VAPAHCS Statement of Work Sept 2021.pdf

PWS (VA PALO ALTO)

PERFORMANCE WORK STATEMENT (PWS)

VINYL COMPOSITION TILE (VCT) STRIPPING AND SEALING

1.) BACKGROUND

The VA Palo Alto Health Care System has Vinyl Composition Tile (VCT) flooring. Many areas with VCT flooring are in need of restoration. With the current healthcare environment and presence of COVID-19, the VCT in the public and patient hallway areas in of Palo Alto VA

Healthcare system need attention.

The porous nature of VCT needs to be stripped of wax and sealed with a high performance coating to prevent the spread of bacterial and viral infections. The existing flooring conditions pose a serious health risk that must be corrected immediately.

Conventional stripping and waxing is not an effective option for the current state of the VCT flooring at Palo Alto VA Healthcare system. Stripping and waxing does not provide sufficient sanitization and long-term protection for these public used areas. EMS Leadership has identified areas that need immediate attention.

There is approximately 77,340 square feet (ft ) of VCT Flooring.

CAMPUS BUILDING NAME TOTAL SQFT

PALO ALTO 7- SCI CENTER 10,788

PALO ALTO 9-DEFENDERS LODGE 7,488

PALO ALTO 100- HOSPITAL 15,468

PALO ALTO 100- HOSPITAL KITCHEN 7,208

PALO ALTO 101- ADMIN 840

PALO ALTO 500- POLYTRAUMA 10,064

PALO ALTO 520- Mental Health 6,012

PALO ALTO 530-Wellness Center 3,350

PALO ALTO HAC (Housekeeping Closets) 5,622

PALO ALTO TBD* 10,500 *Square footage to be dispersed at discretion of

VA. Usage will restore and sanitize tile & grout on vertical bathroom walls, and other priority areas

2.) SCOPE

The Contractor shall furnish to the Government all labor, supervision, supplies, tools and equipment, travel and services necessary to prepare and apply protective sealant to VCT flooring, to include the immediate 4 inches of cove base from the floor up to the wall. In addition, the Contractor shall provide restorative services, as requested, to maintain a ‘like new’ appearance of the VCT Flooring. All surfaces must be free of dirt, debris, odors and stains.

Services shall include, but are limited to: chemicals, restoration cleaning, coating removal, deep cleaning, scratch removal, and baseboard repair. The Contractor IS NOT required to repair loose or broken VCT tiles.

Contractor shall not only restore integrity of VCT flooring and baseboard surfaces, but also use a sanitizing agent in process to prevent the spread of COVID-19.

Information Technology (IT) Closets: The Contractor shall coordinate with the VA IT staff to gain access to these secured areas in order to sweep and dust mop floors monthly. The Contractor shall not use any type of liquids, vacuums or duster in these closets. The Contractor shall not unplug any IT equipment unless performed by IT staff. To maintain the proper air temperatures in the IT rooms, the entry doors shall not be left open.

Identification Tags/Cards. The Contractor shall wear on the front of the uniform, clearly readable name identification (ID) logo identifying the contractor’s and employee’s name. The Government will issue ID cards to the Contractor after background checks have been completed. The Contractor shall obtain

“Visitors’ Badges” during the interim period via VA Police or Human Resource Department.

3.) TASKS

3.1 Installation of sealant to VCT Flooring, as requested

3.1.1 Task includes all services necessary to strip, clean and prepare flooring

3.2 Restoration maintenance services of the VCT Flooring to maintain a “like new" appearance and the integrity of the floor finish, as requested

3.2.1 Task includes all services necessary to clean and prepare flooring for maintenance services

4.) DELIVERABLES

4.1 Provide installation services

4.2 Provide restoration maintenance services

4.3 Submit scheduling of work

4.4 Consultation services, as request

5.) RESTORATION SERVICE

5.1 Coating Removal: Existing Polymer coatings will be removed using Permatect’s DCR

(Durable Coating Remover) or equivalent. 100% of existing wax coatings must be removed to achieve bonding with new coating.

The VCT preparations shall leave no residue, chalk or grit when properly rinsed. A clear water flood rinse shall be applied to the floor and the residue removed by suction.

The rinse-aide shall be removed by suction and the floor is to be completely dried by means of a mechanically generated airflow. The contractor shall strip the floor surface until VCT is smooth, dry and clean, free of dirt, dust, oils, waxes or any other foreign matter which would interfere with a good bond.

5.4 Coating: The coating shall be Permatect’s V-Sheild interlocking siloxane inorganic protective barrier or equivalent. All VCT flooring shall be sealed with a coat of an Inorganic

Siloxane based Permanent Barrier Permatect’s “Proprius-One” or equivalent to provide impermeable seal over the entire treated area.

This shield shall have a high gloss shine appearance when it is dried. This product shall be inorganic with an oil, urine and water repellant compound with sufficient particle size of the emulsion and surfactant package to allow deep penetration of porous tiles substrates, and must have an adhesion mechanism which is both mechanical and chemical. The Permatect V-Shield sealant shall only be applied by a technician certified by Permatect Facility Solutions.

5.5 Downtime: All public used areas being serviced must be available for foot traffic every morning by 6 am.

5.6 Warranty: Service and process must carry a 2 year warranty that covers excessive wear, yellowing and delamination.