MAS - DBP Inc. - 47QSMA19D08QT

Price Catalogue for

SIN 518210DC Document Conversion Services

DBP, Inc.

12801 Auburn Street Detroit, MI 48223 www.dbp1.com

CAGE Code : 1Y8Y9 DUNS No : 020850186

Feb 2024 http://www.dbp1.com/

GSA MAS

Contract 47QSMA19D08QT

Table of Contents

1) Information for Ordering Activities Applicable to all Special ItemNumbers

2) Products and Services Price List

3) Blanket Purchase Agreements (BPAs)

Page | 1

1)INFORMATION FORORDERINGACTIVITIESAPPLICABLETO ALLSPECIAL

ITEMNUMBERS

SPECIAL NOTICE TO AGENCIES: Small Business Participation

SBA strongly supports the participation of small business concerns in the Federal Supply Schedules Program.

To enhance Small Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.

For orders exceeding the micro purchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage!™ online shopping service (www.fss.gsa.gov). The catalogs/pricelists, GSA

Advantage! ™ And the Federal Supply Service Home Page (www.fss.gsa.gov) contains information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micro purchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.

1) GEOGRAPHIC SCOPE OF CONTRACT:

Domestic and Overseas Delivery

2) CONTRACTOR’ S ORDERING ADDRESS AND PAYMENT INFORMATION:

Physical Address

DBP, Inc.

12801 Auburn Street

Detroit, MI 48223

Billing Address

DBP, Inc.

P.O. Box 518

Royal Oak, MI 48068-0518

Contractors are required to accept credit cards for payments equal to or less than the micro- purchase threshold for oral or written delivery orders. Credit cards will be acceptable for payment above the micro-purchase threshold. In addition, bank account information for wire transfer payments will be shown on the invoice.

The following telephone number and email can be used by ordering activities to obtain technical and/or ordering assistance:

Point of Contact: Richard L. Williams, President

Phone: 248.797.2620 / proposals@dbp1.com mailto:proposals@dbp1.com

Page | 2

3) LIABILITY FOR INJURY OR DAMAGE

The Contractor shall not be liable for any injury to ordering activity personnel or damage to ordering activity property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.

4) STATICAL DATA FOR GOVERNMENT ORDERING OFFICE COMPLETION

OF STANDARD FORM 279:

Block 9: G. Order/Modification under Federal Schedule

Block 16: Data Universal Numbering System (DUNS) Number: 020850186

Block 30: Type of Contractor - A

HUBZone business, Service Disabled Veteran Owned Small Business (SDVOSB

Block 36: Contractor's Taxpayer Identification Number (TIN): 38-3114166

4a. CAGE Code: 1Y8Y9

4b. Contractor has registered with the Central Contractor Registration Database.

FOB DESTINATION

DELIVERY SCHEDULE

TIME OF DELIVERY: The Contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as set forth below:

SPECIAL ITEM NUMBER DELIVERY TIME (Days ARO)

518210DC Document Conversion Services Dependent on contracted turn around time (TAT)

URGENT REQUIREMENTS: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering activity, ordering activities are encouraged, if time permits, to contact the Contractor for the purpose of obtaining accelerated delivery. The Contractor shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery time acceptable to the ordering activity, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

DISCOUNTS: Prices shown are NET Prices; Basic Discounts have been deducted.

Prompt Payment: 1% -7 days from receipt of invoice or date of acceptance, whichever is later?

Quantity Dollar Volume Government Educational Institutions

Government Educational Institutions are offered the same discounts as all other Government customers

Other

TRADE AGREEMENTS ACT OF 1979, as amended:

All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.

Page | 3

STATEMENT CONCERNING AVAILABILITY OF EXPORT PACKING:

1. SMALL REQUIREMENTS: The minimum dollar value of orders to be issued is $100.00

MAXIMUM ORDER (All dollar amounts are exclusive of any discount for prompt payment.)

a. The Maximum Order value for the following Special Item Numbers (SINs) is $500,000:

Special Item Number 518210DC – Document Conversion Services

2. ORDERING PROCEEDURES FOR FEDERAL SUPPLY SCHEDULE CONTRACTS Ordering activities shall use the ordering procedures of Federal Acquisition Regulation (FAR) 8.405 when placing an order or establishing a BPA for supplies or services. These procedures apply to all schedules.

a. FAR 8.405-1 Ordering procedures for supplies, and services not requiring a statement of work.

b. FAR 8.405-2 Ordering procedures for services requiring a statement of work.

FEDERAL INFORMATIONTECHNOLOGY/ TELECOMMUNICATION STANDARDS

REQUIREMENTS:

Ordering activities acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index). Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering activities, shall be responded to promptly by the Contractor.

FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS PUBS):

Information Technology products under this Schedule that do not conform to Federal Information Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication." Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use. Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487-4650.

FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS):

Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD." Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Supply Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619-8925. Please include a self-addressed mailing label when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301)975-2833.

CONTRACTOR TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2001)

(a) Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract. All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the Multiple Award Schedule.

(b) Travel: The Contractor may be required to travel in performance of orders issued under this contract.

Page | 4

Allowable travel and per diem charges are governed by Pub .L. 99-234 and FAR Part 31, and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the

Multiple Award Schedule. The Industrial Funding Fee does NOT apply to travel and per diem charges.

NOTE: Refer to FAR Part 31.205-46 Travel Costs, for allowable costs that pertain to official company business travel in regards to this contract.

(c) Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific FSC/service code classifications offered. All costs associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the Multiple Award Schedule program.

(d) Insurance: As a commercial practice, the Contractor may be required to obtain/possess insurance coverage for specific FSC/service code classifications offered. All costs associated with obtaining/possessing such insurance should be factored into the price offered under the Multiple Award Schedule program.

(e) Personnel: The Contractor may be required to provide key personnel, resumes or skill category descriptions in the performance of orders issued under this contract. Ordering activities may require agency approval of additions or replacements to key personnel.

(f) Organizational Conflicts of Interest: Where there may be an organizational conflict of interest as determined by the ordering agency, the Contractor’s participation in such order may be restricted in accordance with FAR Part 9.5

(g) Documentation/Standards: The Contractor may be requested to provide products or services in accordance with rules, regulations, OMB orders, standards and documentation as specified by the agency’s order.

(h) Data/Deliverable Requirements: Any required data/deliverables at the ordering level will be as specified or negotiated in the agency’s order.

(i) Government-Furnished Property: As specified by the agency’s order, the Government may provide property, equipment, materials or resources as necessary.

(j) Availability of Funds: Many Government agencies’ operating funds are appropriated for a specific fiscal year. Funds may not be presently available for any orders placed under the contract or any option year. The Government’s obligation on orders placed under this contract is contingent upon the availability of appropriated funds from which payment for ordering purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are available to the ordering Contracting Officer.

CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES:

Any ordering activity, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of

FAR 52.212-4, paragraphs (l) Termination for the ordering activity’s convenience, and

(m) Termination for Cause (See C.1.)

GSA ADVANTAGE!

Page | 5

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

(1) Manufacturer;

(2) Manufacturer's Part Number; and

(3) Product categories.

Agencies can browse GSA Advantage! By accessing the Internet World Wide Web utilizing a browser (ex.:

Netscape). The Internet address is http://www.fss.gsa.gov/.

PURCHASE OF OPEN MARKET ITEMS

NOTE: Open Market Items are also known as incidental items, noncontract items, non-Schedule items, and items not on a Federal Supply Schedule contract. ODCs (Other Direct Costs) are not part of this contract and should be treated as open market purchases. Ordering Activities procuring open market items must follow FAR 8.402(f).

For administrative convenience, an ordering activity contracting officer may add items not on the Federal

Supply Multiple Award Schedule (MAS) -- referred to as open market items -- to a Federal Supply

Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if-

(1) All applicable acquisition regulations pertaining to the purchase of the items not on the Federal Supply Schedule have been followed (e.g., publicizing (Part 5), competition requirements (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs (Part 19));

(2) The ordering activity contracting officer has determined the price for the items not on the Federal

Supply Schedule is fair and reasonable;

(3) The items are clearly labeled on the order as items not on the Federal Supply Schedule; and

(4) All clauses applicable to items not on the Federal Supply Schedule are included in the order.

CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

OVERSEAS ACTIVITIES

The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:

Will be provided prior to executing the order

Upon request of the Contractor, the ordering activity may provide the Contractor with logistics support, http://www.fss.gsa.gov/

Page | 6 as available, in accordance with all applicable ordering activity regulations. Such ordering activity support will be provided on a reimbursable basis, and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

BLANKET PURCHASE AGREEMENTS (BPAs)

The use of BPAs under any schedule contract to fill repetitive needs for supplies or services is allowable.

BPAs may be established with one or more schedule contractors. The number of BPAs to be established is within the discretion of the ordering activity establishing the BPA and should be based on a strategy that is expected to maximize the effectiveness of the BPA(s). Ordering activities shall follow FAR 8.405-3 when creating and implementing BPA(s).

CONTRACTOR TEAM ARRANGEMENTS

Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238-74; Industrial Funding Fee and Sales Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

INSTALLATION, DEINSTALLATION, REINSTALLATION

The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis- Bacon Act apply.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under

SIN 132-8.

SECTION 508 COMPLIANCE

If applicable, Section 508 compliance information on the supplies and services in this contract are available in Electronic and Information Technology (EIT) at the following:

The EIT standard can be found at: www.Section508.gov/.

23. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order –

(a) A copy of the authorization from the ordering activity with whom the contractor has the prime contract (unless a copy was previously furnished to the Federal Supply Schedule contractor); and

(b) The following statement: This order is placed under written authorization from dated. In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern.

INSURANCE—WORKS ON A GOVERNMENT INSTALLATION (JAN 1997) (FAR 52.228-5)

http://www.section508.gov/

Page | 7

(a) The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

(b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective—

(1) For such period as the laws of the State in which this contract is to be performed prescribe; or

(2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors' proofs of required insurance, and shall make copies available to the Contracting Officer upon request.

SOFTWARE INTEROPERABILITY

Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interface may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.

ADVANCE PAYMENTS

A payment under this contract to provide a service or deliver an article for the United States Government may not be more than the value of the service already provided or the article already http://www.core.gov/

Page | 8

2) PRODUCTS AND SERVICES PRICE LIST

DBP offers remote transcription services. The following rates are not computed using personnel wages.

Line = 65 gross characters (includes white space), 12-pt. Time New Roman.

SIN

SERVICE

PROPOSED

PRICE

OFFERED

TO GSA

(excluding

IFF)

PRICE

OFFERED TO

GSA (including

518210DC

Emergency Transcription

Service: 4-hour turnaround time.

$0.1625

$0.1626

Transcription Service: 24-hour

(1 day)

$0.1525

$0.1526

Service: 48-hour

(2 day)

$0.1425

$0.1426

Service: 72-hour

(3 day)

$0.1350

$0.1351

Service: 120-hour (5 day) turnaround time.

$0.1325

$0.1327

Line = 65 Visible Black Characters (VBC), 12-pt. Time New Roman.

PRICE

OFFERED

TO GSA

Transcription

$0.1748

$0.1749

Page | 9

Service: 24-hour (1 day) turnaround

$0.1482

$0.1483

Line = 65 Visible Black Characters (VBC), 12-pt. Time New Roman.

Service: 48-hour

(2 day) turnaround

$0.1720

$0.1721

Service: 72-hour

(3 day) turnaround

$0.1685

$0.1686

Service: 120-hour (5 day)

$0.1630

$0.1632

Rate per Audio Minute

PRICE

OFFERED

TO GSA

Transcription

$2.35

$2.37

Service: 24-hour

(1 day) turnaround

$2.21

$2.23

Service: 48-hour

(2 day) turnaround

$2.12

$2.13

Service: 72-hour

(3 day) turnaround

$2.12

$2.13

Service: 120-hour (5 day)

$1.75

$1.76

Page | 10

3) BLANKET PURCHASE AGREEMENTS (BPAS).

(a) Establishment.

(1) Ordering activities may establish BPAs under any schedule contract to fill repetitive needs for supplies or services. Ordering activities shall establish the BPA with the schedule contractor(s) that can provide the supply or service that represents the best value.

(2) In addition to price (see 8.404(d) and 8.405-4), when determining best value, the ordering activity may consider, among other factors, the following:

(i) Past performance.

(ii) Special features of the supply or service required for effective program performance.

(iii) Trade-in considerations.

(iv) Probable life of the item selected as compared with that of a comparable item.

(v) Warranty considerations.

(vi) Maintenance availability.

(vii) Environmental and energy efficiency considerations.

(viii) Delivery terms.

(3) ) (i) The ordering activity contracting officer shall, to the maximum extent practicable, give preference to establishing multiple-award BPAs, rather than establishing a single-award BPA.

(ii) No single-award BPA with an estimated value exceeding $112 million (including any options), may be awarded unless the head of the agency determines in writing that-

(A) The orders expected under the BPA are so integrally related that only a single source can reasonably perform the work;

(B) The BPA provides only for firm-fixed priced orders for-

Page | 11

(1) Products with unit prices established in the BPA; or

(2) Services with prices established in the BPA for specific tasks to be performed;

(C) Only one source is qualified and capable of performing the work at a reasonable price to the Government; or

(D) It is necessary in the public interest to award the BPA to a single source for exceptional circumstances.

(iii) The requirement for a determination for a single-award BPA greater than $112 million is in addition to any applicable requirement for a limited-source justification at 8.405-6. However, the two documents may be combined into one document.

(iv) In determining how many multiple-award BPAs to establish or that a single-award BPA is appropriate, the contracting officer should consider the following factors and document the decision in the acquisition plan or BPA file:

(A) The scope and complexity of the requirement(s);

(B) ) The benefits of on-going competition and the need to periodically compare multiple technical approaches or prices;

(C) ) The administrative costs of BPAs; and

(D) The technical qualifications of the schedule contractor(s).

(4) BPAs shall address the frequency of ordering, invoicing, discounts, requirements

(e.g., estimated quantities, work to be performed), delivery locations, and time.

(5) When establishing multiple-award BPAs, the ordering activity shall specify the procedures for placing orders under the BPAs in accordance with 8.405-3(c)(2).

(6) Establishment of a multi-agency BPA against a Federal Supply Schedule contract is permitted if the multi-agency BPA identifies the participating agencies and their estimated requirements at the time the BPA is established.

(7) Minimum documentation. The ordering activity contracting officer shall include in the BPA file documentation the-

(i) Schedule contracts considered, noting the contractor to which the BPA was awarded;

Page | 12

(ii) Description of the supply or service purchased;

(iii) Price;

(iv) Required justification for a limited-source BPA (see 8.405-6), if applicable;

(v) Determination for a single-award BPA exceeding $112 million, if applicable (see

(a)(3)(ii)) of this section);

(vi) Documentation supporting the decision to establish multiple-award BPAs or a single-award BPA (see (a)(3)(iv));

(vii) Evidence of compliance with paragraph (b) of this section, for competitively awarded BPAs, if applicable; and

(viii) Basis for the award decision. This should include the evaluation methodology used in selecting the contractor, the rationale for any tradeoffs in making the selection, and a price reasonableness determination for services requiring a statement of work.

(b) Competitive procedures for establishing a BPA. This paragraph applies to the establishment of a BPA, in addition to applicable instructions in paragraph (a).

(1) For supplies, and for services not requiring a statement of work. The procedures of this paragraph apply when establishing a BPA for supplies and services that are listed in the schedule contract at a fixed price for the performance of a specific task, where a statement of work is not required (e.g., installation, maintenance, and repair).

(i) If the estimated value of the BPA does not exceed the simplified acquisition threshold.

(A) The ordering activity shall:

(1) Consider reasonably available information about the supply or service offered under MAS contracts by surveying at least three schedule contractors through the GSA Advantage! on-line shopping service, by reviewing the catalogs or pricelists of at least three schedule contractors, or by requesting quotations from at least three schedule contractors (see 8.405-5); or

2) Document the circumstances for restricting consideration to fewer than three schedule contractors based on one of the reasons at 8.405-6(a).

(B) ) The ordering activity shall establish the BPA with the schedule contractor(s) that can provide the best value.

Page | 13

(ii) If the estimated value of the BPA exceeds the simplified acquisition threshold.

The ordering activity contracting officer:

(A) Shall provide an RFQ that includes a description of the supplies to be delivered or the services to be performed and the basis upon which the selection will be made.

(B) (1) Shall post the RFQ on e-Buy to afford all schedule contractors offering the required supplies or services under the appropriate multiple award schedule(s) an opportunity to submit a quote; or

(2) Shall provide the RFQ to as many schedule contractors as practicable, consistent with market research appropriate to the circumstances, to reasonably ensure that quotes will be received from at least three contractors that can fulfill the requirements.

When fewer than three quotes are received from schedule contractors that can fulfill the requirements, the contracting officer shall prepare a written determination explaining that no additional contractors capable of fulfilling the requirements could be identified despite reasonable efforts to do so. The determination must clearly explain efforts made to obtain quotes from at least three schedule contractors.

(C) Shall ensure all quotes received are fairly considered and award is made in accordance with the basis for selection in the RFQ. After seeking price reductions

(see 8.405-4), establish the BPA with the schedule contractor(s) that provides the best value.

(D) The BPA must be established in accordance with paragraphs (b)(1)(ii)(B) and (C) of this section, unless the requirement is waived on the basis of a justification that is prepared and approved in accordance with 8.405-6.

(2) For services requiring a statement of work. This applies when establishing a BPA that requires services priced at hourly rates, as provided by the schedule contract. The applicable services will be identified in the Federal Supply Schedule publications and the contractor’s pricelists.

(i) Statements of Work (SOWs). The ordering activity shall develop a statement of work. All Statements of Work shall include a description of work to be performed;

location of work; period of performance; deliverable schedule; applicable performance standards; and any special requirements (e.g., security clearances, travel, and special knowledge). To the maximum extent practicable, agency requirements shall be performance-based statements (see subpart 37.6).

(ii) Type-of-order preference. The ordering activity shall specify the order type (i.e., firm-fixed price, time-and-materials, or labor-hour) for the services identified in the

Page | 14 statement of work. The contracting officer should establish firm-fixed priced orders to the maximum extent practicable. For time-and-materials and labor-hour orders, the contracting officer shall follow the procedures at 8.404(h).

(iii) Request for Quotation procedures. The ordering activity must provide a RFQ, which includes the statement of work and evaluation criteria (e.g., experience and past performance), to schedule contractors that offer services that will meet the agency’s needs. The RFQ may be posted to GSA’s electronic RFQ system, e-Buy

(see 8.402(d)).

(iv) If the estimated value of the BPA does not exceed the simplified acquisition threshold. The ordering activity shall provide the RFQ (including the statement of work and evaluation criteria) to at least three schedule contractors that offer services that will meet the agency’s needs.

(v) If estimated value of the BPA exceeds the simplified acquisition threshold. The ordering activity contracting officer-

(A) Shall post the RFQ on e-Buy to afford all schedule contractors offering the required supplies or services under the appropriate multiple-award schedule an opportunity to submit a quote; or

(B) ) Shall provide the RFQ, which includes the statement of work and evaluation criteria, to as many schedule contractors as practicable, consistent with market research appropriate to the circumstances, to reasonably ensure that quotes will be received from at least three contractors that can fulfill the requirements. When fewer than three quotes are received from schedule contractors that can fulfill the requirements, the contracting officer shall document the file. The contracting officer shall prepare a written determination explaining that no additional contractors capable of fulfilling the requirements could be identified despite reasonable efforts to do so.

The determination must clearly explain efforts made to obtain quotes from at least three schedule contractors.

(vi) The ordering activity contracting officer shall ensure all quotes received are fairly considered and award is made in accordance with the basis for selection in the

RFQ. The ordering activity is responsible for considering the level of effort and the mix of labor proposed to perform, and for determining that the proposed price is reasonable.

(vii) The BPA must be established in accordance with paragraph (b)(2)(iv) or (v), and with paragraph (b)(2)(vi) of this section, unless the requirement is waived on the basis of a justification that is prepared and approved in accordance with 8.405-6.

Page | 15

(viii) The ordering activity contracting officer shall establish the BPA with the schedule contractor(s) that represents the best value (see 8.404(d) and 8.405-4).

(3) After award, ordering activities should provide timely notification to unsuccessful offerors. If an unsuccessful offeror requests information on an award that was based on factors other than price alone, a brief explanation of the basis for the award decision shall be provided.

(c) Ordering from BPAs. The procedures in this paragraph (c) are not required for

BPAs established on or before May 16, 2011. However, ordering activities are encouraged to use the procedures for such BPAs.

(1) Single-award BPA. If the ordering activity establishes a single-award BPA, authorized users may place the order directly under the established BPA when the need for the supply or service arises.

(2) Multiple-award BPAs.

(i) Orders at or below the micro-purchase threshold. The ordering activity may place orders at or below the micro-purchase threshold with any BPA holder that can meet the agency needs. The ordering activity should attempt to distribute any such orders among the BPA holders.

(ii) Orders exceeding the micro-purchase threshold but not exceeding the simplified acquisition threshold.

(A) The ordering activity must provide each multiple-award BPA holder a fair opportunity to be considered for each order exceeding the micro-purchase threshold, but not exceeding the simplified acquisition threshold unless one of the exceptions at 8.405-6(a)(1)(i) applies.

(B) ) The ordering activity need not contact each of the multiple-award BPA holders before placing an order if information is available to ensure that each BPA holder is provided a fair opportunity to be considered for each order.

(C) ) The ordering activity contracting officer shall document the circumstances when restricting consideration to less than all multiple-award BPA holders offering the required supplies and services.

(iii) Orders exceeding the simplified acquisition threshold.

(A) The ordering activity shall place an order in accordance with paragraphs

(c)(2)(iii)(A)(1), (2) and (3) of this paragraph, unless the requirement is waived on the

Page | 16 basis of a justification that is prepared and approved in accordance with 8.405-6. The ordering activity shall-

(1) Provide an RFQ to all BPA holders offering the required supplies or services under the multiple-award BPAs, to include a description of the supplies to be delivered or the services to be performed and the basis upon which the selection will be made;

(2) ) Afford all BPA holders responding to the RFQ an opportunity to submit a quote; and

(3) Fairly consider all responses received and make award in accordance with the selection procedures.

(B) The ordering activity shall document evidence of compliance with these procedures and the basis for the award decision.

(3) BPAs for hourly-rate services. If the BPA is for hourly-rate services, the ordering activity shall develop a statement of work for each order covered by the BPA.

Ordering activities should place these orders on a firm-fixed price basis to the maximum extent practicable. For time-and-materials and labor-hour orders, the contracting officer shall follow the procedures at 8.404(h). All orders under the BPA shall specify a price for the performance of the tasks identified in the statement of work. The ordering activity is responsible for considering the level of effort and the mix of labor proposed to perform a specific task being ordered, and for determining that the total price is reasonable through appropriate analysis techniques, and documenting the file accordingly.

(d) Duration of BPAs.

(1) Multiple-award BPAs generally should not exceed five years in length, but may do so to meet program requirements.

(2) A single-award BPA shall not exceed one year. It may have up to four one-year options. See paragraph (e) of this section for requirements associated with option exercise.

(3) Contractors may be awarded BPAs that extend beyond the current term of their

GSA Schedule contract, so long as there are option periods in their GSA Schedule contract that, if exercised, will cover the BPA’s period of performance.

(e) Review of BPAs.

Page | 17

(1) The ordering activity contracting officer shall review the BPA and determine in writing, at least once a year (e.g., at option exercise), whether-

(i) The schedule contract, upon which the BPA was established, is still in effect;

(ii) The BPA still represents the best value (see 8.404(d)); and

(iii) Estimated quantities/amounts have been exceeded and additional price reductions can be obtained.

(2) The determination shall be included in the BPA file documentation.