2931840_CDRL1_REPORT.pdf
PDF 104 KB Posted
- Attached to
- Manifold Assy Federal contract opportunity
- Solicitation number
- SPRTA1-20-R-0104
- Issued by
- Defense Logistics Agency Aviation
About this file
This Contract Data Requirements List (CDRL) outlines two data items required under Solicitation SPRTA1-20-R-0104 for a Manifold Assy from the Defense Logistics Agency Aviation. The contractor must submit a First Article Qualification Test Plan and Procedures within 30 calendar days of award to ensure all drawing requirements are met on the first article. Within 120 calendar days, the contractor must provide a Test/Inspection Report satisfying all requirements in the test plan, including dimensions, inspections, processes, materials, and certification of sources. The reports are to be delivered electronically in PDF format to AFLCMC/LZPED. Distribution is unlimited, with disposal by recycling or trash.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 2923444_TRNSPDATA_REPORT.pdf | ||
| SPRTA120R0104.pdf | ||
| 2916979_PKGRQMT_REPORT.pdf | ||
| 2916988_ATTACH.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST Form Approved OMB No. 0704-0188(1 Data Item)
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Executive Services Directorate (0704-0188).
Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY
TDP TM OTHER X
D. SYSTEM / ITEM
NSN: 2915-01-659-5074NZ P/N: 4089329
E. CONTRACT / PR NO.
FD20302000509
F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE OF DATA ITEM
First Article Qualification Test Plan and Procedures
3. SUBTITLE
NSN: 2915-01-659-5074NZ P/N: 4089329
4. AUTHORITY
DI-NDTI-81307A
(Data Acquisition Document No.) 5. CONTRACT REFERENCE
N/A
6. REQUIRING OFFICE
AFLCMC/LPSAA
7. DD 250 REQ
SD
8. APP CODE
N/A
9. DIST STATEMENT
REQUIRED
A
10. FREQUENCY
1 XTIME
11. AS OF DATE
See Block 16
12. DATE OF FIRST
SUBMISSION
See Block 16
13. DATE OF SUBSEQUENT
SUBMISSION
N/A
a. ADDRESSEE
Draft Final
ReproReg
b. COPIES
14. DISTRIBUTION
16. REMARKS
Wynn, Aaron FNAME: 19 MAR 2019DATE:
Block 9: DIST STATEMENT REQUIRED: Distribution Statement A: Approved for public release; distribution is unlimited. Controlling DoD office is 848 SCMG/421 GUEA.
Disposal and destruction notices: Dispose of by putting it in a recycle container or regular trash receptacle.
Block 14: Deliveries shall be submitted on ISO-10149 compliant CD-ROM in Adobe Acrobat Portable Document Format.
Contractor must provide a plan to ensure that all drawing requirements are met on each first article. The plan should include the equipment and facilities utilized to verify all drawing requirements. As a minimum, the following information is required.
a. A list of all drawing dimension, tolerances and the equipment utilized to verify each dimension. An actual drawing should be submitted to correlate with the dimension list.
b. A plan to verify that all non-destructive inspections are met.
c. A plan to verify that all visual inspection requirements are met.
d. A plan to verify material properties to include mechanical properties, metallurgical properties and chemical compositions.
e. A plan to verify that all significant manufacturing processes are performed by sources that are currently approved/certified by the OEM (P&W) or the CEA (AFLCMC/LPSAA).
f. A plan to verify that all forging or casting sources are currently approved/certified by the OEM (P&W) or the CEA (AFLCMC/LPSAA) if applicable. Guidelines for first article test plans are contained within LPF-QAR-003, attached. A government representative must coordinate on the first article test plan. The first article test plan shall be received 30 calendar days from the date of contract.
COORDINATORS:
Olsson, James D AFLCMC / LPEA2 405-622-7829 / 892-7829 22 NOV 2019
AFLCMC/LZPED
3001 Staff Dr, Ste 1AB 85A Tinker AFB, OK 73145-3041 Attn: FA Monitor
0 2 0
0 2 015. TOTAL
G. PREPARED BY
Wynn, Aaron F
421 SCMS / GUMA
405-582-6863
H. DATE
22 NOV 2019
I. APPROVED BY
//DIGITALLY SIGNED//
ZILAR.DALE.N.1221047407
424 SCMS / GUBAB 405-736-7976 / 336-7976
J. DATE
22 NOV 2019
Page 1 of 2DD FORM 1423-1, FEB 2001 Version 3Generated by PRPS using Jasper Reports on 04 Feb 2020
PREVIOUS EDITION MAY BE USED.
CONTRACT DATA REQUIREMENTS LIST Form Approved OMB No. 0704-0188(1 Data Item)
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY
TDP TM OTHER X
D. SYSTEM / ITEM
NSN: 2915-01-659-5074NZ P/N: 4089329
E. CONTRACT / PR NO.
FD20302000509
F. CONTRACTOR
1. DATA ITEM NO.
A002
2. TITLE OF DATA ITEM
Test/Inspection Report
3. SUBTITLE
NSN: 2915-01-659-5074NZ NOUN: MANIFOLD ASSY
NO 4
4. AUTHORITY
DI-NDTI-80809B/T
(Data Acquisition Document No.) 5. CONTRACT REFERENCE
N/A
6. REQUIRING OFFICE
AFLCMC/LPSAA
7. DD 250 REQ
SD
8. APP CODE
N/A
9. DIST STATEMENT
REQUIRED
A
10. FREQUENCY
1 XTIME
11. AS OF DATE
See Block 16
12. DATE OF FIRST
SUBMISSION
See Block 16
13. DATE OF SUBSEQUENT
SUBMISSION
N/A
a. ADDRESSEE
Draft Final
ReproReg
b. COPIES
14. DISTRIBUTION
16. REMARKS
Wynn, Aaron FNAME: 19 MAR 2019DATE:
Block 9: Distribution Statement A: Approved for public release; distribution is unlimited. Controlling DoD office is 848
SCMG/421 GUEA.
Disposal and destruction notices: Dispose of by putting it in a recycle container or regular trash receptacle.
Block 14: Deliveries shall be submitted on ISO-10149 compliant CD-ROM in Adobe Acrobat Portable Document Format.
Contractor format acceptable unless otherwise defined by applicable Data Item Description (DID).
The first article test report shall satisfy all requirements in the first article test plan. All drawing requirements must be satisfied including dimensions, visual inspections, non-destructive inspections (NDIs), manufacturing processes and material requirements. The test report shall indicate that any sources used to perform significant manufacturing processes are approved/certified by the OEM (P&W) or the CEA (AFLCMC/LPSAA).
A copy of the part process sheets shall be provided also. A government representative must coordinate on the test report.
Guidelines for the test reports are contained within LPF-QAR-003 Rev E, attached.
The first article test reports shall be received at OC-ALC/ENRS 120 calendar days from the date of government approval of test plan.
Contractor will include any QAR findings relative to the test report with the final test report submitted to
AFLCMC/LZPED.
COORDINATORS:
Olsson, James D AFLCMC / LPEA2 405-622-7829 / 892-7829 22 NOV 2019
AFLCMC/LZPED
3001 Staff Dr, Ste 1AB 85A Tinker AFB, OK 73145-3041 Attn: FA Monitor
0 2 0
0 2 015. TOTAL
G. PREPARED BY
Wynn, Aaron F
421 SCMS / GUMA
405-582-6863
H. DATE
22 NOV 2019
I. APPROVED BY
//DIGITALLY SIGNED//
ZILAR.DALE.N.1221047407
424 SCMS / GUBAB 405-736-7976 / 336-7976
J. DATE
22 NOV 2019
Page 2 of 2DD FORM 1423-1, FEB 2001 Version 3Generated by PRPS using Jasper Reports on 04 Feb 2020
PREVIOUS EDITION MAY BE USED.
File details come from the government source that posted it. Updated .