P09 SOW Dental instruments.docx

VHA New Jersey Health Care System Initial Outfitting, Transition & Activation Statement of Work 3 Day Dental Supply/instruments sets (JSN: U0085)

VHA New Jersey Health Care System Toms River VA Clinic 1051 Hooper Avenue Toms River, NJ 08753 Introduction The VHA New Jersey Health Care System has a requirement to purchase 3 Day Dental Supply/instruments sets (JSN: U0085) with an authorized vendor to supply and deliver the item(s) identified in Table 1 below to properly outfit 8 Dental Treatment Rooms. See salient characteristics below. This is a Brand Name or Equal Requirement. This requirement is in support of the activation of the New Toms River VA Clinic. HuFriedyGroup is the basis of design.

Table 1 – Package Items Summary

Additional Item Requirements The vendor will provide service manuals that includes theory of operation, maintenance requirements, repair information, schematics, part lists and troubleshooting information in electronic format for use by the VA HTM Department.

Date of manufacture must not be greater than 2 years before the purchase order date. The equipment must not be used or refurbished and must have the latest manufacturer’s software/hardware updates installed. Any batteries provided with the unit will not be manufactured more than 12 months before the purchase order issue date.

General Conditions Site Address The address of the Toms River VA Clinic is provided below.

1055 Hooper Avenue Toms River, NJ 08753

Delivery Schedule Items shall be delivered no earlier than the estimated delivery start date and no later than the delivery end date listed in Table 2 below.

Table 2 – Anticipated Building Outfitting Schedule

Schedule and Order Management The above delivery schedule is based upon the current construction schedule due to the nature of activation efforts and construction timelines and dates may vary and shift. Delivery dates need to be flexible. The delivery of items for installation are dependent upon the completion of applicable areas within the building. If there is a delay, the Contractor may be required to adjust the delivery date at no cost to the Government. The Contractor will coordinate with the on-site POC’s before delivery.

The awardee’s actual delivery dates will be confirmed by VA upon award.

Post-award, the vendor will coordinate delivery identified in this document with the VA prior to beginning any work (See Section 2.4). Once the dates have been confirmed, modifications to the schedule are subject to written approval by the CO, COR, and the vendor.

Delivery and Receiving Delivery and receipt of the proposed items is anticipated to be directed to the location identified below. Confirmation of delivery location will be provided post-award.

☒ Toms River VA Clinic (Direct Delivery to address detailed in paragraph 2.1)

☐ IOT&A Contractor Provided warehouse:

Liberty Warehouse C/O SME Solutions 40 Industrial Rd Berkeley Heights, NJ 07922 The vendor is required to define the need for a staging area to accommodate item delivery, if needed. Post-award, this information will be confirmed with the vendor.

The delivery of items identified in this document shall take place during normal loading dock business hours which are defined as: 8:00 AM to 3:30 PM Eastern Standard Time, Monday through Friday, and excluding Federal Holidays.

Delivery trucks will not be permitted to remain in the receiving area. Trucks shall be unloaded, moved from the receiving area, and then brought back to the receiving area if required to haul out any waste, tools, or excess materials.

Labeling of delivered items shall include the VA facilities contract number and VA purchase order number for identification and reference upon receipt of product.

Clean Up and Disposal There are no dumpsters available for vendor use.

The removal of waste and/or excess material shall be conducted through the loading dock area.

Assembly, Installation, and Calibration Required (Yes ☐ No ☒) The vendor is not required to manage and coordinate installation at the Toms River VA Clinic with the COR or his representative IOT&A POC.

Training Required (Yes ☐ No ☒)

2.8 Confidentiality and Non-Disclosure

1.1 This equipment Does Not connect to a VA network. Therefore, in accordance with Appendix A, Handbook 6500.6 Checklist, block 6, the C&A requirements Do Not apply to this requirement, and a Security Accreditation Package is Not required.

Salient Characteristics 3 Day Dental Supply (JSN: U0085) Total Quantity: 1 ☐ Network Required if Checked ☐ Manufacturer Certified Installation Required if Checked ☐ BMET Training Required if Checked ☐ End User Training Required if Checked

Basis of Design is HuFriedyGroup

Brand Name or Equal Requirement

Description: Dental instruments used in routine procedures when seeing patients. Three days’ worth of supplies to ensure there is no delay in care in having to wait for supplies to be cleaned & sterilized. The dental supplies shall have the following Salient Characteristics:

Salient Characteristics:

DIAGNOSTIC INSTRUMENTS:

5 Explorer with #6 Satin Steel Handle Manufacturer Brand Name: HU-FRIEDY, Model EXD56 as follows:

Specifications/Salient Characteristics

· Used for caries and calculus detection, exploration of pocket characteristics, furcation's and restorations.

· Crafted from Duraspond steel, a specially blended steel alloy which provides flexibility and resilience for even the most precise diagnostic procedures.

· Ergonomically designed Satin Steel Handle

· High quality stainless steel

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

· fracture or corrosion

CP-10 Color Coded Probe with Satin Steel Handle Manufacturer Brand Name: HU-FRIEDY, Model PCP126 as follows:

Specifications/Salient Characteristics

· 1-2-3-5-7-8-9-10 markings

· Color coded for accuracy

· Smoothly finished black markings

· No chipping, flaking or fading

· Ergonomically designed Satin Steel Handle

· Handcrafted with Immunity Steel for optimal strength and corrosion resistance

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

CP-15 University of North Carolina Color Coded Probe, #6 Satin Steel Handle Manufacturer Brand Name: HU-FRIEDY, Model PCPUNC156 as follows:

Specifications/Salient Characteristics

· 1-2-3-4-5-6-7-8-9-10-11-12-13-14-15 markings

· Color coded for accuracy

· Smoothly finished black markings

· No chipping, flaking or fading

· Ergonomically designed Satin Steel Handle

· Handcrafted with Immunity Steel for optimal strength and corrosion resistance

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

23/CP-12 Color-Coded Expro #6 Satin Steel Handle Manufacturer Brand Name: HU-FRIEDY, Model XP23/126 as follows:

Specifications/Salient Characteristics

· 12-9-6-3 markings

· Color coded for accuracy

· Smoothly finished black markings

· No chipping, flaking or fading

· Ergonomically designed Satin Steel Handle

· Handcrafted with Immunity Steel for optimal strength and corrosion resistance

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

#6 Cone Socket Mirror Handle Manufacturer Brand Name: HU-FRIEDY, Model MH6 as follows:

Specifications/Salient Characteristics

· Cone Socket Mirror Handle used with Single and Double-Sided Cone Socket Mirrors

· Bunt end of the mirror handle is ideal for testing sensitivity to percussion and assessing tooth mobility

· Ergonomically designed Satin Steel Handle

· Handcrafted with Immunity Steel for optimal strength and corrosion resistance

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

2 College Pliers Manufacturer Brand Name: HU-FRIEDY, Model DP2 as follows:

Specifications/Salient Characteristics

· Use to grasp or transfer materials in or out of the oral cavity

· Medium length, thin beak

· Guide pin with pin stop to prevent over compression

· Made heavy gauge stainless steel to prevent bending and misaligning

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

U17 Utility Pick-up Dressing Pliers Manufacturer Brand Name: HU-FRIEDY, Model DPU17 as follows:

Specifications/Salient Characteristics

· Used to grasp or transfer materials in or out of the oral cavity

· Ideal for transporting contaminated/soiled objects; cotton gauze squares; rubber dam material, carbon burs, etc.

· Features a serrated tip for a positive grip

· Made heavy gauge, heat treated stainless steel to prevent bending and misaligning

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

3 Front Surface High-Definition Mouth Mirror Manufacturer Brand Name: HU-FRIEDY, Model MIR3HD as follows:

Specifications/Salient Characteristics

· Size 3 single sided high-definition mouth mirror

· 113% reflection factor for exceptional image clarity

· 38.5% brighter than rhodium coated mirrors

· Scratch resistant for product longevity

5 Front Surface Mouth Mirror Manufacturer Brand Name: HU-FRIEDY, Model MIR5 as follows:

Specifications/Salient Characteristics

· Size 5 front surface mouth mirror

· Rhodium coating to resist scratching front surface for sharp and distortion free image

5 Double Sided Mouth Mirror Manufacturer Brand Name: HU-FRIEDY, Model MIR5DS as follows:

Specifications/Salient Characteristics

· Size 5 double sided mouth mirror

· Rhodium coating to resist scratching front surface for sharp and distortion free image

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

HYGIENE INSTRUMENTS:

H5/33 Hygienist-Jacquette Scaler; EverEdge 2.0, Solid Cone Manufacturer Brand Name: HU-FRIEDY, Model SH5/33C9E2 as follows:

Specifications/Salient Characteristics

· Super-thin sickle scaler combined with a straight sickle blade; for scaling interproximal and cervical areas of anterior teeth

· Ergonomically designed EverEdge handle, solid purple cone

· EverEdge® 2.0 scalers are the sharpest and longest-lasting scalers on the market. Using a superior heat treatment process, enhanced finishing process and an optimized steel, EverEdge 2.0 edges are scientifically measured to be over 72% sharper than the next closest competitor

· Stainless steel alloy that is durable and keeps instruments sharper longer

· Finely honed finish to the instrument blade for super sharp edges and efficient scaling

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

204S Anterior Sickle; EverEdge 2.0, Solid Cone Manufacturer Brand Name: HU-FRIEDY, Model S204SC9YE2 as follows:

Specifications/Salient Characteristics

· For posterior supra-gingival interproximal scaling

· Ergonomically designed EverEdge handle, solid yellow cone

· EverEdge® 2.0 scalers are the sharpest and longest-lasting scalers on the market. Using a superior heat treatment process, enhanced finishing process and an optimized steel, EverEdge 2.0 edges are scientifically measured to be over 72% sharper than the next closest competitor

· Stainless steel alloy that is durable and keeps instruments sharper longer

· Finely honed finish to the instrument blade for super sharp edges and efficient scaling

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Nevi 4 Scaler; EverEdge 2.0, Solid Cone Manufacturer Brand Name: HU-FRIEDY, Model SCNEVI4C9YE2 as follows:

Specifications/Salient Characteristics

· Tapered, dual cutting blades provide precise access for effective deposit removal

· Increase shank rigidity provides for effective removal of burnished, heavy and tenacious deposits

· Ergonomically designed EverEdge handle, solid yellow cone

· EverEdge® 2.0 scalers are the sharpest and longest-lasting scalers on the market. Using a superior heat treatment process, enhanced finishing process and an optimized steel, EverEdge 2.0 edges are scientifically measured to be over 72% sharper than the next closest competitor

· Stainless steel alloy that is durable and keeps instruments sharper longer

· Finely honed finish to the instrument blade for super sharp edges and efficient scaling

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

13/14 Columbia University Curette; EverEdge 2.0, Solid Cone Manufacturer Brand Name: HU-FRIEDY, Model SC13/14C9YE2 as follows:

Specifications/Salient Characteristics

· Posterior universal curette

· Columbia curette designed with two cutting edges and a round toe for use on posterior surfaces

· For use on all surfaces

· Ergonomically designed EverEdge handle, solid yellow cone

· EverEdge® 2.0 scalers are the sharpest and longest-lasting scalers on the market. Using a superior heat treatment process, enhanced finishing process and an optimized steel, EverEdge 2.0 edges are scientifically measured to be over 72% sharper than the next closest competitor

· Stainless steel alloy that is durable and keeps instruments sharper longer

· Finely honed finish to the instrument blade for super sharp edges and efficient scaling

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

5/6 Barnhart Curette; Satin Steel Handle Manufacturer Brand Name: HU-FRIEDY, Model SBH5/66 as follows:

Specifications/Salient Characteristics

· Barnhart Universal Curette designed with two cutting edges and a round toe for use on posterior surfaces

· For use on all surfaces

· Ergonomically designed Satin Steel Handle

· Handcrafted with Immunity Steel for optimal strength and corrosion resistance

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Gracey Curette 11/12; EverEdge 2.0, Solid Cone Manufacturer Brand Name: HU-FRIEDY, Model SG11/12C9YE2 as follows:

Specifications/Salient Characteristics

· Area specific to allow for deep scaling, root planning and periodontal debridement

· Angulated to reach mesial surfaces of posterior teeth

· Ergonomically designed EverEdge handle, solid yellow cone

· EverEdge® 2.0 scalers are the sharpest and longest-lasting scalers on the market. Using a superior heat treatment process, enhanced finishing process and an optimized steel, EverEdge 2.0 edges are scientifically measured to be over 72% sharper than the next closest competitor

· Stainless steel alloy that is durable and keeps instruments sharper longer

· Finely honed finish to the instrument blade for super sharp edges and efficient scaling

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Gracey Curette 13/14; EverEdge 2.0, Solid Cone Manufacturer Brand Name: HU-FRIEDY, Model SG13/14C9YE2 as follows:

Specifications/Salient Characteristics

· Area specific to allow for deep scaling, root planning and periodontal debridement

· Angulated to reach distal surfaces of posterior teeth

· Ergonomically designed EverEdge handle, solid yellow cone

· EverEdge® 2.0 scalers are the sharpest and longest-lasting scalers on the market. Using a superior heat treatment process, enhanced finishing process and an optimized steel, EverEdge 2.0 edges are scientifically measured to be over 72% sharper than the next closest competitor

· Stainless steel alloy that is durable and keeps instruments sharper longer

· Finely honed finish to the instrument blade for super sharp edges and efficient scaling

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Gracey Curette 17/18; EverEdge 2.0, Solid Cone Manufacturer Brand Name: HU-FRIEDY, Model SG17/18CCHE2 as follows:

Specifications/Salient Characteristics

· Offset blade provides a perfect working angulation for the tooth surface.

· Offset blade angulation means only the lower cutting edge of each blade is used.

· Ergonomically designed EverEdge handle, solid blue cone

· EverEdge® 2.0 scalers are the sharpest and longest-lasting scalers on the market. Using a superior heat treatment process, enhanced finishing process and an optimized steel, EverEdge 2.0 edges are scientifically measured to be over 72% sharper than the next closest competitor

· Stainless steel alloy that is durable and keeps instruments sharper longer

· Finely honed finish to the instrument blade for super sharp edges and efficient scaling

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Immunity Steel™ Pumice Cup, Modified Manufacturer Brand Name: HU-FRIEDY, Model PCUPM as follows:

Specifications/Salient Characteristics

· Used to hold prophy paste or medicaments

· Made of corrosion resistant, acid-proof stainless steel

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

RESTORATIVE INSTRUMENTS:

Goldstein 2 Flexi-Thin XTS Composite Instrument Manufacturer Brand Name: HU-FRIEDY, Model TNCIGFT2 as follows:

Specifications/Salient Characteristics

· Universal style instrument used for final placement and contouring of Class I, II and III restorations

· Can also be used for packing gingival retraction cord

· XTS coating optimizes the nonstick placement of composite material without discoloring the restoration

· Ergonomically designed handle smooth Satin Steel Handle

· Handcrafted with Immunity Steel for optimal strength and corrosion resistance

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

#2 Woodson Composite/Plastic Filling Instrument, Satin Steel Handle Manufacturer Brand Name: HU-FRIEDY, Model PFIWDS26 as follows:

Specifications/Salient Characteristics

· Highly polished stainless-steel instrument used for composite placement and contouring

· 3.0mm/2.4mm working ends

· Ergonomically designed Satin Steel Handle

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

4/5 Gregg Composite Instruments, Satin Steel Manufacturer Brand Name: HU-FRIEDY, Model PFIG4/56 as follows:

Specifications/Salient Characteristics

· Off-angled blades allow easy adaptability to mesial and distal surfaces of posterior teeth, providing increased interproximal access and better visibility of the working area

· Application: Class II, V

· Ergonomically designed Satin Steel Handle

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Excavator 18 with Satin Steel Handle Manufacturer Brand Name: HU-FRIEDY, Model EXC186 as follows:

Specifications/Salient Characteristics

· Used for the removal of carious dentin

· 1.5mm

· Ergonomically designed Satin Steel Handle

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Balshi Gingival Cord Packer Manufacturer Brand Name: HU-FRIEDY, Model GCPBAL as follows:

Specifications/Salient Characteristics

· Small, thin blade shape for atraumatic and accurate cord placement

· Non-serrated

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Marquette Condenser 0/1 Non-Serrate, Satin Steel Handle Manufacturer Brand Name: HU-FRIEDY, Model PLG0/1NS6 as follows:

Specifications/Salient Characteristics

· Condenser used to pack filling materials into cavity preparations

· 1.0mm – 1.4mm

· Non-serrated

· Ergonomically designed Satin Steel Handle

· Surgical grade stainless steel provides corrosion resistance and longevity

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

1 Hollenback Plugger, Satin Steel Handle Manufacturer Brand Name: HU-FRIEDY, Model PLGH16 as follows:

Specifications/Salient Characteristics

· Plugger used to pack filling materials into cavity preparations

· 1.0 mm – 1.65 mm

· Ergonomically designed Satin Steel Handle

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

3S Hollenback Carver, Satin Steel Handle Manufacturer Brand Name: HU-FRIEDY, Model CVHL3S6 as follows:

Specifications/Salient Characteristics

· Used to place, contour and cave amalgam

· Design characteristics similar to 1/2 Hollenback but with slightly larger blades

· Ergonomically designed Satin Steel Handle

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Discoid-Cleoid Carver 3/6, Satin Steel Handle Manufacturer Brand Name: HU-FRIEDY, Model CD3/66 as follows:

Specifications/Salient Characteristics

· Used to carve anatomical features and trim excess materials

· 3.0 mm working ends

· Ergonomically designed Satin Steel Handle

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

21 Burnisher, Satin Steel Handle Manufacturer Brand Name: HU-FRIEDY, Model BB216 as follows:

Specifications/Salient Characteristics

· Used to blend materials for final contouring to achieve sculpting of areas like grooves, fissures or pits

· Can also be used to form occlusal anatomy

· 2.7 mm - 1.7 mm

· Ergonomically designed Satin Steel Handle

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion 27/29 Burnisher, Satin Steel Handle Manufacturer Brand Name: HU-FRIEDY, Model BB27/296 as follows:

Specifications/Salient Characteristics

· Used to blend materials for final contouring to achieve sculpting of areas like grooves, fissures or pits

· Can also be used to form occlusal anatomy

· 1.6 mm - 3.1 mm

· Ergonomically designed Satin Steel Handle

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Miller Articulating Paper Forceps Manufacturer Brand Name: HU-FRIEDY, Model APF2 as follows:

Specifications/Salient Characteristics

· Used for holding articulating paper when checking occlusion of dental restorations and teeth

· Use of paper forceps assures better and complete coverage of the restoration or teeth to be verified

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

7 Novatech Spatula & Blade Manufacturer Brand Name: HU-FRIEDY, Model CSNT7 as follows:

Specifications/Salient Characteristics

· Short, rigid spatula for heavy cements

· Blade end used to place cements or shape temporary restorations

· Designed with a large, knurled hexagon handle to ensure secure instrument control

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

#7 Wax Spatula Manufacturer Brand Name: HU-FRIEDY, Model WS7 as follows:

Specifications/Salient Characteristics

· For mixing materials and general laboratory use

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

· Made of high-quality stainless steel

#31 Wax Spatula Manufacturer Brand Name: HU-FRIEDY, Model SPT31 as follows:

Specifications/Salient Characteristics

· For mixing materials and general laboratory use

· 12.5mm/10.7mm

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Temporary Crown Remover Manufacturer Brand Name: HU-FRIEDY, Model CRGR as follows:

Specifications/Salient Characteristics

· Carbide inserts for enhanced grip

· 60⁰ curved beak offers improved intraoral visibility

· Slender design provides increased patient comfort

· Gold-plated handle for quick and easy identification

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

ENDO INSTRUMENTS:

#16 Endo Explorer, Satin Steel Handle Manufacturer Brand Name: HU-FRIEDY, Model EXDG166 as follows:

Specifications/Salient Characteristics

· Endodontic explorer, used to locate and enlarge the root canal orifice

· Tips are sharp and strong, angulations are ideal for anterior and posterior applications

· Ergonomically designed Satin Steel Handle

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

1 Abou-Rass Excavator Manufacturer Brand Name: HU-FRIEDY, Model MAR-C1 as follows:

Specifications/Salient Characteristics

· 1 mm Long-shanked Abou-Rass Curette

· Useful for access into difficult and confined areas.

· .8mm working ends

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Endo Spreader D11T, Satin Steel Handle Manufacturer Brand Name: HU-FRIEDY, Model RCSD11T6 as follows:

Specifications/Salient Characteristics

· Root canal spreader used to compact filling material during lateral condensation.

· .23mm working end, single ended

· Ergonomically designed handle

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

· Ergonomically designed handle

5/7 Endo Plugger, Satin Steel Handle Manufacturer Brand Name: HU-FRIEDY, Model RCP5/76 as follows:

Specifications/Salient Characteristics

· 5/7 double ended plugger for root canal

· Used to compact filling material during vertical condensation

· .50mm and .75mm diameter working ends

· Ergonomically designed Satin Steel Handle

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Glick Blade/Endo Plugger, Satin Steel Handle Manufacturer Brand Name: HU-FRIEDY, Model RCPGL16 as follows:

Specifications/Salient Characteristics

· Used to compact filling material during vertical condensation

· Combination blade and 1.10 marked plugger

· Plugger on one end with a blade for cutting gutta percha on the other working end

· Versatile and flexible

· Ergonomically designed Stain Steel Handle

· Surgical grade stainless steel provides corrosion resistance and longevity

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Rubber Dam Forceps Manufacturer Brand Name: HU-FRIEDY, Model RDF as follows:

Specifications/Salient Characteristics

· 17cm (6 ½”) rubber dam forceps

· Essential for efficient treatment

· Features as attachment design which makes it easy to pick up and place rubber dam clamps

· Made from German stainless steel

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Rubber Dam Frame Adult 6” Manufacturer Brand Name: HU-FRIEDY, Model RDAF6 RDCM2as follows:

Specifications/Salient Characteristics

· U-Shaped frame used to hold rubber dam material in place for isolation

· 15cm/6" diameter

· Matte finish helps reduce glare caused by operatory lights for less eye fatigue

· Made from a proprietary blend of steel - Satin Steel™ - providing corrosion resistance

· Handcrafted to precise specifications and exacting quality standards

· Heat treated for maximum strength and a secure fit

· Designed with a perfect balance between strength, flexibility and "memory”

#0 Satin Steel Rubber Dam Clamps Manufacturer Brand Name: HU-FRIEDY, Model RDCM0 as follows:

Specifications/Salient Characteristics

· Flat jaws and high bow for longer premolars

· Matte finish helps reduce glare caused by operatory lights for less eye fatigue

· Made from a proprietary blend of steel - Satin Steel™ - providing corrosion resistance

· Handcrafted to precise specifications and exacting quality standards

· Heat treated for maximum strength and a secure fit

· Designed with a perfect balance between strength, flexibility and "memory”

#12A Satin Steel Rubber Dam Clamps Manufacturer Brand Name: HU-FRIEDY, Model RDCM12A as follows:

Specifications/Salient Characteristics

· Serrated offset jaws for lower right molars

· Satin steel for lower molar design

· Paired with RDCM13A

· Matte finish helps reduce glare caused by operatory lights for less eye fatigue

· Made from a proprietary blend of steel - Satin Steel™ - providing corrosion resistance

· Handcrafted to precise specifications and exacting quality standards

· Heat treated for maximum strength and a secure fit

· Designed with a perfect balance between strength, flexibility and "memory”

#13A Satin Steel Rubber Dam Clamps Manufacturer Brand Name: HU-FRIEDY, Model RDCM13A as follows:

Specifications/Salient Characteristics

· Serrated offset jaws for lower left molars

· Satin steel for lower molar design

· Paired with RDCM12A

· Matte finish helps reduce glare caused by operatory lights for less eye fatigue

· Made from a proprietary blend of steel - Satin Steel™ - providing corrosion resistance

· Handcrafted to precise specifications and exacting quality standards

· Heat treated for maximum strength and a secure fit

· Designed with a perfect balance between strength, flexibility and "memory”

#2 Satin Steel Rubber Dam Clamps Manufacturer Brand Name: HU-FRIEDY, Model RDCM2 as follows:

Specifications/Salient Characteristics

· Flat jaws for premolars

· Matte finish helps reduce glare caused by operatory lights for less eye fatigue

· Made from a proprietary blend of steel - Satin Steel™ - providing corrosion resistance

· Handcrafted to precise specifications and exacting quality standards

· Heat treated for maximum strength and a secure fit

· Designed with a perfect balance between strength, flexibility and "memory”

#56S Satin Steel Rubber Dam Clamps Manufacturer Brand Name: HU-FRIEDY, Model RDCM56S as follows:

Specifications/Salient Characteristics

· Slightly festooned serrated jaws for large partially erupted or irregular shaped molars

· Matte finish helps reduce glare caused by operatory lights for less eye fatigue

· Made from a proprietary blend of steel - Satin Steel™ - providing corrosion resistance

· Handcrafted to precise specifications and exacting quality standards

· Heat treated for maximum strength and a secure fit

· Designed with a perfect balance between strength, flexibility and "memory”

SURGICAL INSTRUMENTS:

#34S Seldin Straight Elevator Manufacturer Brand Name: HU-FRIEDY, Model E34S as follows:

Specifications/Salient Characteristics

· Used to loosen the tooth from the periodontal ligament and ease extraction

· 34S elevator has a thinner tip and more narrow shank than the #34

· Elevators with textured finger facets on handle for stronger grip

· Shank reinforced inside handle for greater strength

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subject to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

#301 Apexo Elevator Manufacturer Brand Name: HU-FRIEDY, Model E301 as follows:

Specifications/Salient Characteristics

· Used to loosen the tooth from the periodontal ligament and ease extraction

· Designed for displacement of deeply seated roots

· Elevators with textured finger facets on handle for stronger grip

· Shank reinforced inside handle for greater strength

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subject to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

8 Crane Pick Elevator Manufacturer Brand Name: HU-FRIEDY, Model E8 as follows:

Specifications/Salient Characteristics

· Used to loosen tooth from periodontal ligament and ease extraction

· Elevators with textured finger facets on handle for stronger grip

· Shank reinforced inside handle for greater strength

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subject to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

#77R Hu-Friedy Serrated Elevator Manufacturer Brand Name: HU-FRIEDY, Model E77R as follows:

Specifications/Salient Characteristics

· Used to loosen the tooth from the periodontal ligament and ease extraction; 3.0mm

· Upper posterior roots and upper 3rd molars

· Elevators with textured finger facets on handle for stronger grip

· Shank reinforced inside handle for greater strength

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subject to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

#5 Scalpel Blade Holder Manufacturer Brand Name: HU-FRIEDY, Model 10-130-05 as follows:

Specifications/Salient Characteristics

· Finely balanced, pen-like scalpel with fingertip control for easy rotation

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subject to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

#9 Molt Periosteal Elevator Manufacturer Brand Name: HU-FRIEDY, Model P9 as follows:

Specifications/Salient Characteristics

· Designed for reflecting and retracting the mucoperiosteum after incisions of the gingival tissue

· 4.3mm/8.4mm

· Designed with a large, knurled hexagon handle to ensure secure instrument control

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

#23 Seldin Periosteal Elevator Manufacturer Brand Name: HU-FRIEDY, Model P23 as follows:

Specifications/Salient Characteristics

· Designed for reflecting and retracting the mucoperiosteum after incisions of the gingival tissue

· Large flat handle instrument with one sharp blade and one dull blade for reflecting tissue.

· 10.7mm/13.2mm

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Curette Surgical, #85 Lucas Manufacturer Brand Name: HU-FRIEDY, Model CL85 as follows:

Specifications/Salient Characteristics

· Designed for curettage, cyst removal and tooth socket debridement

· Lucas 85 R/L Curette, designed with a long 20mm shank, medium 2.5mm spoon shaped blades

· Designed with a large, knurled hexagon handle to ensure secure instrument control

· Surgical grade stainless steel for longevity and corrosion resistance

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Curette Surgical, #86 Lucas Manufacturer Brand Name: HU-FRIEDY, Model CL86 as follows:

Specifications/Salient Characteristics

· Designed for curettage, cyst removal and tooth socket debridement

· Lucas 86 R/L Curette, designed with a long 20mm shank, medium 2.8mm spoon shaped blades

· Designed with a large, knurled hexagon handle to ensure secure instrument control

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Curette Surgical, #2/4 Molt, DE Manufacturer Brand Name: HU-FRIEDY, Model CM2/4 as follows:

Specifications/Salient Characteristics

· The 2/4 Molt surgical curette is designed for curettage, cyst removal and tooth socket debridement

· 3.6mm and 7mm working ends

· Designed with a large, knurled hexagon handle to ensure secure instrument control

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

4 Kramer-Nevins Curette Periodontal Surgical, Satin Steel Handle Manufacturer Brand Name: HU-FRIEDY, Model SKN46 as follows:

Specifications/Salient Characteristics

· Larger and heavier for the removal of granulation tissue and tenacious subgingival deposits

· Ergonomically designed Satin Steel Handle

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

1X Miller-Colburn Bone File Miller, Crosscut Manufacturer Brand Name: HU-FRIEDY, Model BF1X as follows:

Specifications/Salient Characteristics

· The 1X Miller-Colburn cross-cut bone file is used for final smoothing and shaping of bone

· Small paddle shaped end is half the size of the larger paddle shaped end

· 8.1mm and 4.8mm wide working ends, both at a 25 degree angle

· Designed with a large, knurled hexagon handle to ensure secure instrument control

· Surgical grade stainless steel provides corrosion resistance and longevity

· Subject to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Rongeurs Blumenthal Standard 30⁰ Manufacturer Brand Name: HU-FRIEDY, Model RBL as follows:

Specifications/Salient Characteristics

· Used for trimming and recontouring alveolar bone and gross tissue removal

· 3.3mm-14.5cm

· Surgical stainless steel Surgical grade stainless steel provides corrosion resistance and longevity

· Subject to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Mini Friedman Rongeurs Manufacturer Brand Name: HU-FRIEDY, Model RMF as follows:

Specifications/Salient Characteristics

· Used for trimming and recontouring alveolar bone and gross tissue removal

· Small beaks for use in limited access areas and for trimming fibrous tissue and boney spicules

· 14.5 cm (5 ¾”)

· Stainless steel

· Subject to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

150 Upper Universal Apical Forceps Manufacturer Brand Name: HU-FRIEDY, Model FAF150 as follows:

Specifications/Salient Characteristics

· Used to extract teeth from alveolar bone

· Thin, anatomical tapered beaks and longitudinal serrations to penetrate the surrounding bone and firmly grasp the root and crown structure with multiple points of contact

· Reduces chance of crushing or fracturing crown

· Allows preservation of bone and reduces risk of root and buccal plate fractures

· Constructed from forged surgical grade stainless steel

· Finished with a scissors hinge to equally distribute forces along the instrument, and permit easier cleaning

· Lifetime warranty against defects in material and workmanship

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

151 Lower Universal Apical Forceps Manufacturer Brand Name: HU-FRIEDY, Model FAF151 as follows:

Specifications/Salient Characteristics

· Used to extract teeth from alveolar bone

· Thin, anatomical tapered beaks and longitudinal serrations to penetrate the surrounding bone and firmly grasp the root and crown structure with multiple points of contact

· Reduces chance of crushing or fracturing crown

· Allows preservation of bone and reduces risk of root and buccal plate fractures

· Constructed from forged surgical grade stainless steel

· Finished with a scissors hinge to equally distribute forces along the instrument, and permit easier cleaning

· Lifetime warranty against defects in material and workmanship

· Subject to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Specifications/Salient Characteristics

· Tissue forceps/pliers used to grasp and stabilize soft tissue during suturing

· 15.24 cm (6”)

· Tungsten carbide inserts bonded to surgical grade stainless steel

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Specifications/Salient Characteristics

· Microsurgical tissue pliers used to grasp and stabilize soft tissue during suturing

· 17.78 cm (7”)

· Tungsten carbide inserts bonded to surgical grade stainless steel

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

CW Aspirating Anesthetic Syringe

· Used to inject local anesthetic during dentistry

· Standard (large) thumb ring, regular plunger length with harpoon to apply negative pressure (aspiration) to ensure safe delivery of anesthetic into tissues and not vessels

· Handcrafted with Immunity Steel for optimal strength and corrosion resistance

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion

Retractor, Minnesota Manufacturer Brand Name: HU-FRIEDY, Model CRM as follows:

Specifications/Salient Characteristics

· Used to hold mucoperiosteal flaps, cheeks, lips and tongue away from the surgical area

· Handcrafted with Immunity Steel for optimal strength and corrosion resistance

· Subjected to corrosion testing as part of quality control measures

· Triple tempered for tensile strength and ductility and greater resistance to wear, fracture or corrosion Markel Mouth Prop, Child (Pair) Manufacturer Brand Name: HU-FRIEDY, Model MP52 as follows:

Specifications/Salient Characteristics

· Used to prop mouth open during extraction procedures and reduce TMJ trauma for sedated patients

· Small

· Latex free rubber

Markel Mouth Prop, Adult (Pair) Manufacturer Brand Name: HU-FRIEDY, Model MP54 as follows:

Specifications/Salient Characteristics

· Used to prop mouth open during extraction procedures and reduce TMJ trauma for sedated patients

· Large

· Latex free rubber

Curved Hemostat, Kelly Manufacturer Brand Name: HU-FRIEDY, Model H2 as follows:

Specifications/Salient Characteristics

· Multipurpose instrument…