31249225 Gusher Pump Sole source signed_Redacted.pdf

JUSTIFICATION FOR SOLE SOURCE (SAP <$150k) Ref: FAR 13.106 and NAVSUP 4200.85D Chapter 5 Para. 2.b.(5)

The service or material listed on (Document number)__31249225 _ is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below. There are no substitutes available for this material.

Restricted to the following source or brand name. Provide original manufacturer's name.

(If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: _ Gusher Pumps ____________________ Manufacturer POC & Phone Nr. _ Joe Hill 503-205-2153 __________ Mfr. Address __ 22 Ruthman Dr, Dry Ridge, KY, 41035,USA Manufacturers Dealer/Rep _ Northwest Pump ____________________ Dealer/Rep Address/Phone Number_ Eric Liebe/2800 NW 31st AVE, Portland, OR, 97USA/5032052192 __________________________

_ X__Description of the item or service required, the estimated cost, and required delivery date.

Quote #3409633-00

2EA P/N: ZA230257, Gusher 2.5X3-10SEL-CDM-BNP 5/LS 7.937 COMPLETE PUMP WITH MOTOR

X _Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item, etc.).

Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.

Replacement parts must be manufactured to OEM specifications, within engineered tolerance, and manufactured out of OEM material selection to fit into existing machine components, function with existing OEM parts, withstand machine operating pressures, and not degrade/corrode due to improper material selection. These parts are for an industrial scrubber system, Replacements parts outside of OEM specifications could be detrimental to the environment.

__X_ The requested material or service represents the minimum requirements of the government

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

_ X__ The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Justify/Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.

Gusher 2.5X3-10SEL-CDM-BNP 5/LS 7.937 COMPLETE PUMP WITH MOTOR

This is a direct replacement for the current Pump/Motor system for scrubber model # WS-

108120-FRP-45.1-36-5-2-J-460-3-60.

All parts must function with original machine components, connect to existing OEM parts, interface with internal components,and withstand machine operating pressures, and not degrade/corrode due to improper material selection. These new parts must bring machine back to OEM specifications or better in order to continue to use this machine as a valued piece of production machinery.

____A patent, copyright, or proprietary data limits competition. The proprietary data is:

__X__ for existing brand name equipment.

____Other information to support a sole-source buy: