31333750 THRU 3754-SALIENT CHARACTERISTICS.pdf

Salient Characteristics JML: 3133-3750 thru 3133-3754

JML: 3133-3750

DESCRIPTION:

Must be a Master Vernier Slide Caliper, Steel, 0-6" with the following features:

• Half as many bar graduations as conventional single-vernier tools

• Easy to read

• Machine divided graduations

• Tight, smoothly fitted slides

• No glare Starrett satin chrome finish

• Long 50-division vernier scales

• Open-face design

• Screw-type adjusting nut allows for fine measuring adjustments and lock nut holds measurements

• Fine tool steel construction

• Hardened, ground and lapped measuring surfaces

• Divider points on the back side to accurately set dividers and trammels

• Hardened and stabilized bars

JML: 3133-3751

Must be a Dial Depth Gage with Knife Edge, 0-.125" Range, 0-25-0 Dial, .0005" Graduations with the following features:

• Hardened, ground needle point contact

• Knife-edge base which can be precisely positioned for close work

• Point is 1/2" (17.7mm) long with a 40 degree included angle

• Case is included

• 0-.125" Range

• .0005" Graduation

• 0-25-0 Dial Reading

• Case is included

JML: 3133-3752

Must be a Telescoping Gage Set, 1/2 - 6"/13-150mm Range, 2-3/8 - 3-1/4"/60-82mm Handle Length with the following specifications:

• Range (in): 1/2 – 6"

• Range (mm): 13-150mm

• Handle Length (in): 2-3/8 – 3-1/4"

• Handle Length (mm): 60-82mm

JML: 3133-3753

Must be a Flex-O-Post Indicator Holder - Magnetic Base with Flex-O-Post Assembly with the following specification:

• For use with all Starrett Test, Back-Plunger, AGD, Dial and Miniature-Dial Indicators

• Also accommodates similar indicators of other manufacturers

• Base includes flex-o-post assembly

• Flexible post can be adjusted to any position and locked by turning a lever

• Useful in awkward places that are hard to reach with conventional holding devices

JML: 3133-3754

Must be a Dial Indicator, 0-.250" Range, 0-50-0 Balanced Dial, .001" Grads, .100" Range Per Rev, .375" Stem with the following specifications:

• Graduations (in): .001"

• Total Range (in): .250"

• Range One Rev. (in): .100"

• Dial Reading: 0-50-0

• Dial Color: White

• Stem Diameter (in): .375"