MAS - CPM Enterprises LLC - 47QSMS24D003P

AUTHORIZED

INFORMATION TECHNOLOGY SCHEDULE PRICELIST

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY

EQUIPMENT, SOFTWARE AND SERVICES

MULTIPLE AWARD SCHEDULE (MAS)

SINS 54151S

Note 1: All non-professional labor categories must be incidental to and used solely to support hardware, software and/or professional services, and cannot be purchased separately.

Note 2: Offerors and Agencies are advised this is not a means to procure services which properly fall under the Brooks Act. These services include, but are not limited to, architectural, engineering, mapping, cartographic production, remote sensing, geographic information systems, and related services. FAR 36.6 distinguishes between mapping services of an A/E nature and mapping services which are not connected nor incidental to the traditionally accepted A/E

Services.

Note 3: This solicitation is not intended to solicit for the reselling of Professional

Services, except for the provision of implementation, maintenance, integration, or training services in direct support of a product. Under such circumstances the services must be performance by the publisher or manufacturer or one of their authorized agents.

CPM Enterprises, LLC

306 South Paul Laurence Dunbar Street

Dayton, Ohio 45402

937.427-0333 www.cpment.com

Contract Number: 47QSMS24D003P

Period Covered by Contract: February 26th 2024 through February 25th , 2029

General Services Administration

Federal Acquisition Service

Products and ordering information in this Authorized Information Technology Schedule Pricelist are also available on the GSA Advantage! System (http://www.gsaadvantage.gov).

Contents

SECTION A

INFORMATION TO ORDERING OFFICES

INFORMATION FOR ORDERING ACTIVITIES APPLICABLE TO ALL SPECIAL ITEM

NUMBERS

1. GEOGRAPHIC SCOPE OF CONTRACT:

2. CONTRACTOR’S ORDERING ADDRESS AND PAYMENT INFORMATION: .. 6

3. LIABILITY FOR INJURY OR DAMAGE

4. STATISTICAL DATA FOR GOVERNMENT ORDERING OFFICE

COMPLETION OF STANDARD FORM 279:

5. FOB DESTINATION

6. DELIVERY SCHEDULE

7. DISCOUNTS

8. TRADE AGREEMENTS ACT OF 1979, as amended:

9. STATEMENT CONCERNING AVAILABILITY OF EXPORT PACKING:

10. SMALL REQUIREMENTS:

11. MAXIMUM ORDER (All dollar amounts are exclusive of any discount for prompt payment.)

12. ORDERING PROCEDURES FOR FEDERAL SUPPLY SCHEDULE

CONTRACTS

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION

STANDARDS REQUIREMENTS:

14. CONTRACTOR TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2003) 9

15. CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES:

16. GSA ADVANTAGE!

17. PURCHASE OF OPEN MARKET ITEMS

18. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

19. OVERSEAS ACTIVITIES

20. BLANKET PURCHASE AGREEMENTS (BPAs)

21. CONTRACTOR TEAM ARRANGEMENTS

22.INSTALLATION, DEINSTALLATION, REINSTALLATION

23. SECTION 508 COMPLIANCE

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES.

26. SOFTWARE INTEROPERABILITY

27. ADVANCE PAYMENTS

SECTION B

TERMS AND CONDITIONS

TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT)

PROFESSIONAL SERVICES (SPECIAL ITEM NUMBER 132-51)

1. SCOPE

2. PERFORMANCE INCENTIVES I-FSS-60 Performance Incentives (April 2000) .. 16

3. ORDER

4. PERFORMANCE OF SERVICES

5. STOP-WORK ORDER (FAR 52.242-15) (AUG 1989)

6. INSPECTION OF SERVICES

7. RESPONSIBILITIES OF THE CONTRACTOR

8. RESPONSIBILITIES OF THE ORDERING ACTIVITY

9. INDEPENDENT CONTRACTOR

10. ORGANIZATIONAL CONFLICTS OF INTEREST

11. INVOICES

12. PAYMENTS

13. RESUMES

14. INCIDENTAL SUPPORT COSTS

15. APPROVAL OF SUBCONTRACTS

USA COMMITMENT TO PROMOTE SMALL BUSINESS PARTICIPATION

PROCUREMENT PROGRAMS

BEST VALUE BLANKET PURCHASE AGREEMENT FEDERAL SUPPLY SCHEDULE .. 21

(CUSTOMER NAME) BLANKET PURCHASE AGREEMENT

BASIC GUIDELINES FOR USING “CONTRACTOR TEAM ARRANGEMENTS”

SECTION C

LABOR SERVICE DESCRIPTIONS

FPDS Code D301 IT Facility Operation and Maintenance

SECTION D

LABOR CATEGORY DESCRIPTIONS

CPM Enterprises, LLC

Labor Category Descriptions

SECTION E

GSA RATES

CPM Enterprises, LLC

GSA Rates

SECTION A

INFORMATION TO ORDERING OFFICES

C:\Users\melissa.shaw\Documents\CPM\CPM

MAS Contract\47QSMS24D003PCPM.docx Last Update Date: 2024-03-01

Page

INFORMATION FOR ORDERING ACTIVITIES

APPLICABLE TO ALL SPECIAL ITEM NUMBERS

SPECIAL NOTICE TO AGENCIES: Small Business Participation

SBA strongly supports the participation of small business concerns in the Federal Acquisition Service.

To enhance Small Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.

For orders exceeding the micropurchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage! on-line shopping service (www.gsaadvantage.gov). The catalogs/pricelists, GSA Advantage! and the Federal Acquisition Service Home Page (www.gsa.gov/fas) contain information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micropurchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.

1. GEOGRAPHIC SCOPE OF CONTRACT:

Domestic delivery is delivery within the 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC, and U.S. Territories. Domestic delivery also includes a port or consolidation point, within the aforementioned areas, for orders received from overseas activities.

Overseas delivery is delivery to points outside of the 48 contiguous states, Washington, DC, Alaska, Hawaii, Puerto Rico, and U.S. Territories.

Offerors are requested to check one of the following boxes:

[X] The Geographic Scope of Contract will be domestic and overseas delivery.

[ ] The Geographic Scope of Contract will be overseas delivery only.

[ ] The Geographic Scope of Contract will be domestic delivery only.

2. CONTRACTOR’S ORDERING ADDRESS AND PAYMENT INFORMATION:

306 South Paul Laurence Dunbar Street, Dayton, Ohio 454502

CPM Enterprises, LLC will accept the credit card for payments equal to or less than the micro-purchase for oral or written orders under this contract. The Contractor and the ordering agency may agree to use the credit card for dollar amounts over the micro-purchase threshold (See GSAR 552.232-79 Payment by Credit Card). In addition, bank account information for wire transfer payments will be shown on the invoice.

Last Update Date: 2024-03-01

The following telephone number(s) can be used by ordering activities to obtain technical and/or ordering assistance: 937.427.0777

3. LIABILITY FOR INJURY OR DAMAGE

The Contractor shall not be liable for any injury to ordering activity personnel or damage to ordering activity property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.

4. STATISTICAL DATA FOR GOVERNMENT ORDERING OFFICE COMPLETION OF

STANDARD FORM 279:

Block 9: G. Order/Modification Under Federal Schedule

Block 16: Unique Entity Identifier: LLX9EMLK9JH3

Block 30: Type of Contractor

B. Small Disadvantaged Business

C. 8(a)

D. HUBZone

Block 31: Woman-Owned Small Business - No

Block 36: Contractor's Taxpayer Identification Number (TIN): 01-0909162

4a. CAGE Code: 7LH55

4b. Contractor has registered with the SAM Database.

5. FOB DESTINATION

6. DELIVERY SCHEDULE

a. TIME OF DELIVERY: The Contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as set forth below:

SPECIAL ITEM NUMBER DELIVERY TIME (Days ARO)

132-51 As Negotiated between CPM Enterprises, LLC and the ordering activity.

b. URGENT REQUIREMENTS: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering activity, ordering activities are encouraged, if time permits, to contact the Contractor for the purpose of obtaining accelerated delivery.

The Contractor shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery time acceptable to the ordering activity, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

Last Update Date: 2024-03-01

7. DISCOUNTS: Prices shown are NET Prices; Basic Discounts have been deducted.

a. Prompt Payment: _0_% 30 days from receipt of invoice or date of acceptance, whichever is later.

b. Quantity - None Dollar Volume – 2% for orders exceeding $400,000.00

c. Government Educational Institutions - Government Educational Institutions are offered the same discounts as all other Government customers.

d. Other

8. TRADE AGREEMENTS ACT OF 1979, as amended:

All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of

1979, as amended.

9. STATEMENT CONCERNING AVAILABILITY OF EXPORT PACKING:

Outside the scope of the contract.

10. SMALL REQUIREMENTS:

The minimum dollar value of orders to be issued is $1000.

11. MAXIMUM ORDER (All dollar amounts are exclusive of any discount for prompt payment.)

a. The Maximum Order value for the following Special Item Numbers (SINs) is $500,000:

12. ORDERING PROCEDURES FOR FEDERAL SUPPLY SCHEDULE CONTRACTS

Ordering activities shall use the ordering procedures of Federal Acquisition Regulation (FAR) 8.405 when placing an order or establishing a BPA for supplies or services. These procedures apply to all schedules.

a. FAR 8.405-1 Ordering procedures for supplies, and services not requiring a statement of work.

b. FAR 8.405-2 Ordering procedures for services requiring a statement of work.

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS

REQUIREMENTS:

Last Update Date: 2024-03-01

Ordering activities acquiring products from this Schedule must comply with the provisions of the

Federal Standards Program, as appropriate (reference: NIST Federal Standards Index). Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing

Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering activities, shall be responded to promptly by the Contractor.

13.1 FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS

PUBS): Information Technology products under this Schedule that do not conform to Federal

Information Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication." Federal Information Processing Standards

Publications (FIPS PUBS) are issued by the U.S. Department of Commerce, National Institute of

Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service

(NTIS), 5285 Port Royal Road, Springfield, Virginia 22161.

FIPS PUBS include voluntary standards when these are adopted for Federal use. Individual orders for

FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487-

4650.

13.2 FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS): Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED-

STDS) should not be acquired unless a waiver has been granted in accordance with the applicable

"FED-STD." Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Ordering information and information concerning the availability of FED-STDS should be obtained from the

GSA, Federal Acquisition Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619-8925. Please include a self-addressed mailing label when requesting information by mail.

Information concerning their applicability can be obtained by writing or calling the U.S. Department of

Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301)975-2833.

14. CONTRACTOR TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2003)

(a) Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract. All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the

Multiple Award Schedule.

(b) Travel: The Contractor may be required to travel in performance of orders issued under this contract. Allowable travel and per diem charges are governed by Pub.L. 99-234 and FAR Part 31, and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the Multiple Award Schedule. Travel in performance of a task order will only be reimbursable to the extent authorized by the ordering agency. The Industrial Funding Fee does

NOT apply to travel and per diem charges.

(c) Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific

Last Update Date: 2024-03-01

FSC/service code classifications offered. All costs associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the

Multiple Award Schedule program.

(d) Insurance: As a commercial practice, the Contractor may be required to obtain/possess insurance coverage for specific FSC/service code classifications offered. All costs associated with obtaining/possessing such insurance should be factored into the price offered under the Multiple

Award Schedule program.

(e) Personnel: The Contractor may be required to provide key personnel, resumes or skill category descriptions in the performance of orders issued under this contract. Ordering activities may require agency approval of additions or replacements to key personnel.

(f) Organizational Conflicts of Interest: Where there may be an organizational conflict of interest as determined by the ordering agency, the Contractor’s participation in such order may be restricted in accordance with FAR Part 9.5.

(g) Documentation/Standards: The Contractor may be requested to provide products or services in accordance with rules, regulations, OMB orders, standards and documentation as specified by the agency’s order.

(h) Data/Deliverable Requirements: Any required data/deliverables at the ordering level will be as specified or negotiated in the agency’s order.

(i) Government-Furnished Property: As specified by the agency’s order, the Government may provide property, equipment, materials or resources as necessary.

(j) Availability of Funds: Many Government agencies’ operating funds are appropriated for a specific fiscal year. Funds may not be presently available for any orders placed under the contract or any option year. The Government’s obligation on orders placed under this contract is contingent upon the availability of appropriated funds from which payment for ordering purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are available to the ordering Contracting Officer.

(k) Overtime: For professional services, the labor rates in the Schedule should not vary by virtue of the

Contractor having worked overtime. For services applicable to the Service Contract Act (as identified in the Schedule), the labor rates in the Schedule will vary as governed by labor laws

(usually assessed a time and a half of the labor rate).

15. CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES:

Any ordering activity, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of

FAR 52.212-4, paragraphs (l) Termination for the ordering activity’s convenience, and (m) Termination for Cause (See 52.212-4)

16. GSA ADVANTAGE!

Last Update Date: 2024-03-01

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

(1) Manufacturer;

(2) Manufacturer's Part Number; and

(3) Product categories.

Agencies can browse GSA Advantage! The Internet address is http://www.gsaadvantage.gov

17. PURCHASE OF OPEN MARKET ITEMS

NOTE: Open Market Items are also known as incidental items, noncontract items, non-Schedule items, and items not on a Federal Supply Schedule contract. Ordering Activities procuring open market items must follow FAR 8.402(f).

For administrative convenience, an ordering activity contracting officer may add items not on the

Federal Supply Multiple Award Schedule (MAS) -- referred to as open market items -- to a Federal

Supply Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if-

(1) All applicable acquisition regulations pertaining to the purchase of the items not on the

Federal Supply Schedule have been followed (e.g., publicizing (Part 5), competition requirements (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs (Part 19));

(2) The ordering activity contracting officer has determined the price for the items not on the

Federal Supply Schedule is fair and reasonable;

(3) The items are clearly labeled on the order as items not on the Federal Supply Schedule;

and

(4) All clauses applicable to items not on the Federal Supply Schedule are included in the order.

18. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

Last Update Date: 2024-03-01

c. The maintenance/repair service provided is the standard commercial terms and conditions for the type of products and/or services awarded.

19. OVERSEAS ACTIVITIES

The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:

NOT APPLICABLE

Upon request of the Contractor, the ordering activity may provide the Contractor with logistics support, as available, in accordance with all applicable ordering activity regulations. Such ordering activity support will be provided on a reimbursable basis and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

20. BLANKET PURCHASE AGREEMENTS (BPAs)

The use of BPAs under any schedule contract to fill repetitive needs for supplies or services is allowable. BPAs may be established with one or more schedule contractors. The number of BPAs to be established is within the discretion of the ordering activity establishing the BPA and should be based on a strategy that is expected to maximize the effectiveness of the BPA(s). Ordering activities shall follow

FAR 8.405-3 when creating and implementing BPA(s).

21. CONTRACTOR TEAM ARRANGEMENTS

Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238-74, Industrial Funding Fee and

Sales Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

22.INSTALLATION, DEINSTALLATION, REINSTALLATION

The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the

United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall receive less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon

Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract.

However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act applies.

Last Update Date: 2024-03-01

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 132-8 or 132-9.

23. SECTION 508 COMPLIANCE.

I certify that in accordance with 508 of the Rehabilitation Act of 1973, as amended (29 U.S.C. 794d), FAR 39.2, and the Architectural and Transportation Barriers Compliance Board Electronic and

Information Technology (EIT) Accessibility Standards (36 CFR 1194) General Services Administration

(GSA), that all IT hardware/software/services are 508 compliant:

Yes __X___

No _______

The offeror is required to submit with its offer a designated area on its website that outlines the

Voluntary Product Accessibility Template (VPAT) or equivalent qualification, which ultimately becomes the Government Product Accessibility Template (GPAT). Section 508 compliance information on the supplies and services in this contract are available at the following website address (URL):

www.cpment.com

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES.

Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order

(a) A copy of the authorization from the ordering activity with whom the contractor has the prime contract (unless a copy was previously furnished to the Federal Supply Schedule contractor); and

(b) The following statement:

This order is placed under written authorization from _______ dated _______. In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern.

25. INSURANCE—WORK ON A GOVERNMENT INSTALLATION (JAN 1997)(FAR 52.228-5)

(a) The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

(b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective—

(1) For such period as the laws of the State in which this contract is to be performed prescribe; or http://www.cpment.com/

Last Update Date: 2024-03-01

(2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting

Officer, whichever period is longer.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors' proofs of required insurance and shall make copies available to the Contracting Officer upon request.

26. SOFTWARE INTEROPERABILITY.

Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interface may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program.

Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.

27. ADVANCE PAYMENTS

A payment under this contract to provide a service or deliver an article for the United States

Government may not be more than the value of the service already provided or the article already delivered. Advance or pre-payment is not authorized or allowed under this contract. (31 U.S.C. 3324) http://www.core.gov/

Last Update Date: 2024-03-01

SECTION B

TERMS AND CONDITIONS

Last Update Date: 2024-03-01

TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT)

PROFESSIONAL SERVICES (SPECIAL ITEM NUMBER 132-51)

1. SCOPE

a. The prices, terms and conditions stated under Special Item Number 54151

Information Technology Professional Services.

b. The Contractor shall provide services at the Contractor’s facility and/or at the ordering activity location, as agreed to by the Contractor and the ordering activity.

2. PERFORMANCE INCENTIVES I-FSS-60 Performance Incentives (April 2000)

a. Performance incentives may be agreed upon between the Contractor and the ordering activity on individual fixed price orders or Blanket Purchase Agreements under this contract.

b. The ordering activity must establish a maximum performance incentive price for these services and/or total solutions on individual orders or Blanket Purchase Agreements.

c. Incentives should be designed to relate results achieved by the contractor to specified targets. To the maximum extent practicable, ordering activities shall consider establishing incentives where performance is critical to the ordering activity’s mission and incentives are likely to motivate the contractor. Incentives shall be based on objectively measurable tasks.

3. ORDER

a. Agencies may use written orders, EDI orders, blanket purchase agreements, individual purchase orders, or task orders for ordering services under this contract. Blanket Purchase Agreements shall not extend beyond the end of the contract period; all services and delivery shall be made, and the contract terms and conditions shall continue in effect until the completion of the order. Orders for tasks which extend beyond the fiscal year for which funds are available shall include FAR 52.232-19 (Deviation –

May 2003) Availability of Funds for the Next Fiscal Year. The purchase order shall specify the availability of funds and the period for which funds are available.

b. All task orders are subject to the terms and conditions of the contract. In the event of conflict between a task order and the contract, the contract will take precedence.

4. PERFORMANCE OF SERVICES

a. The Contractor shall commence performance of services on the date agreed to by the Contractor and the ordering activity.

b. The Contractor agrees to render services only during normal working hours, unless otherwise agreed to by the Contractor and the ordering activity.

c. The ordering activity should include the criteria for satisfactory completion for each task in the

Statement of Work or Delivery Order. Services shall be completed in a good and workmanlike manner.

d. Any Contractor travel required in the performance must comply with the Federal Travel

Regulation or Joint Travel Regulations, as applicable, in effect on the date(s) the travel is performed.

Last Update Date: 2024-03-01

Established Federal Government per diem rates will apply to all Contractor travel. Contractors cannot use GSA city pair contracts.

5. STOP-WORK ORDER (FAR 52.242-15) (AUG 1989)

(a) The Contracting Officer may, at any time, by written order to the Contractor, require the

Contractor to stop all, or any part, of the work called for by this contract for a period of 90 days after the order is delivered to the Contractor, and for any further period to which the parties may agree. The order shall be specifically identified as a stop-work order issued under this clause. Upon receipt of the order, the Contractor shall immediately comply with its terms and take all reasonable steps to minimize the incurrence of costs allocable to the work covered by the order during the period of work stoppage.

Within a period of 90 days after a stop-work is delivered to the Contractor, or within any extension of that period to which the parties shall have agreed, the Contracting Officer shall either-

(1) Cancel the stop-work order; or

(2) Terminate the work covered by the order as provided in the Default, or the Termination for Convenience of the Government, clause of this contract.

(b) If a stop-work order issued under this clause is canceled or the period of the order or any extension thereof expires, the Contractor shall resume work. The Contracting Officer shall make an equitable adjustment in the delivery schedule or contract price, or both, and the contract shall be modified, in writing, accordingly, if-

(1) The stop-work order results in an increase in the time required for, or in the Contractor's cost properly allocable to, the performance of any part of this contract; and

(2) The Contractor asserts its right to the adjustment within 30 days after the end of the period of work stoppage; provided, that, if the Contracting Officer decides the facts justify the action, the Contracting Officer may receive and act upon the claim submitted at any time before final payment under this contract.

(c) If a stop-work order is not canceled and the work covered by the order is terminated for the convenience of the Government, the Contracting Officer shall allow reasonable costs resulting from the stop-work order in arriving at the termination settlement.

(d) If a stop-work order is not canceled and the work covered by the order is terminated for default, the Contracting Officer shall allow, by equitable adjustment or otherwise, reasonable costs resulting from the stop-work order.

6. INSPECTION OF SERVICES

In accordance with FAR 52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL

ITEMS (MAR 2009) (DEVIATION I - FEB 2007) for Firm-Fixed Price orders and FAR 52.212-4

CONTRACT TERMS AND CONDITIONS COMMERCIAL ITEMS (MAR 2009) (ALTERNATE I

OCT 2008) (DEVIATION I – FEB 2007) applies to Time-and-Materials and Labor-Hour Contracts orders placed under this contract.

7. RESPONSIBILITIES OF THE CONTRACTOR

Last Update Date: 2024-03-01

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City, or otherwise) covering work of this character. If the end product of a task order is software, then FAR

52.227-14 (Dec 2007) Rights in Data – General, may apply.

8. RESPONSIBILITIES OF THE ORDERING ACTIVITY

Subject to security regulations, the ordering activity shall permit Contractor access to all facilities necessary to perform the requisite IT/IAM Professional Services.

9. INDEPENDENT CONTRACTOR

All Services performed by the Contractor under the terms of this contract shall be as an independent

Contractor, and not as an agent or employee of the ordering activity.

10. ORGANIZATIONAL CONFLICTS OF INTEREST

a. Definitions.

“Contractor” means the person, firm, unincorporated association, joint venture, partnership, or corporation that is a party to this contract.

“Contractor and its affiliates” and “Contractor or its affiliates” refers to the Contractor, its chief executives, directors, officers, subsidiaries, affiliates, subcontractors at any tier, and consultants and any joint venture involving the Contractor, any entity into or with which the Contractor subsequently merges or affiliates, or any other successor or assignee of the Contractor.

An “Organizational conflict of interest” exists when the nature of the work to be performed under a proposed ordering activity contract, without some restriction on ordering activities by the Contractor and its affiliates, may either (i) result in an unfair competitive advantage to the Contractor or its affiliates or

(ii) impair the Contractor’s or its affiliates’ objectivity in performing contract work.

b. To avoid an organizational or financial conflict of interest and to avoid prejudicing the best interests of the ordering activity, ordering activities may place restrictions on the Contractors, its affiliates, chief executives, directors, subsidiaries and subcontractors at any tier when placing orders against schedule contracts. Such restrictions shall be consistent with FAR 9.505 and shall be designed to avoid, neutralize, or mitigate organizational conflicts of interest that might otherwise exist in situations related to individual orders placed against the schedule contract. Examples of situations, which may require restrictions, are provided at FAR 9.508.

11. INVOICES

The Contractor, upon completion of the work ordered, shall submit invoices. Progress payments may be authorized by the ordering activity on individual orders if appropriate. Progress payments shall be based upon completion of defined milestones or interim products. Invoices shall be submitted monthly for recurring services performed during the preceding month.

12. PAYMENTS

Last Update Date: 2024-03-01

For firm-fixed price orders the ordering activity shall pay the Contractor, upon submission of proper invoices or vouchers, the prices stipulated in this contract for service rendered and accepted. Progress payments shall be made only when authorized by the order. For time-and-materials orders, the

Payments under Time-and-Materials and Labor-Hour Contracts at FAR 52.212-4 (MAR 2009)

(ALTERNATE I – OCT 2008) (DEVIATION I – FEB 2007) applies to time-and-materials orders placed under this contract. For labor-hour orders, the Payment under Time-and-Materials and Labor-Hour

Contracts at FAR 52.212-4 (MAR 2009) (ALTERNATE I – OCT 2008) (DEVIATION I – FEB 2007) applies to labor-hour orders placed under this contract. 52.216-31(Feb 2007) Time-and-Materials/Labor-

Hour Proposal Requirements—Commercial Item Acquisition. As prescribed in 16.601(e)(3), insert the following provision:

(a) The Government contemplates award of a Time-and-Materials or Labor-Hour type of contract resulting from this solicitation.

(b) The offeror must specify fixed hourly rates in its offer that include wages, overhead, general and administrative expenses, and profit. The offeror must specify whether the fixed hourly rate for each labor category applies to labor performed by—

(1) The offeror;

(2) Subcontractors; and/or

13. RESUMES

Resumes shall be provided to the GSA Contracting Officer or the user ordering activity upon request.

14. INCIDENTAL SUPPORT COSTS

Incidental support costs are available outside the scope of this contract. The costs will be negotiated separately with the ordering activity in accordance with the guidelines set forth in the FAR.

15. APPROVAL OF SUBCONTRACTS

The ordering activity may require that the Contractor receive, from the ordering activity's Contracting

Officer, written consent before placing any subcontract for furnishing any of the work called for in a task order.

Last Update Date: 2024-03-01

USA COMMITMENT TO PROMOTE

SMALL BUSINESS PARTICIPATION

PROCUREMENT PROGRAMS

PREAMBLE

CPM Enterprises LLC, provides commercial services to ordering activities. We are committed to promoting participation of small, small disadvantaged and women-owned small businesses in our contracts. We pledge to provide opportunities to the small business community through reselling opportunities, mentor-protégé programs, joint ventures, teaming arrangements, and subcontracting.

COMMITMENT

To actively seek and partner with small businesses.

To identify, qualify, mentor and develop small, small disadvantaged and women-owned small businesses by purchasing from these businesses whenever practical.

To develop and promote company policy initiatives that demonstrate our support for awarding contracts and subcontracts to small business concerns.

To undertake significant efforts to determine the potential of small, small disadvantaged and women-owned small business to supply products and services to our company.

To ensure procurement opportunities are designed to permit the maximum possible participation of small, small disadvantaged, and women-owned small businesses.

To attend business opportunity workshops, minority business enterprise seminars, trade fairs, procurement conferences, etc., to identify and increase small businesses with whom to partner.

To publicize in our marketing publications our interest in meeting small businesses that may be interested in subcontracting opportunities.

We signify our commitment to work in partnership with small, small disadvantaged and women-owned small businesses to promote and increase their participation in ordering activity contracts. To accelerate potential opportunities please contact Albert Powell, President/CEO al.powell@cpment.com mailto:al.powell@cpment.com

Last Update Date: 2024-03-01

BEST VALUE

BLANKET PURCHASE AGREEMENT

FEDERAL SUPPLY SCHEDULE

(Insert Customer Name)

In the spirit of the Federal Acquisition Streamlining Act (ordering activity) and (Contractor) enter into a cooperative agreement to further reduce the administrative costs of acquiring commercial items from the General Services Administration (GSA) Federal Supply Schedule Contract(s)

Federal Supply Schedule contract BPAs eliminate contracting and open market costs such as: search for sources; the development of technical documents, solicitations and the evaluation of offers. Teaming

Arrangements are permitted with Federal Supply Schedule Contractors in accordance with Federal

Acquisition Regulation (FAR) 9.6.

This BPA will further decrease costs, reduce paperwork, and save time by eliminating the need for repetitive, individual purchases from the schedule contract. The end result is to create a purchasing mechanism for the ordering activity that works better and costs less.

Signatures

Ordering Activity Date Contractor Date

Last Update Date: 2024-03-01

BPA NUMBER_____________

(CUSTOMER NAME)

BLANKET PURCHASE AGREEMENT

Pursuant to GSA Federal Supply Schedule Contract Number(s)____________, Blanket Purchase

Agreements, the Contractor agrees to the following terms of a Blanket Purchase Agreement (BPA)

EXCLUSIVELY WITH (ordering activity):

(1) The following contract items can be ordered under this BPA. All orders placed against this BPA are subject to the terms and conditions of the contract, except as noted below:

MODEL NUMBER/PART NUMBER *SPECIAL BPA

DISCOUNT/PRICE

(2) Delivery:

DESTINATION DELIVERY SCHEDULES / DATES

(3) The ordering activity estimates, but does not guarantee, that the volume of purchases through this agreement will be _________________________.

(4) This BPA does not obligate any funds.

(5) This BPA expires on _________________ or at the end of the contract period, whichever is earlier.

(6) The following office(s) is hereby authorized to place orders under this BPA:

OFFICE POINT OF CONTACT

(7) Orders will be placed against this BPA via Electronic Data Interchange (EDI), FAX, or paper.

Last Update Date: 2024-03-01

(8) Unless otherwise agreed to, all deliveries under this BPA must be accompanied by delivery tickets or sales slips that must contain the following information as a minimum:

(a) Name of Contractor;

(b) Contract Number;

(c) BPA Number;

(d) Model Number or National Stock Number (NSN);

(e) Purchase Order Number;

(f) Date of Purchase;

(g) Quantity, Unit Price, and Extension of Each Item (unit prices and extensions need not be shown when incompatible with the use of automated systems; provided, that the invoice is itemized to show the information); and

(h) Date of Shipment.

(9) The requirements of a proper invoice are specified in the Federal Supply Schedule contract.

Invoices will be submitted to the address specified within the purchase order transmission issued against this BPA.

(10) The terms and conditions included in this BPA apply to all purchases made pursuant to it. In the event of an inconsistency between the provisions of this BPA and the Contractor’s invoice, the provisions of this BPA will take precedence.

BASIC GUIDELINES FOR USING

“CONTRACTOR TEAM ARRANGEMENTS”

Federal Supply Schedule Contractors may use “Contractor Team Arrangements” (see FAR 9.6) to provide solutions when responding to an ordering activity requirements.

These Team Arrangements can be included under a Blanket Purchase Agreement (BPA). BPAs are permitted under all Federal Supply Schedule contracts.

Orders under a Team Arrangement are subject to terms and conditions or the Federal Supply Schedule

Contract.

Participation in a Team Arrangement is limited to Federal Supply Schedule Contractors.

Customers should refer to FAR 9.6 for specific details on Team Arrangements.

Here is a general outline on how it works:

• The customer identifies their requirements.

• Federal Supply Schedule Contractors may individually meet the customer’s needs, or -

• Federal Supply Schedule Contractors may individually submit a Schedules “Team

Solution” to meet the customer’s requirement.

• Customers make a best value selection.

Last Update Date: 2024-03-01

SECTION C

LABOR SERVICE DESCRIPTIONS

Last Update Date: 2024-03-01

Service Offerings

FPDS Code D301 IT Facility Operation and Maintenance

CPM Enterprises LLC offers IT facility operations and maintenance services across a wide range of commercial ADP equipment and software. We provide facility planning; client/server migrations;

operational support; technical support; end user support; help desk operations; computer operations;

remedial and preventive maintenance management; security management; communications operations; system performance analysis and management; systems tuning; systems programming;

product evaluation and recommendations; capacity planning; and security analysis, implementation and management.

FPDS Code D302 IT Systems Development Services

IT System Development services include requirements analysis; process analysis and design;

cost/benefit analysis; product evaluation and analysis; quality assurance planning; test planning;

training planning; logical and physical IT system design; configuration management; and implementation and support. For each project, the company furnishes complete documentation and deliverables in accordance with the approved methodology.

FPDS Code D306 IT Systems Analysis Services

CPM Enterprises LLC offers the analysis and design of a broad variety of information, business and scientific systems applications. The company analyzes business processes and through intensive interaction with the user and technical communities, documents current and improved processes, defines requirements, and submits the results to the customer for review and approval. Upon approval, our company designs the application using state-of-the-art methodologies, techniques and tools. We use a customer-defined methodology or our flexible and proven methodology. These methodologies can include business process reengineering, prototyping and pilot tests. Also included in this area are systems and applications software maintenance. For each project, our company furnishes complete documentation and deliverables in accordance with the approved methodology for users and systems personnel.

FPDS Code D307 Automated Information Systems Design and Integration Services

Automated Information Systems Design and Integration services include requirements analysis;

process analysis and design; commercially of the shelf (COTS) hardware and software; cost/benefit analysis; product evaluation and analysis; quality assurance planning; test planning; training planning; logical and physical IT system design and integration; configuration management; and implementation and support. For each project, the company furnishes complete documentation and deliverables in accordance with the approved methodology.

FPDS Code D399 IT and Telecom-Other IT and Telecommunications- Other Information

Technology Services.

Last Update Date: 2024-03-01

FPDS Code D308 Programming Services

Programming services include the full lifecycle methodology with multiple approaches using industry or homegrown methodologies included. Programming services includes: Languages

C#

MS Visual C++

Java

Visual Basic 6.0

T-SQL, PL/SQL

HTML

XML

UNIX Shell Scripting

Cold Fusion

Environments

MS Windows 98, NT, 2000, XP.Net

UNIX /LINUX/BSD

Databases

SQL Server

Oracle

MS Access

Tools

.Net Studio

IBM Websphere Developer Studio

Symantec Visual Café

MS Visual Developer Studio 6.0

Cold Fusion Studio 5.0

Internet & Intranet

ASP.Net

ASP 3.0

Cold Fusion

JSP

HTTP and Proxy Server

IIS 4/5/6

Apache

IBM Websphere

MS IAS

Security Firewalls

E-Mail Server (SMTP and POP3)

Web Page Design (HTML, XML, JAVA, Active-X)

Last Update Date: 2024-03-01

FPDS Code D310 IT Backup and Security Services

CPM Enterprises LLC support for IT backup and security for end user computing systems. Our structured approach includes, but is not limited to awareness training, threats and vulnerabilities, a comprehensive analysis and review of corporate information security policies and procedures, surveys, interviews, on-site observations and information system penetration testing. For each project, our company furnishes complete documentation and deliverables in accordance with the approved methodology for users and systems personnel.

FPDS Code D311 IT Data Conversion Services

CPM Enterprises LLC offers support for conversion of application programs, databases, network operating systems and end user computing systems. The services include, but are not limited to, analysis of the conversion requirement; cost/benefit analysis of alternatives; development of comprehensive test plans; design and construction of conversion routines and filters; system conversion; migration of the new system/data to the target hardware and software infrastructure;

complete system and user acceptance testing; and post-conversion review. For each project, our company furnishes complete documentation and deliverables in accordance with the approved methodology for users and system personnel.

FPDS FPDS Code D316 IT Network Management Services

CPM Enterprises LLC IT Network Management services for local, metropolitan and wide area networks include, but are not limited to, network requirements analysis; planning, design;

engineering; installation; operations; help desk support; performance monitoring; performance tuning; security management; firewall design and construction; and classified support. For each project, our company furnishes complete documentation and deliverables in accordance with the approved methodology for users and systems personnel.

Last Update Date: 2024-03-01

SECTION D

LABOR CATEGORY DESCRIPTIONS

Last Update Date: 2024-03-01

Labor Category Descriptions

Program Manager Responsibilities: Leads projects that involve the successful management of teams composed of data processing and other information management professionals who have been involved in analysis, design, integration, testing, documenting, converting, extending, and implementing automated information and/or telecommunications systems. Performs day-to-day management of overall contract support operations, possibly involving multiple projects and groups of personnel at multiple locations. Organizes, directs, and coordinates the planning and production of all contract support activities. Demonstrates written and oral communication skills. Establishes and alters (as necessary) corporate management structure to direct effective contract support activities.

Education Requirements / Experience: 5 Years work experience and/or master’s degree in related field.

Database Management

Specialist

Responsibilities: Experience in DBMS system analysis and programming.

Experience in using current DBMS technologies and application design using various database management systems; experience with DBMS internals. Must be capable of providing highly technical expertise and support in the use of DBMS.

Must be able to evaluate and recommend available DBMS products to support validated user requirements. Defines file organization, indexing methods, and security procedures for specific user applications. Develops, implements, and maintains database backup and recovery procedures for the processing environments and ensures that data integrity, security, and recoverability are built into the DBMS applications.

Education Requirements / Experience: 5 Years work experience and/or master’s degree in related field

Business Data Analyst Responsibilities: Provides support in collecting and organizing information required for preparation of user manuals, training materials, installation guides, proposals,…