36C24619Q1131-000.docx

FedBizOpps Sources Sought Notice

CLASSIFICATION CODE

SUBJECT

CONTRACTING OFFICE'S

ZIP-CODE

SOLICITATION NUMBER

RESPONSE DATE (MM-DD-YYYY)

ARCHIVE

DAYS AFTER THE RESPONSE DATE

RECOVERY ACT FUNDS

SET-ASIDE

NAICS CODE

CONTRACTING OFFICE

ADDRESS

POINT OF CONTACT

(POC Information Automatically Filled from User Profile Unless Entered)

DESCRIPTION

See Attachment

AGENCY'S URL

URL DESCRIPTION

AGENCY CONTACT'S EMAIL

ADDRESS

EMAIL DESCRIPTION

ADDRESS

POSTAL CODE

COUNTRY

ADDITIONAL INFORMATION

GENERAL INFORMATION

PLACE OF PERFORMANCE

* = Required Field FedBizOpps Sources Sought Notice Rev. March 2010

BIOPRINTING

23667 36C24619Q1131 09-10-2019 N 541715 Department of Veterans Affairs Network Contracting Office 6 100 Emancipation Drive Hampton VA 23667 Ronnie Gregory Richmond VA Medical Center 1201 Broad Rock Blvd.

23249

USA

Ronnie.Gregory@va.gov THIS IS A SOURCES SOUGHT NOTICE ONLY. This notice does NOT constitute a request for proposal, request for quote, or invitation for bid. No formal solicitation document exists at this time. We are seeking information for market research purposes only. The Government will not pay for any information solicited.

The VHA Network Contracting Office 6 (NCO 6) is conducting a market survey to find qualified vendors who can provide the following items, manufactured by Advance Solutions Life Sciences, LLC, for the Richmond VA Medical Center, 1201 Broad Rock Blvd. Richmond, VA 23249 BIOASSEMBLYBOT ® ADVANCE SERIES 3D BIO-PRINTER. PLEASE SEE LOWER ATTACHMENT OF THE ENTIRE LIST OF REQUIRE ITEMS.

Please see the attachment below for the list of items;

This is a Brand Name or similar request.

All interested parties should respond, in writing via email to Ronnie.Gregory@va.gov. No telephone inquiries will be accepted. In response, please include the following:

· Company/individual name,

· Address,

· Point of contact with phone number

· Information describing your interest,

· Indicate FSS/GSA contract number or Open Market, as applicable

· FSS Category you qualify for

· Tax ID number

· DUNS number

· Capabilities statement

· Company Socio-Economic SIZE (example…large, small, SDVOSB, VOSB, WOSB etc.)

· Authorized distributor/dealer letter, if applicable

If your firm is a Service-Disabled Veteran Owned or Veteran Owned Small Business, you must be CERTIFIED in VetBiz (see internet site: http://vip.vetbiz.gov).

The NAICS 541715 is applicable to this acquisition; with a size standard of 1000 Employees.

Interested firms are reminded that in accordance with FAR 4.1201(a) Prospective contractors shall complete electronic annual representations and certifications at the System for Award Management (SAM) as a part of required registration in conjunction with FAR 4.1102(a) that states, Prospective contractors shall be registered in the (SAM) database prior to award of a contract or agreement. Therefore, due to time constraints, vendors must be registered in System for Award Management (SAM) at http://www.sam.gov to be considered for an award.

Your response is required by 12:00 PM EST on September 10, 2019.

ASLS-000136 1 Advanced Solutions Life Sciences Professional Services Senior Scientist Hourly Rate QUOT 420 HR

ASLS-0000124 2 VIPMT - haMV Human Adipose Microvessels Unit Size: 100K aliquot Includes freshly isolated, whole, intact adult human microvessels for laboratory use only. Shipped in frozen vial. 21 EA

ASLS-0000172 3 Estimated budget for Animal/Human Demineralized Bone Material 1 EA

ASLS-0000100 4 BioAssemblyBotr Advanced Series 3D Bio-printer Includes: (1) 6-axis robot [ANSI/RIA

R15.06-1999/CE/JIS B 8433/UL1740], (1)

BioAssemblyBotr Controller, Workstation access from three sides with door safety switches, (1) 300mm (11.8") width x 250mm (9.8") depth print stage, (8) Syringe tool staging rack, (1) Tip detection station, (1) Laser distance sensing and calibrator system, (1) Fixed mount HD 1080p (up to1600 x 1200 pixels) video camera with print recording capability,(4) LED workstation lights, (1) 586.1 kPa (85 psi) integrated pneumatic dispensing system, (1) Integrated HMI video display and connecting arm, (1) 208-220 20 Amp with a NEMA 6-20Rpower connector, (1) RJ45 CAT-5, (2) USB inputs, (1) 6.35mm (1/4") Pneumatic air connection ** UL Certified ** 1 EA

ASLS-0000109 5 BioAssemblyBotr Advanced Integrated Temperature Controlled Print Stage 1 EA

ASLS-0000108 6 Round Inline Exhaust Fan, 4" Duct (167 CFM). HEPA filters capture 99.97% of particles down to

0.3 microns 1 EA

ASLS-0000103 7 BioAssemblyBotr Advanced 5cc ambient syringe tool 1 EA

ASLS-0000102 8 BioAssemblyBotr Advanced 10cc ambient syringe tool 1 EA

ASLS-0000101 9 BioAssemblyBotr Advanced 30cc ambient syringe tool 1 EA

ASLS-0000107 10 BioAssemblyBotr Advanced 30cc ambient syringe tool with UV Curing Tool 1 EA

ASLS-0000105 11 BioAssemblyBotr Advanced 30cc cold controlled syringe tool 1 EA

ASLS-0000104 12 BioAssemblyBotr Advanced 30cc heat controlled syringe tool 1 EA

ASLS-0000106 13 BioAssemblyBotr Advanced dual syringe barrel dispenser with mixing channel 1 EA

ASLS-0000117 14 TSIMr Software Annual Desktop Subscription Single-User (3-year) 10 EA

ASLS-0000159 15 TSIMr Software Annual Desktop Subscription Single-User (3-year) 1 EA

ASLS-0000119 16 BioAssemblyBotT Advanced Onsite Services (Daily Rate)

(A) A certified BioAssemblyBotT Engineer provides onsite setup, configuration and training for up to 10 customer employees. Training includes hands on building of Tissue Models in TSIM and 3D printing using customer specific examples. (B) Travel expenses are invoiced at cost.

Customer must authorize expected travel expenses prior to a visit being scheduled. 1 EA