40947900 MATERIAL ORDERING DATA.pdf
PDF 8 KB Posted
- Attached to
- PLATE METAL Federal contract opportunity
- Solicitation number
- SPMYM224Q1275
About this file
This document is Material Ordering Data for a federal contract opportunity. It references MIL-S-22698C Steel Plate, Shapes and Bars, detailing the required grade (DH-36), class (U-mill finish), and plate size (1-1/4" thick x 96" wide x 20' long). The ordering data indicates no first article is required and provides additional instructions for marking and packaging. The related federal contract opportunity is Solicitation Number SPMYM224Q1275 for Plate Metal, issued by the Defense Logistics Agency Land and Maritime. The solicitation is posted on SAM.gov and allows for electronic bid submission. It requires the contractor to comply with NIST SP 800-171 cybersecurity requirements, except for COTS items.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 4094-7900 CDRL EXHIBIT A.pdf | ||
| SPMYM224Q1275.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
MIL-S-22698
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 4094-7900
ICN: 88MSM00001 KO: 000 KOI: 000
Paragraph 6.2 Ordering Data
A. MIL-S-22698C, STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND
HIGHER STRENGTH: STRUCTURAL, dated 29 JUN 1988. AMENDMENT 1, dated 19 DEC 1988.
AMENDMENT 2, dated 20 OCT 1994. NOTICE 1, dated 8 SEP 1998. NOTICE 2, dated 30 AUG 2002.
NOTICE 3, dated 29 DEC 2020.
B. Grade specified: DH-36
C. Class required: Class U-mill finish (hot rolled or normalized)
D. Plate Size: 1-1/4" THK X 96" WD X 20' LG.
E. When first article is required: no
F. Dimensional tolerances required: N/A
G. When chemical composition is other than specified: N/A
H. When surface finish is other than Class P: Class U
I. Deviations in UT inspection method or UT acceptance criteria from Appendix A of grade T plate, shapes, and bars: N/A
J. Level of preservation, packing, and marking required: Commerical
Additional Data Requirements:
All unit, intermediate and shipping containers must be marked in accordance with MIL-STD-
129. Refer to DLA Procurement Note C20 for further instructions.
Prepared By: Willie Leach Code: 244.4
File details come from the government source that posted it. Updated .