36C25623Q1155 OsmoPro Max.pdf

A.1 COMBINE SYNOPSIS/SOLICTATION

1.This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, in conjunction with FAR Part 13

Simplified Acquisition Procedures for Certain Commercial Items as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This requirement will be evaluated using the comparative evaluation process outlined in FAR 13.106-

2 (b) (3), where quotations will be compared to one another to determine which provides the best benefit to the Government.

2. The combined synopsis/solicitation number is 36C25623Q1155.

3. Solicitation document and incorporated provisions and clauses are those in effect through

Federal Acquisition Circular FAC 2023-03 (eff. 05/26/2023)

4. This requirement is Total Small Business Set-Aside. The North American Industry

Classification System number is 334516 with a size standard of 1000 Employees

5. Place of Performance: Gulf Coast Veterans Health Care System, 400 Veterans Ave, Biloxi MS

39531

6. Period of Performance: The period of performance shall be 90 Days After Receipt of Order

(ARO)

7. All questions regarding this solicitation shall be submitted via email to Contracting Officer, Anthony Marion at anthony.marion2@va.gov no later than 10:00A.M. Central Time on June 5, 2023.

8. Quotes are due no later than June 9, 2022 at 10:00A.M. Central Time and shall be submitted electronically via e-mail to the Contracting Officer, Anthony Marion at anthony.marion2@va.gov

COMBINE SYNOPSIS/SOLICTATION APPLICABLE Provisions and Clauses

The provision at 52.212-1 Introduction to Offerors – Commercial, applies to this acquisition.

The provision at 52.212-2 EVALUATION – COMMERCIAL ITEMS (JAN 1999) applies to this acquisition.

All offers shall include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications –Commercial Items.

The clause at 52.212-4, Contract Terms and Conditions – Commercial Items, applies to this acquisition and a statement. The addendum to FAR 52.212-4 also applies to this acquisition.

The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or

Executive Orders – Commercial Items, applies to this acquisition and all additional FAR clauses cited in the clause are applicable to the acquisition.

Addendum to FAR 52.212-4 Show FAR clauses followed by VAAR clauses in numeric order.

Solicitation contains a list of all clauses incorporated by reference in numeric order under

52.252-2 (see below), starting first with FAR and followed by VAAR.

36C25623Q1155

Table of Contents

A.1 COMBINE SYNOPSIS/SOLICTATION

SECTION B - CONTINUATION OF COMBINE SYNOPSIS/SOLICTATION

B.1 CONTRACT ADMINISTRATION DATA

B.2 PRICE/COST SCHEDULE

ITEM INFORMATION

B.3 DELIVERY SCHEDULE

B.4 STATEMENT OF WORK (SOW)

SECTION C - CONTRACT CLAUSES

C.1 52.225-1 BUY AMERICAN—SUPPLIES (OCT 2022)

C.2 VAAR 852.203-70 COMMERCIAL ADVERTISING (MAY 2018)

C.3 VAAR 852.211-70 EQUIPMENT OPERATION AND MAINTENANCE MANUALS

(NOV 2018)

C.4 VAAR 852.211-72 TECHNICAL INDUSTRY STANDARDS (NOV 2018)

C.5 VAAR 852.232-72 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS (NOV

2018)

C.6 VAAR 852.242-71 ADMINISTRATIVE CONTRACTING OFFICER (OCT 2020) ... 14

C.7 VAAR 852.246-71 REJECTED GOODS (OCT 2018)

C.8 VAAR 852.247-71 DELIVERY LOCATION (OCT 2018)

C.9 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

SECTION D - CONTRACT DOCUMENTS, EXHIBITS, OR ATTACHMENTS

SECTION E - SOLICITATION PROVISIONS

E.1 52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS

AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

E.2 52.225-2 BUY AMERICAN CERTIFICATE (OCT 2022)

E.3 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB

1998)

E.4 52.212-2 EVALUATION—COMMERCIAL PRODUCTS AND COMMERCIAL

SERVICES (NOV 2021)

E.5 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS—

COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEC 2022)

SECTION B - CONTINUATION OF COMBINE SYNOPSIS/SOLICTATION

B.1 CONTRACT ADMINISTRATION DATA

1. Contract Administration: All contract administration matters will be handled by the following individuals:

a. CONTRACTOR:

b. GOVERNMENT: Contracting Officer 36C256 Anthony Marion

Department of Veterans Affairs

Network Contracting Office 16

5075 Westheimer Road, Suite 750

Houston TX 77056-5643

2. CONTRACTOR REMITTANCE ADDRESS: All payments by the Government to the contractor will be made in accordance with:

[X] 52.232-33, Payment by Electronic Funds Transfer—System For Award Management, or

[X] 52.232-36, Payment by Third Party

3. INVOICES: Invoices shall be submitted in arrears:

a. Quarterly []

b. Semi-Annually []

c. Other [X] After Delivery and Acceptance

4. GOVERNMENT INVOICE ADDRESS: All Invoices from the contractor shall be submitted electronically in accordance with VAAR Clause 852.232-72 Electronic Submission of Payment

Requests.

FSC e-Invoice Payment http://www.fsc.va.gov/fsc/einvoice.asp

ACKNOWLEDGMENT OF AMENDMENTS: The offeror acknowledges receipt of amendments to the Solicitation numbered and dated as follows:

AMENDMENT NO DATE

B.2 PRICE/COST SCHEDULE

ITEM INFORMATION

ITEM

NUMBE

R

DESCRIPTION OF

SUPPLIES/SERVI

CES

QUANTI

TY

UNI

T UNIT PRICE AMOUNT

1.00 EA _______________

OsmoPROMAX Automated Osmometer name brand or equal PRINCIPAL NAICS CODE: 334516 - Analytical Laboratory Instrument Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment and Supplies

MANUFACTURER PART NUMBER (MPN): OSMOPRO

MAX

Instrument Installation PRINCIPAL NAICS CODE: 334516 - Analytical Laboratory Instrument Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment and Supplies

MANUFACTURER PART NUMBER (MPN): ITV-SKC-PRO

Validation:

validation up to 6 hours and required consumables.

Validation includes: • Method Comparison: 20 patient serum/plasma & urine samples (10 serum + 10 urine) • Precision/Accuracy: Clinitrol 290 - 5 replicates, Protinol Protein-Based Control (3 levels) & Renol Urine Control (3 levels) – 5 replicates each/per level • Linearity:

Osmolality Linearity Set (5 levels) – 5 replicates per level.

Summary page & comprehensive report • Certification of validation • Meets CAP and CLIA requirements PRINCIPAL NAICS CODE: 334516 - Analytical Laboratory Instrument Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment and Supplies

2.00 HR _______________

On-site training PRINCIPAL NAICS CODE: 334516 - Analytical Laboratory Instrument Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment and Supplies

17.00 KT _______________

Control,Protinol -3-Levels -3mL Vial -

PRINCIPAL NAICS CODE: 334516 - Analytical Laboratory Instrument Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment and Supplies

MANUFACTURER PART NUMBER (MPN): 3MA028

9.00 KT _______________

Control, Renol 2 Level Urine Osmolality - 3mL Vial

PRINCIPAL NAICS CODE: 334516 - Analytical Laboratory Instrument Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): 3LA085

Shipping

PRINCIPAL NAICS CODE: 334516 - Analytical Laboratory Instrument Manufacturing PRODUCT/SERVICE CODE: 6640 - Laboratory Equipment

MANUFACTURER PART NUMBER (MPN): SHP

GRAND TOTAL _______________

B.3 DELIVERY SCHEDULE

ITEM NUMBER QUANTITY

DELIVERY

DATE

0001 SHIP TO: Gulf Coast Veterans Health Care System 400 Veterans Ave Biloxi, MS 39531

USA

1.00 90 Days (ARO)

MARK

FOR:

Tara Thomas

(228) 523-5545 tara.thomas3@va.gov

0002 SHIP TO: Gulf Coast Veterans Health Care System 400 Veterans Ave

MARK

FOR:

Tara Thomas

0003 SHIP TO: Gulf Coast Veterans Health Care

400 Veterans Ave

FOR:

Tara Thomas

0004 SHIP TO: Gulf Coast Veterans Health Care

400 Veterans Ave

2.00 90 Days (ARO)

FOR:

Tara Thomas

0005 SHIP TO: Gulf Coast Veterans Health Care

400 Veterans Ave

17.00 90 Days (ARO)

FOR:

Tara Thomas

0006 SHIP TO: Gulf Coast Veterans Health Care

400 Veterans Ave

9.00 90 Days (ARO)

FOR:

Tara Thomas

0007 SHIP TO: Gulf Coast Veterans Health Care System 400 Veterans Ave

FOR:

Tara Thomas

B.4 STATEMENT OF WORK (SOW)

1. Contract Title: Osmometer Equipment Replacement (OsmoPro Max)

2. Background: Gulf Coast Veterans Health Care System (GCVHCS) has 2 platforms to measure

Osmolality. The reason for this request is to replace aging equipment that is no longer supported by the manufacture. Currently there are two platforms on hand; one platform is not in use because it is not functioning. The biomedical department is unable to repair due to replacement parts are not available from the manufacture. The other is currently in use. Both equipment has been declared BER by the biomedical department . The manufacture does not support these instruments and parts are not available for repair. By purchasing updated equipment, it will help optimize patient care with speed, accuracy and more capacity. The purchase of an analyzer will help with test processing in the laboratory with quick turnaround time and save labor time.

3. Scope: Contractor shall provide all shipping , delivery , training, personnel, transportation, and supervision to provide one (1) OsmoPro Max (name brand or equal).

The OsmoPro Max analyzer streamlines laboratory workflow and maximizes productivity in an easy, fast, and comprehensive way. It will provide answers for providers faster and allows for more sensitive detection to help improve patient management. The OsmoPro Max is a fully, multi-sample osmometer that measure osmolality by the freezing point methodology. It barcode reads specimen identification, automatically aspirate sample volume for testing, dispense sample and test to produce results within 3 minutes. The new analyzer system that we are seeking will perform testing on multiple samples and will accommodate different sample tube sizes between 11mm and 17mm width and 75mm and 115 mm height. The analyzer features both liquid-level sensing and crash detection pipetting capabilities and transfers 150 µL sample for processing. Contractor shall provide onsite training, installation and validation.

Instrument validation will include:

- Method comparison studies for both serum & urine samples.

- Precision and accuracy studies.

- Preforming control studies for establishing ranges.

- Linearity studies

- 5Comperhensive validation summary report that meets CAP and CLIA requirements.

4. Specifications/Characteristics include but not limited to:

- Shall determine osmolality by using freezing point depression method.

- Have automated pipetting and sample liquid level detection. Shall have automated pipette cleaning between each sample to prevent carryover and cross-contamination.

- Be able to sample from a specimen with a minimum volume of 150 µL. Must be able to accommodate tube sizes between 11mm and 17 mm in width and 75mm and 115 mm in height.

- Instrument Shall be able to scan label sample ID barcodes to identify samples and be able to manually enter sample IDs; integrated bar code scanner.

- Have a minimal sample capacity of continuous loading and unloading up to 20-samples at a time.

- Have test time of less than or equal to 3 minutes for each sample test.

- Reports in mOsm/kg H2O units.

- Has capability of onboard quality control including capable onboard Levey-Jennings control charts for statistical monitoring of daily QC.

- Have 10/100Mbps Ethernet,RJ45 connector port.

- Have USB 2.0 Type A ports and USB 2.0 Type B ports have prephreial printer connection option.

- Shall be accurate from 0 to 400 mOsm: mean value ≤ 2 mOsm/kg H2O. And from a nominal value

400 to 4000 mOsm: mean value ≤0.5% mOsm/kg H2O from nominal value.

- Shall be precise (within run) of a standard deviation ≤ 2 mOsm/kg H2O between 0 and 400 and a coefficient of variation ≤ 0.5% mOsm/kg H2O greater than 400 and 4000.

- Have a drift of less than 1 mOsm/kg H2O per 5°C (9°F) ambient temperature change.

- Recalibration of instrument whenever the ambient temperature changes of 5°C or greater.

- Able to operate between 18°C to 35°C and operate in 5% to 80% relative humidity.

- Electrical Voltage requirements 100 240 V AC (50-60 Hz) and power consumption of 60 W or less.

- Need to have the following dimensions (D x W x H) 16.5” x 14” x 18” (36cm x 42cm x 46cm); net weight 40lb or less.

- Has Stat testing capability.

- Can program replicate testing.

- Has automatic sample identification.

- Has a real-time QC status indicator and capable of primary vial control testing.

5. Brand Name or Equal – OsmoPro Max Osmometer

6. Delivery.

Gulf Coast Veterans Health Care System, Labortory

Warehouse Bldg 26

400 Veterans Ave

Biloxi MS 39531

Mon-Fri 7:00am- 3:30pm

SECTION C - CONTRACT CLAUSES

ADDENDUM to FAR 52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL

PRODUCTS AND COMMERCIAL SERVICES

Clauses that are incorporated by reference (by Citation Number, Title, and Date), have the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available.

The following clauses are incorporated into 52.212-4 as an addendum to this contract:

C.1 52.225-1 BUY AMERICAN—SUPPLIES (OCT 2022)

(a) Definitions. As used in this clause—

Commercially available off-the-shelf (COTS) item—(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of ‘‘commercial product’’ at Federal Acquisition Regulation (FAR) 2.101;

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Cost of components means—

(1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the end product.

Critical component means a component that is mined, produced, or manufactured in the

United States and deemed critical to the U.S. supply chain. The list of critical components is at

FAR 25.105.

Domestic end product means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States;

(ii) An end product manufactured in the United States, if—

(A) The cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029. Components of foreign origin of the same class or kind as those that the agency determines are not mined, produced, or manufactured in sufficient and reasonably available commercial quantities of a satisfactory quality are treated as domestic.

Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of foreign iron and steel constitutes less than 5 percent of the cost of all the components used in the end product. The cost of foreign iron and steel includes but is not limited to the cost of foreign iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the end product and a good faith estimate of the cost of all foreign iron or steel components excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the definition of ‘‘cost of components’’.

End product means those articles, materials, and supplies to be acquired under the contract for public use.

Fastener means a hardware device that mechanically joins or affixes two or more objects together. Examples of fasteners are nuts, bolts, pins, rivets, nails, clips, and screws.

Foreign end product means an end product other than a domestic end product.

Foreign iron and steel means iron or steel products not produced in the United States.

Produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, from the initial melting stage through the application of coatings, except metallurgical processes involving refinement of steel additives. The origin of the elements of the iron or steel is not relevant to the determination of whether it is domestic or foreign.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) 41 U.S.C. chapter 83, Buy American, provides a preference for domestic end products for supplies acquired for use in the United States. In accordance with 41 U.S.C. 1907, the domestic content test of the Buy American statute is waived for an end product that is a COTS item (see

12.505(a)(1)), except that for an end product that consists wholly or predominantly of iron or steel or a combination of both, the domestic content test is applied only to the iron and steel content of the end product, excluding COTS fasteners.

(c) Offerors may obtain from the Contracting Officer a list of foreign articles that the

Contracting Officer will treat as domestic for this contract.

(d) The Contractor shall deliver only domestic end products except to the extent that it specified delivery of foreign end products in the provision of the solicitation entitled "Buy

American Certificate."

Alternate I (OCT 2022). As prescribed in 25.1101(a)(1)(ii) substitute the following sentence for the first sentence of paragraph (1)(ii)(A) of the definition of ‘‘domestic end product’’ in paragraph

(a): (A) The cost of its components mined, produced, or manufactured in the United States exceeds ___ percent of the cost of all its components. [Contracting officer to insert the percentage.]

(End of Clause)

C.2 VAAR 852.203-70 COMMERCIAL ADVERTISING (MAY 2018)

The Contractor shall not make reference in its commercial advertising to Department of

Veterans Affairs contracts in a manner that states or implies the Department of Veterans Affairs approves or endorses the Contractor’s products or services or considers the Contractor’s products or services superior to other products or services.

(End of Clause)

C.3 VAAR 852.211-70 EQUIPMENT OPERATION AND MAINTENANCE

MANUALS (NOV 2018)

The Contractor shall follow standard commercial practices to furnish manual(s), handbook(s) or brochure(s) containing operation, installation, and maintenance instructions, including pictures or illustrations, schematics, and complete repair/test guides, as necessary, for technical medical equipment and devices, and/or other technical and mechanical equipment provided per CLIN(s)

. The manuals, handbooks or brochures shall be provided in hard copy, soft copy or with electronic access instructions, consistent with standard industry practices for the equipment or device. Where applicable, the manuals, handbooks or brochures will include electrical data and connection diagrams for all utilities. The documentation shall also contain a complete list of all replaceable parts showing part number, name, and quantity required.

(End of Clause)

C.4 VAAR 852.211-72 TECHNICAL INDUSTRY STANDARDS (NOV 2018)

(a) The Contractor shall conform to the standards established by: Food and Drug

Administration (FDA).

(b) The Contractor shall submit proof of conformance to the standard. This proof may be a label or seal affixed to the equipment or supplies, warranting that the item(s) have been tested in accordance with the standards and meet the contract requirement. Proof may also be furnished by the organization listed above certifying that the item(s) furnished have been tested in accordance with and conform to the specified standards.

(c) Offerors may obtain the standards cited in this provision by submitting a request, including the solicitation number, title and number of the publication to: Food and Drug Administration

(FDA).

(d) The offeror shall contact the Contracting Officer if response is not received within two weeks of the request.

(End of Clause)

C.5 VAAR 852.232-72 ELECTRONIC SUBMISSION OF PAYMENT

REQUESTS (NOV 2018)

(a) Definitions. As used in this clause—

(1) Contract financing payment has the meaning given in FAR 32.001;

(2) Designated agency office means the office designated by the purchase order, agreement, or contract to first receive and review invoices. This office can be contractually designated as the receiving entity. This office may be different from the office issuing the payment;

(3) Electronic form means an automated system transmitting information electronically according to the accepted electronic data transmission methods and formats identified in paragraph (c) of this clause. Facsimile, email, and scanned documents are not acceptable electronic forms for submission of payment requests;

(4) Invoice payment has the meaning given in FAR 32.001; and

(5) Payment request means any request for contract financing payment or invoice payment submitted by the contractor under this contract.

(b) Electronic payment requests. Except as provided in paragraph (e) of this clause, the contractor shall submit payment requests in electronic form. Purchases paid with a

Government-wide commercial purchase card are considered to be an electronic transaction for purposes of this rule, and therefore no additional electronic invoice submission is required.

(c) Data transmission. A contractor must ensure that the data transmission method and format are through one of the following:

(1) VA’s Electronic Invoice Presentment and Payment System at the current website address provided in the contract.

(2) Any system that conforms to the X12 electronic data interchange (EDI) formats established by the Accredited Standards Center (ASC) and chartered by the American National

Standards Institute (ANSI).

(d) Invoice requirements. Invoices shall comply with FAR 32.905.

(e) Exceptions. If, based on one of the circumstances in this paragraph (e), the Contracting

Officer directs that payment requests be made by mail, the Contractor shall submit payment requests by mail through the United States Postal Service to the designated agency office.

Submission of payment requests by mail may be required for—

(1) Awards made to foreign vendors for work performed outside the United States;

(2) Classified contracts or purchases when electronic submission and processing of payment requests could compromise the safeguarding of classified or privacy information;

(3) Contracts awarded by contracting officers in the conduct of emergency operations, such as responses to national emergencies;

(4) Solicitations or contracts in which the designated agency office is a VA entity other than the VA Financial Services Center in Austin, Texas; or

(5) Solicitations or contracts in which the VA designated agency office does not have electronic invoicing capability as described above.

(End of Clause)

C.6 VAAR 852.242-71 ADMINISTRATIVE CONTRACTING OFFICER (OCT

2020)

The Contracting Officer reserves the right to designate an Administrative Contracting Officer

(ACO) for the purpose of performing certain tasks/duties in the administration of the contract.

Such designation will be in writing through an ACO Letter of Delegation and will identify the responsibilities and limitations of the ACO. A copy of the ACO Letter of Delegation will be furnished to the Contractor.

(End of Clause)

C.7 VAAR 852.246-71 REJECTED GOODS (OCT 2018)

(a) Supplies and equipment. Rejected goods will be held subject to Contractor’s order for not more than 15 days, after which the rejected merchandise will be returned to the Contractor’s address at the Contractor’s risk and expense. Expenses incident to the examination and testing of materials or supplies that have been rejected will be charged to the Contractor.

(b) Perishable supplies. The Contractor shall remove rejected perishable supplies within 48 hours after notice of rejection. Supplies determined to be unfit for human consumption will not be removed without permission of the local health authorities. Supplies not removed within the allowed time may be destroyed. The Department of Veterans Affairs will not be responsible for, nor pay for, products rejected. The Contractor will be liable for costs incident to examination of rejected products.

C.8 VAAR 852.247-71 DELIVERY LOCATION (OCT 2018)

Shipment of deliverable items, other than reports, shall be to:

See B.3 Delivery Schedule

(End of Clause)

C.9 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://www.acquisition.gov/far/index.html http://www.va.gov/oal/library/vaar/

FAR

Number

Title Date

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE OCT 2018

52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE

MAINTENANCE

AUG 2020

52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL

PRODUCTS AND COMMERCIAL SERVICES

DEC 2022

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO

IMPLEMENT STATUTES OR EXECUTIVE ORDERS—

COMMERCIAL PRODUCTS AND COMMERCIAL

SERVICES

MAR 2023

52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL

BUSINESS SUBCONTRACTORS

MAR 2023

(End of Addendum to 52.212-4)

SECTION D - CONTRACT DOCUMENTS, EXHIBITS, OR

ATTACHMENTS

SECTION E - SOLICITATION PROVISIONS

ADDENDUM to FAR 52.212-1 INSTRUCTIONS TO OFFERORS—COMMERCIAL PRODUCTS

AND COMMERCIAL SERVICES

This combined synopsis/solicitation is issued under Federal Acquisition Regulation 12 and 13

Simplified Procedures for Certain Commercial Items.

The QUOTE PREPARATION INSTRUCTIONS:

1. Quote Preparation

a. These instructions are designed to ensure the proper submission of information necessary to provide for comprehensive evaluation of quotes. Quoters shall carefully review this section prior to commencing preparation of quotes and take the necessary measures to ensure that the information submitted is factual, accurate, and complete.

2. Submission Instructions

a. One electronic copy (email) of all sections of the quote (Technical and Price) shall be submitted to the Contracting Officer via email to anthony.marion2@va.gov on or before the due date and time listed in this solicitation. The contractor's email shall include in the subject line

“RFQ 36C25623Q1155 - OsmoPro Max Osmometer

b. Faxed quotes are NOT permitted under any circumstances.

3. Quote Format

a. Electronic Copy: Provide one (1) electronic copy of the complete quote. Electronic copies must be in Microsoft Word or Adobe Acrobat format, and virus checked prior to submission.

b. The quoters shall be held responsible for the validity of all information supplied in their quote.

c. Please complete and submit, with Technical quote (volume 1)

3.1. Volume 1 contains one section, Technical.

A summary of the Technical Volume 1 requirement is listed below. The detailed requirement for the technical volume is listed in section 4.

a. Technical

i. Offeror's Qualifications

ii. Offeror's Product

iii. Buy American Certificate

iv. Offeror Representative and Certifications- Commercial Products and Commercial Services

3.1.1 Past Performance - The contractor does not need to turn in any information for past performance. CPARS will be reviewed.

3.2. Volume 2 contains one section, Pricing Information.

A summary of the Price Volume 2 requirement is listed below.

a. Completed B.1 Contract Administration.

b. Completed Section B.2 Price Schedule.

c. Signed /acknowledged copies of all solicitation amendments.

4. Quote Volume Requirements

a. Volume 1 - TECHNICAL

i. Offeror's Qualifications

Offeror shall demonstrate that it is original equipment manufacturer (OEM) or authorized distributor for the name brand product. Offerors shall submit a copy of OEM authorization with their quote.

ii. Offeror’s Product

1. Offers of "equal" products, including "equal" products of the brand name manufacturer, shall

Meet the salient physical, functional, or performance characteristic specified in this solicitation.

2. Offerors shall provide product literature stating the brand name or equal equipment meets the requirement and salient characteristics in the Statement of Work (SOW). Literature is not required if the contractor is providing brand name equipment as listed in the SOW.

3. Offerors shall provide the name, make or model number, and part numbers for all equipment.

4. Offerors shall provide descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contra

iii. Buy American Certificate

Offer shall complete 52.225-2 Buy American Certificate in section E.2 (b) in this solicitation.

iv. Offeror Representative and Certifications- Commercial Products and Commercial Services

Offer shall complete 52.212-3 in section E.5 in this solicitation.

Provisions that are incorporated by reference (by Citation Number, Title, and Date), have the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available.

The following provisions are incorporated into 52.212-1 as an addendum to this solicitation:

E.1 52.204-24 REPRESENTATION REGARDING CERTAIN

TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR

EQUIPMENT (NOV 2021)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the

Offeror has represented that it ‘‘does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument’’ in paragraph (c)(1) in the provision at

52.204–26, Covered Telecommunications Equipment or Services—Representation, or in paragraph (v)(2)(i) of the provision at 52.212–3, Offeror Representations and Certifications–

Commercial Products and Commercial Services. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it ‘‘does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services’’ in paragraph (c)(2) of the provision at 52.204–26, or in paragraph (v)(2)(ii) of the provision at 52.212–3.

(a) Definitions. As used in this provision—

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204–25, Prohibition on Contracting for

Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition. (1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization

Act for Fiscal Year 2019 (Pub. L. 115–232) prohibits the head of an executive agency on or after

August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal

Year 2019 (Pub. L. 115–232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract.

Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award

Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services.”

(d) Representations. The Offeror represents that—

(1) It [ ] will, [ ] will not provide covered telecommunications equipment or services to the

Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds “will’’ in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that—

It [ ] does, [ ] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services.

The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds “does’’ in paragraph (d)(2) of this section.

(e) Disclosures. (1) Disclosure for the representation in paragraph (d)(1) of this provision. If the

Offeror has responded “will’’ in the representation in paragraph (d)(1) of this provision, the

Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand;

model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services— https://www.sam.gov/

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded “does’’ in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand;

model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph

(b)(2) of this provision.

(End of Provision)

E.2 52.225-2 BUY AMERICAN CERTIFICATE (OCT 2022)

(a)(1) The Offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c) of this provision contains a critical component.

(2) The Offeror shall list as foreign end products those end products manufactured in the

United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select

‘‘no’’.

(3) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component (see FAR 25.105).

(4) The terms ‘‘commercially available off-the-shelf (COTS) item,’’ ‘‘critical component,’’

‘‘domestic end product,’’ ‘‘end product,’’ and ‘‘foreign end product’’ are defined in the clause of this solicitation entitled ‘‘Buy American—Supplies.”

(b) Foreign End Products:

Line item No. Country of origin Exceeds 55% domestic content (yes/no)

[List as necessary]

(c) Domestic end products containing a critical component:

Line item No.

(d) The Government will evaluate offers in accordance with the policies and procedures of part

25 of the Federal Acquisition Regulation.

(End of Provision)

E.3 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY

REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

http://www.acquisition.gov/far/index.html http://www.va.gov/oal/library/vaar/

(End of Provision)

FAR

Number

Title Date

52.204-7 SYSTEM FOR AWARD MANAGEMENT OCT 2018

52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE

REPORTING

AUG 2020

(End of Addendum to 52.212-1)

FAR

Number

Title Date

52.212-1 INSTRUCTIONS TO OFFERORS—COMMERCIAL

PRODUCTS AND COMMERCIAL SERVICES

MAR 2023

E.4 52.212-2 EVALUATION—COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (NOV 2021)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

(1) Technical

(2) Price

(3) Past Performance

(1) Evaluation Approach. The Government will evaluate quotations using the comparative evaluation process outlined in FAR 13.106-2 (b) (3), where quotations will be compared to one another to determine which provides the best benefit to the

Government. Contracting Officer (CO) will conduct an initial review for compliance with

Section 3, Quote Format and Section 4 Quote Volume Requirements in Section E, Addendum to 52.212-1 Instructions to Offerors and Offerors may be rejected for failure to comply.

(2) Under Factor 1 Technical, the quotation will be evaluated to the extent to which it can meet and/or exceed the Government’s requirements as outlined in the solicitation and based on the information requested in the instructions to quoters section of the solicitation.

(3) Under Factor 2 Price, the Government will evaluate the quoted price for reasonableness by adding the total of all line item prices. The government will also compare the proposed prices with the Independent Government Estimate and quotes posed by other offers.

(4) Past Performance: Past Performance history will be reviewed through the Contractor

Performance Assessment Reports System to assist in making the responsibility determination. Past Performance will be reviewed as part of the responsibility determination only.

(b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of Provision)

E.5 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS—

COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEC 2022)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management

(SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.

(a) Definitions. As used in this provision—

Covered telecommunications equipment or services has the meaning provided in the clause

52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance

Services or Equipment.

Economically disadvantaged women-owned small business (EDWOSB) concern means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR 127, and the concern is identified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

Forced or indentured child labor means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

Immediate owner means an entity, other than the offeror, that has direct control of the offeror.

Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

Inverted domestic corporation means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

Manufactured end product means any end product in product and service codes (PSCs) 1000-

9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor.

Reasonable inquiry has the meaning provided in the clause 52.204–25, Prohibition on

Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment

Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education;

or

(6) Have been voluntarily suspended.

Sensitive technology—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the

International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

Service-disabled veteran-owned small business concern—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

Small business concern—

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR

121.103.

Small disadvantaged business concern, consistent with 13 CFR 124.1002,…