT SHOULD MAKE

ANY

AND ALL NECESSARY CHECKS BEFORE OPERATING THE PRODUCT.

11.7 THERE ARE NO EXPRESS OR IMPLIED WARRANTIES, REPRESENTATIONS OR CONDITIONS OTHER THAN THOSE STATED IN THIS LIMITED WARRANTY. THIS LIMITED

WARRANTY IS

MADE IN LIEU OF ALL OTHER WARRANTIES, REPRESENTATIONS OR CONDITIONS, WHETHER EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY

OR

FITNESS FOR A SPECIFIC PURPOSE.

11.8 THE REMEDY SET FORTH HEREIN SHALL BE THE SOLE, EXCLUSIVE REMEDY WITH RESPECT TO THE PRODUCT.

12. Liability

12.1 UNLESS EXPRESSLY PROVIDED OTHERWISE, SUPPLIER IS ONLY LIABLE FOR DAMAGES, WHICH WERE CAUSED WITH UNLAWFUL INTENT OR BY GROSS NEGLIGENCE.

12.2 TO THE EXTENT POSSIBLE UNDER APPLICABLE LAWS, IN NO EVENT SHALL SUPPLIER BE LIABLE TO CLIENT FOR: LOSS OF PROFIT, BUSINESS, REVENUE, GOODWILL

OR

ANTICIPATED SAVINGS; AND/OR ANY OTHER INDIRECT OR CONSEQUENTIAL LOSS OR DAMAGE.

13. Product Liability

13.1 ALL USE OF THE PRODUCT INCLUDING, BUT NOT LIMITED TO, THE USE CONFORM TO THE APPLICABLE LAW OF THE COUNTRY IN WHICH THE PRODUCT IS

OPERATED, IS UNDER

THE CLIENT’S SOLE RESPONSIBILITY. THE CLIENT SHOULD INFORM HIMSELF BEFORE USING THE PRODUCT. SOME COUNTRIES MAY HAVE LAWS THAT LIMIT THE USE OF

UNMANNED AIRCRAFTS TO “LINE- ‐OF- ‐SIGHT” OPERATIONS AND/OR PROHIBIT THE USE OF UNMANNED AIRCRAFTS IN SOME SPECIFIC AREAS.

13.2 UNDER NO CIRCUMSTANCES WILL THE SUPPLIER BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (EVEN IF THE

SUPPLIER IS

NOTIFIED OF THE POSSIBILITY OF SUCH DAMAGES) INCLUDING, BUT NOT LIMITED TO, ANY CRASH OR DAMAGES CAUSED BY THE CLIENT OR A THIRD

PARTY WHILE

OPERATING OR USING THE PRODUCT (EVEN IF CAUSED BY A MALFUNCTION OF THE PRODUCT), ANY LOSS OF REVENUE, LOSS OF PROFIT, OR LOSS OF DATA WHETHER

BASED

UPON ANY ALLEGED BREACH OF WARRANTY, REPRESENTATION OR CONDITION, CONTRACT, OR ANY OTHER CONDUCT INCLUDING NEGLIGENCE (INTENTIONAL

OR

OTHERWISE), GIVING RISE TO SUCH CLAIM.

13.3 UNDER NO CIRCUMSTANCES WILL THE SUPPLIER BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (EVEN IF THE

SUPPLIER IS

NOTIFIED OF THE POSSIBILITY OF SUCH DAMAGES) INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES CAUSED BY FAILURE OF THE AUTOPILOT, ELECTRONICS OR

SOFTWARE.

THE CLIENT SHALL NOT OPERATE THE PRODUCT IN AREAS OR UNDER CIRCUMSTANCES WHERE A FAILURE COULD CAUSE DAMAGES OR/AND HARM TO PEOPLE, PROPERTY

OR/AND ANIMALS.

14. Subsequent improvement and supply of substitutes In case of supplies or services which are not conform to the order, the Supplier reserves the right, at its discretion, to remedy them by subsequent improvement, repair or supply of substitutes.

15. Rights Rights to developments, inventions, production processes and other intellectual property rights to the contractual items shall vest in the Supplier.

16. Approvals If provision of a contractual service requires official approval from the Swiss Government (namely an export permit), the Supplier shall make all necessary and reasonable arrangements to obtain it. The Client shall lend support where required. If such approval is granted late, or not at all, or is revoked once granted, the Client shall derive no claim on such grounds against the Supplier.

17. Applicable law and jurisdiction

17.1 These terms will be governed by and construed in accordance with the laws of Switzerland without regard to its conflicts of law provisions.

17.2 The ordinary courts at the Supplier's place of business shall be competent for disputes arising from, or in connection with, this contract.

senseFly SA

Route de Genève 38 1033 Cheseaux-Lausanne Switzerland

VAT: CHE-115.246.272

EORI: FRCH1207617440001

Proforma Invoice:

Q2022021519301

15 February 2022

We further refer to our General Terms of Business supplied with this document (senseFly’s General Terms & Conditions).

— Company Confidential — senseFly SA, Route de Genève 38, 1033 Cheseaux-Lausanne, Switzerland - http://www.sensefly.com

Page: 4 / 4