24Q6011 Attachment 1.pdf
PDF 94 KB Posted
- Attached to
- PLASTIC ROD, ROUND, (DELRIN AF DE 588) Federal contract opportunity
- Solicitation number
- SPMYM324Q6011
About this file
This is a combined synopsis/solicitation from the Defense Logistics Agency Land and Maritime for plastic rod, round, manufactured in accordance with Delrin AF DE 588. The solicitation requests quotes for 10 feet of plastic rod and associated data requirements including test reports and certificates of compliance. Quotes are due by January 23, 2024 and will be evaluated using lowest price technically acceptable criteria. Pricing terms require payment net 30 days after acceptance. Quotes must include representations for small business categories and be registered in SAM. The point of contact is listed as Jannell Moriarty at jannell.moriarty@dla.mil.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| RFQ 24Q6011 RFQ.docx | DOCX document | |
| 24Q6011 Exhibit A.pdf | ||
| Clauses - Full Text Provisions and Clauses 231228.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT
PRINTED 10/06/2023 ATTACHMENT PAGE
9330 1L
C DESCRIPTION/SPECIFICATIONS
C.1 MANUFACTURE DELRIN AF DE 588 IN ACCORDANCE WITH NAVSEA DWG
803-4384678 REV C AND DRN 4384678 C2, GENERAL NOTES 7.C.(9) AND 7.D
WITH ALL ITS APPLICABLE NOTES EXCEPT AS AMPLIFIED OR MODIFIED HEREIN:
ITEM PROPERTY ASTM TEST METHOD (L/R) VALUE
(A) SPECIFIC GRAVITY D792 (NOTE 1) 1.50-1.57
(B) MELTING POINT D2133 0R D3418 172-184 DEG C (342-363 DEG F)
(C) TENSILE STRENGTH (MIN) D638 (NOTES 1 & 4) 6100 LB/SQ. IN
(D) TENSILE IMPACT (MIN) D1822 TYPE S (NOTES 1 & 4) 5 FT-LB/SQ. IN.
(E) COMPRESSIVE STRESS D695 2100 @ 1% DEF.
(MIN PSI) (NOTES 1 & 4) 11,000 @ 10% DEF.
(F) WATER ABSORPTION D570 .30% MAX 24 HOURS
(G) ROCKWELL HARDNESS (R) D785 (NOTE 1) 115 +/- 15
(H) TEFLON FIBER CONTENT (NOTE 2) 18-23%
(I) DIMENSIONAL CHANGE (NOTE 3) .7% MAX
NOTES:
1. MATERIAL CONDITIONING PRIOR TO TEST IS AT THE VENDOR'S OPTION.
2. TEFLON FIBER CONTENT- AS CERTIFIED BY DUPONT. WHITE TEFLON
INCLUSIONS SHALL NOT EXCEED THE FOLLOWING:
A. DIAMETER 1/32"
B. LENGTH 1/8"
ITEM NO.
STOCK NUMBER
9330-LL-L01-0020
SPECIAL CHARACTERISTICS
SIZE:5.00" DIAM + 0.250"/ - 0.00"
ITEM NAME PLASTIC ROD, ROUND, (DELRIN AF DE 588)
SECTION B
SMIC
9G
SPMYM324Q6011
1 1/3
9330 1L
C. DENSITY 6 INDICATIONS PER 100 SQ. IN.
3. THE TEST METHOD TO DETERMINE DIMENSIONAL STABILITY SHALL BE PERFORMED
AS FOLLOWS: THE TEST SPECIMENS (FINISHED PIECES) TESTED SHALL BE MEASURED
AT 23 +/- 3 DEG C (73 +/- 5 DEG F) AND PLACED IN A MINERAL OIL* BATH MAINTAINED AT 160 +/- 3 DEG C (320 +/- 5 DEG F). THE SPECIMENS SHALL REMAIN IN THE BATH FOR SIX
(6) HOURS AT TEMPERATURE AND ALLOWED TO SLOW COOL IN THE BATH AT A RATE
NOT TO EXCEED 23 +/- 3 DEG C (73 +/- 5 DEG F) PER HOUR. WHEN THE BATH REACHES
23 +/- 3 DEG C (73 +/- 5 DEG F), THE TEST SPECIMENS SHALL BE REMOVED AND MEASURED.
THE PERCENT CHANGE IN EACH DIMENSION, OUTSIDE DIAMETER, INSIDE DIAMETER,
AND THICKNESS, SHALL NOT BE GREATER THAN THE VALUE SPECIFIED. IN LIEU OF FINISHED PIECES FOR TEST SPECIMEN PREPARE A 1.5 IN. LONG SLICE (FULL DIAMETER) TO USE AS TEST SPECIMEN AND
TEST AS REQUIRED.
* MINERAL OIL MEETS THE SPECIFICATION AS LISTED BELOW:
READILY CARBONIZABLE SUBSTA
SPECIFIC GRAVITY @ 25DEG C (77DEG F) ..O.8600 TO 0.8900
REFRACTIVE INDEX @ 20 DEG C (68 DEG F).1.480 (TYPICAL)
4. VALUES ARE MINIMUM MEAN VALUES. INDIVIDUAL SPECIMEN VALUES MAY NOT VARY MORE THAN 25% BELOW THE SPECIFIED MINIMUM MEAN VALUE. SHOULD ONE SPECIMEN EXCEED THE 25% CRITERIA, RETEST IS REQUIRED. FAILURE TO MEET THE ABOVE CRITERIA A SECOND TIME IS CAUSE FOR REJECTION.
C.2 DATA REQUIREMENTS:
C.2.1 TEST REPORTS (MECHANICAL PROPERTY TEST), SEE EXHIBIT A, SEQUENCE A001
C.2.2 CERT. OF COMPLIANCE, SEE EXHIBIT A, SEQUENCE A002
C.2.3 SAFETY DATA SHEETS, SEE EXHIBIT A, SEQUENCE A003
C.2 C500 MERCURY CONTROL (SUPPLIES)
D PRESERVATION/PACKAGING/PACKING
D.1 D4 PREPARATION FOR DELIVERY (COMMERCIALLY PACKAGED ITEMS)
E INSPECTION ACCEPTANCE
1 2/3
9330 1L
E.1 E1 RESPONSIBILITY FOR INSPECTION
H SPECIAL PROVISIONS
K Section
L Section
M Section
1 3/3
File details come from the government source that posted it. Updated .