36C24219Q0472-000.docx

FedBizOpps Special Notice

CLASSIFICATION CODE

SUBJECT

CONTRACTING OFFICE'S

ZIP-CODE

SOLICITATION NUMBER

ARCHIVE

DAYS AFTER THE RESPONSE DATE

RECOVERY ACT FUNDS

NAICS CODE

CONTRACTING OFFICE

ADDRESS

POINT OF CONTACT

(POC Information Automatically Filled from User Profile Unless Entered)

DESCRIPTION

See Attachment

AGENCY'S URL

URL DESCRIPTION

AGENCY CONTACT'S EMAIL

ADDRESS

EMAIL DESCRIPTION

GENERAL INFORMATION

ADDITIONAL INFORMATION

* = Required Field FedBizOpps Special Notice Rev. March 2010 Stratasys 450MC 3D printer and an Artec Eva 3D Scanner 13212 36C24219Q0472 N 333249 Department of Veterans Affairs Network Contracting Office 02 1304 Buckley Road Suite 101 Syracuse NY 13212 Jones, Kendall 315-425-4400 x 56553 kendall.jones@va.gov kendall.jones@va.gov kendall.jones@va.gov kendall.jones@va.gov

TITLE: 65- NOTICE OF INTENT TO AWARD SOLE SOURCE SOL: 36C24219Q0472

DUE: 03/26/2019 SET ASIDE: N/A NAICS: 333249

POP STATE: 3/10/2019-03/10/2019

AGENCY: Department of Veterans Affairs NY Harbor Healthcare, Manhattan VAMC; 323 East 23rd Street, New York NY 10010 Kendall N Jones Kendall.Jones@VA.GOV mailto:kendall.jones@va.gov DESCRIPTION: NOTICE OF INTENT TO AWARD A SOLE SOURCE CONTRACT TO Fisher Unitech, for a Requirements Order for Fortus 450MC 3D printer and the Artec Eva 3D Scanner System. Market research was conducted and determined that Fisher Unitech is the only vendor capable of providing supplies necessary that meet the requirements off Gait and Motion analysis Laboratory at the Manhattan VAMC.

Hardware / Firmware specifications

1. 3D printer Hardware: The system needs to be a Stratasys Fortus 450MC 3D printer. It will have following specifications:

· System Size: 51 x35.5 x78.1 inches

· System Weight: 1,325lbs

· Build Size: 16 x 14 x 16 inches

· Layer Thickness: 0.330mm

· Accuracy: Parts are produced within an accuracy of ± .127 mm (± .005 in.) or ± .0015 mm/mm (± .0015 in/in). Z part accuracy includes an additional tolerance of -0.000/+slice height

· Power Requirements: 208VAC 3 phase, 50/60 Hz, consumes 18 Amps

· Materials: Thermoplastics (ABS, ASA), Nylon 12, Nylon 12CF, ULTEM resins, Antero, PC

· Material Delivery: Two bays each for material and support cannisters

2. 3D Scanner Hardware: For integration with the 3D printer, the scanner needs to be an Artec Eva Scanner. It will have the following specifications:

· 3D resolution: up to 0.5mm

· 3D point accuracy: up to 0.1mm

· 3D accuracy over distance: up to 0.03% over 100cm

· Texture resolution: 1.3mp

· Colors: 24 bpp

· Scanning Technology: Structured Light

· Structured Light Source: Flash Bulb (no laser)

· Working Distance: 0.4 – 1m

· Linear Field of View (H x W @ closest range): 214 x 148mm

· Linear Field of View (H x W @ furthest range): 536 x 371mm

· Angular Field of View (H x W): 30 x 21 degrees

· Video Frame Rate: Up to 16 fps

· Exposure Time: 0.0002 sec

· Data Acquisition speed: up to 2 mln points/sec

· 3D mesh formats: OBJ, PLY, STL, AOP, ASCII, Disney PTEX, E57, XYZRGB

· Formats for measurements: CSV, DXF, XML

· 3D point cloud formats: BTX, PTX

· Weight: 0.9 kg

· Dimensions (H x D x W): 262 x 158 x 63mm

· Power consumption: 12V, 48W

· Interface: 1 x USB 2.0, USB 3.0 compatible

· Processing Capacity: 40 mln triangles/1GB RAM

Software Specifications 1: 3D Printer Software: The 3D Printer system must include Insight and Control Center job processing and management software and be compatible with GrabCad Print for use with job reports, scheduling, and remote monitoring.

GrabCAD Print: GrabCAD Print simplifies the traditional 3D print preparation workflow and provides intelligence around printer usage, so your team can get quality prints, faster. Print directly from CAD, organize print queues, monitor material levels and work with detailed views of your model. The tray and slice preview feature support adjustments before going to print.

Insight: Insight Software lets you print directly from CAD formats, eliminating the STL conversion. It can optimize productions with advanced control options that automatically adjust support structures and material extrusion paths, while providing the ability to pause production in order to change materials or embed hardware or circuitry. Control Center lets you seamlessly share project information between users, creating a more streamlined, efficient workflow.

2: 3D Scanner Software: The 3D scanner must include Artec Studio Pro and Geomagic for SolidWorks Bundle.

This Notice of Intent is not a request for Proposals or Quotations. No solicitation document exists and no telephone or email inquiries will be accepted. No contract award will be made on the basis of proposals, or quotations received in response to this notice. Interested persons may identify their interest and capability to respond to the requirement, and should furnish detailed data concerning their capabilities to provide services sought including pricing data and technical data sufficient enough to determine that a comparable source to the government is available. The government may consider all Expressions of Interest received prior to March 26, 2019. A determination by the government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the government. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. Responses to this notice must be emailed to kendall.jones@va.gov and received by 1300 hours EST on March 26, 2019. Submitters are responsible for ensuring their EOI reaches the designated contracting officer on-time.