25Q3112 Exhibit D.pdf
PDF 87 KB Posted
- Attached to
- Socket Flat Countersunk Head Capscrews Angle, K-Monel Federal contract opportunity
- Solicitation number
- SPMYM325Q3112
About this file
This is a Contract Data Requirements List (CDRL) form specifying two data deliverables (A001 and A002) for a contract related to Socket Flat Countersunk Head Cap Screw Angle components. The first deliverable (A001) requires a Certificate of Compliance for quality certification, to be submitted one time with the material delivery. The second deliverable (A002) requires Chemical and Mechanical Certification data/reports containing actual test results, which must be quantitative and meet specification units. Both deliverables require one final copy to be submitted to office code 245.
The CDRL specifies detailed requirements for fastener certification, including evidence of testing the correct number of specimens and requirements for new untested fasteners where wedge tensile and yield strength testing are needed. Special marking and certification requirements apply for Controlled Industrial Material. The document is approved by Jason Laflamme (245.2) on 12/14/2024 and prepared by Conrad Gagne on 11/27/2024. The contract/PR number referenced is 43314001-3 25Q3112.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 25Q3112 Exhibit B.pdf | ||
| 25Q3112 Exhibit C.pdf | ||
| 25Q3112 RFQ CapScrews.docx | DOCX document | |
| 25Q3112 Exhibit E.pdf | ||
| 25Q3112 Clauses - Full Text.docx | DOCX document | |
| 25Q3112 Exhibit A.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2C-0339-25 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. C. CATEGORY
TDP X TM OTHER
D. SYSTEM/ITEM
B. EXHIBIT
D
E. CONTRACT/PR NO. F. CONTRACTOR
SOCKET FLAT COUNTERSUNK HEAD 43314001-3 25Q3112
CAP SCREW ANGLE
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
A001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD
One Time With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232·
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
A002
CHEMICAL & MECHANICAL CERTIFICATION
CERTIFICATION DATA/ REPORT
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-80678 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
SUBMISSION
133.2 0 1 0 N/A N/A N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
12/14/2024
CONRAD GAGNE Ext: 6797 11/27/2024 X 12/14/2024
245.2C Jason Laflam m e
Sign ed by: LAFLAM M E .JASO N .R .1255776556
DEB0076
Typewritten Text 0011, 0012
File details come from the government source that posted it. Updated .