3407671_ATTACH_EDA.PDF

PDF 2 MB Posted Jan 31, 2022

Attached to: ICBM CABLE ASSEMBLY Federal contract opportunity
Solicitation number: SPRHA222Q0345
Issued by: Defense Logistics Agency Aviation

View the file

Other files for this federal contract opportunity

Other files attached to ICBM CABLE ASSEMBLY, newest first.
File	Type	Posted
SPRHA222Q0345.pdf	PDF	Jan 31, 2022

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page of Pages Adobe Professional 8.0

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP TM OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ 9. DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE 11. AS OF DATE 13. DATE OF SUBSEQUENT

SUBMISSION Draft

Final

Reg Repro

16. REMARKS

15. TOTAL 0 1 0

G. PREPARED BY

Alden Hyde

H. DATE I. APPROVED BY

Ray Dean Murrison

J. DATE

1156244445C

Text Box

Block D: NIIN:011498437; PN: 47C524852G1; Description: Cable Assembly, SP Elec W4035SS A Block 4: Contractor format acceptable.

A Paragraph 10.2 of DI-NDTI-80809B clarified as follows:

a. All dimensions and tolerances specified on the manufacturing data shall be listed in one column, with the actual corresponding reading obtained from the inspection of the part listed in another column.

b. Materials used in the manufacture of the "First Article" shall be identified and certified along with a copy of material purchase requirements as conforming to applicable data requirements.

c. Material processing, including finish requirements (plating, heat treatment, welding, anodizing, painting, etc.) utilized in the manufacture of "First Article" item shall be identified and certified as conforming to applicable requirements. A copy of the purchase order certifying the process accomplished at other than contractor facility shall be included.

A Block 9: Data submittal shall be marked with the following on the cover page:

A DISTRIBUTION STATEMENT D: Distribution authorized to DOD and U.S. DOD contractors only for Intercontinental Ballistic Missiles (ICBM) administrative or operational use determined as of 22 December 2021. Other requests for this document shall be referred to the ICBM Systems Directorate, Hill AFB, UT 84056-5816.

A WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2778 et seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C., App. 2401 et seq. Violations of these export control laws is subject to severe criminal penalties. Dissemination of this document is controlled under DOD Directive 5230.25.

A DESTRUCTION NOTICE: For classified documents, follow procedures in DOD 5220.22-M, National Industry Security Manual, Chapter 5, Section 7, Para 5-704, or DOD 5200.1-R, Information Security Program Regulation, Chapter 6, Para C6.7. For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Reset DD FORM 1423-1, FEB 2001 Page of Pages

16. REMARKS (Continued)

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page of Pages Adobe Professional 8.0

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

Form Approved OMB No. 0704-0188

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ 9. DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE 11. AS OF DATE 13. DATE OF SUBSEQUENT

SUBMISSION Draft

Final

Reg Repro

16. REMARKS

15. TOTAL 2 2 0

G. PREPARED BY

Alden Hyde

H. DATE I. APPROVED BY

Ray Dean Murrison

J. DATE

1156244445C

Text Box

Block D: NIIN: 011498437; PN: 47C524852G1; Description: Cable Assembly, SP Elec W4035SS A Block 9: Data submittal shall be marked with the following on the cover page:

Blocks 10, 11, 12 and 13: Contractor shall submit initial draft Counterfeit Prevention Plan within 60 days of contract award. Government approval/disapproval/comments will be provided to the contractor within 30 days after receipt, with contractor submittal of final counterfeit protection plan due 15 days after receipt of government comments.

Block 14: Document submission shall be made electronically using MS Office 2016 format. Those documents not compatible with MS Office 2016 shall be delivered in Adobe Acrobat.

Draft16 REMARKS:

a ADDRESSEE16 REMARKS_33:

1 DATA ITEM NO3: A001

2 TITLE OF DATA ITEM3: Test/Inspection Report

3 SUBTITLE3: First Article Test Report

4 AUTHORITY Data Acquisition Document No3: DI-NDTI-80809B/T

5 CONTRACT REFERENCE3:

6 REQUIRING OFFICE3: 414 SCMS/GUEAA

a ADDRESSEE16 REMARKS3: 809 MXSS/MXDEB a ADDRESSEE16 REMARKS_63:

a ADDRESSEE16 REMARKS_53:

G PREPARED BY3:

I APPROVED BY3:

of: 2

A CONTRACT LINE ITEM NO3:

B EXHIBIT3:

TDP3:

TM3:

OTHER3:

D SYSTEMITEM3: See Blk 16

E CONTRACTPR NO3: PR# FD20202200345

F CONTRACTOR3:

a ADDRESSEE16 REMARKS_13:

a ADDRESSEE16 REMARKS_12:

a ADDRESSEE16 REMARKS_11:

Reg16 REMARKS_7:

Draft16 REMARKS_7:

4-9 CONTRACT LINE ITEM NO:

4-9 EXHIBIT:

TDP4-9:

TM4-9:

OTHER4-9:

4-9 SYSTEMITEM: See Blk 16

4-9 CONTRACTPR NO: PR# FD20202200345

4-9 CONTRACTOR:

4-9 REMARKS Continued: Block 10: ONE/R, Report shall be submitted concurrently with the "First Article" item either in the shipping container or separately if the report will not fit within the container unfolded. When shipped in the "First Article" container, report shall be enclosed in a paper or plastic envelope.

Block 11, 12, and 13: Defined in Contract

Block 14: Complete mailing address is:

809 MXSS/MXDEB (DODAAC: FB2029)

Bldg 849, Attn: Non-Accountable Bay Mark For: First Article Do Not Post Hill AFB, UT 84056-5713

Page_2: 2 of_2: 2 a ADDRESSEE16 REMARKS_10:

a ADDRESSEE16 REMARKS_9:

a ADDRESSEE16 REMARKS_83:

a ADDRESSEE16 REMARKS_73:

a ADDRESSEE16 REMARKS_43:

a ADDRESSEE16 REMARKS_23FA: SEE BLOCK 16

7 DD 250 REQFA: SD

2021-12-22T09:41:52-0700

HYDE.ALDEN.SHANE.1558515453

2021-12-27T08:22:51-0700

MURRISON.RAY.D.JR.1513506828

17 PRICE GROUP: NSP

18 ESTIMATED TOTAL PRICE: $0.00

cpp ADDRESSEE16 REMARKS_3: Bldg 1227 a ADDRESSEE16 REMARKS_37:

a ADDRESSEE16 REMARKS_38:

A CONTRACT LINE ITEM NO:

B EXHIBIT:

TDP:

TM:

OTHER:

CPP SYSTEMITEM: See Blk 16

CPP CONTRACTPR NO: PR# FD20202200345

F CONTRACTOR:

CPP DATA ITEM NO: A002

CPP TITLE OF DATA ITEM: Counterfeit Prevention Plan

CPP SUBTITLE:

CPP AUTHORITY Data Acquisition Document No: DI-MISC-81832

5 CONTRACT REFERENCE:

CPP REQUIRING OFFICE: 414 SCMS/GUEAA

7 DD 250 REQ-CPP: DD

9 DIST STATEMENT REQUIRED: See Blk 16

10 FREQUENCY: See Blk 16

12 DATE OF FIRST SUBMISSION: See Blk 16

14 DISTRIBUTION:

8 APP CODE: A

11 AS OF DATE: See Blk 16

13 DATE OF SUBSEQUENT SUBMISSION: See Blk 16 cpp ADDRESSEE16 REMARKS_2: 6031 Gum Lane cpp ADDRESSEE16 REMARKS: 414 SCMS/GUEAA

Repro16 REMARKS_19:

Reg16 REMARKS_19:

Draft16 REMARKS_19:

a ADDRESSEE16 REMARKS_19:

Repro16 REMARKS_18:

Reg16 REMARKS_18:

Draft16 REMARKS_18:

a ADDRESSEE16 REMARKS_18:

Repro16 REMARKS_17:

Reg16 REMARKS_17:

Draft16 REMARKS_17:

a ADDRESSEE16 REMARKS_17:

Repro16 REMARKS_16:

Reg16 REMARKS_16:

Draft16 REMARKS_16:

a ADDRESSEE16 REMARKS_16:

Repro16 REMARKS_15:

Reg16 REMARKS_15:

Draft16 REMARKS_15:

a ADDRESSEE16 REMARKS_15:

Repro16 REMARKS_14:

Reg16 REMARKS_14:

Draft16 REMARKS_14:

a ADDRESSEE16 REMARKS_14:

Repro16 REMARKS_13:

Reg16 REMARKS_13:

Draft16 REMARKS_13:

cpp ADDRESSEE16 REMARKS_13:

Repro16 REMARKS_12:

Reg16 REMARKS_12:

Draft16 REMARKS_12:

cpp ADDRESSEE16 REMARKS_12:

Repro16 REMARKS_11:

Reg16 REMARKS_11:

Draft16 REMARKS_11:

cpp ADDRESSEE16 REMARKS_11: Attn: Carolina Lee

Repro16 REMARKS_10:

Reg16 REMARKS_10:

Draft16 REMARKS_10:

cpp ADDRESSEE16 REMARKS_10: Hill AFB, UT 84056

Repro16 REMARKS_9:

Reg16 REMARKS_9:

Draft16 REMARKS_9:

cpp ADDRESSEE16 REMARKS_9: Bldg 1227

Repro16 REMARKS_8:

Reg16 REMARKS_8:

Draft16 REMARKS_8:

cpp ADDRESSEE16 REMARKS_8: 6031 Gum Lane

Repro16 REMARKS_7:

Reg16 REMARKS cpp: 1

Draft16 REMARKS-cpp: 1 cpp ADDRESSEE16 REMARKS_7: 414 SCMS/GUMAC

Repro16 REMARKS_6:

Reg16 REMARKS_6:

Draft16 REMARKS_6:

cpp ADDRESSEE16 REMARKS_6:

Repro16 REMARKS_5:

Reg16 REMARKS_5:

Draft16 REMARKS_5:

cpp ADDRESSEE16 REMARKS_5: Attn: Alden Hyde

Repro16 REMARKS_4:

Reg16 REMARKS_4:

Draft16 REMARKS_4:

cpp ADDRESSEE16 REMARKS_4: Hill AFB, UT 84056

Repro16 REMARKS_3:

Reg16 REMARKS_3:

Draft16 REMARKS_3:

Repro16 REMARKS_2:

Reg16 REMARKS_2:

Draft16 REMARKS_2:

Reg16 REMARKS: 1

Repro16 REMARKS:

a ADDRESSEE16 REMARKS_20:

Draft16 REMARKS_20:

Reg16 REMARKS_20:

Repro16 REMARKS_20:

a ADDRESSEE16 REMARKS_21:

Draft16 REMARKS_21:

Reg16 REMARKS_21:

Repro16 REMARKS_21:

a ADDRESSEE16 REMARKS_22:

Draft16 REMARKS_22:

Reg16 REMARKS_22:

Repro16 REMARKS_22:

a ADDRESSEE16 REMARKS_23:

Draft16 REMARKS_23:

Reg16 REMARKS_23:

Repro16 REMARKS_23:

a ADDRESSEE16 REMARKS_24:

Draft16 REMARKS_24:

Reg16 REMARKS_24:

Repro16 REMARKS_24:

a ADDRESSEE16 REMARKS_25:

Draft16 REMARKS_25:

Reg16 REMARKS_25:

Repro16 REMARKS_25:

a ADDRESSEE16 REMARKS_26:

Draft16 REMARKS_26:

Reg16 REMARKS_26:

Repro16 REMARKS_26:

a ADDRESSEE16 REMARKS_27:

Draft16 REMARKS_27:

Reg16 REMARKS_27:

Repro16 REMARKS_27:

a ADDRESSEE16 REMARKS_28:

Draft16 REMARKS_28:

Reg16 REMARKS_28:

Repro16 REMARKS_28:

a ADDRESSEE16 REMARKS_29:

Draft16 REMARKS_29:

Reg16 REMARKS_29:

Repro16 REMARKS_29:

a ADDRESSEE16 REMARKS_30:

Draft16 REMARKS_30:

Reg16 REMARKS_30:

Repro16 REMARKS_30:

a ADDRESSEE16 REMARKS_31:

Draft16 REMARKS_31:

Reg16 REMARKS_31:

Repro16 REMARKS_31:

a ADDRESSEE16 REMARKS_32:

Draft16 REMARKS_32:

Reg16 REMARKS_32:

Repro16 REMARKS_32:

Draft16 REMARKS_33:

Reg16 REMARKS_33:

Repro16 REMARKS_33:

a ADDRESSEE16 REMARKS_34:

Draft16 REMARKS_34:

Reg16 REMARKS_34:

Repro16 REMARKS_34:

a ADDRESSEE16 REMARKS_35:

Draft16 REMARKS_35:

Reg16 REMARKS_35:

Repro16 REMARKS_35:

a ADDRESSEE16 REMARKS_36:

Draft16 REMARKS_36:

Reg16 REMARKS_36:

Draft16 REMARKS_37:

Reg16 REMARKS_37:

Draft16 REMARKS_38:

Repro16 REMARKS_36:

Repro16 REMARKS_37:

Reg16 REMARKS_38:

Repro16 REMARKS_38:

cpp PREPARED BY:

H DATE: 22DEC21

cpp APPROVED BY:

J DATE: 27DEC21

Page: 1 ofcpp: 1

2021-12-22T09:42:57-0700

HYDE.ALDEN.SHANE.1558515453

2021-12-27T08:21:26-0700

MURRISON.RAY.D.JR.1513506828

ENGINEERING DATA LIST

DATE:

27 DEC 2021

REVISION: 4 *HISTORY*

CAGE:

23991

PAGE:

NSN:

1190011498437NB

DATA TECH:

Schrader, Terry L

END ITEM:

MK12

ORGANIZATION/OFFICE SYMBOL:

429 SCMS GUMACA/

MANUFACTURER NAME:

LOCKHEED MARTIN CORPORATION

REFERENCE NUMBER:

47C524852G1

NOUN:

CABLEASSEMBLY,SPECI

LINE/

SUB CAGE

ENG DRAWING NUM/ ACCOMP

DOC NUM REV

SHEETS

FURN

CODE

DIST

CODE NOUN REMARKS

L 15226 47C524852G1 C S D CABLE ASSY, SP ELEC,

W4035SS

Schrader, Terry L 27 DEC 2021

WITH EO 09A0982-H

NAME: DATE:

L 15226 47C524852 C S D CABLE ASSEMBLY, SP ELEC

W4035SS

L 15226 47A518500 E S D ITEMS MISC Schrader, Terry L 27 DEC 2021

WITH EO 18A0009-H

L 15226 R15551 C S D CONNECTOR, PLUG,

ELECTRICAL

L 15226 R15777 K S D CONNECTOR, PLUG,

ELECTRICAL, MICRO-

MINIATURE, ENCI

L 15226 R16322 D S D COVER PROTECTIVE RUBBER

FOR PLUG ELECTRI

L 15226 R3980 K S D WIRE, ELECTRICAL,

INSULATED, RADIATION

RESISTANT,

L 15226 R2551 F S D INSULATION SLEEVING -

POLYVINYLIDENE FLOURIDE

(KYN

L 15226 47D179232 C S D TERMINATION, EMR

HARDWARE

L 15226 47D179233 A S D TERMINATION,RFI

HARDWARE

L 15226 47A518501 E S D NOTES CABLE FABRICATION

HEAT SHRINK SLEEVING TYPE

L 15226 47B518502 B S D ALTERNATE WIRING METHOD

L 15226 165A4505 S D CABLE ASSEMBLY, SP,

ELECTRICAL, W5S

L 15226 165A4506 A S D 165A4506

L 15226 S30042 V S D ENGINEERING AND QUALITY

STANDARD FOR ELECTRONIC

WITH EO 18A0534-H

L 15226 S30042-4 AB S D HARNESS ASSEMBLIES,

REQUIREMENTS FOR

C - CLASSIFIED DOCUMENT.

S - FURNISHED WITH SOLICITATION.

M - STABLE BASE DRAWING REQUIRED; FURNISHED WITH

CONTRACT AWARD.

X - DATA SUPPLIED (NOT IN JEDMICS).

R - FURNISHED BY PCO UPON REQUEST.

P - PARTIAL DOCUMENT FURNISHED.

V - VENDOR DRAWING; (NOT PROVIDED).

G - GOV'T DOCUMENT.

O - OTHERS, CONTRACTOR MUST ACQUIRE.

A- DATA NOT AVAILABLE.

FURNISHED METHOD CODE LEGEND:

Page 1 of 3EDL Version 4Generated by PRPS using Jasper Reports on 06 Jan 2022

L 15226 S30042/19 D S D MK 12A AGE CABLE & CABLE

ASSEMBLIES

WITH EO ICBM10C220

L 15226 S34060 A S D DRAWING TERMS AND SHOP

RUN TOLERANCES -

INTERPRETA

WITH EO 18A0635-H & 21C3054-H

L 15226 R2113 D S D FERRULE, ELECTRICAL

CONDUCTOR REDUCER, CRIMP

BARRE

L 15226 R2290 M S D FERRULE, HEAT SHRINKABLE

L 15226 R2473 S D INSULATION SLEEVING -

NEOPRENE, HEAT

SHRINKABLE

L 15226 R2479 R S D INSULATION SLEEVING,

ELECTRICAL - POLYOLEFIN,

HEAT

L 15226 R3254 A S D INSULATION SLEEVING -

TEFLON * HEAT SHRINKABLE,

L 15226 R2544 L S D BOOTS, POLYOLEFIN, HEAT

SHRINKABLE

L 15226 R2552 D S D TRANSISTIONS, POLYOLEFIN

(HEAT SHRINKABLE)

L 15226 R2145 F S D CAP, ELECTRICAL - WIRE END,

POLYOLEFIN, HEAT SHRIN

L 15226 R2495 E S D ADHESIVE - MODIFIED EPOXY

RESIN

L 15226 47B117838 S D ASSEMBLY, METHOD OF

L 73030 AN960 Y S D WASHER, FLAT

L 15226 R2494 B S D INSULATION TAPE,

ELECTRICAL, SYNTHETIC

RESIN

L 15226 R6535 C S D COMPOUND, POLYURETHANE,

ELECTRONIC PACKAGING

L 15226 R6540 D S D POLURETHANE COMPOUND,

POTTING AND

ENCAPSULATION, P

Page 2 of 3EDL Version 4Generated by PRPS using Jasper Reports on 06 Jan 2022

L 15226 47A101726 J S D PRIMERS FOR POLYURETHANE

POTTING COMPOUNDS

L 23991 R2625 E S D CONNECTOR, PLUG,

ELECTRICAL-BAYONET

COUPLING, CRIM

L 15226 R2220 F S D TERMINAL, LUG - CRIMP,

COPPER, INSULATED

L 15226 R2311 K S D WIRE, ELECTRICAL - SOLID,

COPPER LEAD ALLOY COATED

L 15226 R16323 B S D TAPE, VINYL, INDUSTRIAL,

ADHESIVE BACKED

L 15226 156A9727 N S D EPOXY RESINS, SHOCK

RESISTANT

L 15226 156A9742 R S D EPOXY RESINS, SHOCK

RESISTANT, APPLICATION OF

WITH EO 16C0377-H

L 15226 PSP535138 A S D PROCESS SPECIFICATION FOR

SEALING WITH A POLYSULFI

L 15226 R3444 D S D TAPE, VINYL, ADHESIVE

BACKED-CABLE MARKER

STANDARD ENGINEERING TEXT

RELEASE OF THIS DATA TO A FOREIGN-OWNED, CONTROLLED OR INFLUENCED COMPANY IS DEPENDENT UPON THE APPROVAL OF THE FOREIGN DISCLOSURE OFFICE.

Page 3 of 3EDL Version 4Generated by PRPS using Jasper Reports on 06 Jan 2022

Statement of Work March 2021

PRESERVATION, PACKAGING & MARKING REQUIREMENTS

The contractor shall develop, implement and maintain the preservation, packaging and packing of all items to be delivered under the terms of this contract. Packaging procedures will be established in accordance with AFMCI 24-201, specifically Paragraph 3.7 and MIL-STD-2073-1, Standard Practice for Military Packaging, Packaging requirements are identified in the AFMC Form 158, Packaging Requirements submitted by the responsible packaging specialist. All “markings and labeling” of shipments shall conform to MIL-STD-129, DoD Standard Practice, Military Marking for Shipment and Storage. The contractor shall affix a completed DD Form 1574, Serviceable Tag-Materiel or DD Form 1574-1, Serviceable Label- Materiel to each unit pack or intermediate container and prime outer container(s). The tag or label will indicate the condition(s) of the materiel and to identify the individual article or contents, bundle, container to which they are securely attached.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

(ISPM 15) REQUIREMENTS

The contractor shall use the wood packaging material regulation for international trade which describes Phytosanitary (including treatments) that have been approved for wood packaging material and provides for the approval of new or revised treatments. Use the latest revision of (ISPM 15), and the following statement complies with the United Nations-implemented restrictions on wood packaging material (WPM).

“This requirement is specifically concerned with invasive species such as pinewood nematode. WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frames, and cleats. The statement below cites the requirements in detail and covers lumber for building containers and pallets used for deliveries resulting in worldwide shipments (direct vendor deliveries, Air Logistics complex (ALC), Container Consolidation Points (CCP), Aerial Ports, Water Ports, or other DoD installations).

ELECTROSTATIC MATERIAL (When Applicable) The Contractor shall apply provisions of MIL-STD-2073-1, when identifying all solid-state devices and modules containing diodes, translators, integrated circuits and/or other microelectronic components sensitive to electrostatic forces. All such items shall be packaged IAW MIL-STD-2073-1 in conjunction with ANS/ESD S20.20, using electrostatic free barrier materials and shall clearly bear “Electrostatic Sensitive Device” labels IAW MIL-STD-129, Department of Defense Standard Practice Military Marking for Shipment and Storage.

PALLETIZED UNIT LOADS

The Contractor shall apply provisions and methods of MIL-STD-147, Palletized Unit Loads to contracts requiring the preparation and shipment of bonded palletized unit loads for DoD facilities when applicable.

SPECIALIZED SHIPPING CONTAINERS

The contractor shall apply provisions of MIL-STD-648, Department of Defense Design Criteria Standard, Specialized Shipping Containers. This standard establishes general design guidelines and associated tests for specialized shipping containers used by the Department of Defense. Definitive requirements for specific containers will be defined by the individual specification, acquisition, or task order. This standard is intended to be used as the basic reference document in all specifications and standards prescribing performance requirements to be applied to a specialized shipping container. Compliance with this intent is expected through normal application of the specification or standard preparation and revision processes.

Statement of Work (Cont)

HAZARDOUS MATERIALS (When Applicable) The contractor shall ensure Hazardous shipments comply with International Civil Aviation Organization (ICAO), U.S. Code of Federal Regulations (CFR) Title 49, International Air Transport Association (IATA) Dangerous Goods Regulation, International Maritime Dangerous Goods Code (IMDG, Annex 1), and AFMAN 24-604, Preparing Hazardous Materials for Military Air Shipments. Packaging shall meet “DOT specification or a United Nation (UN) specification ” manufactured in accordance with 49 CFR, Part 178 and the final packages assembled IAW 49 CFR, Parts 100-185 as applicable. A Competent Authority Approval (CAA) shall be acquired from the responsible Associate Administrator or other designated Department official to perform a function requiring prior consent under the Hazardous Material Regulation (HMR). Package(s) shall be marked IAW MIL-STD-129, DoD Standard Practice, Military Marking for Shipment and Storage.

The contractor shall affix a completed DD Form 1574, Serviceable Tag-Materiel or DD Form 1574-1, Serviceable Label- Materiel to each unit pack or intermediate container and prime outer container(s). The tag or label will indicate the condition(s) of the materiel and to identify the individual article or contents, bundle, container to which they are securely attached. If a symbol is used to represent the manufacturer or the approval agency certifying compliance with 49 CFR 178, subparts L and M, the symbol must be registered with the U.S. Department of Transportation. A copy of the Contractor’s Test Report and signed certification that the package configuration meets both CFR and UN requirements shall be made available to the procuring contract office, as required, prior to acceptance or shipment of any portion of the product IAW Contract Data Requirements List (CDRL DI-PACK-81059B) (Reference AFMC Form 158). Safety Data Sheets (SDS) are required for known hazardous items and applicable items shown in FED-STD-313, Tables I and II. The SDS shall have any applicable identification number, such as National Stock Number or Special Item Number. A copy of the SDS shall be mailed or e-mailed no later than five (5) days prior to contractual delivery of items:

FAR clause 52.223-3, Hazardous Material Identification and Material Safety Data

SPECIAL PACKAGING INSTRUCTIONS RETRIEVAL & EXCHANGE SYSTEM

(SPIRES)

Contractors may request the use of SPIRES website to view item packaging requirements or search for Special Packaging Instruction drawings via the following website: https://spires.wpafb.af.mil/

REUSABLE CONTAINERS

The contractor shall safeguard all received reusable shipping containers that meet the requirements of the AFMC Form 158 and are suitable for return shipment of serviceable assets. The contractor shall dispose of and replace unserviceable containers with new containers that meet requirements of the AFMC Form 158.

Contact the Product Support Manager and Administering Contracting Office (ACO) for disposition instructions and replacement when Long Life Reusable Container(s) are received in an unserviceable condition.

https://spires.wpafb.af.mil/

REPORTING DISCREPANCIES

The contractor shall use Web Supply Discrepancy Report (WebSDR) to submit/reply to a Supply Discrepancy Report (SDR), when improperly packed assets are received/shipped in other than the contracted packaging requirements (coded data or Special Packaging Instructions (SPI) drawings) from Department of Defense (DoD) components or contractor activities. The contractor shall request a WebSDR account via the following website: https://www.transactionservices.dla.mil/daashome/homepage.asp

(See Defense Logistics Management (DLM) 4000.25-M, Volume 2, Supply Standard and Procedures, Chapter 17, Supply Discrepancy Reporting) http://www.dla.mil/HQ/InformationOperations/DLMS/

Exceptions when no damage has occurred are as follows:

- Items packaged before the current SPIdate.

- An alternate pack may be used, provided the prime Air Force Sustainment Complex, Packaging Office at the Air Logistics Complex (ALC) approves and issues a waiver, deviation number, which would be annotated on the exterior container on the lower right hand portion of the identification side of thecontainer.

- In accordance with Technical Order (TO) 00-85B-3, How to Package Air Force Spares, the contractor may substitute the next larger size fast pack, of the type I or type II to ship transportation priorities 1 and 2 shipments as long as there is no decrease in any of the container dimensions without the requirement of a waiver deviation. TO 00- 85B-3, para 4.2 can be accessed via the website:

- https://www.tinker.af.mil/Portals/106/Documents/Technical%20Orders/AFD-082416-00-85B-3.pdf

ASSIST Documents for Specifications Listed in the GSA Index of Federal Specifications, Standards and Commercial Item Descriptions The contractor shall use the ASSIST website to access specification, standards, data item descriptions documents listed in this contract solicitation:

FAR 52-211-2 Availability of Specifications, Standards, and Data Item Descriptions listed in the Acquisition Streamlining and Standardization Information System https://quicksearch.dla.mil/

AFSC

406 SCMS/GULAA

Attn: Dustin Hale

DSN: 777-8841

COMM: 801-777-8841

Email: dustin.hale@us.af.mil https://www.transactionservices.dla.mil/daashome/homepage.asp http://www.dla.mil/HQ/InformationOperations/DLMS/ https://www.tinker.af.mil/Portals/106/Documents/Technical%20Orders/AFD-082416-00-85B-3.pdf https://quicksearch.dla.mil/%23/

APPLICABLE GOVERNMENT PACKAGING DOCUMENTS

NOTE: UTILIZE THE MOST RECENT REVISION

AFI 24-602V2_AFGM2018-01, Preparation and Movement of Air Force Cargo

AFMAN 24-604, Preparing Hazardous Materials for Military Air Shipments

DLMS 4000.25, Defense Logistics Management Systems, Volume 2, Change 10, Supply Standards and Procedures, Chapter 17, Supply Discrepancy Reporting

DOT Title 29, Occupational Safety and Health Administration, Labor

DOT Title 49, Code of Federal Regulations (49 CFR), Transportation

International Civil Aviation Organization (ICAO) Technical Instructions

International Air Transport Association (IATA) Dangerous Goods Regulation

International Maritime Dangerous Goods (IMDG) Code

ISPM 15, International Standard Phytosanitary Measure Note: Marking Requirements may be found in the American Lumber Standards Committee, Incorporated Wood Packaging Material Enforcement Regulations dated November 07, 2014 and ISPM 15.

MIL-STD-2073-1E, Change 4, Standard Practice, for Military Packaging

MIL-STD-129R, Change 1, Department of Defense Standard Practice Military Marking for Shipment and Storage

MIL-STD-648E, Department of Defense Design Criteria Standard, Specialized Shipping Containers

MIL-STD-147E, Change 1, Palletized Unit Loads

MIL-HDBK-773B, Electrostatic Discharge Protective Packaging

TO 00-85B-3, How to Package Air Force Spares

FED-STD-313E, Federal Standard: Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities

Statement of Work (Cont)

HAZARDOUS MATERIALS (When Applicable)

SPECIAL PACKAGING INSTRUCTIONS RETRIEVAL & EXCHANGE SYSTEM (SPIRES)

REUSABLE CONTAINERS

Statement of Work (Cont)

REPORTING DISCREPANCIES

Exceptions when no damage has occurred are as follows:

ASSIST Documents for Specifications Listed in the GSA Index of Federal Specifications, Standards and Commercial Item Descriptions

AFSC

Statement of Work (Cont)

File details come from the government source that posted it. Updated Jan 31, 2022.