42820365 data CLIN 0066.pdf
PDF 1005 KB Posted
- Attached to
- HOSE, AIR DUCT Federal contract opportunity
- Solicitation number
- SPMYM225Q0200
About this file
This document is a performance specification sheet for a round air duct elbow product that is part of a federal contract opportunity. The key details are:
The specification sheet provides requirements and dimensional details for round textile duct elbows in various sizes and angles. The elbow product is to be acquired under a firm-fixed price supply contract with the Federal Government. The anticipated solicitation will be a 100% small business set-aside using simplified acquisition procedures, with FOB Destination delivery to Bremerton, WA. Offerors must comply with the material specification provided, identify the manufacturer and country of origin, and address NIST SP 800-171 cybersecurity requirements if applicable. Quotes are due by 1 PM PDT on November 7, 2024 and must be submitted per the instructions in the related federal contract opportunity.
View the file
Other files for this federal contract opportunity
Show all 50
HOSE, AIR DUCT has more files on GovTribe.
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Copyright Naval Sea Systems Command (Ship Systems) Provided by Accuris Licensee=Puget Sound Naval Shipyard/5960068009, User=Andresen-Baker, Matthew No reproduction or networking permitted without license from Accuris Not for Resale, 10/06/2024 21:40:45 MDT
INCH-POUND
MIL-PRF-32107/3 27
June 2002
PERFORMANCE SPECIFICATION SHEET
HOSE, AIR DUCT
ELBOW, ROUND
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification and MIL-PRF-32107.
Copyright Naval Sea Systems Command (Ship Systems)
No reproduction or networking permitted without license from Accuris Not for Resale, 10/06/2024 21:40:45 MDT
AMSC N/A 1 of 5 FSC 4720
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
MIL-PRF-32107/3
Copyright Naval Sea Systems Command (Ship Systems)
No reproduction or networking permitted without license from Accuris Not for Resale, 10/06/2024 21:40:45 MDT
FIGURE 2. Elbow, Round, 90 Degrees
TABLE I. Dimensions.
Size
Angle of Elbow
A D E F L
Max Min Max Min Max Min Max Min Max Min
30 29 31 5.125
5.00
1.00
0.75
1.50
5.25 5.00 45 44 46 6.25 6.00 60 59 61 6.25 6.00 90 89 91 6.75 6.50
30 29 31 8.125
8.00
6.25 6.00 45 44 46 6.75 6.50
Copyright Naval Sea Systems Command (Ship Systems)
No reproduction or networking permitted without license from Accuris Not for Resale, 10/06/2024 21:40:45 MDT
60 59 61
7.25 7.00 90 89 91 8.25 8.00
30 29 31 10.125
10.00
6.75 6.50 45 44 46 7.25 7.00 60 59 61 7.75 7.50 90 89 91 9.25 9.00
30 29 31 12.125
12.00
7.25 7.00 45 44 46 7.75 7.50 60 59 61 8.25 8.00 90 89 91 10.25 10.00
Notes:
1. Dimension “A” is in degrees, all other dimensions are in inches.
2. Abbreviations: Max = Maximum; Min = Minimum.
3. The illustrations are for identification purposes only and are not intended to resist designs and shapes of textile duct, which conform to the requirements and are within the envelope dimensions.
4. Figures 1 and 2 depict Left bending elbows. Right, Up, and Down elbows are the same except for direction of bend.
PIN: Consists of the letter M, the basic number of the specification sheet, and a dash number compiled from the code.
Specification sheet number Dash number
M32107/3- 2 R 9 3 Size Direction of Elbow Degree Permeability Range
PIN CODE
Size (Nominal Diameter)
Direction of elbow
Degree
Permeability Range
1 – 5 Diameter R = Right 3 = 30 Degrees 1 = Permeability 5 2 – 8 Diameter L = Left 4 = 45 Degrees 2 = Permeability 15 3 – 10 Diameter U = Up 6 = 60 Degrees 3 = Permeability 20
Copyright Naval Sea Systems Command (Ship Systems) Provided by Accuris Licensee=Puget Sound Naval Shipyard/5960068009, User=Andresen-Baker, Matthew No reproduction or networking permitted without license from Accuris Not for Resale, 10/06/2024 21:40:45 MDT
4 – 12 Diameter D = Down 9 = 90 Degrees 4 = Permeability 25 5 = Permeability 40
REQUIREMENTS:
1. Round textile duct elbows shall be in accordance with Figure 1 or Figure 2 and Table I.
2. Material: See acquisition specification.
3. Zippers: See acquisition specification.
4. Color: See acquisition specification.
5. Permeability range: See acquisition specification.
CHANGES FROM PREVIOUS ISSUE: Not applicable
Custodian: Preparing activity:
Navy – SH Navy – SH (Project 4720-0334-03) Review activities:
Navy – NP, SA
DLA – CC
CIV – 7FXE
File details come from the government source that posted it. Updated .