36C26118R0612-002.pdf

Manufacturer Model Number Description Qty

AMX AVS-ENOVADGX32-ENC-A 32 x 32 Modular Matrix Router Chassis 2 AMX AVS-ENOVADGX32-VI-HDMI HDMI Input Card 11 AMX AVS-ENOVADGX32-VI DXLINK Twisted Pair Input Board 10 AMX DM-MD 16X16 16 x 16 Modular Matrix Router Chassis 1 AMX AVS-ENOVADGX32-VO-HDMI HDMI Output Card 10 AMX AVS-ENOVADGX32-VO DXLINK Twisted Pair Output Board 7 AMX AVS-ENOVADGX32-AUD-INS-EXT Audio Insert/Extract Board 6 AMX AVB-WP-TX-MULTI-DXLINK-BL Twisted Pair Transmitter 5 AMX AVB-DWP-TX-MULTI-DXLINK-WH Wall Plate Transmitter w/ HDMI & VGA 27 AMX AVB-RX-DXLINK-HDMI Twisted Pair Receiver w/ Scaling 23 AMX NI-3100 Control System Processor 4 AMX MXT-1000 10" Capacitive Touch Panel - Include Table-Top Kit 6 AMX MXA-STMK-10 Secure Table Mount Kit 10.1" 6 AMX MXT-700 7" Capacitive Touch Panel - Include Table-Top Kit 3 AMX MXA-STMK-07 Secure Table Mount Kit 7" 3 AMX NXP-PLV Digital Joystikc Camera Controller 6

Vaddio 999-6947-100

WallView HD-19 CAT-5 Camera w/ Universal CCU there are:

a- 22 EA. Ceiling Mounted cameras item # 490 & b- 3 EA. Wall-Mounted cameras item # 390

Vaddio 535-2000-230 Thin Profile Wall Mount Bracket 3 TVOne C2-6104A Multi-Window Video Processor - DVI 11 TVOne C2-6204A Multi-Window Video Processor - HDSDI 4 VideoLogix Proteus II HD Video Overlay System 9 AJA IO XT HDMI to ThunderBolt Video Capture Engine 9 Biamp SERVER-IO Tesira Server Chassis 3 Biamp SEC-4 4 Channel mic/line input card w/ AEC 5 Biamp SIC-4 4 Channel mic/line input card 11 Biamp SOC-4 4 Channel mic/line output card 10 Biamp SCV-2 2-channel Voice over Internet Protocol card 2 Netgear GS724T FW ver 5.0 Netgear ProSave GS724T FW ver 5.0 (AVB enabled) 24 Port, 1GB 1 Cisco SF300-48P 48 Port Manged Ethernet Switch with POE 3 Cisco Aironet 2600i Wireless Access Point 6 Cisco 2500 Series Wireless Access Controller 1 Crown PZM-11 Professional Boundary Layer Microphone 22 Shure ULXP14/85 Lavalier Wireless System w/ WL185 Cardiod Lavalier Microphone 11 Shure UA844SWB Antenna Distribution System 4 Shure MX412D/C 12" Desktop Goosneck Microphone 6 Shure P9TRA Personal Monitor System 10 Shure PA421SWB Antenna Distribution System 4 Shure SE215 SE Headphones 10 Shure SRH240A Portable Headphones 9 Extron XPA 2001 200W 70V Amplifier 1 Extron MPA401 1 x 40W, 70V Amplifier 8 JBL Control 26C/T Two-Way Ceiling Loudspeaker with Integrated Back Can 28

Apple 15" MacBook Pro

15" Retna Display, 2.8Ghz Quad Core Intel Core i7 Processor 16GB SDRAM, 512 Flash Storage, Apple Care Protection Plan, Thunderbolt to Ethernet Adapter, Mini DisplayPort to VGA Adapter, Mini DsiplayPort to DVI Adapter, Additional Apple 85W MagSafe 2 Power Adapter, (3) Apple 2M Thunderbot Cables, Final Cut X

Lacie Little Big Disk 2TB External Hard Drive, Thunderbolt Connectivity 10

Lacie 5big NAS Pro 8TB RAID 5, (5) 2TB Drives) Network Attached Storage, Thunderbolt Connectivity, 2 Spare 2TB Drives and Housings 1

Spectracom 8230 GPS Antennea, including all cable, connectors, mounting, adapters, amplifiers and splitter as required 1

Spectracom 8226 GPS Surge Protector 1 Spectracom 9489 Network Time Protocal Server (NTPS) 1 E-RS016 E-RS016 16 Channel RS-485 Distribution Amplifier/Splitter 1 Middle Atlantic WRK44-32 32" Deep Gangable Equipment Cabinet 3 Middle Atlantic SPN-44-312 Side Panels 2 Middle Atlantic MW-4QFT-FC Fan Top w/ Thermostatic Controller 3 Middle Atlantic U1 U1 Rack Shelf 1 Panduit NK6PPG48Y 48 Port Network Patch Bay 5 APC 7930 Vertical Networked Power Distribution Unit - QTY As-Required 6

Mfr/Vendor Description Quantity

N/S Leviton 4-Gang Decora Wall Plate 80412-00W 29

N/S Leviton 2-Gang Decora Wall Plate White 80409-00W 30

Leviton 3-Port Mounting Strap Unloaded Decora Style Quickport White 41643-00W

Leviton 1-Port Wallplate Unloaded 1-Gang Use w/Snap-In Modules Quickport White 41080-1WP

Leviton jack AX1 C6 Shld YL 61SJK-RY6 343

Leviton 1-Port BNC Insert Quickport MOS White 41084-BWF 21

Leviton Decora Insert For Wallplate Plastic Adapter Blank White 80414- 00W

Leviton 1-Port Blank Insert Quickport White 10/Pk 41084-OBW 36

Leviton AV Passthru Decora WH 41075-DBW 10

Berk-Tek Cat6 FTP 4PR Alum Shield Plenm Yellow Jacket 10062608 1 PKG

Berk-Tek 24-4P STP-CMP SOL BC Cat5E FT-6 FEP/FRPVC Grey Jack O/A AL/MY SHD w/DW Reel 10032121

1 PKG

Belden CDT Patchord Cat6F CMR Blue 7FT C6F1106007 196

Belden CDT CBL Assy MOD 24 AWG 4PR Solid Cat6F T568A/B-T568A/B 10FT Blue

UA8100 RG231U/type antenna cable 100' 11

UA850 RG8X/U type antenna cable 50' 19

Legrand equivalant for Cable Wholesale P/N: 301-1004 STK # Legrand 2306-

70086-PLTM

Legrand equivalant for Cable Wholesale P/N: 301-1003 STK # Legrand 2306-

70086-PLTF

DVI-DVI-6PROBLK Pro AV/IT Series 26 AWG DVI-D Dual Link Cable 6ft 64

DVI-DVI-12PROBLK Pro AV/IT Series 26 AWG DVI-Dual Link Cable 12ft 13

HD-HD-3PROBLK Pro AV/IT High Speed HDMI Cable with ProGrip SureLength CL3-Black 3ft

HD-HD-6PROBLK Pro AV/IT High Speed HDMI Cable with ProGrip SureLenght CL3-Black 6ft

HD-HD-12PROBLK Pro AV/IT High Speed HDMI Cable with ProGrip SureLength CL3-Black 12ft

BBD1694-6B Premium Belden 1694A Digital Video BNC Cable 6ft 28

Shure

Belden

Berk-Tek

Leviton

Comprehensive

Cable Wholesale

BBD1694-10B Premium Belden 1694A Digital Video BNC Cable 10ft 13

BBD1694-50B Premium Belden 1694A Digital Video BNC Cable 50ft 6

West Penn Part 25291B 22 Awg 1 Pair Shielded Straded Plenum Jackt 1000ft

West Penn 18/2 Stranded bare copper conductors, unshielded with an overall jacket

Synnex UN75KS9000FXZA Samsung 75" LED Flat S-Ultra HDTV 4623951 2

Synnex UN65KS9000FXZA Samsung 65" LED Flat S-Ultra HDTV 4498500 1

Synnex N55KS9000FXZA Samsung 55" LED Flat S-Ultra HDTV 4498501 7

Synnex UN43J5200FXZA 422016 3

SFL670 Peerless Flat Wall Mount Tech Data 11 514141 10

SAL746 Peerless Articulating Wall Mount Tech Data 11 292348 3

Additional - Compr Vide VDI-DVI-6ProBlk Cbl Assy Pro AV/IT Series 26AWG DVI-D-Dual Link Blk 6Ft STK# 678404

Compr Vide HD-DVI-6ProBlk Pro AV/IT Series HDMI to DVI Cable Network Grade CL3 Rated Pro Grip 6' Blk STK# 602141

Cisco 5-Port Unmanaged Ethernet Switch - Cisco SF110D-05 5PT 10/100 DT

SWCH STK# SF110D-05-NA.VA (1).

West Penn

Comprehensive

Belden

Samsung

Peerless

Architects’ and Engineers’ Specifications

96-052 / rev 5e / 03-22-11 / WRK Series Gangable Enclosure

The WRK Series 19” gangable enclosure accommodates large cable bundles

EIA compliant 19” gangable equipment rack shall be Middle Atlantic Products model # WRK-__- __(see chart for available models). Overall dimensions of rack shall be __” H x 24-1/4” W x __” D (refer to chart). Useable height shall be __ rackspaces, useable depth shall be __” (refer to chart). Fully welded construction shall provide a static load capacity of 10,000 lbs. and a UL Listed 2,500 lb. weight capacity. Rack shall be constructed of the following materials: top and bottom shall be 14-gauge steel, horizontal braces shall be 16-gauge steel welded to integral structural side panels of 16-gauge steel giving an 1/8” thick structure, all structural elements shall be finished in a durable black powder coat. Rack shall include locking, latching rear door. Rack shall come equipped with two pairs of 11-gauge steel rackrail with tapped 10-32 mounting holes in universal EIA spacing. Finished in black e-coat with numbered rackspaces. Top and bottom of rack shall have a vertical slotted vent pattern. Rack shall have removable split rear knockout panels with 1/2”, 3/4”, 1”, and 1-1/2” electrical knockouts installed in base, and removable split rear knockout panels with 1/2”, 3/4”, 1”, and 1-1/2” electrical knockouts, and BNC knockouts for UHF/VHF antennae installed in top. Grounding and bonding stud shall be 1/4-20 threaded, installed in base of enclosure. WRK Series enclosures shall satisfy the 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity, Seismic Use Group III, Zone 4 or Seismic Design Category (SDC) “D” with lateral force requirements for protecting 900 lbs. of essential equipment in locations with the highest level of seismicity and top floor or rooftop installations with an Importance factor (Ip) of 1.5 when used with WRK-Z4 seismic floor anchor bracket. Rack shall be UL Listed in the US and Canada. Rack shall be GREENGUARD Indoor Air Quality Certified for Children and Schools. Rack shall be RoHS EU Directive 2002/95/EC compliant. Rack shall be manufactured by an ISO 9001 and ISO 14001 registered company. Rack shall be warrantied to be free from defects in material or workmanship under normal use and conditions for the lifetime of the rack.

OPTIONS

• Front doors shall be 16-gauge reinforced steel, model # FD-XX (solid), VFD-XX (vented, 25% open area), LVFD-XX (vented, 64% open area), PFD- XX(plexi), PVFD-44 (vented plexi) (X=# of rackspaces of WRK rack)

• Vented rear doors shall be 16-gauge steel model # MW-VRD-44 (vented, top and bottom), MW-LVRD-XX (vented 64% open area-excludes 24 and 37 space rack), (X= # of rackspaces of WRK rack), MW-CLVRD-44 (split rear door, vented, 79% open area)

• Removable keylocked side panels shall be model # SPN-XX-YY (X = # of rackspaces, Y = cabinet depth)

• Top panels multiple styles available in model # MW-ST (solid), #MW-10FT (10” fan), MW-4FT (four 4-1/2” fans), MW-6FT (three 6” fans), MW-VT (vented) and MW-LA (accepts 6” & 12” wide cable ladders) see A&E spec 96-01063 for more details

• Caster base, four casters shall have a total weight capacity of 1300 lbs, model # CBS-WRK-YY (Y= cabinet depth)

• Inner platform base (inset base w/out casters) model # BS-WRK-YY (Y= cabinet depth)

• Leveling feet model # LF, shall be 3/8” threaded steel, adjustable from top or bottom, adds 1/4” min. to 1” max. to rack overall height

• Additional rail kit, 11-gauge, 10-32 threaded, sold in pairs, hardware included, model # WRK-RRXX (X= # of rackspaces)

• AXS slide out option available (See AXS Spec sheet 96-052S)

WRK-44-32

96-052G / rev 5e / 03-22-11

• Fully welded construction provides the following weight capacities - UL Listed load capacity: 2,500 lbs - Static load capacity: 10,000 lbs. - Seismic certified load capacity: 900 lbs.

• 1/8” thick structural steel internal braces

• 24-1/4” OD width, available 27-5/8” or 32-5/8” OD depth

• 1/2”, 3/4”, 1” & 1-1/2” electrical knockouts on split rear plates top & bottom, easily removable for cable pass-through, top plates additionally include UHF / VHF knockouts

• 2 extra-wide pairs of 11-gauge 10-32 threaded rackrail with numbered rackspace increments

• Optional solid, fully vented, plexi & vented plexi doors

• Open top with configurable top panel options

• Durable black textured powder coat finish

• Seismic certified (when used with WRK-Z4 option) with an Ip value of 1.5

• UL Listed in the US and Canada

Enclosure Accessories

ADDITIONAL RACKRAIL KIT

CASTER BASE

COPPER BUSS BAR

CRATING SERVICE

DOCUMENT POCKET

DOOR LATCH

GANGING HARDWARE

INNER PLATFORM BASE

LEVELING FEET

TOUCH-UP PAINT

SEISMIC FLOOR ANCHOR BRACKETS

CONFIGURABLE TOPS

TOP RAILS

UNIVERSAL FRONT DOORS

UNIVERSAL VENTED REAR DOORS

for details - see Master Catalog or visit middleatlantic.com

SEISMIC CERTIFIED

Features

EXCEPTIONAL SUPPORT & PROTECTION™

C U S TO M I Z A B L E S P E C I F I C AT I O N C L I P S AVA I L A B L E AT M I D D L E AT L A N T I C .C O M

US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca

EIA/TIA Compliant

WRK Series Enclosure

WRK basic dimensions removable split EKO plates

REAR VIEW, TOP & BOTTOM

TOP VIEW BOTTOM VIEW

SIDE VIEW FRONT VIEWREAR VIEW

24.25 [616]

2.13 [514] 8.41

[214]

1.50 [38]

5/8” [16] dia. KO for UHF/VHF Antenna 1/2” [13] & 3/4” [19]

EKO

1” [25] & 1-1/2”

[38] EKO

22.88 [581]

1.5 [38]

19.50 [495]

24.25 [616]

C

E 21.13 [537]

1/4 - 20 x 1” [25.40] grounding and bonding stud (1 place only)

A B C D E

OVERALL USEABLE OVERALL USEABLE BASE

Part # HEIGHT HEIGHT DEPTH DEPTH OPENING DEPTH

WRK-44-27 83.13 [2111] 77.13 [1959] 27.63 [702] 25.75 [654] 24.50 [622]

WRK-40-27 76.13 [1934] 70.13 [1781] 27.63 [702] 25.75 [654] 24.50 [622]

WRK-37-27 70.88 [1800] 64.88 [1648] 27.63 [702] 25.75 [654] 24.50 [622]]

WRK-24-27 48.13 [1222] 42.13 [1070] 27.63 [702] 25.75 [654] 24.50 [622]

WRK-44-32 83.13 [2111] 77.13 [1959] 32.63 [829] 30.75 [781] 29.50 [749]

WRK-40-32 76.13 [1934] 70.13 [1781] 32.63 [829] 30.75 [781] 29.50 [749]

WRK-37-32 70.88 [1800] 64.88 [1648] 32.63 [829] 30.75 [781] 29.50 [749]

WRK-24-32 48.13 [1222] 42.13 [1070] 32.63 [829] 30.75 [781] 29.50 [749]

B A

FLOOR MOUNTING

LOCATIONS

19.38 [492]

2.44 [62]

WRK-XX-27=22.75 [578]

WRK-XX-32=27.75 [705]

WRK-XX-27=25.75 [654]

WRK-XX-32=30.75 [781] .94

[24]

22.38 [568]

3.00 [76]

REAR FRONT

C front rail setback .75 [19]

TOP SIDE

SECTIONAL VIEW

US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca

All dimensions in inches unless otherwise noted [All dimensions in brackets are in millimeters]

D

8x O 0.44 [11]

TOP OPTIONS removable plate opening accommodates 2 space panel

MW-10FT accepts 10” fan

MW-10FT-550CFM

includes 10” fan MW-10FT-FC includes 10” fan and fan controller

( ) accommodates 12” and 6” width cable ladders

MW-6FT accepts 6” fans

MW-6FT-660CFM

includes 6” fans

MW-4FT accepts 4-1/2” fans

MW-4FT-380CFM

includes 4-1/2” fans MW-4QFT-FC includes 4-1/2” quiet fans and fan controller

MW-ST solid MW-VT slot vent

MW-LVT 64%

open area

MW-LA accepts 6”, 9” and 12” width cable ladder

Middle Atlantic Products

96-01063 / rev 2b / 08-15-11 / Fan Options

Control temperature within an enclosure with fan options and accessories

96-01063 / rev 2b / 08-15-11

Fan Options

FAN

QFAN

• 115V fan rated at 95 CFM

• 39 dBA (measurements made 1 meter from source, centered horizontally and vertically)

• Smooth, long life ball-bearing design

• UL Recognized in the US and Canada

• Used in:

- KO-AWFP2, selectively vented rear door knockout fan panel and HDR-FAN (See A&E Spec # 96-975)

- DLBX (A&E Spec # 96-01008) DVR lockbox and VLBX (A&E Spec # 96-942) VTR lockbox

- MW-4FT-380 CFM and ERK-4FT-285CFM fan tops

• 115V fan rated at 50 CFM

• <30 dBA (measurements made 1 meter from source, centered horizontally and vertically)

• Quiet fan includes fan guard with black powder coat finish

• Smooth, long life ball-bearing design

• UL Recognized in the US and Canada

• Used in:

- QFP-1 (one fan) and QFP-2 (two fans) black anodized fan panels; QTFP-1 and QTFP-2 black textured powder coat fan panels

- MW-4QFT-FC* (four fans) and ERK-4QFT-FC (three fans) integrated fan tops with thermostatic fan control

- SCQ Series* monitoring consoles (A&E Spec # 96-989) and SCQRK Series* enclosures (A&E Spec # 96-995)

- Edit Center multimedia studio furniture (See Master Catalog)

* SCQ Series, SCQRK Series and integrated fan tops are UL Listed in the US and Canada

• 115V fan rated at 220 CFM

• 49 dBA (measurements made 1 meter from source, centered horizontally and vertically)

• Smooth, long life ball-bearing design

• UL Recognized in the US and Canada

• Used in:

- MW-6FT-660CFM and ERK-6FT-440CFM fan tops

FAN

QFAN

FAN-6

FAN-6

EXCEPTIONAL SUPPORT & PROTECTION™

Middle Atlantic Products

C U S TO M I Z A B L E S P E C I F I C AT I O N C L I P S AVA I L A B L E AT M I D D L E AT L A N T I C .C O M

US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca

• 115V fan rated at 550 CFM

• 49 dBA (measurements made 1 meter from source, centered horizontally and vertically)

• Smooth, long life ball-bearing design

• UL Recognized in the US and Canada

• Used in:

- MW-10FT-FC* and ERK-10FT-FC* integrated fan tops with thermostatic fan control

- MW-10FT-550CFM and ERK10FT-550CFM fan tops

* Integrated fan tops are UL Listed in the US and Canada

• 115V fan rated at 825 CFM

• 60 dBA (measurements made 1 meter from source, centered horizontally and vertically)

• Maximum cooling for enclosures with high heat density

• Smooth, long life ball-bearing design

• UL Recognized in the US and Canada

• 115V fan rated at 57 CFM

• 30 dBA (measurements made 1 meter from source, centered horizontally and vertically)

• Slim design fits AXS Series rack

• Smooth, long life ball-bearing design

• UL Recognized in the US and Canada

• AXS-FAN-K available, includes two fans (33 dBA, 114 CFM)

• Overtemp and fan failure notification via contact closure

• 100 CFM in 4 fan units, 50 CFM in 2 fan units

• Minimal friction, long-lasting hydrowave-bearing design

• UL Listed power supply with 6’ cord

• See Ultra Quiet Fan Panel A&E Spec # 96-01037

• Quiet operation, 27 dBA at full speed for 4 fan models, 24 dBA at full speed for 2 fan models

• Temperature display, LED indicators and designer-inspired aesthetic treatments available

• Fan speeds proportional to temperature of enclosure to extend fan life, reduce dust and maintenance

UQFP-4D

UQFP Series Ultra Quiet Fan Panel

AXS-FAN

AXS-FAN

FAN-10

BMF-FAN10

BMF-FAN10

FAN10

Specifications for Fan Options

MODEL # SIZE

VOLTAGE

(V)

CURRENT

(mA)

SPEED

(RPM)

NOISE

(dBA)

STATIC

PRESSURE

(In H2O)

AIRFLOW

(CFM)

QFAN 4.69” x 4.69” x 1.5” [119 x 119 x 38] 115 80 1450 <30 0.07 50

FAN 4.69” x 4.69” x 1.5” [119 x 119 x 38] 115 190 2750 39 0.26 95

FAN-6 6.77” x 5.91” x 1.5” thk [172 x 150 x 38 thk] 115 420 2900 49 0.6 220

FAN-10 10” dia. x 3.5” thk [254 dia. x 89 thk] 115 500 1650 49 0.365 550

AXS-FAN 4.69” x 4.69” x 1.0” [119 x 119 x 38] 115 90 2300 30 0.09 57

BMF-FAN10 10” dia. x 4.25” thk [254 dia. x 108 thk] 115 1300 2400 60 0.405 825

Mounting hole dimensions for BMF-FAN10 and FAN-10

9.25 [235]

9.69 [246]

.17 [4] dia.

8 holes equally spaced on

9.687 [246] dia.

45O

.18 dia. [5]

1.125 [29]

4.125 [105]

4.56 [117]

4.56 [117]4.125

[105]

Middle Atlantic Products, Inc.

Mounting hole dimensions for

QFAN, FAN, AXS-FAN

All dimensions in inches unless otherwise noted [Bracketed dimensions are in millimeters]

US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca

Mounting hole dimensions for

FAN-6

.18 [5] dia. 2 holes

6.375 [162]

5.75 [146]

5.95 [151] dia.

No vent in Rack Face!

Avoid vented rack panels in upper 6 spaces of rack

Blank panels

FRONT

Rack fan CFM should equal or exceed combined equipment fan CFM. If not, avoid the use of vents between amplifiers and other high heat equipment

No upper vents in rack sides

No Vent!

Solid rear door

Rack Fan

SIDE VIEW

Quick guide to proper thermal management

For more information, download the Thermal Management White Paper at middleatlantic.com

PROPER

Forced Air with front-intakes on equipment

WRONG

Forced Air with front-intakes on equipment

Fan

Vented Rack Face

Partially vented Rear Door

SPECIFICATION

Patch panels shall feature a 1RU/48-port design that ts industr -standard 1 e uip ent rac Panels shall acco odate ost uic Port connectors Panels shall e U isted Panel shall e constructed of die-cast alu inu and feature a dura le po der-coat nish a el holder shall include agni cation feature for port identi cation

FEATURES

48-port densit in onl 1RU of rac space

• Patented design

• Ro ust die-cast alu inu construction

• ncludes a le anage ent ar additional ars a aila le separatel

• ulti-color card stoc for identi cation options

• a el holders agnif la els for eas reading

DESIGN CONSIDERATIONS

• ust follo instruction sheets included ith each panel

• Panel supports 48-ports in 1RU of rac space

• ounts on industr -standard 1 e uip ent rac

• aila le in a ariet of categor ratings and ill acco odate ost uic Port connectors

• Reco end ac s e ter inated prior to installation in panel

• Reco end use of ca le anage ent ar to support ul and eight of ca les

• esign allo s for front ca le anage ent using no additional rac space

• pt panels a aila le for retro ts

• rientation of top-ro connectors is rotated 18 o

STANDARDS COMPLIANCE

cULus Listed

PHYSICAL SPECIFICATIONS

i ensions ee page aterials lu inu po der-coated lac apacit 48-port

COUNTRY OF ORIGIN

U

WARRANTY INFORMATION

or a cop of Le iton product arranties isit le iton co / arrant

APPLICATION

he uic Port igh- ensit Patch Panel supports 48 ports hile lling onl 1RU of rac space t is a aila le unloaded to support a ariet of net or re uire ents and t all industr -standard 1 rac s and ca inets n e cellent choice for oth retro ts and ne installations each it includes one patch panel la els a la el holder and a ca le anage ent ar

PRODUCT SPECIFICATIONS

49255-D48, 49005-DMB

QuickPort® High-Density Die Cast Flat Patch Panel with Cable Management Bar

49255-D 48, 49005-D

M B

Page 1 of

Leviton Network Solutions

- nd t othell 8 1-441 tel 1-8 -8 4-tel 1-4 -48 -appeng le iton co le iton co

Asia Paci c T 1 1 81 8 E infoasean le iton co

Canada T 1 14 4 184 E pcser ice le iton co

Caribbean T 1 4 18 E infocari ean le iton co

China T 8 4 8 E infochina le iton co

Colombia T 1 4 4 E infocolo ia le iton co

Europe T 88 1 8 E infoeurope le iton co

India / SAARC T 1 8 4 8 E infoindia le iton co

Mexico T 8 1 4 E lsa ar eting le iton co

Middle East & Africa T 1 4 88 4 E l einfo le iton co

South Korea T 8 E info orea le iton co op right 1 Le iton anufacturing o nc ll rights reser ed u ect to change ithout notice Released a 1

PRODUCT SPECIFICATIONS

49255-D48, 49005-DMB

49255-D 48, 49005-D

M B

1 4

ELECTRONIC FILES

or les t pical specs or technical dra ings isit le iton co

Page of

PART NUMBERS

Description Part No.

uic Port igh- ensit ie ast lat 1RU Patch Panel Unloaded includes a le anage ent ar 4 - 48 igh- ensit a le anage ent ar 4 -

Leviton Network Solutions

- nd t othell 8 1-441 tel 1-8 -8 4-tel 1-4 -48 -appeng le iton co le iton co

Asia / Paci c T 1 1 81 8 E infoasean le iton co

Canada T 1 14 4 184 E pcser ice le iton co

Caribbean T 1 4 18 E infocari ean le iton co

China T 8 4 8 E infochina le iton co

Colombia T 1 4 4 E infocolo ia le iton co

Europe T 88 1 8 E infoeurope le iton co

India / SAARC T 1 8 4 8 E infoindia le iton co

Mexico T 8 1 4 E lsa ar eting le iton co

Middle East & Africa T 1 4 88 4 E l einfo le iton co

South Korea T 8 E info orea le iton co op right 1 Le iton anufacturing o nc ll rights reser ed u ect to change ithout notice Released a 1

Patch Panel a le anage ent ar

SPECIFICATION

FEATURES

DESIGN CONSIDERATIONS

STANDARDS COMPLIANCE

PHYSICAL SPECIFICATIONS

COUNTRY OF ORIGIN

WARRANTY INFORMATION

ELECTRONIC FILES

APPLICATION

PRODUCT SPECIFICATIONS

49253-xxx, 4925C-xCM

Five-Ring Horizontal Cable Managers

49253-xxx, 4925C -xC

M

Leviton Network Solutions

T E

Canada T E

Caribbean T E

China T E

Colombia T E

Europe T E

India / SAARC T E

Mexico T E

Middle East & Africa T E

South Korea

PRODUCT SPECIFICATIONS

49253-xxx, 4925C-xCM

49253-xxx, 4925C -xC

M

PART NUMBERS

Description Country of Origin Part No.

Leviton Network Solutions

Canada T E

Caribbean T E

China T E

Colombia T E

Europe T E

India / SAARC T E

Mexico T E

Middle East & Africa T E

South Korea T E

4.50

4.00

3.50

19.00

1.72

2.50

4.00

3.50

4.50

6.00

6.00

3.47

19.00

19.00

3.47

1.72

19.00

3.47

19.00

© 2015 AMX. All rights reserved.

DATA SHEET

Enova® DGX 3200 Enclosure

DGX3200-ENC (FG1061-32)

Overview The new Enova DGX 3200 Enclosure (DGX3200-ENC) is a Digital Media Switcher that is ready to support 4K and Ultra High Definition (UHD) content. This robust solution includes a NetLinx® NX Integrated Controller, redundant power supplies and can be populated with Enova DGX video input and output boards in addition to optional audio -switching boards. There are four connections per video board, and each enclosure holds eight video input boards and eight video output boards for a maximum matrix of 32x32.

The Enova DGX 3200 adds several new capabilities such as automatic setup of DXLink endpoints, single IP addressing for multiple endpoints, and a new web interface to greatly simplify installation and configuration. The new advanced Audio Switching Boards add audio breakaway capabilities and parametric EQ on each DGX output.

The Enova DGX 3200 is far beyond a modular media switcher with built-in controller – it functions as the centerpiece of a complete integrated solution that manages and distributes analog and digital audio and video including HDMI/HDCP, control and Ethernet. Easily integrate HDCP into system designs and enjoy hassle-free plug-and-play operation. No tools, no delays and no key constraints – it just works with AMX's exclusive InstaGate Pro® Technology. Built for today's and tomorrow's needs, a comprehensive set of Enova DGX boards can be used in conjunction with DXLink and DGX Transmitters and Receivers to provide an end-to-end distribution system over twisted pair cable or fiber. An integrated NetLinx NX Controller and embedded Ethernet switch enables management of the entire solution including source equipment and display devices located throughout the environment – all from a single point of control.

In addition to eliminating HDCP delays, InstaGate Pro allows traditionally key limited sources to be switched freely to all connected HDCP compliant displays – eliminating HDCP key limitations that plague large applications. Built-in SmartScale® Technology on every output provides video that is perfectly scaled for each connected display, eliminating the integration challenges that can occur when sources and displays have different supported resolutions – making it easy to specify, easy to install and easy to use. With the powerful combination of analog-to-digital signal conversion, video scaling and high speed digital switching the system delivers perfect video every time – regardless of signal type.

As part of a complete distribution system, easily send analog or digital audio and video including HDMI with HDCP signals, plus control 10 Km over single mode fiber or 300 meters over multimode fiber; send all this plus power up to 100 meters over standard twisted pair cable to and from the Enova DGX using the DXLink Twisted Pair and Fiber Transmitters/Receivers.

Common Applications Enova DGX is ideal for dramatically simplifying AV control and distribution in large spaces such as lecture halls, auditoriums, hotel ballrooms, casinos, museums and stadiums/arenas.

The Enova DGX is ideally suited for multi-room or configurable room applications, where multiple collaboration spaces share a single DGX for control.

Enova DGX fiber capabilities enable transport of audio, video and control up to 10 Km making it a perfect solution for tall buildings with multiple floors, large campuses with multiple buildings or large facilities such as a factory.

Enova DGX fiber solutions provide secure distribution of content for applications which data security is critical such as government, banking/finance or network operation centers.

Features HDMI/HDCP Switching – End-to-end distribution of HDMI/HDCP without interruption or key constraints using InstaGate Pro® Technology 4K and Ultra High Definition (UHD) Content Ready – Designed to support future resolutions for years to come HDCP Compliance Over Fiber – Compatible DXLink Fiber boards transmit uncompressed video, including HDCP protected content, up to 10 Km at 10 Gbps (single mode fiber options transmit 10 Km, multimode 300 m) Fiber Your Way – DXLink Fiber boards are available in single mode or multimode; simplex or duplex AV and Control over Twisted Pair, Fiber or Both – Send audio, video, bi-directional control and Ethernet over twisted pair or fiber cable, or integrate both into the same system Embedded NetLinx NX Integrated Control Processor – Allows any connected device to be managed, monitored or controlled Integrated Ethernet Switch – Pass Ethernet through the attached DXLink Twisted Pair or Fiber Transmitters and Receivers Analog to Digital Video Conversion with Scaled Outputs – Converts any source signal to digital and uses SmartScale Technology to automatically output video that is perfectly scaled for each connected display Onboard Web Configuration for all Aspects of the DGX System – Greatly simplifies the setup and configuration of Enova DGX systems including DXLink endpoints drastically reducing installation time Automatic Setup of DXLink Endpoints – Simplified installation by auto-discovering DXLink devices when they are connected to an Enova DGX Single IP Address Required for Multiple Endpoints – Reduces the need for IT administrators to provision numerous IP addresses across the system for transmitters and receivers Unrivaled Network Security: Dual NIC – The LAN port is used to connect the master to an external network, and the ICSLAN ports connect to AMX or third-party AV equipment isolated from the primary network, providing rock-solid security Independent Routing of Audio and Video Using Audio Switching Boards – Provides increased flexibility to combine and separate audio from video in a variety of applications AxLink Port – Makes it easier to connect AxLink devices like keypads directly to the Enova DGX InstaGate Pro Technology – Easily integrate HDCP into system designs and enjoy hassle-free matrix switching to all compliant displays. No tools, no delays, and no key constraints – it just works

SmartScale Technology – Automatically responds to the display's declared EDID information and scales the video to the best resolution and video parameters for that display without manual setup; this prevents inferior video quality when sources are forced to lower resolutions to support the least capable display in the system DXLink Twisted Pair Input and Output Boards – HDCP Compliant boards send audio, video, control, Ethernet and power over one standard twisted pair cable up to 200 m – 100 m to the matrix switcher and 100 m after the matrix switcher, see the Cabling for Success with DXLink white paper for more details Easily Convert Analog to Digital Signals – Use the Enova DGX Digital Media Switcher in conjunction with DXLink Multi-Format Transmitters (Twisted Pair or Fiber), and easily integrate legacy analog sources and automatically convert their signals to digital Hot Swappable Video Input / Output Boards – Easily add or replace I/O boards at any time after deployment

- the system automatically recognizes the new configuration and activates the boards 3D Support – Pass through latest video formats including 3D and Deep Color Surround Sound Support – Pass through high definition surround sound including Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, and 2-channel through 8-channel L-PCM High Speed Digital Switching – 12.8 Gbps ensures perfect pixel for pixel reproduction of video Fully Redundant Power Supplies With Independent Power Paths – Ensures maximum reliability for applications that require 24/7 uptime

Specifications

GENERAL

Supported Signal Styles/ Compatible Input and Output Boards

•DGX-I-HDMI, Enova DGX HDMI Input Board (FG1058- 540) •DGX-O-HDMI, Enova DGX HDMI Output Board

(FG1058-550)

•DGX-I-DVI, Enova DGX DVI Input Board (FG1058-600) •DGX-O-DVI, Enova DGX DVI Output Board (FG1058- 610) •DGX-I-DXL, Enova DGX DXLink Twisted Pair Input Board (FG1058-570) •DGX-O-DXL, Enova DGX DXLink Twisted Pair Output Board (FG1058-580) •DGX-I-DXF-MMD, Enova DGX DXLink Multimode Fiber Input Board, Duplex (FG1058-622) •DGX-O-DXF-MMD, Enova DGX DXLink Multimode Fiber Output Board, Duplex (FG1058-632) •DGX-I-DXF-MMS, Enova DGX DXLink Multimode Fiber Input Board, Simplex (FG1058-623) •DGX-O-DXF-MMS, Enova DGX DXLink Multimode Fiber Output Board, Simplex (FG1058-633) •DGX-I-DXF-SMD, Enova DGX DXLink Single Mode Fiber Input Board, Duplex (FG1058-620) •DGX-O-DXF-SMD, Enova DGX DXLink Single Mode Fiber Output Board, Duplex (FG1058-630) •DGX-I-DXF-SMS, Enova DGX DXLink Single Mode Fiber Input Board, Simplex (FG1058-621) •DGX-O-DXF-SMS, Enova DGX DXLink Single Mode Fiber Output Board, Simplex (FG1058-631) •DGX-AIE, Enova DGX Audio Insert / Extract Board for Enova DGX 8/16/32/64 (FG1058-705) •DGX3200-ASB, Enova DGX Audio Switching Board for Enova DGX 3200 (FG1061-732)

•PRODUCT PREVIEW, NOT RELEASED: DGX-I-HDMI-4K,

Enova DGX 4K HDMI Input Board (FG1061-540)

•PRODUCT PREVIEW, NOT RELEASED: DGX-I-DXL-4K,

Enova DGX 4K DXLink Twisted Pair Input Board

(FG1058-570)

•PRODUCT PREVIEW, NOT RELEASED: DGX-O-DXL-4K

Enova DGX 4K DXLink Twisted Pair Output Board

(FG1061-580)

Note: Use fiber duplex models for bidirectional control over fiber. Simplex models do not support control transport over fiber; although when used as part of a complete Enova DGX solution, control can be provided if a supplemental independent network connection is used. See the "Instruction Manual – Enova DGX

Digital Media Switchers" for details.

Dimensions (HWD) •Without Extractors, With Mounting Ears: 10 1/2" x

19" x 20" (26.54 cm x 48.3 cm x 51 cm) •With Extractors and Mounting Ears: 10 1/2" x 19" x 21" (26.54 cm x 48.3 cm x 53.54 cm)

Rack Units 6 Weight •Approximately 73 lbs (33.1 kg) per loaded enclosure

•Shipping Weight: Approximately 83 lbs (37.6 kg) per loaded enclosure

Regulatory Compliance FCC CFR Title 47 Part 15 Subpart B Class A CE EN 55022 Class A

CE EN 55024

CE EN 60950-1

IEC 60950-1

CSA 60950-1

ICES-003 Class A

UL 60950-1

RoHS

WEEE

MTBF 92,000 hours Recommended Accessories •EXB-IRS4 ICSLan IR/S Interface, 4 IR/S and 4 Inputs

(FG2100-23)

•EXB-COM2 ICSLan Serial Interface, 2 Ports (FG2100- 22) •EXB-REL8 ICSLan Relay Interface, 8 Channels

(FG2100-20)

•EXB-I/O8 ICSLan Input/Output Interface, 8 Channels

(FG2100-21)

•EXB-MP1 ICSLan Multi-Port, 1 COM, 1 IR/S, 2 I/O, 1 IR

RX (FG2100-26)

•CBL-HDMI-FL HDMI High Speed Flat Cable with RedMere Technology (FG10-2180-16) •CBL-RGB+A-FL RGB with Audio Flat Cable (FG10- 2183-16) •DGX8/16/3200-CPU, Enova DGX CPU Replacement Kit For Enova DGX 800/1600/3200 (FG1061-132K) •ENOVADGX-P1-PS, 850 W Power Supply Replacement

(FG1058-130K)

•FAN REPLACEMENT KIT (FG1060-110K)

•BATTERY REPLACEMENT KIT (FG1060-120K)

Note: Compatible boards are listed above under "supported signal styles/compatible input and output boards". Transmitter, Receiver and Digital Switcher compatibility is dependent on board selection, please see the data sheet for the selected board for compatible Transmitters, Receivers and Digital Switchers.

Per Channel Aggregate Data Rate (Max) 12.8 Gbps Noise Level < 52.5 dBA @ 1m (Typical @ 25°C) Airflow Forced Air (inlet on sides, exhaust on back & top)

AC POWER REQUIREMENTS

AC Power 100-240 VAC single phase, 50-60 Hz Power Capacity (Max) •1320 Watts, with redundancy @ 110 VAC

•1730 Watts, with redundancy @ 230 VAC •2640 Watts, without redundancy @ 110 VAC •3459 Watts, without redundancy @ 230 VAC

Power Consumption (Max) 1692 Watts, fully loaded DXLink Power enclosure with redundancy

Use the Enova DGX Configuration Tool located at AMX.com/enova to determine the power requirements of a configuration and whether any of the DXLink Twisted Pair Transmitters or Receivers should be powered with the local power supply to maintain PS redundancy in the Enova enclosure

Power Consumption (Typ) 585 Watts, fully loaded HDMI enclosure with redundancy

Power Factor Correction Supported, Complies with EN60555-2 and EN61000-3-

2TBA

ENVIRONMENTAL

Temperature (Operating) 32° to 104° F (0° to 40° C) Temperature (Storage) -22° to +158° F (-30° to +70° C) Humidity (Operating) 5% to 85% RH (non-condensing) Humidity (Storage) 0% to 90% RH (non-condensing) Heat Dissipation (Typical) 1998 BTU/hr, fully loaded HDMI enclosure with redundancy Heat Dissipation (Max) •4508 BTU/hr, with redundancy @ 110 VAC

•5908 BTU/hr, with redundancy @ 230 VAC •9016 BTU/hr, without redundancy @ 110 VAC •11813 BTU/hr, without redundancy @ 230 VAC

Heat Dissipation (Max) 5778 BTU/hr, fully loaded DXLink Power enclosure without redundancy

Use the Enova DGX Configuration Tool located at AMX.com/enova to determine the power requirements of a configuration and whether any of the DXLink Transmitters or Receivers should be powered with the local power supply to maintain PS redundancy in the Enova DGX 32 enclosure

CONTROL PORTS AND INDICATORS

AxLink Port (1) 4-position 3.5mm Screw Terminal, provides data and power to external AxLink control devices

AxLink Indicator (1) AxLink LED (green) indicates the state of the AxLink portOne 5-position 3.5mm Screw Terminal

INTEGRATED CONTROLLER

LAN/Ethernet Port

•(1) RJ-45 Connector, NetLinx On Board Master is an NX Class Controller •TCP/IP Uplink Port (LAN 10/100/1000) •Supports up to 64-Port Unmanaged 10/100 Ethernet Switch (Cascaded architecture actual throughput dependent on loading. Worst case per port throughput 10 Mbps, best case 100 Mbps when used with 32 DXLink Transmitters and 32 DXLink Receivers) •Static IP or DHCP/DNS, SSL, Auto-negotiating, Half/Full duplex, Auto MDI/MDI-X Cross-Over TCP/IP, UDP/IP, CIP, SMTP, SNMP, Built-in Web server Includes support for DXLink Devices

Processor 1600 MIPS Program Port (USB) USB Mini-AB (used for NetLinx Studio control) ID Pushbutton Black ID pushbutton for setting IP mode and reverting to default configuration and firmware Configuration Dip Switch 2-position

USB (HID) KEYBOARD & MOUSE

USB (HID) Keyboard & Mouse Use the Enova DGX Digital Media Switcher in conjunction with DXLink Transmitters and Receivers (twisted pair and/or fiber), connect a DXLink Transmitter to a PC and a DXLink Receiver to a keyboard and mouse, the system then emulates commands from the receiver back to the PC. The Solecis SDX-510M functions as a DXLink Transmitter in this scenario. For a list of HID devices which have been tested and found to be working well with the latest firmware please view the document: DXLink HID Keyboard and Mouse Supported Devices

MEMORY

SDRAM 512 MB

NVRAM 1 MB

Flash 8 GB

ENCLOSURE CONTROL

Control Port (Serial) (1) DB-9 Connector, Bidirectional RS-232, Baud Rates of 9600 (default), 19200, 38400, 57600

Control Port (USB) (1) USB Mini-B

About AMX by HARMAN Founded in 1982 and acquired by HARMAN in 2014, AMX® is dedicated to providing AV solutions for an IT World. AMX solves the complexity of managing technology with reliable, consistent and scalable systems comprising control, video switching and distribution, digital signage and technology management. AMX systems are deployed worldwide in conference rooms, classrooms, network operation/command centers, homes, hotels, entertainment venues and broadcast facilities, among others. AMX is part of the HARMAN Professional Group, the only total audio, video, lighting, and control vendor in the professional AV market. HARMAN designs, manufactures and markets premier audio, video, infotainment and integrated control solutions for the automotive, consumer and professional markets. Revised 4.2.2015. ©2015 Harman. All rights reserved. Specifications subject to change.

www.amx.com | +1.469.624.7400 |800.222.0193

© 2015 AMX. All rights reserved.

Enova® DGX 1600 Enclosure

DGX1600-ENC (FG1061-16)

Overview The new Enova DGX 1600 Enclosure (DGX1600-ENC) is a Digital Media Switcher that is ready to support 4K and Ultra High Definition (UHD) content. This robust solution includes a NetLinx® NX Integrated Controller, redundant power supplies and can be populated with Enova DGX video input and output boards in addition to optional audio-switching boards. There are four connections per video board, and each enclosure holds four video input boards and four video output boards for a maximum matrix of 16x16.

The Enova DGX 1600 adds several new capabilities such as automatic setup of DXLink endpoints, single IP addressing for multiple endpoints, and a new web interface to greatly simplify installation and configuration. The new advanced Audio Switching Boards add audio breakaway capabilities and parametric EQ on each DGX output.

The Enova DGX 1600 is far beyond a modular media switcher with built-in controller – it functions as the centerpiece of a complete integrated solution that manages and distributes analog and digital audio and video including HDMI/HDCP, control and Ethernet. Easily integrate HDCP into system designs and enjoy hassle-free plug-and-play operation. No tools, no delays and no key constraints – it just works with AMX's exclusive InstaGate Pro® Technology. Built for today's and tomorrow's needs, a comprehensive set of Enova DGX boards can be used in conjunction with DXLink and DGX Transmitters and Receivers to provide an end-to-end distribution system over twisted pair cable or fiber. An integrated NetLinx NX Controller and embedded Ethernet switch enables management of the entire solution including source equipment and display devices located throughout the environment – all from a single point of control.

In addition to eliminating HDCP delays, InstaGate Pro allows traditionally key limited sources to be switched freely to all connected HDCP compliant displays – eliminating HDCP key limitations that plague large applications. Built-in SmartScale® Technology on every output provides video that is perfectly scaled for each connected display, eliminating the integration challenges that can occur when sources and displays have different supported resolutions – making it easy to specify, easy to install and easy to use. With the powerful combination of analog-to-digital signal conversion, video scaling and high speed digital switching the system delivers perfect video every time – regardless of signal type.

As part of a complete distribution system, easily send analog or digital audio and video including HDMI with HDCP signals, plus control, 10 Km over single mode fiber or 300 meters over multimode fiber; send all this plus power up to 100 meters over standard twisted pair cable, to and from the Enova DGX using the DXLink Twisted Pair and Fiber Transmitters/Receivers.

Common Applications Enova DGX is ideal for dramatically simplifying AV control and distribution in large spaces such as lecture halls, auditoriums, hotel ballrooms, casinos, museums and stadiums/arenas.

The Enova DGX is ideally suited for multi-room or configurable room applications, where multiple collaboration spaces share a single DGX for control.

Enova DGX fiber capabilities enable transport of audio, video and control up to 10 Km making it a perfect solution for tall buildings with multiple floors, large campuses with multiple buildings or large facilities such as a factory.

Enova DGX fiber solutions provide secure distribution of content for applications which data security is critical such as government, banking/finance or network operation centers.

Features HDMI/HDCP Switching – End-to-end distribution of HDMI/HDCP without interruption or key constraints using InstaGate Pro® Technology 4K and Ultra High Definition (UHD) Content Ready – Designed to support future resolutions for years to come HDCP Compliance Over Fiber – Compatible DXLink Fiber boards transmit uncompressed video, including HDCP protected content, up to 10 Km at 10 Gbps (single mode fiber options transmit 10 Km, multimode 300 m) Fiber Your Way – DXLink Fiber boards are available in single mode or multimode; simplex or duplex AV and Control over Twisted Pair, Fiber or Both – Send audio, video, bi-directional control and Ethernet over twisted pair or fiber cable, or integrate both into the same system Embedded NetLinx NX Integrated Control Processor – Allows any connected device to be managed, monitored or controlled Integrated Ethernet Switch – Pass Ethernet through the attached DXLink Twisted Pair or Fiber Transmitters and Receivers Analog to Digital Video Conversion with Scaled Outputs – Converts any source signal to digital and uses SmartScale Technology to automatically output video that is perfectly scaled for each connected display Onboard Web Configuration for all Aspects of the DGX System – Greatly simplifies the setup and configuration of Enova DGX systems including DXLink endpoints drastically reducing installation time Automatic Setup of DXLink Endpoints – Simplified installation by auto-discovering DXLink devices when they are connected to an Enova DGX Single IP Address Required for Multiple Endpoints – Reduces the need for IT administrators to provision numerous IP addresses across the system for transmitters and receivers Unrivaled Network Security: Dual NIC – The LAN port is used to connect the master to an external network, and the ICSLAN ports connect to AMX or third-party AV equipment isolated from the primary network, providing rock-solid security Independent Routing of Audio and Video Using Audio Switching Boards – Provides increased flexibility to combine and separate audio from video in a variety of applications AxLink Port – Makes it easier to connect AxLink devices like keypads directly to the Enova DGX InstaGate Pro Technology – Easily integrate HDCP into system designs and enjoy hassle-free matrix switching to all compliant displays. No tools, no delays, and no key constraints – it just works

SmartScale Technology – Automatically responds to the display's declared EDID information and scales the video to the best resolution and video parameters for that display without manual setup; this prevents inferior video quality when sources are forced to lower resolutions to support the least capable display in the system DXLink Twisted Pair Input and Output Boards – HDCP Compliant boards send audio, video, control, Ethernet and power over one standard twisted pair cable up to 200 m – 100 m to the matrix switcher and 100 m after the matrix switcher, see the Cabling for Success with DXLink white paper for more details Easily Convert Analog to Digital Signals – Use the Enova DGX Digital Media Switcher in conjunction with DXLink Multi-Format Transmitters (Twisted Pair or Fiber), and easily integrate legacy analog sources and automatically convert their signals to digital Hot Swappable Video Input / Output Boards – Easily add or replace I/O boards at any time after deployment

- the system automatically recognizes the new configuration and activates the boards 3D Support – Pass through latest video formats including 3D and Deep Color Surround Sound Support – Pass through high definition surround sound including Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, and 2-channel through 8-channel L-PCM High Speed Digital Switching – 12.8 Gbps ensures perfect pixel for pixel reproduction of video Fully Redundant Power Supplies With Independent Power Paths – Ensures maximum reliability for applications that require 24/7 uptime

Specifications

GENERAL

Supported Signal Styles/ Compatible Input and Output Boards

•DGX-I-HDMI, Enova DGX HDMI Input Board (FG1058- 540) •DGX-O-HDMI, Enova DGX HDMI Output Board

(FG1058-550)

•DGX-I-DVI, Enova DGX DVI Input Board (FG1058-600) •DGX-O-DVI, Enova DGX DVI Output Board (FG1058- 610) •DGX-I-DXL, Enova DGX DXLink Twisted Pair Input Board (FG1058-570) •DGX-O-DXL, Enova DGX DXLink Twisted Pair Output Board (FG1058-580) •DGX-I-DXF-MMD, Enova DGX DXLink Multimode Fiber Input Board, Duplex (FG1058-622) •DGX-O-DXF-MMD, Enova DGX DXLink Multimode Fiber Output Board, Duplex (FG1058-632) •DGX-I-DXF-MMS, Enova DGX DXLink Multimode Fiber Input Board, Simplex (FG1058-623) •DGX-O-DXF-MMS, Enova DGX DXLink Multimode Fiber Output Board, Simplex (FG1058-633) •DGX-I-DXF-SMD, Enova DGX DXLink Single Mode Fiber Input Board, Duplex (FG1058-620) •DGX-O-DXF-SMD, Enova DGX DXLink Single Mode Fiber Output Board, Duplex (FG1058-630) •DGX-I-DXF-SMS, Enova DGX DXLink Single Mode Fiber Input Board, Simplex (FG1058-621) •DGX-O-DXF-SMS, Enova DGX DXLink Single Mode Fiber Output Board, Simplex (FG1058-631) •DGX-AIE, Enova DGX Audio Insert / Extract Board for Enova DGX 8/16/32/64 (FG1058-705) •DGX800/1600-ASB, Enova DGX Audio Switching Board for Enova DGX 800/1600 (FG1061-716)

•PRODUCT PREVIEW, NOT RELEASED: DGX-I-HDMI-4K,

Enova DGX 4K HDMI Input Board (FG1061-540)

•PRODUCT PREVIEW, NOT RELEASED: DGX-I-DXL-4K,

Enova DGX 4K DXLink Twisted Pair Input Board

(FG1058-570)

•PRODUCT PREVIEW, NOT RELEASED: DGX-O-DXL-4K

Enova DGX 4K DXLink Twisted Pair Output Board

(FG1061-580)

Note: Use fiber duplex models for bidirectional control over fiber. Simplex models do not support control transport over fiber; although when used as part of a complete Enova DGX solution, control can be provided if a supplemental independent network connection is used. See the "Instruction Manual – Enova DGX 100 Series Digital Media Switchers" for details.

Dimensions (HWD) •Without Extractors, With Mounting Ears: 6 13/16" x 19" x 15" (17.4 cm x 48.3 cm x 38 cm) •With Extractors and Mounting Ears: 6 13/16" x 19" x 16" (17.4 cm x 48.3 cm x 40.6 cm)

Rack Units 4 Weight •Approximately 55 lbs (24.95 kg) per loaded enclosure

•Shipping Weight: Approximately 65 lbs (29.5 kg) per loaded enclosure

Regulatory Compliance FCC CFR Title 47 Part 15 Subpart B Class A CE EN 55022 Class A

CE EN 55024

CE EN 60950-1

IEC 60950-1

CSA 60950-1

ICES-003 Class A

UL 60950-1

RoHS

WEEE

MTBF 168,000 hours Recommended Accessories •EXB-IRS4 ICSLan IR/S Interface, 4 IR/S and 4 Inputs

(FG2100-23)

•EXB-COM2 ICSLan Serial Interface, 2 Ports (FG2100- 22) •EXB-REL8 ICSLan Relay Interface, 8 Channels

(FG2100-20)

•EXB-I/O8 ICSLan Input/Output Interface, 8 Channels

(FG2100-21)

•EXB-MP1 ICSLan Multi-Port, 1 COM, 1 IR/S, 2 I/O, 1 IR

RX (FG2100-26)

•CBL-HDMI-FL HDMI High Speed Flat Cable with RedMere Technology (FG10-2180-16) •CBL-RGB+A-FL RGB with Audio Flat Cable (FG10- 2183-16) •DGX8/16/3200-CPU, Enova DGX CPU Replacement Kit For Enova DGX 800/1600/3200 (FG1061-132K) •ENOVADGX-P1-PS, 850 W Power Supply Replacement

(FG1058-130K)

•FAN REPLACEMENT KIT (FG1060-110K)

•BATTERY REPLACEMENT KIT (FG1060-120K)

Note: Compatible boards are listed above under "supported signal styles/compatible input and output boards". Transmitter, Receiver and Digital Switcher compatibility is dependent on board selection, please see the data sheet for the selected board for compatible Transmitters, Receivers and Digital Switchers.

Per Channel Aggregate Data Rate (Max) 12.8 Gbps

Noise Level < 52.5 dBA @ 1m (Typical @ 25°C) Airflow Forced Air (inlet on sides, exhaust on back & top)

AC POWER REQUIREMENTS

AC Power 100-240 VAC single phase, 50-60 Hz Power Capacity (Max) 977 Watts, with redundancy Power Consumption (Max) 835 Watts, fully loaded DXLink Power enclosure with redundancy Power Consumption (Typ) 362 Watts, fully loaded HDMI enclosure with redundancy Power Factor Correction Supported, Complies with EN60555-2 and EN61000-3-

2TBA

ENVIRONMENTAL

Temperature (Operating) 32° to 104° F (0° to 40° C) Temperature (Storage) -22° to +158° F (-30° to +70° C) Humidity…