36C24819Q1143-000.docx

36C24819Q1143

FedBizOpps Combined Synopsis/Solicitation Notice

CLASSIFICATION CODE

SUBJECT

CONTRACTING OFFICE'S

ZIP-CODE

SOLICITATION NUMBER

RESPONSE DATE

(MM-DD-YYYY)

ARCHIVE

DAYS AFTER THE RESPONSE DATE

RECOVERY ACT FUNDS

SET-ASIDE

NAICS CODE

CONTRACTING OFFICE

ADDRESS

POINT OF CONTACT

(POC Information Automatically Filled from User Profile Unless Entered)

DESCRIPTION

See Attachment

AGENCY'S URL

URL DESCRIPTION

AGENCY CONTACT'S EMAIL

ADDRESS

EMAIL DESCRIPTION

ADDRESS

POSTAL CODE

COUNTRY

ADDITIONAL INFORMATION

GENERAL INFORMATION

PLACE OF PERFORMANCE

* = Required Field FedBizOpps Combined Synopsis/Solicitation Notice Rev. March 2010 Supply: Complex Surgical Spine Instruments and Implants 32827 36C24819Q1143 09-10-2019 N 339112 Department of Veterans Affairs Orlando VA Medical Center 13800 Veterans Way Orlando FL 32827 Katy Werby 407-646-4011 katy.werby@va.gov Patricia Brown 407-646-4005 PatriciaE.Brown@va.gov Orlando VA Medical Center

SPS SVC

13800 Veterans Way Orlando, FL 32827

USA

www.va.gov Department of Veteran Affairs katy.werby@va.gov Katy Werby

RFQ #: 36C24819Q1143

ORLANDO VA HEALTHCARE SYSTEM

PROJECT TITLE: Spine Instruments and Implants

This is a combined synopsis/solicitation for commercial services/items prepared in accordance with the format in FAR Subpart 12.6 in conjunction with FAR Part 13, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. This combined synopsis/solicitation is issued as a Request for Quote (RFQ) 36C24819Q1143.

Network Contracting Office (NCO) 8 intends to award a fixed price contract for the Orlando VA Medical Center to purchase Spine instruments and implants.

RELEVANT INFORMATION

1. Quote shall be valid for 60 days from the close date of this RFQ.

2. Please see RFQ for detailed description of requirements.

3. Questions or comments must be provided to the Contract Specialist in writing via email no later than September 5, 2019 at 1:00 PM EST. Telephone and other means of oral communication is not permitted.

4. Quotes are due on September 10, 2019 at 1:00 PM EST. Quotes will only be accepted by email to: Contract Specialist Katy Werby at katy.werby@va.gov and Contracting Officer Patricia Brown at PatriciaE.Brown@va.gov.

Table of Contents

SECTION B - CONTINUATION OF SF 1449 BLOCKS

B.1 CONTRACT ADMINISTRATION DATA

1. Contract Administration: All contract administration matters will be handled by the following individuals:

b. GOVERNMENT: Contracting Officer 36C248 CO: P. Brown; CS: K. Werby Department of Veterans Affairs Orlando VA Healthcare System 13800 Veterans Way Orlando FL 32827

2. CONTRACTOR REMITTANCE ADDRESS: All payments by the Government to the contractor will be made in accordance with:

3. INVOICES: Invoices shall be submitted in arrears:

4. GOVERNMENT INVOICE ADDRESS: All Invoices from the contractor shall be submitted electronically in accordance with VAAR Clause 852.232-72 Electronic Submission of Payment Requests.

Department of Veterans Affairs Financial Services Center P.O. Box 149971 Austin TX 78714-9971

ACKNOWLEDGMENT OF AMENDMENTS: The offeror acknowledges receipt of amendments to the Solicitation numbered and dated as follows:

B.2 PRICE/COST SCHEDULE

ITEM INFORMATION

CASE,DOUBLE,GENERIC,OUTER CASE (1850077) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1850077

LID,GENERIC OUTER LID (1850079) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1850079

ATL SD SCREW CADDY LID,CASE 3123001 "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3123001

SCREW CADDY,SD,E23100 "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3123100

ATLANTIS SCREW,GAUGE 6199765 "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 6199765

LABEL 7200900 ATL VISION 2.0 OUTER CASE "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200900

TRAY 7200901 ATL VISION 2.0 IMPLANT "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200901

CADDY 7200902 ATL VIS 2.0 SHORT PLATE "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200902

LID 7200903 VIS 2.0 SHORT PLATE CADDY "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200903

CADDY 7200904 ATL VISION 2.0 LONG PLATE "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200904

LID 7200905 VISION 2.0 LONG PLATE CADDY "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200905

TRAY 7200906 ATL VISION 2.0 INSTRUMENT "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200906

SCREW 3120411 4.0 X 11 SELF DRILL FIX "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3120411

SCREW 3120412 4.0 X 12 SELF DRILL FIX "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3120412

SCREW 3120413 4.0 X 13 SELF DRILL FIX "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3120413

SCREW 3120414 4.0 X 14 SELF DRILL FIX "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3120414

SCREW 3120415 4.0 X 15 SELF DRILL FIX "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3120415

SCREW 3120416 4.0 X 16 SELF DRILL FIX "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3120416

SCREW 3120417 4.0 X 17 SELF DRILL FIX "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3120417

SCREW 3120511 4.0 X 11 SELF DRILL VAR "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3120511

SCREW 3120512 4.0 X 12 SELF DRILL VAR "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3120512

SCREW 3120513 4.0 X 13 SELF DRILL VAR "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3120513

SCREW 3120514 4.0 X 14 SELF DRILL VAR "OR EQUAL ITEM"

SCREW 3120515 4.0 X 15 SELF DRILL VAR "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3120515

SCREW 3120516 4.0 X 16 SELF DRILL VAR "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3120516

SCREW 3120517 4.0 X 17 SELF DRILL VAR "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3120517

SCREW 3125411 4.5 X 11 SELF DRILL FIX "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3125411

SCREW 3125413 4.5 X 13 SELF DRILL FIX "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3125413

SCREW 3125415 4.5 X 15 SELF DRILL FIX "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3125415

SCREW 3125417 4.5 X 17 SELF DRILL FIX "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3125417

SCREW 3125511 4.5 X 11 SELF DRILL VAR "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3125511

SCREW 3125513 4.5 X 13 SELF DRILL VAR "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3125513

SCREW 3125515 4.5 X 15 SELF DRILL VAR "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3125515

SCREW 3125517 4.5 X 17 SELF DRILL VAR "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 3125517

PLATE 7200019 ATL VISION ELITE 19MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200019

PLATE 7200021 ATL VISION ELITE 21MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200021

PLATE 7200023 ATL VISION ELITE 23MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200023

PLATE 7200027 ATL VISION ELITE 27.5MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200027

PLATE 7200030 ATL VISION ELITE 30MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200030

PLATE 7200032 ATL VISION ELITE 32.5MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200032

PLATE 7200035 ATL VISION ELITE 35MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200035

PLATE 7200037 ATL VISION ELITE 37.5MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200037

PLATE 7200040 ATL VISION ELITE 40MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200040

PLATE 7200042 ATL VISION ELITE 42.5MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200042

PLATE 7200045 ATL VISION ELITE 45MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200045

PLATE 7200047 ATL VISION ELITE 47.5MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200047

PLATE 7200050 ATL VISION ELITE 50MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200050

PLATE 7200052 ATL VISION ELITE 52.5MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200052

PLATE 7200055 ATL VISION ELITE 55MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200055

PLATE 7200057 ATL VISION ELITE 57.5MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200057

PLATE 7200060 ATL VISION ELITE 60MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200060

PLATE 7200062 ATL VISION ELITE 62.5MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200062

PLATE 7200065 ATL VISION ELITE 65MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200065

PLATE 7200067 ATL VISION ELITE 67.5MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200067

PLATE 7200070 ATL VISION ELITE 70MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200070

PLATE 7200072 ATL VISION ELITE 72.5MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200072

PLATE 7200075 ATL VISION ELITE 75MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200075

PLATE 7200077 ATL VISION ELITE 77.5MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200077

PLATE 7200080 ATL VISION ELITE 80MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200080

PLATE 7200082 ALT VISION ELITE 82.5MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200082

PLATE 7200085 ATL VISION ELITE 85MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200085

PLATE 7200087 ATL VISION ELITE 87.5MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200087

PLATE 7200090 ATL VISION ELITE 90MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200090

PLATE 7200095 ATL VISION ELITE 95MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200095

PLATE 7200100 ATL VISION ELITE 100MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200100

PLATE 7200105 ATL VISION ELITE 105MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200105

PLATE 7200110 ATL VISION ELITE 110MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200110

PLATE 7200127 ATL VISION ELITE 1LVL 27MM1 "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200127

PLATE 7200130 ATL VISION ELITE 30MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200130

PLATE 7200132 ATL VISION ELITE 32MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200132

PLATE 7200145 ATL VISION ELITE 45MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200145

PLATE 7200147 ATL VISION ELITE 47MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200147

PLATE 7200150 ATL VISION ELITE 50MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200150

PLATE 7200152 ATL VISION ELITE 52MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200152

PLATE 7200155 ATL VISION ELITE 55MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200155

PLATE 7200167 ATL VISION ELITE 67MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200167

PLATE 7200170 ATL VISION ELITE 70MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200170

PLATE 7200172 ATL VISION ELITE 72MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200172

PLATE 7200180 ATL VISION ELITE 80MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200180

PLATE 7200182 ATL VISION ELITE 82MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200182

PLATE 7200185 ATL VISION ELITE 85MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200185

INSTRUMENT 876-402 PLATE BENDER "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 876-402

INSTRUMENT,CRNS,LRDTC,10X14X11 (974-041) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 974-041

INSTRUMENT,CRNS,LRDTC,5X14X11 (974-541) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 974-541

INSTRUMENT,CRNS,LRDTC,6X14X11 (974-641) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 974-641

INSTRUMENT,CRNS,LRDTC,7X14X11 (974-741) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 974-741

INSTRUMENT,CRNS,LRDTC,8X14X11 (974-841) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 974-841

INSTRUMENT,CRNS,LRDTC,9X14X11 (974-941) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 974-941

CASES,CRNS,LRDTC,MISC,INS,INSERT (174-884) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 174-884

CASES,CRNS,LRDTC,OUTER BASE,(174-998) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 174-998

C-STONE PARALL TRIAL INST-UPP(1740882) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1740882

C-STONE PARALL OUTER LID (1740885) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1740885

10X14X11,CORNERSTONE SR TRAIL (8740041) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 8740041

5X14X11,CORNERSTONE SR TRIAL (8740541) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 8740541

6X14X11,CORNERSTONE SR TRIAL (8740641) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 8740641

7X14X11,CORNERSTONE SR TRAIL (8740741) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 8740741

8X14X11,CORNERSTONE SR TRAIL (8740841) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 8740841

9X14X11,CORNERSTONE SR TRAIL (8740941) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 8740941

INSTRUMENT,MALLET 8 INCH,875-716 "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 875-716

INSTRUMENT,CRNS TAMP,CRVD(875-725) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 875-725

CSTONE INSERTER II DUAL PIVOT (875-782) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 875-782

LID,GENERIC IMPLANT TRAY LID (1850099) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1850099

LABEL,X10 4.75 CROSSLINK (1850404) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1850404

TRAY,CROSSLINK 1,4.75 X 10 (1854213) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1854213

TRAY,CROSSLINK 2,4.75 X 10 (1854214) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1854214

TRAY,LIFT BASKET DOUBLE (7068395) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7068395

CROSSLINK,4.75 TI NS FIXED 16MM (5442016) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5442016

CROSSLINK,TI NS FIXED 19MM (5442019) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5442019

CROSSLINK,4.75 TI NS FIXED 22MM (5442022) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5442022

CROSSLINK,4.75 TI NS FIXED 25MM (5442025) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5442025

CROSSLINK,4.75 TI NS FIXED 28MM (5442028) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5442028

CROSSLINK,4.75 TI NS FIXED 31MM (5442031) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5442031

CROSSLINK,4.75 TI NS FIXED 34MM (5442034) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5442034

CROSSLINK,4.75 TI NS FIXED 37MM (5442037) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5442037

CROSSLINK,4.75 TI NS MLT 30-32MM (5442130) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5442130

CROSSLINK,4.75 TI NS MLT 32-37MM (5442132) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5442132

CROSSLINK,4.75 TI NS MLT 36-38MM (5442136) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5442136

CROSSLINK,4.75 X 10 MLT SPN 38-42MM (5442138) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5442138

CROSSLINK,4.75 X 10 MLTSPN 41-48MM (5442141) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5442141

CROSSLINK,4.75 X 10 MLTSPN 47-60MM (5442147) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5442147

CROSSLINK,4.75 X 10 MLTSPN 60-86MM (5442160) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5442160

SCREW,BREAKOFF SET 12 32 TI (8110855) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 8110855

CALIPER,X10 CALIPER (5484329) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5484329

CARD,X10,CROSSLINK,MEASURING CARD (5484330) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5484330

INSTRUMENT,TBOLT POSITIONER (808-545) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 808-545

INSTRUMENT,3.0MM HEX DRIVER (8110530) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 8110530

INSTRUMENT,7 32 DRVR 80LBIN LMT (8110535) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 8110535

INSTRUMENT,COUNTER TORQUE (8110540) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 8110540

CASE,TRIPLE GENERIC OUTER CASE (1850078) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1850078

LABEL,SOLERA,4.75 DEGEN IMPLANTS (1854100) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1854100

TRAY,DEGEN,MAS TRAY (1854101) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1854101

TRAY,DEGEN RODS TRAY (1854102) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1854102

LID,SET SCREW MODULE LID (1854221) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1854221

MODULE,SET SCREW MODULE (1854222) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1854222

TRAY,SOLERA,4.75 DEGEN ROD INSERT TRAY (7068568) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7068568

TEMPLATE,20 CM ROD (5484520) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5484520

TOOL,SCREW CONFIRMATION (5584007) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5584007

SET SCREW,4.75 TI NS BRK OFF "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5440030

SCREW,MAS 5.5 X 30 CC (54840005530) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 54840005530

SCREW,MAS 5.5 X 35 CC (54840005535) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 54840005535

SCREW,MAS 5.5 X 40 CC (54840005540) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 54840005540

SCREW,MAS 5.5 X 45 CC (54840005545) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 54840005545

SCREW,MAS 5.5 X 50 CC (54840005550) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 54840005550

SCREW,MAS 5.5 X 55 CC (54840005555) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 54840005555

SCREW,MAS 6.5 X 25 CC (54840006525) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 54840006525

SCREW,MAS 6.5 X 30 CC (54840006530) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 54840006530

SCREW,MAS 6.5 X 35 CC (54840006535) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 54840006535

SCREW,MAS 6.5 X 40 CC (54840006540) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 54840006540

SCREW,MAS 6.5 X 45 CC (54840006545) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 54840006545

SCREW,MAS 6.5 X 50 CC (54840006550) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 54840006550

SCREW,MAS 6.5 X 55 CC (54840006555) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 54840006555

SCREW,MAS 7.5 X 30 CC (54840007530) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 54840007530

SCREW,MAS 7.5 X 35 CC (54840007535) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 54840007535

SCREW,MAS 7.5 X 40 CC (54840007540) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 54840007540

SCREW,MAS 7.5 X 45 CC (54840007545) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 54840007545

SCREW,MAS 7.5 X 50 CC (54840007550) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 54840007550

SCREW,MAS 7.5 X 55 CC (54840007555) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 54840007555

SCREW,MAS 7.5 X 60 CC (54840007560) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 54840007560

ROD,4.75 CCM NS CURV 30MM (1475501030) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1475501030

ROD,4.75 CCM NS CURV 35MM (1475501035)

LOCAL STOCK NUMBER: 1475501035

ROD,4.75 CCM NS CURV 40MM (1475501040) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1475501040

ROD,4.75 CCM NS CURV 45MM (1475501045) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1475501045

ROD,4.75 CCM NS CURV 50MM (1475501050) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1475501050

ROD,4.75 CCM NS CURV 55MM (1475501055) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1475501055

ROD,4.75 CCM NS CURV 60MM (1475501060) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1475501060

ROD,4.75 CCM NS CURV 70MM (1475501070) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1475501070

ROD,4.75 CCM NS CURV 80MM (1475501080) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1475501080

ROD,4.75 CCM NS CURV 90MM (1475501090) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1475501090

ROD,4.75 CCM NS CURV 100MM (1475501100) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1475501100

ROD,4.75 CCM NS CURV 110MM (1475501110) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1475501110

ROD,4.75 CCM NS CURV 120MM (1475501120) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1475501120

LABEL,INSTRUMENT SET 2 (1850402) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1850402

LABEL,ISTRUMENT SET 1(1850403) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1850403

TRAY,INSTRUMENT TRAY 1 (7068520) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7068520

TRAY,INSTRUMENT TRAY 2 (7068521) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7068521

TRAY,INSTRUMENT TRAY 3 (7068522) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7068522

TRAY, INSTRUMENT TRAY 4 (7068523) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7068523

DRIVER,BALL ENDED REMOVAL T-25 (5480004V) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5480004V

SHAFT,PROVISIONAL DRVR 6.35 HEX (5480131V) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5480131V

HANDLE,ADJUSTABLE DRIVER (5480140V) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5480140V

SCREWDRIVER,TWISTED T25 G5 4.75 (5484113) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5484113

DRIVER,TRQUE INDICATING G5 4.75 (5484147) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5484147

DISTRACTOR,PLIERS 4.75 (5484171) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5484171

PUSHER,ROD 4.75 SHAFT (5484235) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5484235

SHAFT,HEAD POSITIONER 4.75 (5484301) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5484301

GRIPPER,ROD 4.75 (5484303) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5484303

REDUCER,BEALE ROD-SLOTS 4.75 (5484307) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5484307

INSTRUMENT,COUNTER-TORQUE 4.75 (5484308) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5484308

COMPRESSOR 4.75 (5484309) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5484309

BENDER,INSITU-LEFT 4.75(5484313) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5484313

BENDER,CORONAL-LEFT 4.75 (5484315) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5484315

HOLDER,ROD 4.75 (5484318) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5484318

TOOL,SCREW CONFIRMATION (5584007) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5584007

INSTRUMENT,DUAL ENDED FEELER (7480100) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7480100

INSTRUMENT,TAPERED HEX SCREWDRIVER (7480114) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7480114

INSTRUMENT,PROVISIONAL DRV SHORT (7480131) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7480131

INSTRUMENT,T27 WITH OBTURATOR (7480154) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7480154

INSTRUMENT,FRNCH BNDR SLCNE HDL (7480162) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7480162

QC RATCHETING,T-HANDLE (7579000) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7579000

INSTRUMENT,TORX 20 SHAFT (815-517) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 815-517

PROBE,LUMBAR(8350293) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 8350293

PROBE,THORACIC (8350294) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 8350294

DRIVER,SET SCREW 6.35 HEX (8350316) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 8350316

OBTURATOR, T25 (8350322) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 8350322

TAP,OSTEOGRIP 4.5MM (8350422) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 8350422

TAP,OSTEOGRIP 5.5MM (8350424) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 8350424

TAP,OSTEOGRIP 6.5MM (8350426) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 8350426

TAP,OSTEOGRIP 7.5MM (8350428) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 8350428

HANDLE,RATCHETING HANDLE (G900000) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: G900000

CASE,STERILE DRILL,BIT CASE,BASE (176-530) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 176-530

CASE,INSTRUMENT OUTER CASE (7081932) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7081932

CASE,UNIVERSAL INSTRUMENT TRAY (7082005) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7082005

CASE,PLATE HOLDING PIN CADDY LID (7082105) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7082105

CASE,DRILL BIT,CASE LID (9790901) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 9790901

HANDLE,UNIVERSAL (6650250) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 6650250

DRILL BIT,MM DRILL BIT S (7080510) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7080510

INSTRUMENT,PIN DRIVER (7080901) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7080901

INSTRUMENT,PLATE HOLDING PIN (7080902) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7080902

GUIDE,FIXED DRILL GUIDE (7080903) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7080903

GUIDE,VARIABLE DRILL GUIDE(7080904) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7080904

AWL,UNIVERSAL AWL (7080906) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7080906

DRIVER,2.5 HEX SCREWDRIVER (7080907) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7080907

AWL,FIXED ANGLE AWL (7080911) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7080911

INSTRUMENT,BALL TIP LOCK DRIVER (7080918) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7080918

INSTRUMENT,SCREW REMOVAL TOOL (7080919) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7080919

TAP,4.0X13MM TAP (7080920) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7080920

HOLDER,PLATE HOLDER (7080921) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7080921

LOCK SCREW DRIVER TRI-FLAT (7080930) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7080930

PLATE 7200025 ATL VISION ELITE 25MM "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7200025

BENDER,INSITU-RIGHT 4.75 (5484314) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 5484314

TRAY,LIFT BASKET-TRIPLE (1854106) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 1854106

INSTRUMENT,ROUND AWL INLINE HNDL (7480104) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7480104

INSTRUMENT,LEGAXY 5.5 ROCKER (7480142) "OR EQUAL ITEM"

LOCAL STOCK NUMBER: 7480142

B.3 DELIVERY SCHEDULE

13800 Veterans Way Orlando, FL 32827

SECTION C - CONTRACT CLAUSES

C.1 ADDENDUM to FAR 52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL ITEMS Clauses that are incorporated by reference (by Citation Number, Title, and Date), have the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available.

The following clauses are incorporated into 52.212-4 as an addendum to this contract:

C.2 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://www.acquisition.gov/far/index.html http://www.va.gov/oal/library/vaar/ (End of Clause)

52.204-18

52.204-19

COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE

INCORPORATION BY REFERENCE OF

REPRESENTATIONS AND CERTIFICATIONS

JUL 2016

DEC 2014

DEC 2013

C.3 52.219-14 LIMITATIONS ON SUBCONTRACTING (JAN 2017)

(a) This clause does not apply to the unrestricted portion of a partial set-aside.

(b) Applicability. This clause applies only to—

(1) Contracts that have been set aside or reserved for small business concerns or 8(a) participants;

(2) Part or parts of a multiple-award contract that have been set aside for small business concerns or 8(a) participants; and

(3) Orders set aside for small business or 8(a) participants under multiple-award contracts as described in 8.405-5 and 16.505(b)(2)(i)(F).

(c) By submission of an offer and execution of a contract, the Offeror/Contractor agrees that in performance of the contract in the case of a contract for—

(1) Services (except construction). At least 50 percent of the cost of contract performance incurred for personnel shall be expended for employees of the concern.

(2) Supplies (other than procurement from a nonmanufacturer of such supplies). The concern shall perform work for at least 50 percent of the cost of manufacturing the supplies, not including the cost of materials.

(3) General construction. The concern will perform at least 15 percent of the cost of the contract, not including the cost of materials, with its own employees.

(4) Construction by special trade contractors. The concern will perform at least 25 percent of the cost of the contract, not including the cost of materials, with its own employees.

(End of Clause)

C.4 VAAR 852.203-70 COMMERCIAL ADVERTISING (MAY 2018)

The Contractor shall not make reference in its commercial advertising to Department of Veterans Affairs contracts in a manner that states or implies the Department of Veterans Affairs approves or endorses the Contractor’s products or services or considers the Contractor’s products or services superior to other products or services.

C.5 VAAR 852.211-70 EQUIPMENT OPERATION AND MAINTENANCE MANUALS (NOV 2018)

The Contractor shall follow standard commercial practices to furnish manual(s), handbook(s) or brochure(s) containing operation, installation, and maintenance instructions, including pictures or illustrations, schematics, and complete repair/test guides, as necessary, for technical medical equipment and devices, and/or other technical and mechanical equipment provided per CLIN(s) 0001-0233. The manuals, handbooks or brochures shall be provided in hard copy, soft copy or with electronic access instructions, consistent with standard industry practices for the equipment or device. Where applicable, the manuals, handbooks or brochures will include electrical data and connection diagrams for all utilities. The documentation shall also contain a complete list of all replaceable parts showing part number, name, and quantity required.

(End of Clause)

C.6 VAAR 852.219-10 VA NOTICE OF TOTAL SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESS SET-ASIDE (JUL 2016)(DEVIATION)

(a) Definition. For the Department of Veterans Affairs, “Service-disabled veteran-owned small business concern or SDVSOB”:

(1) Means a small business concern:

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans or eligible surviving spouses (see VAAR 802.201 Surviving Spouse definition);

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans (or eligible surviving spouses) or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran;

(iii) The business meets Federal small business size standards for the applicable North American Industry Classification System (NAICS) code identified in the solicitation document;

(iv) The business has been verified for ownership and control pursuant to 38 CFR 74 and is so listed in the Vendor Information Pages database, (https://www.vip.vetbiz.gov); and

(v) The business will comply with subcontracting limitations in 13 CFR 125.6, as applicable

(2) “Service-disabled veteran” means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

(b) General.

(1) Offers are solicited only from verified service-disabled veteran-owned small business concerns. Offers received from concerns that are not verified service-disabled veteran-owned small business concerns shall not be considered.

(2) Any award resulting from this solicitation shall be made to a verified service-disabled veteran-owned small business concern.

(c) Agreement. A service-disabled veteran-owned small business concern agrees that in the performance of the contract, the concern will comply with the limitation on subcontracting requirements in 13 CFR §125.6.

(d) A joint venture may be considered a service-disabled veteran owned small business concern if the joint venture complies with the requirements in 13 CFR 125.15, provided that any reference therein to SDVO SBC is to be construed to apply to a VA verified SDVOSB as appropriate.

(e) Any service-disabled veteran-owned small business concern (non-manufacturer) must meet the requirements in FAR 19.102(f) of the Federal Acquisition Regulation to receive a benefit under this program.

(End of Clause)

C.7 VAAR 852.219-74 LIMITATIONS ON SUBCONTRACTING—MONITORING AND COMPLIANCE (JUL 2018)

(a) This solicitation includes VAAR 852.219-10 VA Notice of Total Service- Disabled Veteran-Owned Small Business Set-Aside.

(b) Accordingly, any contract resulting from this solicitation is subject to the limitation on subcontracting requirements in 13 CFR 125.6, or the limitations on subcontracting requirements in the FAR clause, as applicable. The Contractor is advised that in performing contract administration functions, the Contracting Officer may use the services of a support contractor(s) retained by VA to assist in assessing the Contractor's compliance with the limitations on subcontracting or percentage of work performance requirements specified in the clause. To that end, the support contractor(s) may require access to Contractor's offices where the Contractor's business records or other proprietary data are retained and to review such business records regarding the Contractor's compliance with this requirement.

(c) All support contractors conducting this review on behalf of VA will be required to sign an “Information Protection and Non-Disclosure and Disclosure of Conflicts of Interest Agreement” to ensure the Contractor's business records or other proprietary data reviewed or obtained in the course of assisting the Contracting Officer in assessing the Contractor for compliance are protected to ensure information or data is not improperly disclosed or other impropriety occurs.

(d) Furthermore, if VA determines any services the support contractor(s) will perform in assessing compliance are advisory and assistance services as defined in FAR 2.101, Definitions, the support contractor(s) must also enter into an agreement with the Contractor to protect proprietary information as required by FAR 9.505-4, Obtaining access to proprietary information, paragraph (b). The Contractor is required to cooperate fully and make available any records as may be required to enable the Contracting Officer to assess the Contractor's compliance with the limitations on subcontracting or percentage of work performance requirement.

(End of Clause)

C.8 VAAR 852.232-72 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS (NOV 2018)

(a) Definitions. As used in this clause—

(1) Contract financing payment has the meaning given in FAR 32.001;

(2) Designated agency office means the office designated by the purchase order, agreement, or contract to first receive and review invoices. This office can be contractually designated as the receiving entity. This office may be different from the office issuing the payment;

(3) Electronic form means an automated system transmitting information electronically according to the accepted electronic data transmission methods and formats identified in paragraph (c) of this clause. Facsimile, email, and scanned documents are not acceptable electronic forms for submission of payment requests;

(4) Invoice payment has the meaning given in FAR 32.001; and

(5) Payment request means any request for contract financing payment or invoice payment submitted by the contractor under this contract.

(b) Electronic payment requests. Except as provided in paragraph (e) of this clause, the contractor shall submit payment requests in electronic form. Purchases paid with a Government-wide commercial purchase card are considered to be an electronic transaction for purposes of this rule, and therefore no additional electronic invoice submission is required.

(c) Data transmission. A contractor must ensure that the data transmission method and format are through one of the following:

(1) VA’s Electronic Invoice Presentment and Payment System at the current website address provided in the contract.

(2) Any system that conforms to the X12 electronic data interchange (EDI) formats established by the Accredited Standards Center (ASC) and chartered by the American National Standards Institute (ANSI).

(d) Invoice requirements. Invoices shall comply with FAR 32.905.

(e) Exceptions. If, based on one of the circumstances in this paragraph (e), the Contracting Officer directs that payment requests be made by mail, the Contractor shall submit payment requests by mail through the United States Postal Service to the designated agency office. Submission of payment requests by mail may be required for—

(1) Awards made to foreign vendors for work performed outside the United States;

(2) Classified contracts or purchases when electronic submission and processing of payment requests could compromise the safeguarding of classified or privacy information;

(3) Contracts awarded by contracting officers in the conduct of emergency operations, such as responses to national emergencies;

(4) Solicitations or contracts in which the designated agency office is a VA entity other than the VA Financial Services Center in Austin, Texas; or

(5) Solicitations or contracts in which the VA designated agency office does not have electronic invoicing capability as described above.

(End of Clause)

C.9 VAAR 852.237-70 CONTRACTOR RESPONSIBILITIES (APR 1984)

The contractor shall obtain all necessary licenses and/or permits required to perform this work. He/she shall take all reasonable precautions necessary to protect persons and property from injury or damage during the performance of this contract. He/she shall be responsible for any injury to himself/herself, his/her employees, as well as for any damage to personal or public property that occurs during the performance of this contract that is caused by his/her employees fault or negligence, and shall maintain personal liability and property damage insurance having coverage for a limit as required by the laws of the State of Florida. Further, it is agreed that any negligence of the Government, its officers, agents, servants and employees, shall not be the responsibility of the contractor hereunder with the regard to any claims, loss, damage, injury, and liability resulting there from.

(End of Clause)

C.10 VAAR 852.246-71 REJECTED GOODS (OCT 2018)

(a) Supplies and equipment. Rejected goods will be held subject to Contractor’s order for not more than 15 days, after which the rejected merchandise will be returned to the Contractor’s address at the Contractor’s risk and expense. Expenses incident to the examination and testing of materials or supplies that have been rejected will be charged to the Contractor.

(b) Perishable supplies. The Contractor shall remove rejected perishable supplies within 48 hours after notice of rejection. Supplies determined to be unfit for human consumption will not be removed without permission of the local health authorities. Supplies not removed within the allowed time may be destroyed. The Department of Veterans Affairs will not be responsible for, nor pay for, products rejected. The Contractor will be liable for costs incident to examination of rejected products.

C.11 VAAR 852.247-71 DELIVERY LOCATION (OCT 2018)

Shipment of deliverable items, other than reports, shall be to:

Department of Veterans Affairs Orlando VA Medical Center 13800 Veterans Way Orlando Fl 32827 (End of Clause)

C.12 VAAR 852.247-74 ADVANCE NOTICE OF SHIPMENT (OCT 2018)

10 work days prior to shipping item(s) the Contractor shall furnish the anticipated shipment date, bill of lading number (if applicable), and carrier identity to TBD and to the Contracting Officer.

(End of Clause)

(End of Addendum to 52.212-4)

C.13 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO

IMPLEMENT STATUTES OR EXECUTIVE ORDERS—COMMERCIAL ITEMS

(AUGUST 2019)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204–23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L.

115–91).

(3) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).

(4) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(5) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[X] (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

[] (2) 52.203-13, Contractor Code of Business Ethics and Conduct (OCT 2015) (41 U.S.C.

3509).

[] (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

[X] (4) 52.204–10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2018) (Pub. L. 109–282) (31 U.S.C. 6101 note).

[] (5) [Reserved] [] (6) 52.204–14, Service Contract Reporting Requirements (OCT 2016) (Pub. L.