MAS - Strategic Operations, Inc. - 47QSWA23D0026

General Services Administration Federal Supply Service Authorized Federal Supply Schedule Price List

Multiple Award Schedule FSC Group: Security and Protection, Facilities

Contract Number: 47QSWA23D0026 Contract Period: December 21, 2022 through December 20, 2027

Price List Current Through Mod PA-0009, Effective January 14, 2026 Prices Shown Herein are Net (discount deducted)

Contractor Information:

Strategic Operations, Inc.

4705 Ruffin Road, San Diego, CA, 92123 Point of Contact: Gil Penserga Telephone: (619) 571-6387 e-mail: gilpenserga@e-stops.com Website: www.strategic-operations.com

Business Type: Small Business

For more information on ordering from Federal Supply Schedules go to the GSA Schedules page at GSA.gov. On-line access to contract ordering information, terms and conditions, up-to-date pricing, and the option to create an electronic delivery order are available through GSA Advantage!®, a menu-driven database system. The INTERNET address GSA Advantage!® is: GSAAdvantage.gov.

CUSTOMER INFORMATION:

1b. Identification of the lowest priced model number and lowest unit price for that model for each special item number awarded in the contract. See GSA Pricing

1c. If the Contractor is proposing hourly rates a description of all corresponding commercial job titles, experience, functional responsibility and education for those types of employees or subcontractors who will perform services shall be provided. See GSA Pricing

2. Maximum Order: 611430ST: $1,000,000.00, 332311P: $250,000

3. Minimum Order: None

4. Geographic Coverage (delivery Area): Worldwide

5. Point(s) of production (city, county, and state or foreign country): San Diego, CA

6. Discount from list prices or statement of net price: Government Net Prices (discounts already deducted). See GSA Pricing

7. Quantity discounts: None Offered

8. Prompt payment terms: Net 30 days. Information for Ordering Offices: Prompt payment terms cannot be negotiated out of the contractual agreement in exchange for other concessions.

9. Foreign items (list items by country of origin): None

10a. Time of Delivery (Contractor insert number of days): 45 Days ARO

10b. Expedited Delivery: 30 Days ARO may be available. Customer may contact Contractor for rates.

10c. Overnight and 2-day delivery: Not available

10d. Urgent Requirements: Contact Contractor

11. F.O.B Points(s): Origin

12a. Ordering Address: Same as Contractor

12b. Ordering procedures: For supplies and services, the ordering procedures, information on Blanket Purchase Agreements (BPA’s) are found in Federal Acquisition Regulation (FAR) 8.405-3.

13. Payment address: Same as Contractor

14. Warranty provision: Standard Commercial Warranty

15. Export Packing Charges (if applicable): N/A

16. Terms and conditions of rental, maintenance, and repair (if applicable): N/A

17. Terms and conditions of installation (if applicable): N/A

18a. Terms and conditions of repair parts indicating date of parts price lists and any discounts from list prices (if applicable): N/A

18b. Terms and conditions for any other services (if applicable): N/A

19. List of service and distribution points (if applicable): N/A

20. List of participating dealers (if applicable): N/A

21. Preventive maintenance (if applicable): N/A

22a. Special attributes such as environmental attributes, (e.g., recycled content, energy efficiency, and/or reduced pollutants): N/A

22b. If applicable, indicate that Section 508 compliance information is available on Electronic and Information Technology (EIT) supplies and services and show where full details can be found (e.g. contactor’s website or other location.) The EIT standards can be found at: www.Section508.gov/. N/A

23. Unique Entity Identifier (UEI) number: FXHENJSKKDH3

24. Notification regarding registration in System for Award Management (SAM) database: Contractor is registered and active in SAM.gov.

GSA PRODUCT PRICING:

GSA DESCRIPTIONS:

Tactical Training Laboratory The Strategic Operations, Inc. (STOPS) training facility, also known as the Tactical Training Lab (TTL), is a training/simulation area unlike any other. STOPS fills the void of realistic training for tactical teams of law enforcement, military, and other professional organizations responsible for public safety. Managed and operated by highly trained tactical operators, STOPS knows and understands the needs of both military and public safety professionals. Utilizing a support staff trained to re-create any tactical scenario in the greatest of detail; the physical and sensory environment is both controlled, manipulated, and influenced – creating a Hyper-Realistic® training experience.

The training areas are designed and constructed specifically for tactical (realistic) training by seasoned designers, with input of public safety professionals. The environments utilize Special Effects Experts who can control lighting, smoke, and sound – producing the most believable scenarios. Professional Role Players and Special Effects Make-up Artists heighten the experience – creating a training environment that is unmatched in the industry.

STOPS personnel are the innovators of real-life tactical training environments and have created world class training venues. Residences, offices, markets, and classrooms are housed within an intricately designed facility, enabling multiple units to train in the various areas simultaneously. Rooms are furnished and floor plans are changeable; resulting in the most accurate, immersible, believable, and beneficial tactical movement training possible.

All facilities are approved to use blanks, Simunitions®, or any type of non-lethal round.

Custom scenarios can be developed and custom sets can be constructed. STOPS can provide the “opposing force” for exercises – men and women who are fully trained, armed, and dressed in appropriate wardrobe to match the mission specific scenario – freeing all personnel in the unit to participate in the training evolution. Role Players can replicate indigenous people and their customs or casualties from any type of traumatic event.

Role Players add a convincing and haunting reality to each training experience, regardless of the venue. They take the training experience to another level – one in which military and law enforcement teams are faced with circumstances/challenges not available in any other training.

Special effects can include smoke, noise, and explosions that add the highest level of realism safely and simulate the “fog of war” or a traumatic event. Special Effects Make-up Artists can simulate combat and/or traumatic wounds, adding a heightened sense of realism to any training.

Bunkhouse – an area fashioned after the military squad bay, as well as an outdoor shower trailer, is available to units remaining at the facility overnight. Bunkroom sleeps up to 42.

Below is a list of the capabilities provided in the TTL:

Military Operations on Urban Terrain (MOUT) Village - is an outdoor training replicating a Third World Village. The MOUT Village contains multiple single- and two-story buildings.

· crashed helo and upright & overturned vehicles

Operational Training Building (ShootHouse) - The ShootHouse has four levels – each with multiple rooms and hallways and “hides” throughout. There are internal stairways and an external stairway. Many possible room clearing scenarios.

· Four levels of situational training spaces replicating multiple domestic areas, a school area, and breachable doors.

Medical Spaces Training Area - The Medical Spaces consist of a reception area, an Emergency Room (ER), an Intensive Care Unit (ICU), and an Operating Room (OR). The reception area can replicate a Navy ship at sea or a medical facility on land.

Medical Spaces feature the highest fidelity possible for training emergency or routing operations in a medical facility; with five (5) modern hospital beds and two (2) trauma resuscitation suites which may also be utilized as ORs or ICUs. A video transmission system allows instructors or interested individuals to log-in remotely to view training operations. The system can record training operations for real-time feedback and/or after-action review. A catwalk above the training area allows for staff and students to observe operations without interference.

* Medical Spaces are only authorized for specific Medical Training Operations.

Simulated Navy Ship Spaces Training Area - The simulated Navy Ship Training Area is connected to the Emergency Room via a “ship’s hatch” and replicates medical spaces, berthing area, a galley, and a control room.

Rappel Tower w/ helicopter platform - 60-foot fast rope/rappelling tower, six-story, multi-level with balconies, access windows; UH-1H “Huey” helicopter body with four fast rope positions, simulating various types of helicopters, which can “hover” from 60 feet down to the deck of the Merchant Marine Ship Trainer.

Each of the six floors can replicate any type of setting required by the scenario - an office, an apartment, etc. - each presenting unique tactical challenge for assaults, hostage rescues, or other scenarios.

Merchant Marine Ship Trainer - provides facilities to train in visit, board, search, and seizure (VBSS) techniques under realistic conditions. The facility replicates the types of ships, conditions, and scenarios encountered in drug interdiction and anti-terrorist operations.

The Site includes: a Ship Simulator with multiple levels, decks, hatches, and ladders (accessible by hatch, ladder, caving ladder, and rappelling); eight separate areas with numerous compartments; a bridge; Captain’s quarters; communications room; galley; crew berthing area; engine room; engineering spaces; cargo holds.

A UH-1H “Huey” helicopter body with four fast rope positions to simulate various types of helicopters, co-located with Ship Simulator to enable ship boarding from a helicopter that can “hover” from 60 feet down to the deck.

Special effects and additional features include: hidden compartments; flooding of engine room; non-toxic “movie” smoke; heat; sparks; lighting effects; an operating diesel engine.

Classrooms - multiple classrooms are available with seating for ten to sixty individuals. Classrooms will contain tables, chairs, and a white board and can be configured with computer and projection system. A use of a classroom is included in a facility rental.

Situational Training Exercise Lanes - multiple training lanes replicate scenarios where casualty care is required – possibly under fire or in a reduced visibility environment.

GETFO

“Get-Forces off-and-on-fast” (GETFO) Rapid Egress System (Marine Corps version Mod 2) for a 7-ton MAS-equipped MTVR truck

STRATEGIC OPERATIONS provides the military with cutting edge, next generation, live-training simulations and facilities unique in the training arena.

Thousands of Marines have trained at Strategic Operations prior to deployment to OEF and OIF during which many lessons learned have been incorporated into the design of facilities and equipment.

This fertile ground has also contributed to innovative research and development and rapid prototyping. One product of this effort - the GETFO – resulted from watching the difficulties Marines sometimes have in rapidly mounting and dismounting from 7-ton trucks.

The small ladder attached to the tailgate of a 7-ton truck is the only way to safely get in and out of the back of the vehicle. When troops carrying 80-100 pounds of combat gear need to dismount in a firefight they either have to use the ladder or jump almost six feet to the ground, all too often injuring an ankle or leg. *

Strategic Operations designed a solution to innovatively allow troops quick injury-free egress from the back of a 7-ton truck and to re-enter the bed of the truck quicker and safer than standard methods, all the while maintaining their situational awareness.

Using a technique similar to “fast-roping,” the GETFO system allows troops to slide down a pole – decelerating – and controlling their rate of descent until safely on the ground.

The GETFO is a simple system easily retrofitted in the field with two hand tools within 20 minutes.

The GETFO is adaptable – other versions can be retrofitted to various models of military and commercial vehicles.

Marine Corps MTVR with MAS

The Marine Corps requires the ability to rapidly ingress/egress fully loaded infantry combat Marines from the cargo bed of a Medium Tactical Vehicle Replacement (MTVR) retrofitted with Marine Armor System (MAS). MTVRs, which are in direct support of infantry operations, require a rapid, safe, and efficient manner to load/unload Marines carrying a full combat load. This system will be provided to MTVRs deployed in Iraq and specifically being utilized with motorized infantry.

To reduce operational risk and unnecessary injury risk to infantry Marines, the Marines need a kit that will allow a rapid exit and entrance to the MAS MTVR during combat operations and training. Constraints of the current MAS on the MTVR have made it difficult for rapid egress from the rear troop compartment. Strategic Operations developed a kit that aids in rapid egress deployment from the bed of the MAS MTVR. This kit attaches to MAS MTVRs without interfering, weakening, damaging, or decreasing armor protection. This system is be able to withstand repeated ingress/egress activity of combat loaded Marines simultaneously while allowing the occupants to exit the MTVR within three minutes. The Rapid Egress System is a bolt on/removable system weighing approximately 311 pounds.

SECURITY (COMPOUND) WALLS

Strategic Operations manufactures a variety of appurtenances including walls, gates, and tunnels systems. Security (compound) wall components are made of composite materials over steel frames and can replicate the look of brick, masonry, adobe, or any material or construction technique.

Components are portable, scalable, easily assembled, and rugged. The walls can be scaled, the gates can be breached, and the surfaces can withstand weather, and training wear and tear.

The walls of the compound depicted in the photo above is comprised of corner pieces, 6 foot high wall sections, gate columns, and vehicle gate. This compound incorporates RHUs as part of the wall system.

The following picture depicts a compound comprised of 10 foot high walls, vehicle and pedestrian gates. It also shows the RHU completely inside the walls.

These wall systems can be made with “spider holes,” sections of walls that can be explosively breached in simulations using pyrotechnic special effects. The wall systems can be made into tunnel complexes, and connected to bunkers, structures, or could contain hidden caches. The wall system components are very cost effective alternatives to permanently constructed walls, and they can be moved, re-configured, and easily re-decorated to achieve a look that can replicate any geographical area of the world.

Each wall section is approximately 8 feet long. The base of the section is approximatley 30 inches wide and about 12 inches at the top. This angular section provides stability without the need for concrete footers. The tops of the walls are reinforced to allow the use of tools or other climbing gear commonly used to scale the walls. The interior frames are made of steel. In the above picture the compound wall is tailored to contain a mult-story RHU.

We are also able to provide 8 or 12 foot high walls.

Walls are available in the same textures used for the RHUs.

6 FT COMPOUND WALL

VEHICLE GATE

VEHICLE and PEDESTRIAN GATE

BARRIERS

JERSEY BARRIERS

ALASKA BARRIERS

The barriers are constructed of composite foam material and come as two pieces. The pieces are the angular base and the upright portion. When assembled the barriers are 10 ft high, 4 ft wide and 6 inches thick. Utilizing a tongue and groove interlocking system the barriers are designed to replicate a typical concrete barrier. The angular base is 3 ft high and 3 ft wide. At least 2 ft of the upright portion will slide into the angular base. The barriers weigh less than 100 pounds and can be moved/carried by two people.

PARAPET

STOPS rates are for Continental United States (CONUS) efforts only. For outside CONUS efforts STOPS rates will be increased to include Department of State required differentials. Other related international expenses required to support employees outside of the CONUS, like travel and per diem, will also be included. Outside CONUS efforts will be negotiated specifically with ordering activities on an individual task order basis.

Contact Strategic Operations for custom quotes.

Re-Locatable Habitat Units (RHU)

The RHU has several advantages over other types of structures (such as ISO shipping containers or wooden structures) that might be used. The major advantages include:

· Our RHUs are able to be configured to any size, shape or façade to match the surroundings or area where they will be assembled. Our RHUs can be textured to blend in with the geographical area.

· Built to last over time and withstand the harshest of conditions and environments. Materials and construction provide all-weather, long-lasting structures suitable for year-round training.

· Modular, scalable, and easily transportable. RHUs are placed in the most remote locations and not dependent upon delivery with a semi-truck or lifting equipment.

· Our RHU is assembled and disassembled with one tool. We are adept at training personnel to assemble and disassemble and will provided hands-on training. We will also provide an assembly manual and a video.

· All of the four foot x eight foot panels are easily stacked on a pallet for transportation to other sites and/or locations.

· The panels weigh less than 100 pounds and are easily carried by two people.

· The training aids come with adjustable legs to accommodate uneven ground.

· Various sized RHU options, as well as custom sized options, are available. Contact STOPS for more detailed information. All RHUs are provided with interior set dressing

The photos depict façades typical in many areas of the world.

RHU Village Samples

RHU – Various Size Samples

12x16 RHU

12x32 L-Shape RHU

8x16 Two-Story L-Shape RHU with Parapet

12x32 with 12x24 RHU with Parapet

Multi-Size RHU with Parapet and Drive-Thru

Multi-Size RHU with Parapet and Exterior Stairs

12x32 with 12x16 RHU in Middle

16x24 with 8x24

32x32 with 24x32 RHU

Round RHU

RHU – Interior Set Dressing (Props) Samples

Medical Clinic

Office

Armory

Restaurant

Sleeping Area

Eating Area

RHU – Texture Samples

Various

We can emulate most worldwide textures to include:

1. Concrete Masonry Unit (CMU)

2. Adobe

3. Brick

4. Stone

5. Stucco

6. Pockmark

Combination Patterns: The above can also be combined on a panel: Example: CMU and Adobe

1. Blownout Adobe

2. Blownout Brick

3. Blownout Stone

4. Blownout CMU

RHU Descriptions Model A: flat roof, flat sides, sand type finish Model B: flat roof, flat sides, textured finish Model C: flat roof, flat sides, textured finish with combination

Note: The prices above are based on FOB San Diego and do not include assembly and installation. If assembly is desired, it would be added to the order separately and quoted using established GSA labor rates. Travel costs would be per the Joint Travel Regulations.

LABOR CATEGORIES FOR SERVICES AND TRAINING

Camera Operator: The person who operates the camera and is responsible to the Principal for composition, focus, camera movement, and anything that comes within the domain of photography in order to record the training activity. The position requires specialized training to make appropriate use of the technical equipment and at least three (3) years of professional experience in a related field.

Construction Labor I – Assists Construction Labor II and III in the construction of the set or any scenery or environment built indoors or outdoors for use in a scenario. The person responsible for the availability, maintenance, and placement of all props and buildings on the set and requires at least one (1) year of professional experience in a related field.

Construction Labor II – The person responsible for constructing the set or any scenery or environment built indoors or outdoors for use in a scenario. This position requires at least three (3) years of professional experience in a related field.

Construction Labor III – The person responsible for managing/supervising the construction of the set or any scenery or environment built indoors or outdoors for use in a scenario, including supervision of Construction Labor I and II personnel. May also have specialized skill set needed for completion of the project. This position requires at least five (5) years of professional experience in a related field.

Driver – The person responsible for the transportation of role players, crew, and equipment from the various locations and sets used in scenarios. This position requires at least one (1) year of professional experience in a related field and a valid driver’s license and clean driving record.

Editor – The person who edits film taken by the camera operator. The editor works with the principal to build a package from the raw tape sent in from the training.

Facilities Manager – The person responsible for overseeing and conducting the maintenance of the facilities used for training and Gate Security. Individual may also act in the Shipping and Receiving role.

Instructor I - This person possesses one (1) year of documented experience in a field directly related to the training. This position may be used for Subject Matter Experts or role player/facility usage coordination.

Instructor II (Assistant Project Manager) – In addition to the Instructor I requirements, the Instructor II has in-depth knowledge and at least three (3) years of experience in a field directly related to the training. This position may be utilized for assistant project managers, subject matter experts, or weapons handlers.

Instructor III (Project Manager) – In addition to the qualifications of Instructor II, this person possesses an advanced knowledge or at least five (5) years of professional experience in a field directly related to the training. This position may also be utilized for project managers, assistant project managers, weapons handlers, and may oversee Cut Suit Subject Matter Experts. The individual will be responsible for planning and coordinating the training exercise based on the unit training schedule and operational requirements. This person identifies the role-player and instruction support, the special effects, vehicles, and locations to be used. The position advises the unit trainers in the best methods to coordinate the special effects and role-players into scenarios to achieve the training objectives.

Key Principal – A senior corporate manager responsible for the management, direction, and operation of major aspects of the business. This position provides executive-level guidance and direction to single and multiple program areas, manages complex organizations and teams by integrating skills into client-focused, results-oriented solutions. Requires 12 or more years of professional experience in a related field, or a bachelor’s degree in a related field and 10 or more years of professional experience in a related field, or a master’s degree and 8 (eight) or more years of professional experience in a related field, or a Ph.D. degree in a related field and 6 (six) or more years of professional experience in a related field.

Principal II (Program Manager) – A senior corporate manager responsible for analyzing, planning, directing, and coordinating activities of designated projects and organizations within the business. This position ensures the goals and objectives of programs/projects and organizations are accomplished within prescribed time frames and budgets. Requires 10 or more years of professional experience in a related field, or a bachelor’s degree in a related field and 8 (eight) or more years of professional experience in a related field, or a master’s degree and 7 (seven) or more years of professional experience in a related field, or a Ph.D. degree in a related field and 4 (four) or more years of professional experience in a related field.

Principal I (Program Manager) – A senior corporate manager responsible for analyzing, planning, directing, and coordinating activities of designated projects and organizations within the business. This position ensures the goals and objectives of programs/projects and organizations are accomplished within prescribed time frames and budgets. Requires 8 (eight) or more years of professional experience in a related field, or a bachelor’s degree in a related field and 6 (six) or more years of professional experience in a related field, or a master’s degree and 4 (four) or more years of professional experience in a related field, or a Ph.D. degree in a related field and 3 (three) or more years of professional experience in a related field.

Role Player – Possesses the acting ability to deliver a performance that has continuity in emotion, energy, speed, and reality appropriate to the scenario. The position requires knowledge of weapons and tactics, and the skills to simulate law enforcement and military tactics. The position requires at least three (3) years of professional experience in a related field and the individual may or may not have a Foreign Language Skill (FLS).

Role Player (Amputee) – In addition to the Role Player requirements individual is missing at least one limb.

Role Player Category II – Meets the requirements of a Role Player and possesses a secret clearance.

Role Player Coordinator – In addition to Role Player requirements, is responsible for management of Role Players while in the performance of contractual requirements.

Special Effects I – Assists Makeup and Pyrotechnic Special Effects Artists. The position requires at least one (1) year of professional experience in a related field.

Special Effects II – Makeup and Pyrotechnic Special Effects Artists are responsible for many special effects such as realistic wounds, simulated explosions (buildings/vehicles), bullet hits, fires, and more that are used in all types of scenarios. The position requires at least three (3) years of professional experience in a related field and serves as the Supervisor for Special Effects I personnel.

Special Effects III – The person responsible for layout and design of the various special effects used, and supervision and coordination of Special Effects I and II personnel. The position is responsible for assembly and management of explosive devices and firearms, sound effects, or make-up special effects. The position requires at least five (5) years of professional experience in a related field and is considered a technician.

Wardrobe Labor – The person in charge of designing and assembling costumes and clothing to accurately depict the customs and time periods for the scenario being portrayed. The position requires at least one (1) year of professional experience in a theatrical or related field.

47QSWA23D0026 Strategic Operations, Inc. Page 1 image3.jpeg image4.jpeg image5.jpeg image6.jpeg image7.jpeg image8.jpeg image9.jpeg image10.jpeg image11.jpeg image12.jpeg image13.jpeg image14.jpeg image15.jpeg image16.jpeg image17.jpeg image18.jpeg image19.jpeg image20.jpeg image21.png image22.jpeg image23.png image24.png image25.png image26.png image27.png image28.png image29.png image30.jpeg image31.png image32.png image33.png image34.png image35.png image36.png image29.jpeg image31.jpeg image32.jpeg image33.jpeg image34.jpeg image35.jpeg image37.png image38.jpeg image39.jpeg image40.jpeg image41.jpeg image42.jpeg image43.jpeg image44.jpeg image45.jpeg image46.jpeg image47.jpeg image48.jpeg image49.jpeg image50.jpeg image51.jpeg image52.jpeg image53.jpeg image54.jpeg image55.jpeg image56.jpeg image57.jpeg image58.jpeg image1.jpeg image2.jpeg image59.png