22R0039 Solicitation.docx

N0040622R0039

Section A - Solicitation/Contract Form

NOTICE TO OFFERORS

NOTICE TO INTERESTED PARTIES

1. This solicitation is for the procurement of description in support of customer. It is anticipated that this solicitation will result in an award/order of a Firm, Fixed-Price Service type contract.

2. The entire solicitation shall be filled out, signed, and returned as part of your quote. See block 8 on page 1 of the solicitation for the closing date and time.

3. The deadline for submission of questions regarding the solicitation’s terms, conditions, specifications, and/or the statement of work (SOW) / performance work statement (PWS) is 1 day prior to the solicitation’s closing date.

4. PWS references available upon request to contractors registered in the Joint Certification Program. Details on how to register can be found at https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/

5. Quotes will be evaluated in accordance with 52.212-2.

6. SINGLE AWARD FOR ALL ITEMS: Due to the interrelationship of supplies and/or services to be provided hereunder, the Government reserves the right to make a single award to the quoter whose quote is considered in the best interest of the government, price and other factors considered. Therefore, quoters who quote less than the entire effort specified herein may be determined to be unacceptable.

7. “EXCEPTIONS: All quoters MUST note all exceptions from the solicitation’s terms conditions, specifications, and/or the statement of work / performance work statement, if any. It will be assumed that any quote without mention of any exceptions will take no exception from all specifications, terms and conditions, clauses, or provisions within the solicitation.”

COVID INFORMATION

Information for Contractor Employees Seeking to Enter Japan

1. The following is provided for the information of contractors to the U.S. Navy whose employees need to enter Japan to perform contract requirements. The information is current as of April 4, 2020. While the information is believed to be accurate, policies and procedures are continuing to change on a regular basis.

2. In response to the COVID-19 outbreak, the Government of Japan has banned the entry of non-Japanese citizens into Japan who have visited a number of listed countries within the immediately preceding 14 days. The United States is one of the listed countries. See https://www.japan.travel/en/coronavirus/ for a list of the current restrictions. Notwithstanding the list, Japan is permitting individuals to enter Japan who are covered by the Status of Forces Agreement (SOFA) between the U.S. and Japan. The SOFA covers employees of contractors to the U.S. Navy who are U.S. nationals, are not ordinarily resident in Japan, whose presence in Japan is at the official invitation of the United States Government, and who are in Japan solely for official purposes in connection with the U.S. armed forces.

3. Japan is allowing contractor employees within the scope of the SOFA to enter Japan so long as two conditions are met: First, travelers are not permitted to use public transportation from the initial point of entry to Japan, including domestic air travel. Second, the incoming traveler adhere to the most updated Restriction of Movement guidance in response to COVID-19.

4. All contractor personnel arriving in Japan should utilize the process outlined in the attached USFJ Instruction to ensure they are recognized as members of the civilian component under Article 1.b. of the SOFA. The process requires that a contractor contact the contracting officer for the contract on which its employee will perform in Japan prior to the employee traveling to Japan. Contact is made through the Synchronized Pre-deployment and Operational Tracker (SPOT) system. The contractor will provide information to the contracting officer about the traveling employee. Following review, the contracting officer will issue the contractor a Letter of Authorization (LOA). The incoming contractor employee will hand carry a copy of the LOA and show it to the Japanese immigration authority at the port of entry as evidence of SOFA status. Contractors who do not have current access to SPOT should contact their contracting officer for information about accessing SPOT.

5. It is essential that contractors carefully manage each trip into Japan by a contractor employee to ensure that both of the conditions above are fully met. It is suggested that the best way for personnel to arrive in Japan for travel to Misawa, Iwakuni/Sasebo, or Okinawa is via the PATRIOT EXPRESS. This will allow for uninterrupted travel to their final destination. If going to Sasebo or to any base in Okinawa other than Kadena AB, travel from Iwakuni or Kadena AB will need to be by private conveyance or GOV. If a traveler headed outside the Kanto Plain arrives via commercial air, they will need to use government transportation to Yokota AB or NAF Atsugi and then do onward movement by milair - or do their 14 day ROM and then travel to their final destination by commercial transport. For personnel arriving on the Kanto Plain, they can travel via PATRIOT EXPRESS or by commercial air. However, travel from the airport to their place where they will satisfy the ROM requirement will need to be by private conveyance or GOV.

6. Some travelers have had difficulty with airlines allowing the travelers to get on flights or with Japan’s Ministry of Health allowing the SOFA persons to avoid quarantine in the immediate vicinity of the airport of initial arrival in Japan. Ensuring that each contractor employee has a copy of the SPOT LOA documenting their SOFA status should minimize these issues. Japan’s Ministry of Foreign Affairs issued a letter of 1 April 2020 describing the two conditions that must be met for those covered by the SOFA to be allowed access to Japan. A copy is attached. In addition to the LOA, it may be helpful for incoming contractor employees to bring a copy of the 1 April 2020 letter with them. The letter sets the conditions that apply for entrance but, by itself, doesn’t establish that the holder of the letter is covered by the SOFA. The separate LOA is necessary to confirm that the employee is covered by the SOFA. The letter of 1 April 2020 includes representation that US Forces Japan will provide transportation from an airport of port of entry to a US Forces japan facility. The letter should not be understood as changing the terms or conditions of any existing contract to require that the U.S. Navy or U.S. Government provide contractor employees transportation where that transportation is not otherwise addressed in the relevant contract.

7. This memo is intended to provide current information for contractors whose employees need to enter Japan to perform contract requirements. Nothing in the memo should be understood to change the terms or conditions of an existing contract. Any such changes must be made by an authorized contracting officer.

Attachments:

1. USFJI 64-100, Contract Performance in Japan (25 Oct 2019)

2. Letter of April 1, 2020, Ministry of Foreign Affairs of Japan

3. Restriction of Movement Guidance in Response to COVID -19 (UPDATE XIX)

4. Public Health Order v.49

5. Mask Guidance Update X

The following are the requirements for entry into Japan as of 2 November 2020 that Contractors shall comply with. See Section 3 for Pre-departure requirements and Section 4 for procedures upon arrival in Japan.

1. IN UPDATE TO REF F, THE PURPOSE OF THIS MESSAGE IS TO

PROVIDE UPDATED POINT OF CONTACT INFORMATION TO SYSCOMS, WARFARE

CENTERS AND CONTRACTING ACTIVITIES RESPONSIBLE FOR THE COORDINATION

OF SHIP REPAIR AND MODERNIZATION EFFORTS IN JAPAN.

2. GUIDANCE ISO DOD AND INTERNATIONAL RESTRICTIONS AS A RESULT OF

COVID-19 MITIGATION ACTIONS. SRF-JRMC IS UTILIZING THE FUNCTIONALITY

OF THE REGIONAL MAINTENANCE AND MODERNIZATION COORDINATION OFFICE

(RMMCO) IDENTIFIED IN REFS (A) AND (B) TO MANAGE THESE UNIQUE TRAVEL

REQUIREMENTS.

3. ANY PERSONNEL SUPPORTING SRF-JRMC MAINTENANCE AND MODERNIZATION

SHALL COMPLY WITH THE GUIDANCE PROVIDED OR RISK DENIAL OF ENTRY TO

JAPAN AND/OR COMMANDER FLEET ACTIVITIES YOKOSUKA (CFAY) OR

COMMANDER FLEET ACTIVITIES SASEBO (CFAS). DUE TO COVID-19

RESTRICTIONS, ENTRY REQUIREMENTS TO JAPAN IN SUPPORT OF MISSION

ESSENTIAL MAINTENANCE/MODERNIZATION IN WHICH SRF-JRMC SERVES AS

THE NAVAL SUPERVISORY AUTHORITY (NSA) ARE AS FOLLOWS (PRE-DEPARTURE):

A. PERSONNEL MUST HAVE A VALID PASSPORT FOR THE INTENDED PERIOD

OF STAY IN JAPAN.

B. APPROVAL MUST BE OBTAINED THROUGH TRAVEL TRACKER INDIVIDUAL

ANTI-TERRORIST PLAN (TT/IATP) VIA THE IATP.PACOM.MIL WEBSITE. THIS

REQUIRES LEVEL 1 ANTI-TERRORIST AND SURVIVAL, EVASION, RESISTANCE,

AND ESCAPE (SERE) TRAINING BE ACCOMPLISHED VIA

JKODIRECT.JTEN.MIL/ATLAS2/PAGE/LOGIN/LOGIN.JSF WEBSITE; AND A

PERSONNEL RECOVERY MISSION SOFTWARE (PRMS) SUBMISSION THROUGH

PRMSGLOBAL.PRMS.AF.MIL.

C. APPROVAL MUST BE OBTAINED THROUGH AIRCRAFT AND PERSONNEL

AUTOMATED CLEARANCE SYSTEM (APACS) FOR ENTRY TO INDOPACOM AOR. (FOR

SRF-JRMC SPONSORED WORK, SEA21 WILL PROVIDE O7 APPROVAL. ALL OTHER

SPONSORS WILL OBTAIN O7 LEVEL APPROVAL VIA THEIR COC).

HTTPS:APACS.MILCLOUD.MIL

D. PERSONNEL MUST CONTACT THE SRF-JRMC YOKOSUKA, SASEBO AND CVN

RMMCO OFFICES AT DIST-RMMCO-YOKOSUKA(AT)SRF.NAVY.MIL,

DIST-RMMCO-SASEBO(AT)SRF.NAVY.MIL, OR

DIST-CVN76-RMMCO(AT)SRF.NAVY.MIL RESPECTIVELY, FOR ARRIVAL

PREPARATIONS AND VERIFICATION OF REQUIREMENTS.

E. FOR THOSE WITHOUT A COMMAND ACCESS CARD (CAC), BASE ACCESS

REQUESTS MUST BE THROUGH THE YOKOSUKA SECURITY OFFICER

MR. SEAEN DANYIS AT SEAEN.DANYUS(AT)SRF.NAVY.MIL OR THE SASEBO

SECURITY OFFICER MR. ANTONIO QUIJANO AT

ANTONIO.QUIJANO(AT)SRF.NAVY.MIL CONSISTING OF:

1. VISIT REQUEST LETTER ON COMPANY LETTERHEAD

2. INSTALLATION ACCESS REQUEST FORM

3. LETTER OF AUTHORIZATION (LOA) OR ORDERS

4. SECNAV 5512-1

5. COLOR COPY OF TRAVELERS PASSPORT

6. USFJ FORM 27

F. A PRE-DEPARTURE HEALTH SCREENING OF ALL TRAVELERS WILL BE

ACCOMPLISHED ICW RMMCO PRIOR TO BEING PERMITTED TO COMMENCE

TRAVEL.

G. UPON RMMCO VERIFICATION THAT ALL TRAVEL REQUIREMENTS ARE

MET, SRF-JRMC WILL ISSUE A SERIALIZED GOVERNMENT OF JAPAN (GOJ)

APPROVAL LETTER TO ACCOMPANY ALL OTHER REQUIRED DOCUMENTS, TO

INCLUDE; LETTER OF AUTHORIZATION (LOA) OR ORDERS AS PROOF OF SOFA

STATUS AND VALID PASSPORT. THESE DOCUMENTS WILL BE PRESENTED TO

JAPANESE IMMIGRATION OFFICIALS UPON ARRIVAL AT PORT OF ENTRY.

CURRENT AUTHORIZED PORT OF ENTRIES INCLUDE COMMERCIAL AIRPORTS AT

TOKYO (NRT OR HND) AND MILAIR VIA YOKOTA AND OTHER LOCATIONS

APPROVED BY C7F OR CPF.

4. UPON COMMENCING TRAVEL, THE FOLLOWING POST-DEPARTURE

REQUIREMENTS ARE IN EFFECT:

. TRAVELERS WILL BE SUBJECT TO TEST FOR COVID-19 UPON ENTERING JAPAN

AND ARE HIGHLY RECOMMENDED TO BE TESTED FOR COVID VIRUS WITHIN

72 HOURS PRIOR TO TRAVELING. TRAVELERS WHO ARE FOUND POSITIVE FOR

COVID-19 MUST BE PREPARED FOR:

1. ISOLATION DEPENDENT ON VACCINATION STATUS.

2. ROOM CLEANING CHARGE UP TO $1000.

3. CASH OR ELECTRONIC FUNDS TRANSFER TO ALLOW FOR

PURCHASING OF FOOD AND INCIDENTALS.

C. TRAVELERS WILL ADHERE TO THE RESTRICTION ON MOVEMENT (ROM) GUIDANCE IN ACCORDANCE TO THEIR VACCINATION STATUS.

D. UPON COMPLETION OF THE APPLICABLE ROM PERIOD, THE RMMCO OFFICE

WILL COORDINATE THE BASE CHECK IN PROCESS. ENTRY ON TO

COMMANDER FLEET ACTIVITIES YOKOSUKA OR SASEBO WILL REQUIRE:

1. CAC (IF GOVERNMENT EMPLOYEE)

2. REGISTRATION IN DBIDS IS CRITICAL TO ENSURE BASE ACCESS

PRIORITY ISO MISSION ESSENTIAL TASKING IN CASE BASE HPCON LEVEL

CHANGES.

3. VISIT REQUEST VIA JPAS FOR SHIPBOARD ENTRY.

4. GOVERNMENT ORDERS (IF GOVERNMENT EMPLOYEE) OR LETTER

OF AUTHORIZATION (IF CONTRACTOR EMPLOYEE). THESE DOCUMENTS SHOULD

INDICATE MISSION ESSENTIAL NATURE OF WORK.

5. SATISFACTORY DAILY SELF HEALTH CHECK.

E. COMMENCE WORK THROUGH WORK COMPLETION PERIOD. IF APPLICABLE DAILY HEALTH

SCREENINGS WILL BE REQUIRED TO BE CONDUCTED BY EACH TRAVELER AND

REPORTED TO THEIR RESPECTIVE ONSITE LEAD OR SPONSOR, AND REPORTED TO

THE RMMCO OFFICE. ADDITIONAL SCREENINGS BY BASE OR SHIP PERSONNEL

ARE LIKELY AND MAY INCLUDE TEMPERATURE CHECKS. REGARDLESS OF VACCINATION STATUS, PERSONNEL SHALL CARRY A MASK ON THEIR POSSESSION AT ALL TIMES. FACE MASKS ARE TO BE WORN AS REQUIRED BY INSTALLATION AND COVID-19 COMMUNITY TRANSMISSION LEVELS OF THE AREA, AND AT ALL TIMES OFF INSTALLATIONS.

IF AT ANY TIME A TRAVELER

SHOWS INDICATIONS OF ILI, THEY SHOULD RETURN OR REMAIN AT THEIR

TEMPORARY LODGING AND REPORT STATUS TO THEIR RESPECTIVE ONSITE

LEAD OR SPONSOR, TO BE REPORTED TO THE RMMCO OFFICE.

F. UPON COMPLETION OF WORK, TRAVELERS SHALL REPORT AND CHECKOUT

WITH THE RMMCO OFFICE TO VERIFY ANY ADDITIONAL PERMISSIONS REQUIRED

FOR EXITING JAPAN.

5. ADDITIONAL REQUIREMENTS:

A. IAW REF A, ALTERATION INSTALL TEAM (AIT)S ARE REQUIRED TO

START RMMCO CHECK-IN PROCESS PRIOR TO ARRIVAL IN JAPAN. RMMCO

YOKOSUKA POCS ARE MR. STEVEN FARRIS AND MR. RICHARD PETERS,

DSN (315)243-0994, EMAIL: DIST-RMMCO-YOKOSUKA(AT)SRF.NAVY.MIL.

RMMCO SASEBO POCS ARE MR. THOMAS BUCK AND MR. LEONARDERIC MANALO,

DSN (315)252-6602/2805, EMAIL: DIST-RMMCO-SASEBO(AT)SRF.NAVY.MIL.

RMMCO CVN POCS ARE MR. RENATO DACUMOS,

RENATO.DACUMOS(AT)SRF.NAVY.MIL, DSN (315)243-2282, AND

MS. SARAH BROWN, SARAH.BROWN.CTR(AT)SRF.NAVY.MIL, DSN (315)243-2290,

OR DIST-CVN76-RMMCO(AT)SRF.NAVY.MIL.

B. IAW REF C, COUNTRY CLEARANCE REQUESTS ARE TO BE SUBMITTED A

MINIMUM OF 30 DAYS PRIOR TO TRAVEL.

C. ANY TRAVELER ENTERING CFAY OR CFAS IS SUBJECT TO DEBARMENT

FROM BASE AND REVOCATION OF VISIT CLEARANCE IF FOUND IN VIOLATION

OF ROM AND OR LIBERTY REQUIREMENTS.

Section B - Supplies or Services and Prices

HPAC

FFP

Top-end overhaul of Nr 1 and 2 HPACs in accordance with (IAW) the Performance Work Statement (PWS).

FOB: Destination

MILSTRIP: 38BEN55135A01

PSC CD: J043

NET AMT

LPAC

FFP

5,000-hour maintenance of Nr. 1-3 LPACs IAW the PWS.

FOB: Destination

MILSTRIP: 38BEN55135A01

PURCHASE REQUEST NUMBER: 38BEN55135A01

PSC CD: J043

NET AMT

Section C - Descriptions and Specifications

PERFORMANCE WORK STATEMENT

PERFORMANCE WORK STATEMENT

1. GENERAL SCOPE OF WORK:

This performance work statement (PWS) defines the scope of the contract; identifies technical reference documents applicable to performance of this contract; and describes the general tasks that the Government will require under this contract onboard and in support of a DDG in Ship Repair Facility, Japan Regional Maintenance Center (SRF-JRMC) Yokosuka, Japan.

SRF-JRMC is requesting an on-site Technical Representative to ACCOMPLISH OVERHAUL of TOP END NUMBER ONE AND NR. 2 HPAC Units and 5000HR MAINTENANCE FOR NUMBER ONE, NR. 2 and NR. 3 LPAC Units, in accordance with references of paragraph 2. Upon completion OEM will conduct operational and functional test.

2. REFERENCES:

The following references are applicable and the contractor must comply with the references listed:

2.1. TGI 38BEN55135-A01, F/O – OVERHAUL TOP END OF HIGH PRESSURE AIR COMPRESSOR NR. ONE IN 4-174-0-E KTR

2.2. TGI 38BEN55136-A01, F/O – OVERHAUL TOP END OF HIGH PRESSURE AIR COMPRESSOR NR. 2 IN 4-254-0-E KTR

2.3. TGI 38BEN55137-A01 F/O - ACCOMPLISH 5000HR MAINTENANCE FOR NO. ONE LPAC UNIT 4-174-0-E KTR

2.4. TGI 38BEN55137-A02, F/O - ACCOMPLISH 5000HR MAINTENANCE FOR NO.2 LPAC UNIT 4-254-0-E KTR

2.5. TGI 38BEN55137-A03, F/O - ACCOMPLISH 5000HR MAINTENANCE FOR NO.3 LPAC UNIT 4-254-0-E KTR

2.6. TGI_38BEN55135T01_c0v0 HPAC #1 (T & OP) – KTR

2.7. TGI_38BEN55136T01_c0v0 HPAC #2 (T & OP) – KTR

2.8. TGI_38BEN55137T01_c0v0 LPAC #1 (T & OP) – KTR

2.9. TGI_38BEN55137T02_c0v0 LPAC #2 (T & OP) – KTR

2.10. TGI_38BEN55137T03_c0v0 LPAC #3 (T & OP) – KTR

2.11. TP_55151-3-301KTR_T01 HPAC #1 (T & OP) – KTR

2.12. TP_55151-3-302KTR_T01 HPAC #2 (T & OP) – KTR

2.13. TP_55153-3-301KTR_T01 LPAC #1 (T & OP) – KTR

2.14. TP_55153-3-302KTR_T02 LPAC #2 (T & OP) – KTR

2.15. TP_55153-3-303KTR_T03 LPAC #3 (T & OP) – KTR

2.16. S9550-BZ-MMA-A10, Technical Manual for Air Compressor, Model 5R5-75A, 3000 PSIG, High Pressure with programmable logic.

2.17. S6220-EU-MMA-010, NAVSEA Technical Manual for Low Pressure Air Compressor Oil Free Model STAR-200C and 200D, using the RIX Industries Programmable Logic Chipset (PLC) designed micro-processor-based control system.

2.18. S6430-AE-TED-010, Piping Devices and Flexible Hose Assemblies

3. REQUIREMENTS:

3.1. Accomplish work as described in paragraph 2.

3.2. Contact the Government Surveillance officer (GSO) regarding any questions, recommendations, and concerns. Recommendations must be submitted in writing.

(V/G) “OPERATIONAL TEST”

3.5 Accomplish operational test in accordance with reference 2.6 through 2.15. Testing shall be accomplished in the presence of SRF-JRMC QA representative.

3.6 Provide a copy of the (V/G) test and inspection records to the SRF QA.

4. GOVERNMENT FURNISHED EQUIPMENT:

4.1. SRF JRMC will provide support service work IAW TGI’s listed in paragraph 2.

5. CONTRACTOR FURNISHED PROPERTY:

5.1. The Contractor shall provide all equipment and material necessary to accomplish requirements except those listed in Appendix M of TGI’s in paragraph 2.

6. PLACE OF PERFORMANCE:

The worksite is onboard a DDG at SRF-JRMC Yokosuka, Japan, pier side.

7. Points Of Contact (POCs)

To Be Given in Award

8. PERIOD OF PERFORMANCE:

See Section F

9. ESTIMATED WORK HOURS:

Normal work is scheduled for accomplishment between the hours of 8:00AM to 4:45PM, with a 45-minute lunch break, Monday through Friday. Unless the offeror states otherwise in his proposal, the Contractor shall observe the same holidays as the Government and shall be open for business at all other times. The contractor may be required to work additional hours outside of the normal work schedule, as requested/directed from the project management.

10. TRAVEL REQUIREMENTS:

All travel requirements shall be the responsibility of the contractor.

11. TRANSPORTATION OF THE EQUIPMENT/MATERIAL:

Shipping and handling of equipment and material to and from the contractor facility and SRF-JRMC Yokosuka, Japan, in support of the requirement shall be the responsibility of the contractor.

12. GENERAL INFORMATION:

12.1. Nothing contained in the performance work statement shall relieve the Contractor from complying with applicable Federal, state, and local Japanese laws, codes, ordinances, and regulations, including the obtaining of licenses and permits that may be required for the Contractor or Subcontractor(s) to perform a particular function, such as hazardous waste handling or disposal, or example.

12.2. Medical treatment. Government emergency vehicles and medical personnel shall only be used in emergency situations affecting contractor personnel whose life may be in danger or who are seriously injured. Government facilities may be used in these instances as the first point of treatment. Transfer to a non-Government medical treatment facility shall be made as soon as possible and as determined by attending medical authorities.

13. CONTRACTOR IN THE WORKPLACE:

13.1. Identification. All Contractor spaces/desks shall be clearly marked as contractor spaces only.

13.2. All e-mail addresses used by contractor personnel shall identify the company name.

13.3. All contractor correspondence shall be clearly marked with company name or letterhead.

13.4. Contractor personnel shall insure that when answering telephones that they identify themselves as contractor personnel.

13.5. Contractor personnel are not to handle/operate any lifting and handling equipment or other shop equipment, machines or tools without written consent from project superintendent prior to accomplishment of the task.

14. RESTRICTIONS:

14.1. Parking - Vehicles and equipment required by the Contractor to complete this contract must be registered with Security. Forms for obtaining vehicle passes and permits may be obtained from the Receiving Activity Point of Contact. Parking is available at or near the work site or at other authorized areas on the station. Contractor vehicles must be marked on the outside with the company name or logo or both. Failure not to comply may result in ticketing and/or loss of vehicle privileges.

14.2. Restricted Colors - Naval activities use the colors magenta and yellow to identify specially controlled materials. The contractor is specifically prohibited from using magenta and yellow colored plastic wrapping materials or bags, tape, or other covering materials.

14.3. Radio Restrictions - Operation of privately owned citizens band or amateur radio equipment (receive and transmit) within the geographic limits of the activity is prohibited. All radio equipment installed in privately owned motor vehicles must be turned off upon entering the premises.

14.4. Privately Owned Personal Computers and Cellular Telephones - The used of privately owned personal computers and cellular telephones by contractor personnel while on Naval Installations is restricted. Contractors requiring such devices in the performance of this contract shall obtain a copy of the applicable parts of Naval Instruction from the Contracting Officer.

14.5. Photography/Recording - Contractor personnel are prohibited from having photographic equipment, tape recorders, or other recording devices in their possession while inside the Operations Area (OA).

15. SAFETY AND ENVIRONMENTAL

15.1. Safety Requirements. The contractor shall establish, administer, and enforce safety rules that will meet the current requirements of the Occupational Safety and Health Administration (OSHA), and all applicable work item references. Work to be performed under this contract shall be accomplished using the guidelines identified Contractors and Subcontractors. When necessary, work shall be coordinated with the Safety Department to ensure all safety and health requirements are considered.

15.2. Safety Equipment. The contractor shall provide their employees with all necessary safety equipment during the performance of work on this contract. All contractor personnel shall have in their possession and shall properly wear OSHA approved personnel protective safety equipment (i.e. hard-hats, steel-toe safety shoes, safety glasses and hearing protection). If required, the Contractor shall provide all appropriate safety barricades, signs, and signal lights required to properly isolate the area of work.

15.3. Prior to commencing work, the Contractor representative(s) shall arrange with the Receiving Activity Point of Contact, to meet in conference with the customer, shop supervision, and other necessary personnel to discuss and develop mutual understandings relative to the administration of the Safety Program.

15.4. Environmental Requirements. Work performed under this contract shall be in compliance with all Japanese, Navy, Federal, State and local regulations, and all work items references, pertaining to the environment at all times. When necessary, work shall be coordinated with the Environmental Department to ensure that regulations are considered.

15.5. Responsibilities. The contractor bears sole responsibility for the safety of his her employees and compliance with environmental regulations. Naval safety personnel will monitor the safety of procedures, conduct inspections of the workplace, and perform safety related investigations, evaluations. The contractor shall conduct routine inspections of work and storage areas under his cognizance to maintain compliance with the cleanliness, material and waste management, air and water pollution controls, and provides general oversight on the environmental issues associated with this contract.

15.6. Situations that warrant corrective action will be brought to the attention of the contractor through the Contracting Officer Representative (COR). If violations could cause major damage or loss of life, Safety or Environmental personnel may contact contractor supervisory personnel on site and request corrective action or work stoppage. The COR will be notified immediately. The Commanding Officer has final authority for Station safety and environmental matters. He has delegated the Safety and Occupational Health Manager the authority to represent the Command in all safety matters and to resolve any disputes which may arise, and he has delegated the Environmental Manager the authority to represent the Command in all safety matters and to resolve any disputes, which may arise. Any interpretation of the various environmental regulations will be made by the Safety or Environmental Manager.

15.7. Accident Reporting. All accidents occurring on Station are reported to the Station Safety Department. If accidents occur after regular working hours the Command Duty Officer, shall be notified. Motor vehicle accidents occurring on Station are reported to both the Safety Department and Security Manager. In all cases, the accident scene must be preserved until the Government investigator has authorized movement of the materials and vehicles involved. Materials and equipment may be moved only as necessary to facilitate the removal of injured persons. The contractor shall forward a copy of all accident reports involving contractor employees to the COR. If Government property is involved, a copy of the accident report shall also be forwarded to the Government Property Administrator (GPA).

16. SECURITY

16.1. Admittance to The Work: Upon contract award, employees or representatives of the Contractor may require access to the Receiving Activities Operations Area (OA) or Industrial Area (IA) and shall be admitted to the work site only after they have been issued a Security Pass/ID Badge.

16.2. Notice: Persons who are currently on probation or parole from a felony conviction cannot qualify for security clearances, and will be denied access to the activity.

16.3. It shall be the Contractor's responsibility to collect and account for all identification passes issued to their personnel at the expiration of the contract or when access is no longer required.

16.4. Foreign Nationals or Affiliations - Foreign Nationals (non U.S. Citizens) or persons affiliated with, or employed by, a foreign owned company will not be granted access to a Naval Activity's OA/IA, without prior written approval from Commander, Naval Sea Systems Command.

17. PERFORMANCE REQUIREMENT STATEMENT SUMMARY

AQL = Acceptable Quality Level

CLAUSES INCORPORATED BY FULL TEXT

THE FOLLOWING NAVSUP LOCAL TEXT IS HEREBY MADE PART OF THE STATEMENT OF WORK/PERFORMANCE WORK STATEMENT.

NAVSUP FLCPS may utilize contractor support through the AbilityOne Program, as needed, to perform contract closeout functions for this acquisition. Information, including business sensitive/confidential or proprietary data, that the offeror provides to the Government or information already in the possession of the Government may be viewed and utilized by the AbilityOne Program support contractor personnel during the course of its contract performance. The information that may be made available to the support contractor may include, for example, pricing and technical proposals, historical contract, pricing and performance information, Commercial Asset Visibility (CAV) reporting information and similar data/information.

By submission of a proposal in response to this solicitation, the offeror and its subcontractors consent to a release of their business sensitive/confidential or proprietary data to the Government's AbilityOne Program support contractor personnel in order to perform close out services. Prior to the release of any such information to the support contractor, the support contractor will have in place with the Government a Non-Disclosure/Non-Use Agreement in accordance with the terms of the AbilityOne Program support contract.

Offerors may execute their own Non-Disclosure Agreement with the AbilityOne Program (AbilityOne contact information available from the contracting point of contact). The support contractor must provide copies of the executed agreements to the Contracting Officer and the Contracting Officer's Representative (COR) for the support contract; and the offeror/contractor for this acquisition must provide copies of the executed Agreement to the Contracting Officer for this acquisition. If the offeror/contractor seeks such a Non-Disclosure Agreement with the AbilityOne Program support contractor, the Agreement must be executed no later than the date of final delivery under the resulting NAVSUP FLCPS contract.

THE FOLLOWING NAVSUP LOCAL TEXT IS HEREBY MADE PART OF THE STATEMENT OF WORK/PERFORMANCE WORK STATEMENT.

Contractor Unclassified Access to Federally Controlled Facilities, Sensitive Information, Information Technology (IT) Systems or Protected Health Information

Executive Order 13467, Reforming Processes Related to Suitability for Government Employee, Fitness for Contractor Employees and Eligibility for Access to Classified National Security Information, Homeland Security Presidential Directive (HSPD)-12, requires government agencies to develop and implement Federal security standards for Federal employees and contractors. The 5 CFR 32 Part 157 in concert with DoD Manual 1000.13, Vol 1, implements the Federal Standards.

APPLICABILITY

This text applies to all DoD sponsored individuals who require CAC eligibility (or login and P/W if acceptable per contract) for: Physical access to DoD facilities or non-DoD facilities on behalf of DoD; Logical access to information systems (whether on site or remotely); or remote access to DoD networks that use only the CAC logon for user authentication, or access to sensitive and protected information. This applies to the Office of the Secretary of Defense (OSD), the Military Departments, the Office of the Chairman of the Joint Chiefs of Staff and the Joint Staff, the Combatant Commands, the Office of the Inspector General of the DoD, the Defense Agencies, the DoD Field Activities and all other organizational entities within the DoD (hereinafter referred to collectively as the "DoD Components").

Each contractor employee providing services at a Navy command under this contract is required to obtain a DoD CAC. Additionally, depending on the level of computer/network access, the contract employee will require a successful investigation as detailed below.

ACCESS TO FEDERAL FACILITIES

Per HSPD-12 and implementing guidance, all contractor employees working at a federally controlled base, facility or activity under this clause will require a DoD CAC. When access to a base, facility or activity is required contractor employees shall in-process with the Command's Security Manager (CSM) upon arrival to the command and shall out-process prior to their departure at the completion of the individual's performance under the contract.

START-UP PERIOD

All contractor resource onboarding documents must be submitted via the prime contractor. The prime contractor shall make all necessary preparations to assume full responsibility for productive performance as of the performance start date.

Definition of “productive”:

a. Visit Authorization Request (VAR)

b. Contractor Information Sheet (CIS)

c. FD-258 Fingerprint Card

d. Completed Electronic Investigation (EQIP)

e. All contractor resource(s) must have an active Joint Personnel Adjudication System (JPAS) profile

f. Common Access Card(CAC)

Note (1): Invoicing by the contractor will begin as of the commencement of the performance period of services and no reimbursement will be paid by the government for efforts expended during the start-up period.

Note (2): Foreign Nationals are not allowed access to the functional/system side of Enterprise Resource Planning (ERP).

ACCESS TO DOD INFORMATION TECHNOLOGY (IT) SYSTEM

In Accordance With (IAW) Secretary of the Navy (SECNAV) M-5510.30, contractor employees who require access to Department of the Navy (DoN) or DoD networks are categorized as IT-I, IT-II, or IT-III. The IT-II level, defined in detail in SECNAV M-5510.30, includes positions which require access to sensitive information. Sensitive information includes information protected under the Privacy Act, to include PHI. All contractor employees under this contract who require access to Privacy Act protected information are therefore categorized no lower than IT-II. IT Levels are determined by the requiring activity's Command Information System Security Manager (ISSM)/Information Assurance Manager (IAM).

Contractor employees requiring privileged or IT-I level access, (when specified by the terms of the contract) require a Single Scope Background Investigation (SSBI) or T5 or T5R equivalent investigation, which is a higher level investigation than the National Agency Check (NAC) with Law and Credit (NACLC)/T3/T3R described below. Due to the privileged system access, an investigation suitable for High Risk national security positions is required. Individuals who have access to system control, monitoring, or administration functions (e.g. system administrator, database administrator) require training and certification to Information Assurance (IA) Technical Level 1, and must be trained and certified on the Operating System (OS) or Computing Environment (CE) they are required to maintain.

Access to sensitive IT systems is contingent upon a favorably adjudicated background investigation. When access to IT systems is required for performance of the contractor employee's duties, such employees shall in-process with the Navy CSM and ISSM/IAM manager upon arrival to the Navy command and shall out-process prior to their departure at the completion of the individual's performance under the contract. Completion and approval of a System Authorization Access Request Navy (SAAR-N) form is required for all individuals accessing Navy IT resources. The decision to authorize access to a government IT system/network is inherently governmental. The contractor supervisor is not authorized to sign the SAAR-N; therefore, the government employee with knowledge of the system/network access required or the Contracting Officers Representative (COR) shall sign the SAAR-N as the supervisor.

The SAAR-N shall be forwarded to the CSM at least thirty (30) days prior to the individual's start date. Failure to provide the required documentation at least thirty (30) days prior to the individual's start date may result in delaying the individual's start date.

When required to maintain access to required IT systems or networks, the contractor shall ensure that all employees requiring access complete annual Cyber Awareness training, and maintain a current requisite background investigation. The contractor's security representative shall contact the CSM for guidance when reinvestigations are required.

INTERIM ACCESS

The CSM may authorize issuance of a DoD CAC and interim access to a DoN or DoD unclassified computer/network upon a favorable review of the investigative questionnaire and advance favorable fingerprint results. When the results of the investigation are received and a favorable determination is not made, the contractor employee working on the contract under interim access will be denied access to the computer network and this denial will not relieve the contractor of his/her responsibility to perform.

DENIAL OR TERMINATION OF ACCESS

The potential consequences of any requirement under this clause including denial or termination of physical or system access in no way relieves the contractor from the requirement to execute performance under the contract within the timeframes specified in the contract. Contractors shall plan ahead in processing their employees and subcontractor employees. The contractor shall insert this clause in all subcontracts when the subcontractor is permitted to have unclassified access to a federally controlled facility, federally-controlled information system/network and/or to government information, meaning information not authorized for public release.

CONTRACTOR'S SECURITY REPRESENTATIVE

The contractor shall designate an employee to serve as the contractor's security representative. Within three (3) work days after contract award, the contractor shall provide to the requiring activity's Security Manager and the Contracting Officer, in writing, the name, title, address and phone number for the contractor's security representative. The contractor's security representative shall be the primary point of contact on any security matter. The contractor's security representative shall not be replaced or removed without prior notice to the Contracting Officer and CSM.

BACKGROUND INVESTIGATION REQUIREMENTS AND SECURITY APPROVAL PROCESS FOR CONTRACTORS ASSIGNED TO NATIONAL SECURITY POSITIONS OR PERFORMING SENSITIVE DUTIES

Navy security policy requires that all positions be given a sensitivity value based on level of risk factors to ensure appropriate protective measures are applied. Contractor employees under this contract are recognized as Non-Critical Sensitive [ADP/IT-II] positions when the contract scope of work require physical access to a federally controlled base, facility or activity and/or requiring access to a DoD computer/network, to perform unclassified sensitive duties. This designation is also applied to contractor employees who access Privacy Act and PHI, provide support associated with fiduciary duties, or perform duties that have been identified as National Security Positions. At a minimum, each contractor employee must be a US citizen and have a favorably completed NACLC or T3 or T3R equivalent investigation to obtain a favorable determination for assignment to a non-critical sensitive or IT-II position. The investigation consists of a standard NAC and a FBI fingerprint check plus law enforcement checks and credit check. Each contractor employee filling a non-critical sensitive or IT-II position is required to complete:

SF-86 Questionnaire for National Security Positions (or equivalent Office of Personnel Management (OPM) investigative product)

Two FD-258 Applicant Fingerprint Cards (or an electronic fingerprint submission

Original Signed Release Statements

Failure to provide the required documentation at least thirty (30) days prior to the individual's start date shall result in delaying the individual's start date. Background investigations shall be reinitiated as required to ensure investigations remain current (not older than ten (10) years) throughout the contract performance period. The contractor's security representative shall contact the CSM for guidance when reinvestigations are required.

Regardless of their duties or IT access requirements ALL contractor employees shall in-process with the CSM upon arrival to the command and shall out-process prior to their departure at the completion of the individual's performance under the contract. Employees requiring IT access shall also check-in and check-out with the Navy command's ISSM/IAM. Completion and approval of a SAAR-N form is required for all individuals accessing Navy IT resources. The SAAR-N shall be forwarded to the Navy CSM at least thirty (30) days prior to the individual's start date. Failure to provide the required documentation at least thirty (30) days prior to the individual's start date shall result in delaying the individual's start date.

The contractor shall ensure that each contract employee requiring access to IT systems or networks complete annual Cyber Awareness training, and maintain a current requisite background investigation. Contractor employees shall accurately complete the required investigative forms prior to submission to the CSM. The CSM will review the submitted documentation for completeness prior to submitting it to the OPM; Potential suitability or security issues identified may render the contractor employee ineligible for the assignment. An unfavorable determination is final (subject to SF-86 appeal procedures) and such a determination does not relieve the contractor from meeting any contractual obligation under the contract. The CSM will forward the required forms to OPM for processing. Once the investigation is complete, the results will be forwarded by OPM to the DoD Central Adjudication Facility (CAF) for a determination.

If the contractor employee already possesses a current favorably adjudicated investigation, the contractor shall submit a VAR via the JPAS or a hard copy VAR directly from the contractor's security representative. Although the contractor will take JPAS owning role over the contractor employee, the Navy command will take JPAS "Servicing" role over the contractor employee during the hiring process and for the duration of assignment under that contract. The contractor shall include the IT position category per SECNAV M-5510.30 for each employee designated on a VAR. The VAR requires annual renewal for the duration of the employee's performance under the contract.

BACKGROUND INVESTIGATION REQUIREMENTS AND SECURITY APPROVAL PROCESS FOR CONTRACTORS ASSIGNED TO OR PERFORMING NON-SENSITIVE DUTIES

Contractor employee whose work is unclassified and non-sensitive (e.g., performing certain duties such as lawn maintenance, vendor services, etc...) and who require physical access to publicly accessible areas to perform those duties shall meet the following minimum requirements:

Must be either a U.S. citizen or a U.S. permanent resident with a minimum of 3 years of legal residency in the U.S. (as required by the Deputy Secretary of Defense DTM 08-006 or its subsequent DoD Instruction (INST)) and

Must have a favorably completed NACI or T1 investigation equivalent including a FBI fingerprint check prior to installation access.

To be considered for a favorable trustworthiness determination, the CSR must submit for all employees each of the following:

SF-85 Questionnaire for Non-Sensitive Positions

Two FD-258 Applicant Fingerprint Cards (or an electronic fingerprint submission)

Original Signed Release Statements

The contractor shall ensure each individual employee has a current favorably completed NACI or T1 equivalent investigation, or ensure successful FBI fingerprint results have been gained and investigation has been processed with OPM.

Failure to provide the required documentation at least thirty (30) days prior to the individual's start date may result in delaying the individual's start date.

* Consult with your CSM and ISSM/IAM for local policy when IT-III (non-sensitive) access is required for non-U.S. citizens outside the U.S..*

**Alternative language which may be included as appropriate:

Contractor and all Contractor personnel with access to or responsibility for XXXXXX of this contract shall comply with DoD Directive 8500.1E IA, DoDI 8510.01 Risk Management Framework (RMF) for DoD IT, DoD Directive 5400.11 DoD Privacy Program, DoD 5200.2-R Personnel Security Program and HSPD 12.

X.1 Be CAC ready at the IT Level II prior to reporting for work.

X.2 At minimum, all contractor personnel must possess/maintain a favorable Tier 3 investigation; formerly a NAC with Local Agency Check and Credit Check (NACLC). This requirement is critical in order to access the data base systems within NAVSUP. It is Contracting Companies; responsibility to ensure that 100% of the contractors have the Tier 3 investigation/IT Level II. In addition, interim approval of clearances is not authorized.

X.3 Be citizens of the U.S.

X.4 If at any time, any contractor person requiring a CAC is unable to possess/maintain an adjudicated Tier 3 investigation, the contractor shall immediately notify the NAVSUP COR to coordinate removal of such a person from work under this contract.

X.5 Contractor personnel with access to or responsibility for nonpublic government data under this contract must comply with HSPD-12 Personal Identity Verification (PIV) issuance requirements, known as the CAC for NAVSUP.

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

Section F - Deliveries or Performance

DELIVERY INFORMATION

12-DEC-2022

GOVT REPRESENTATIVE

N62758 SRF AND JRMC

GOVT REPRESENTATIVE

SEE PAGE 4 OF ORDER FOR SHIPMENT REQUEST PROC

BREMERTON WA 00000

FOB: Destination N62758

12-DEC-2022

FOB: Destination N62758

CLAUSES INCORPORATED BY REFERENCE

Section G - Contract Administration Data

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items—

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

COMBO

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table* To Be Given in Award (*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) (**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

To Be Given in Award

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Section I…