3375288_ATTACH_EDA.PDF

ENGINEERING DATA LIST

DATE:

15 NOV 2021

REVISION: 1 *HISTORY*

CAGE:

12436

PAGE:

NSN:

5999016445499WF

DATA TECH:

Brumbaugh, Susan D

END ITEM:

F-16

ORGANIZATION/OFFICE SYMBOL:

429 SCMS GUMAC/

MANUFACTURER NAME:

BAE SYSTEMS INFORMATION AND

REFERENCE NUMBER:

2215061-006

NOUN:

COOLER,AIR,ELECTRON

LINE/

SUB CAGE

ENG DRAWING NUM/ ACCOMP

DOC NUM REV

NR

SHEETS

FURN

CODE

DIST

CODE NOUN REMARKS

L 98747 200733803 D S D LABEL, UNIQUE

IDENTIFICATION (UID)

Brumbaugh, Susan D 15 NOV 2021

W/EO 10A1486-H & 10A1433-H

NAME: DATE:

STANDARD ENGINEERING TEXT

Brumbaugh, Susan D 15 NOV 2021

RELEASE OF THIS DATA TO A FOREIGN OWNED, CONTROLLED OR INFLUENCED COMPANY IS DEPENDENT UPON THE APPROVAL OF THE FOREIGN DISCLOSURE OFFICE.

NAME: DATE:

C - CLASSIFIED DOCUMENT.

S - FURNISHED WITH SOLICITATION.

M - STABLE BASE DRAWING REQUIRED; FURNISHED WITH

CONTRACT AWARD.

X - DATA SUPPLIED (NOT IN JEDMICS).

R - FURNISHED BY PCO UPON REQUEST.

P - PARTIAL DOCUMENT FURNISHED.

V - VENDOR DRAWING; (NOT PROVIDED).

G - GOV'T DOCUMENT.

O - OTHERS, CONTRACTOR MUST ACQUIRE.

A- DATA NOT AVAILABLE.

FURNISHED METHOD CODE LEGEND:

Page 1 of 1EDL Version 1Generated by PRPS using Jasper Reports on 23 Nov 2021

DD FORM 1423-1, FEB 2001

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please DO NOT RETURN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No.

listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY: (Contractor Data Manager) H. DATE I. APPROVED BY: (Engineer) J. DATE

Page of Pages

16. REMARKS (Continued)

16. REMARKS (Continued)

A_CONTRACT_LINE_ITEM_NO:

B_EXHIBIT:

xTDP: Off xTM: Off

OTHER:

DSYSTEMITEM:

E_CONTRACTPR_NO:

FCONTRACTOR:

16_REMARKS_Continued: s. Original drawings are not required. If applicable, reproducible stable base copies of unidimensional drawings and master pattern drawings are required. See Block 14.

Page2: 2 of_pages:

Reset:

xtm: Off

1_DATA_ITEM_NO: A001

2_TITLE_OF_DATA_ITEM: Counterfeit Prevention Plan

3_SUBTITLE: CPP

4_AUTHORITY_Data_Acquisit: DI-MISC-81832

5_CONTRACT_REFERENCE: CLIN for Data

6_REQUIRING_OFFICE: 416 SCMS/GUEAA

7_DID_250_REQ: LT

8_APP_CODE: A

DIST_STATEMENT: D

10_FREQUENCY: ONE/R

11_AS_OF_DATE: SEE BLK 16

12_DATE_OF_FIRST_SUBMISSI: SEE BLK 16

13_DATE_OF_SUBSEQUENT_SUB: SEE BLK 16

addressee1: 416 SCMS/ draft1: 1 reg1: 1 repro1:

addressee2: GUEAA draft2:

reg2:

repro2:

addressee3: 6070 Gum LN draft3:

reg3:

repro3:

addressee4: Bldg. 1213 draft4:

reg4:

repro4:

addressee5: Hill AFB, UT draft5:

reg5:

repro5:

addressee6: 84056-5826 draft6:

reg6:

repro6:

addressee7:

draft7:

reg7:

repro7:

addressee8: SEE BLK 16 draft8:

reg8:

repro8:

addressee9:

draft9:

reg9:

repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12:

draft12:

reg12:

repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 1 total_repro: 0

16_REMARKS: NOTE: Changes to office symbols and/or e-mail addresses when necessary shall be made by letter through the Government CO/ACO without further revision to this CDRL.

1. Block 4: Contractor Format Acceptable.

2. Blocks 7, 8, 14: The contractor shall submit a Letter of Transmittal and send the Contractors Counterfeit Protection Plan (CPP) via e-mail to: adrian.gustai@us.af.mil

3. Blocks 8, 10, 11, 12, 13: The contractor shall deliver the Counterfeit prevention Plan (CPP) NLT thirty (30) calendar days after contract award. The Government comments will be provided to the contractor within fourteen (14) calendar days after receipt. The contractor shall resubmit the CPP NLT seven (7) calendar days after receipt of Government comments.

4. Block 9: Distribution Statement, Export Control Warning and Destruction Notice shall be IAW DoD Instruction 5230.24

The following Distribution Statement shall be placed on the first sheet of each document and/or associated lists.

DISTRIBUTION STATEMENT "D": Distribution authorized to the Department of Defense and U.S. DoD contractors only (Administration or Operational Use). (Nov 2021). Other requests for this document shall be referred to (416 SCMS/GUEAA, Hill AFB, UT 84056-5826).

EXPORT CONTROL WARNING: All printed and electronic, including digital, technical documents that determined to contain export-controlled technical data shall be marked with the following statement:

WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate IAW provisions of DoD Directive 5230.25.

17_PRICE_GROUP: NSP

ESTIMATED_TOTAL_PRICE: 0.00

G_PREPARED_BY:

H_DATE: 10 Nov 2021

1_APPROVED_BY:

J_DATE: 10 Nov 2021

Page: 1 reg38t: 1

A_CONTRACT_LINE_ITEM_NO:

B_EXHIBIT: A

xTDP: Off

OTHER: MISC

DSYSTEMITEM: COOLER,AIR,ELECTRON

E_CONTRACTPR_NO: FD2020-22-00202

FCONTRACTOR:

of_pages: 2

Reset:

xTM: Off

16_REMARKS_Continued: c. DESTRUCTION NOTICE: For classified documents, follow the procedures, in DoD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), Section 5-705, or DoD 5200.1-R, Information Security Program Chapter VI. For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Page2: 2

2021-11-10T13:58:12-0700

PINNEGAR.STEPHANIE.A.1102660737

2021-11-15T07:08:32-0700

GUSTAI.ADRIAN.1245187153

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 21 MAY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING DIVISION), HILL AFB, UTAH 84056.

DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

AutoCAD SHX Text

123 LBS

ITEM WT.

2169 MOD

MARCH 87

DD

FORM

LEVEL B:

LEVEL A:

CLOSURE

IAW: ASTM D6256 (UNNAILED)

IAW: ASTM D6256 (UNNAILED)

COMPUTER GENERATED

SPI NO. F01-505-6997

CODE ID

98747

DESIGN FRAGILITY G

SPEC STYLE TYPE CL VRTY GR TR

AS SPECIFIED BELOW AND BILL OF MATERIALS

ILL.

NATIONAL STOCK NO.

PART OR DRAWING NO.

CURRENT

SPECIAL MARKINGS:

A) SPI NO. F01-505-6997

PRESERVATIVE: N/A

UNSERVICEABLE METHOD: GX

CLEANING & DRYING: IAW MIL-STD-2073

MILITARY PRESERVATION IAW MIL-STD-2073

B) REUSABLE CONTAINER & DUNNAGE DO NOT DESTROY.

MARKING IAW MIL-STD-129

QUP

ICQ

CNTR O.D.

ITEM DIM

CNTR I.D.

GROSS WT LBS

ITEM NOMENCLATURE

PACKING

LEVEL

GROSS CU FT

B

A

ASTM D6256 (MOD)

ASTM D6256 (MOD)

REV

DATE

ORIGINAL

CHK.

AUTH.

P.S.

SPECIAL PACKAGING INSTRUCTION

19 3/8

39 1/4

39 1/4

27 3/4

31 5/8

31 5/8

18 1/4

LENGTH WIDTH DEPTH

37 1/4

37 1/4

26 3/4

26 3/4

LEVEL A LEVEL B

20.832

I

20.832

SPI NO. (TPO)

SHEET 1 OF 5

D. NAY K. RESTORFF S. PEELER N. CORONADO

5895-01-505-6997 WF

6014726-001

CONVERTER, SIGNAL DATA

F01-505-6997

B

C

05087

REVISIONS

DESCRIPTION

LTR

DATE

MARK THE SPI NUMBER ON THE IDENTIFICATION SIDE OF CONTAINER.

I

SERVICEABLE METHOD: GX

C) ESD LABELS

C

UPDATED DIMENSIONS, ADDED DISTRIBUTION STATEMENT AND DESTRUCTION NOTICE

18143

D) TO OPEN: REMOVE LAG BOLTS, LIFT BOX OFF BASE

E) LIFT BY BASE ONLY

F) DO NOT OPEN UNTIL READY FOR USE/INSPECTION

2169C MOD

SHEET 2 OF 5

SPECIFICATION

MATERIAL

SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .01, ANGLES ± 1°

P/N

DESCRIPTION

REQD

NOMENCLATURE

STRAPPING, STEEL WASHER, PLAIN BOLT, LAG CLEAT, FILLER CUSHION, TOP TAPE, PACKAGING WRAP BAG, BARRIER CUSHION, END CUSHION, SIDE CUSHION, TOP & BOTTOM CONTAINER, INTERIOR CUSHION, END CUSHION, SIDE CUSHION, BOTTOM NUT WASHER, PLAIN BOLT, CARRIAGE BASE SKID HEADER CLEAT, FILLER EDGE CLEAT, THRU EDGE

-10 -9 -8 -7 -6 -5 -4 -3 -2 -1

QTY

3/4 X .015 X AS REQUIRED 1/4 2 1/2 X 1/4 1 X 3 X AS REQUIRED 37 1/2 X 27 X 2 3 X AS REQUIRED 78 X 48 X 1/4 51 X 41 (ID) 20 1/2 X 19 1/4 X 2 32 3/4 X 19 1/4 X 1 32 3/4 X 22 1/2 X 1 32 3/4 X 22 1/2 X 21 1/4 (ID) 23 X 22 X 2 37 1/4 X 22 X 2 37 1/4 X 24 X 2 3/8 3/8 6 X 3/8 37 1/4 X 27 X 3/8 4 X 4 (NOM) X 29 2 X 2 (NOM) X 37 1/4 1 X 3 (NOM) X 21 3/4 1 X 3 (NOM) X 37

ASTM D3953 TYPE 1, RD, FINISH A ASME B18.21.1 ASME B18.2.1 ASTM D6199 CLASS 2 MIL-PRF-26514 TYPE 1, CLASS 2, GRADE B ASTM D5486 TYPE I OR V A-A-59135 CLASS 1, GRADE B MIL-DTL-117 TYPE I, CLASS F, STYLE 1 A-A-59136 CLASS 1, GRADE B A-A-59136 CLASS 1, GRADE B A-A-59136 CLASS 1, GRADE B ASTM 5118 RSC, CF, DOM, SW, GRADE 200 MIL-PRF-26514 TYPE I, CLASS 2, GRADE B MIL-PRF-26514 TYPE I, CLASS 2, GRADE B MIL-PRF-26514 TYPE I, CLASS 2, GRADE B ASME B18.2.2 ASME B18.21.1 ASME B18.5 A-A-55057 TYPE A ASTM D6199 CLASS 2 ASTM D6199 CLASS 2 ASTM D6199 CLASS 2 ASTM D6199 CLASS 2

2 14 14 A/R 1 A/R 1 1 2 2 2 1 2 2 1 4 4 4 1 2 2 2 2

-23 -22 -21 -20 -19 -18 -17 -16 -15 -14 -13 -12 -11

CAUTION NOTICES

NOTICE 1: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE

REPACKAGING IF THE INTEGRITY OF THE SPI IS MAINTAINED.

NOTICE 2: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.

NOTICE 3: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF MIL-STD-2073, PROVIDES EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE GOVERNMENT.

NOTICE 4: OVERSEAS AND FMS PACKAGING MUST MEET THE REQUIREMENTS OF LEVEL A PACKAGING.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

NOTES

1. FILL ALL VOIDS USING REF.-17, A-A-59135, CLASS 1, GRADE B TO ENSURE A SNUG FIT.

2. ADD FILLER CLEATS, REF.-20, TO SIDES AND TOP TO SUPPORT STEEL STRAPPING, REF.-23.

SHEET 3 OF 5

DETAIL A

SHEET 4 OF 5

-13

-14

-15

-18

-12

-17

-13

ITEM REFERENCE

INTERIOR CONTAINER

-16

SIDES REMOVED TO SHOW PLACEMENT OF CUSHIONS

FLIP LID OVER FOR ASSEMBLY

-1

-2

THRU EDGE CLEAT

FILLER EDGE CLEAT

UNNAILED CLOSURE

INNER CONTAINER

5 IN. TYP.

12 IN. MAXIMUM

-22

-21

-6

-7

-8

-23

-11

TYP.

-10

-9

-3

-5

-4

-20

-19

SHEET 5 OF 5

Sheets and Views

015056997-SHEET 01

015056997-SHEET 02

015056997-SHEET 03

015056997-SHEET 04

015056997-SHEET 05