22Q8062 RFQ.pdf

SEE SCHEDULE

REQUEST FOR QUOTATIONS

(THIS IS NOT AN ORDER) 1

PAGE OF PAGES

1. REQUEST NO. 2. DATE ISSUED RATING

DO-A3SPMYM322Q8062 04-Aug-2022 5a. ISSUED BY

8. TO: NAME AND ADDRESS, INCLUDING ZIP CODE

SEE SCHEDULE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this

Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State, and local taxes)

ITEM NO.

(a)

SUPPLIES/ SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e) (f)

SEE SCHEDULE

AMOUNT

% No. %

NOTE: Additional provisions and representations [ ] are [ ] are not attached.

13. NAME AND ADDRESS OF QUOTER (Street, City, County, State, and ZIP Code)

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

15. DATE OF

QUOTATION

16. NAME AND TITLE OF SIGNER (Type or print) (Include area code)

TELEPHONE NO.

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 18 (REV. 6-95)

PREVIOUS EDITION NOT USABLE Prescribed by GSA FAR (48 CFR) 53.215-1(a)

THIS RFQ X[ ] IS [ ] IS NOT A SMALL BUSINESS SET-ASIDE

6. DELIVER BY (Date)

SEE SCHEDULE

AND/OR DMS REG. 1

UNDER BDSA REG. 2

4. CERT. FOR NAT. DEF.3. REQUISITION/PURCHASE

REQUEST NO.

DLA MARITIME PORTSMOUTH

PORTSMOUTH NAVAL SHIPYARD

ATTN: ALYSSA CARDONE-RYER

EMAIL: ALYSSA.CARDONE-RYER@DLA.MIL

KITTERY ME 03904-5000

9. DESTINATION (Consignee and address, including ZIP Code)

7. DELIVERY

[ ] FOB

DESTINATION

[ ] OTHER X

(See Schedule)

19-Aug-2022(Date)

PLEASE FURNISH QUOTATIONS TO THE ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS:10.

207-438-1931ALYSSA G. CARDONE-RYER

(Name and Telephone no.) (No collect calls)5b. FOR INFORMATION CALL:

d. CALENDAR DAYSc. 30 CALENDAR DAYSb. 20 CALENDAR DAYS12. DISCOUNT FOR PROMPT PAYMENT a. 10 CALENDAR DAYS

SPMYM322Q8062

Section A - Solicitation/Contract Form

RFQ IMPORTANT NOTES

AWARD – SINGLE AWARD FOR ALL ITEMS

Due to the interrelationship of the items involved, the right is reserved to make a single award to the responsive offeror whose total proposal on all items is low.

DRAWINGS

DRAWINGS REQUIRED FOR CLINS 0033, 0035, 0041 AND 0043 TO BE PROVIDED

SEPERATELY UPON RECEIPT OF A VALID DD FORM 2345 AND SIGNED

SECURITY AGREEMENT.

DELIVERIES

For ease of receipt and payment procedures, in lieu of one bulk delivery, please stagger deliveries as CLINS become available. This will allow for shorter inspection time frames and partial payments as CLINS are received and accepted.

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 72 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 1"-8UNRC-3A

X 4.500" LG.

MANUFACTURE IAW FF-S-86H TYPE IV. NOTE THAT PARA 3.1.4 &

PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO MEET THE

REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS NICKEL-

COPPER-ALUMINUM ALLOY, QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904013424001

PURCHASE REQUEST NUMBER: N39040134240010

PSC CD: 5350

NET AMT

DATA REQUIREMENTS FOR CLIN 0001

FFP

See Exhibit A

A001 1 Each

EXHIBIT A SEQ A001

FFP

CERTIFICATE OF COMPLIANCE

FOB: Destination

A002 1 Each

EXHIBIT A SEQ A002

FFP

CERTIFICATION DATA/REPORT

0003 72 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SAME AS CLIN 0001

FOB: Destination

MILSTRIP: N3904013424002

PC NR: 23

PURCHASE REQUEST NUMBER: N3904013424002

PROJECT: 5A3

DATA REQUIREMENTS FOR CLIN 0003

See Exhibit B

B001 1 Each

EXHIBIT B SEQ B001

FFP

CERTIFICATE OF COMPLIANCE

B002 1 Each

EXHIBIT B SEQ B002

FFP

CERTIFICATION / DATA REPORT

0005 6 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 5/8-11UNRC-

3A X 4.250" LG. MANUFACTURE IAW FF-S-86H TYPE IV. NOTE THAT

PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO

MEET THE REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS

NICKEL-COPPER-ALUMINUM ALLOY, QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904013424003

PC NR: 159

PURCHASE REQUEST NUMBER: N3904013424003

DATA REQUIREMENTS FOR CLIN 0005

See Exhibit C

C001 1 Each

EXHIBIT C SEQ C001

FFP

CERTIFICATE OF COMPLIANCE

C002 1 Each

EXHIBIT C SEQ C002

FFP

CERTIFICATION/DATA REPORT

0007 6 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SAME AS CLIN 0005

FOB: Destination

MILSTRIP: N3904013424004

PC NR: 159

PURCHASE REQUEST NUMBER: N3904013424004

DATA REQUIREMENTS FOR CLIN 0007

See Exhibit D

D001 1 Each

EXHIBIT D SEQ D001

FFP

CERTIFICATE OF COMPLIANCE

D002 1 Each

EXHIBIT D SEQ D002

FFP

CERTIFICATION/DATA REPORT

0009 17 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 5/8-11UNRC-

3A X 4.250" LG.

MFR. IAW FF-S-86H TYPE IV. NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF

FF-S-86H IS IN ERROR. FASTENERS ARE TO MEET THE REQUIREMENTS

OF TABLE X NOT TABLE VIII. MATERIAL IS NICUAL ALLOY, QQ-N-

286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904013484001

PURCHASE REQUEST NUMBER: N39040134840010

DATA REQUIREMENTS FOR CLIN 0009

See Exhibit E

E001 1 Each

EXHIBIT E SEQ E001

FFP

CERTIFICATE OF COMPLIANCE

E002 1 Each

EXHIBIT E SEQ E002

FFP

CERTIFICATION/DATA REPORT

0011 26 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 5/8-11UNRC-

3A X 4.500" LG. MFR. IAW FF-S-86H TYPE IV. NOTE THAT PARA 3.1.4 &

PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO MEET THE

REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS NICUAL

ALLOY, QQ-N-286G, UNS-N05500

FOB: Destination

MILSTRIP: N3904013484002

MFR PART NR: 68-14-5450

PC NR: 16

PURCHASE REQUEST NUMBER: N3904013484002

DATA REQUIREMENTS FOR CLIN 0011

See Exhibit F

F001 1 Each

EXHIBIT F SEQ F001

FFP

CERTIFICATE OF COMPLIANCE

F002 1 Each

EXHIBIT F SEQ F002

FFP

CERTIFICATION / DATA REPORT

0013 17 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 5/8-11UNRC-

3A X 5.000" LG. MFR. IAW FF-S-86H TYPE IV. NOTE THAT PARA 3.1.4 &

PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO MEET THE

REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS NICUAL

ALLOY, QQ-N-286G, UNS-N05500

FOB: Destination

MILSTRIP: N3904013484003

MFR PART NR: 68-14-5500

PC NR: 24

PURCHASE REQUEST NUMBER: N3904013484003

DATA REQUIREMENTS FOR CLIN 0013

See Exhibit G

G001 1 Each

EXHIBIT G SEQ G001

FFP

CERTIFICATE OF COMPLIANCE

G002 1 Each

EXHIBIT G SEQ G002

FFP

CERTIFICATION / DATA REPORT

0015 44 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 3/4-10UNRC-

3A X 4.250" LG. MFR. IAW FF-S-86H TYPE IV. NOTE THAT PARA 3.1.4 &

PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO MEET THE

REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS NICUAL

ALLOY, QQ-N-286G, UNS-N05500

FOB: Destination

MILSTRIP: N3904013484004

MFR PART NR: 68-14-6425

PC NR: 54

PURCHASE REQUEST NUMBER: N3904013484004

DATA REQUIREMENTS FOR CLIN 0015

See Exhibit H

H001 1 Each

EXHIBIT H SEQ H001

FFP

CERTIFICATE OF COMPLIANCE

H002 1 Each

EXHIBIT H SEQ H002

FFP

CERTIFICATION / DATA REPORT

0017 30 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 3/4-10UNRC-

3A X 2.750" LG.

MFR. IAW FF-S-86H TYPE IV. NOTE THAT PARA 3.1.4 & PARA 3.2.5 OF

FF-S-86 IS IN ERROR. FASTENERS ARE TO MEET THE REQUIREMENTS

OF TABLE X NOT TABLE VIII. MATERIAL IS NICUAL ALLOY, QQ-N-

286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904013494101

MFR PART NR: 68-14-6275

PC NR: 39

PURCHASE REQUEST NUMBER: N3904013494101

DATA REQUIREMENTS FOR CLIN 0017

See Exhibit J

J001 1 Each

EXHIBIT J SEQ J001

FFP

CERTIFICATE OF COMPLIANCE

J002 1 Each

EXHIBIT J SEQ J002

FFP

CERTIFICATION / DATA REPORT

0019 30 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SAME AS CLIN 0017

FOB: Destination

MILSTRIP: N3904013494102

MFR PART NR: 68-14-6275

PC NR: 39

PURCHASE REQUEST NUMBER: N3904013494102

DATA REQUIREMENTS FOR CLIN 0019

See Exhibit K

K001 1 Each

EXHIBIT K SEQ K001

FFP

CERTIFICATE OF COMPLIANCE

K002 1 Each

EXHIBIT K SEQ K002

FFP

CERTIFICATION / DATA REPORT

0021 17 Each

SOCKET HEAD CAP SCREW

FFP

SOCKET HEAD CAP SCREW, 3/4-10UNRC-3A X 3.750" LG. MFR IAW FF-S-

86H TYPE VI. NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN

ERROR. FASTENERS ARE TO MEET THE REQUIREMENTS OF TABLE X

NOT TABLE VIII. MATERIAL IS NICUAL ALLOY, QQ-N-286G, UNS-

N05500 FOB: Destination

MILSTRIP: N3904013494103

MFR PART NR: 68-12-6375

PC NR: 46

PURCHASE REQUEST NUMBER: N3904013494103

DATA REQUIREMENTS FOR CLIN 0021

See Exhibit L

L001 1 Each

EXHIBIT L SEQ L001

FFP

CERTIFICATE OF COMPLIANCE

L002 1 Each

EXHIBIT L SEQ L002

FFP

CERTIFICATION / DATA REPORT

0023 17 Each

SOCKET HEAD CAP SCREW

FFP

SAME ITEM AS CLIN 0021

FOB: Destination

MILSTRIP: N3904013494104

MFR PART NR: 68-12-6375

PC NR: 46

PURCHASE REQUEST NUMBER: N3904013494104

DATA REQUIREMENTS FOR CLIN 0023

See Exhibit M

M001 1 Each

EXHIBIT M SEQ M001

FFP

CERTIFICATE OF COMPLIANCE

M002 1 Each

EXHIBIT M SEQ M002

FFP

CERTIFICATION / DATA REPORT

0025 38 Each

SOCKET HEAD CAP SCREW

FFP

SOCKET HEAD CAP SCREW, 1.000-8UNRC-3A X 3.000" LG. MFR. IAW FF-

S-86H TYPE VI. NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN

ERROR. FASTENERS ARE TO MEET THE REQUIREMENTS OF TABLE X

NOT TABLE VIII. MATERIAL IS NICUAL ALLOY, QQ-N-286G, UNS-

N05500.

FOB: Destination

MILSTRIP: N3904013574001

PURCHASE REQUEST NUMBER: N39040135740010

DATA REQUIREMENTS FOR CLIN 0025

See Exhibit N

N001 1 Each

EXHIBIT N SEQ N001

FFP

CERTIFICATE OF COMPLIANCE

N002 1 Each

EXHIBIT N SEQ N002

FFP

CERTIFICATION / DATA REPORT

0027 215 Each

SOCKET HEAD CAP SCREW

FFP

SOCKET HEAD CAP SCREW, 1.000-8UNRC-3A X 2.500" LG. MFR. IAW FF-

S-86H TYPE VI. NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN

ERROR. FASTENERS ARE TO MEET THE REQUIREMENTS OF TABLE X

NOT TABLE VIII. MATERIAL IS NICUAL ALLOY, QQ-N-286G, UNS-

N05500.

FOB: Destination

MILSTRIP: N3904013574002

PC NR: 204

PURCHASE REQUEST NUMBER: N3904013574002

DATA REQUIREMENTS FOR CLIN 0027

See Exhibit P

P001 1 Each

EXHIBIT P SEQ P001

FFP

CERTIFICATE OF COMPLIANCE

P002 1 Each

EXHIBIT P SEQ P002

FFP

CERTIFICATION / DATA REPORT

0029 506 Each

SOCKET HEAD CAP SCREW

FFP

SOCKET HEAD CAP SCREW, 0.625-11UNRC-3A X 4.00" LG. MFR IAW FF-

S-86H TYPE IV. NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN

ERROR. FASTENERS ARE TO MEET THE REQUIREMENTS OF TABLE X

NOT TABLE VIII. MATERIAL IS NICUAL ALLOY, QQ-N-286G, UNS-

N05500.

FOB: Destination

MILSTRIP: N3904013574003

PC NR: 18

PURCHASE REQUEST NUMBER: N3904013574003

DATA REQUIREMENTS FOR CLIN 0029

See Exhibit Q

Q001 1 Each

EXHIBIT Q SEQ Q001

FFP

CERTIFICATE OF COMPLIANCE

Q002 1 Each

EXHIBIT Q SEQ Q002

FFP

CERTIFICATION / DATA REPORT

0031 260 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 0.500-

13UNRC-3A X 2.750" LG. MFR IAW FF-S-86H TYPE IV. NOTE THAT PARA

3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO MEET

THE REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS

NICUAL ALLOY, QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904013574004

PC NR: 171

PURCHASE REQUEST NUMBER: N3904013574004

DATA REQUIREMENTS FOR CLIN 0031

See Exhibit R

R001 1 Each

EXHIBIT R SEQ R001

FFP

CERTIFICATE OF COMPLIANCE

R002 1 Each

EXHIBIT R SEQ R002

FFP

CERTIFICATION / DATA REPORT

0033 74 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, .875-9UNC-

3A X 7.2" LG. MANUFACTURE IAW FF-S-86H TYPE IV & SHEET 16,

DETAIL 16-2E OF DWG 167-6984980-XB. NOTE THAT PARA 3.1.4 & PARA.

3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO MEET THE

REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS NICUAL,

QQ-N-286G, FORM-2, ANNEALED, AGE HARDENED, FINISH B (AS

DRAWN).

FOB: Destination

MILSTRIP: N3904013624101

PC NR: 268

PURCHASE REQUEST NUMBER: N3904013624101

DATA REQUIREMENTS FOR CLIN 0033

See Exhibit S

S001 1 Each

EXHIBIT S SEQ S001

FFP

CERTIFICATE OF COMPLIANCE

S002 1 Each

EXHIBIT S SEQ S002

FFP

CERTIFICATION / DATA REPORT

0035 3 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, .875-9UNC-

3A X 15" LG. MANUFACTURE IAW FF-S-86H TYPE IV & SHEET 16,

DETAIL 16-2F OF

DWG 167-6984980-XB. NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H

IS IN ERROR. FASTENERS ARE TO MEET THE REQUIREMENTS OF

TABLE X NOT TABLE VIII. MATERIAL IS NICUAL, QQ-N-286G, FORM-2,

ANNEALED, AGE HARDENED, FINISH B (AS DRAWN).

FOB: Destination

MILSTRIP: N3904013624102

PC NR: 269

PURCHASE REQUEST NUMBER: N3904013624102

DATA REQUIREMENTS FOR CLIN 0035

See Exhibit T

T001 1 Each

EXHIBIT T SEQ T001

FFP

CERTIFICATE OF COMPLAINCE

T002 1 Each

EXHIBIT T SEQ T002

FFP

CERTIFICATION / DATA REPORT

0037 510 Each

SOCKET HEAD CAP SCREW

FFP

SOCKET HEAD CAP SCREW, 0.750-10UNRC-3A X 2.750" LG. MFR. IAW

FF-S-86H TYPE VI. NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS

IN ERROR. FASTENERS ARE TO MEET THE REQUIREMENTS OF TABLE

X NOT TABLE VIII. MATERIAL IS NICUAL, QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904013634001

MFR PART NR: 68-12-6275

PC NR: 945

PURCHASE REQUEST NUMBER: N3904013634001

DATA REQUIREMENTS FOR CLIN 0037

See Exhibit U

U001 1 Each

EXHIBIT U SEQ U001

FFP

CERTIFICATE OF COMPLIANCE

U002 1 Each

EXHIBIT U SEQ U002

FFP

CERTIFICATION / DATA REPORT

0039 360 Each

SOCKET HEAD CAP SCREW

FFP

SOCKET HEAD CAP SCREW, 0.500-13UNRC-3A X 3.000" LG. MFR IAW FF-

S-86H TYPE VI. NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN

ERROR. FASTENERS ARE TO MEET THE REQUIREMENTS OF TABLE X

NOT TABLE VIII. , QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904013634002

MFR PART NR: 68-12-4300

PC NR: 990

PURCHASE REQUEST NUMBER: N3904013634002

DATA REQUIREMENTS FOR CLIN 0039

See Exhibit V

V001 1 Each

EXHIBIT V SEQ V001

FFP

CERTIFICATE OF COMPLIANCE

V002 1 Each

EXHIBIT V SEQ V002

FFP

CERTIFICATION / DATA REPORT

0041 34 Each

SOCKET HEAD CAP SCREW SPECIAL

FFP

SOCKET HEAD CAP SCREW SPECIAL, .625-11UNC-3A X 3.8" LG, (5.8"

LONG OVERALL). MANUFACTURE IAW FF-S-86H TYPE VI & SHEET 15,

DETAIL 15-4G OF DWG H443-0106 REV A. NOTE THAT PARA 3.1.4 &

PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO MEET THE

REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS NICUAL,

QQ-N-286G, FORM-2, ANNEALED, AGE HARDENED, FINISH B (AS

DRAWN).

FOB: Destination

MILSTRIP: N3904013644001

PURCHASE REQUEST NUMBER: N39040136440010

DATA REQUIREMENTS FOR CLIN 0041

See Exhibit W

W001 1 Each

EXHIBIT W SEQ W001

FFP

CERTIFICATE OF COMPLIANCE

W002 1 Each

EXHIBIT W SEQ W002

FFP

CERTIFICATION / DATA REPORT

0043 34 Each

SOCKET HEAD CAP SCREW SPECIAL

FFP

SAME AS ITEM 0041

FOB: Destination

MILSTRIP: N3904013644002

PURCHASE REQUEST NUMBER: N39040136440020

DATA REQUIREMENTS FOR CLIN 0043

See Exhibit X

X001 1 Each

EXHIBIT X SEQ X001

FFP

CERTIFICATE OF COMPLIANCE

X002 1 Each

EXHIBIT X SEQ X002

FFP

CERTIFICATION / DATA REPORT

0045 50 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 0.500-

13UNRC-3A X 2.500" LG. MFR. IAW FF-S-86H TYPE IV. NOTE THAT PARA

3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO MEET

THE REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS

NICUAL ALLOY, QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904020064101

PC NR: 141

PURCHASE REQUEST NUMBER: N3904020064101

DATA REQUIREMENTS FOR CLIN 0045

See Exhibit Y

Y001 1 Each

EXHIBIT Y SEQ Y001

FFP

CERTIFICATE OF COMPLIANCE

Y002 1 Each

EXHIBIT Y SEQ Y002

FFP

CERTIFICATION / DATA REPORT

0047 50 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SAME ITEM AS CLIN 0045

FOB: Destination

MILSTRIP: N3904020064102

PC NR: 141

PURCHASE REQUEST NUMBER: N3904020064102

DATA REQUIREMENTS FOR CLIN 0047

See Exhibit Z

Z001 1 Each

EXHIBIT Z SEQ Z001

FFP

CERTIFICATE OF COMPLIANCE

Z002 1 Each

EXHIBIT Z SEQ Z002

FFP

CERTIFICATION / DATA REPORT

0049 50 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SAME ITEM AS CLIN 0045

FOB: Destination

MILSTRIP: N3904020064103

PC NR: 141

PURCHASE REQUEST NUMBER: N3904020064103

DATA REQUIREMENTS FOR CLIN 0049

See Exhibit AA

AA01 1 Each

EXHIBIT AA SEQ AA01

FFP

CERTIFICATE OF COMPLIANCE

AA02 1 Each

EXHIBIT A SEQ AA02

FFP

CERTIFICATION / DATA REPORT

0051 50 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SAME ITEM AS CLIN 0045

FOB: Destination

MILSTRIP: N3904020064104

PC NR: 141

PURCHASE REQUEST NUMBER: N3904020064104

DATA REQUIREMENTS FOR CLIN 0051

See Exhibit AB

AB01 1 Each

EXHIBIT AB SEQ AB01

FFP

CERTIFICATEOF COMPLIANCE

AB02 1 Each

EXHIBIT AB SEQ AB02

FFP

CERTIFICATION / DATA REPORT

0053 21 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 0.750-

10UNRC-3A X 2.000 IN. LG. MFR. IAW FF-S-86H TYPE IV. NOTE THAT

PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO

MEET THE REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS

NICUAL ALLOY, QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904020134001

PC NR: 51

PURCHASE REQUEST NUMBER: N3904020134001

DATA REQUIREMENTS FOR CLIN 0053

See Exhibit AC

AC01 1 Each

EXHIBIT AC SEQ AC01

FFP

CERTIFICATE OF COMPLIANCE

AC02 1 Each

EXHIBIT AC SEQ AC02

FFP

CERTIFICATION / DATA REPORT

0055 50 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 0.750-

10UNRC-3A X 2.750 IN. LG. MFR. IAW FF-S-86H TYPE IV. NOTE THAT

PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO

MEET THE REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS

NICUAL ALLOY, QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904020134002

PC NR: 39

PURCHASE REQUEST NUMBER: N3904020134002

DATA REQUIREMENTS FOR CLIN 0055

See Exhibit AD

AD01 1 Each

EXHIBIT AD SEQ AD01

FFP

CERTIFICATE OF COMPLIANCE

AD02 1 Each

EXHIBIT AD SEQ AD02

FFP

CERTIFICATION / DATA REPORT

0057 56 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 1.000-

8UNRC-3A X 3.500 IN. LG. MFR IAW FF-S-86H TYPE IV. NOTE THAT

PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO

MEET THE REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS

NICUAL ALLOY, QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904020134003

PC NR: 42

PURCHASE REQUEST NUMBER: N3904020134003

DATA REQUIREMENTS FOR CLIN 0057

See Exhibit AE

AE01 1 Each

EXHIBIT AE SEQ AE01

FFP

CERTIFICATE OF COMPLIANCE

AE02 1 Each

EXHIBIT AE SEQ AE02

FFP

CERTIFICATION / DATA REPORT

0059 29 Each

SOCKET FLAT COUNTERSUNK HEAD SAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 1.000-

8UNRC-3A X 5.000 IN. LG. MFR. IAW FF-S-86H TYPE IV. NOTE THAT

PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO

MEET THE REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS

NICUAL ALLOY, QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904020134004

PC NR: 43

PURCHASE REQUEST NUMBER: N3904020134004

DATA REQUIREMENTS FOR CLIN 0059

See Exhibit AF

AF01 1 Each

EXHIBIT AF SEQ AF01

FFP

CERTIFICATE OF COMPLIANCE

AF02 1 Each

EXHIBIT AF SEQ AF02

FFP

CERTIFICATION / DATA REPORT

0061 60 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE S/L, 0.625-

11UNRC-3A X 2.000 IN. LG. MFR. IAW FF-S-86H TYPE IV. NOTE THAT

PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO

MEET THE REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS

NICUAL ALLOY, QQ-N-286G, UNS-N05500. MAKE SELF-LOCKING IAW

MIL-DTL-18240F AMEND 1 TYPE “N”. MARKINGS OF A MINIMUM (6)

DOTS (APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED

(APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD OF THE

FASTENER (TOP PREFERRED. SIDE LOCATION IF NECESSARY).

FOB: Destination

MILSTRIP: N3904020134101

PC NR: 51

PURCHASE REQUEST NUMBER: N3904020134101

DATA REQUIREMENTS FOR CLIN 0061

See Exhibit AG

AG01 1 Each

EXHIBIT AG SEQ AG01

FFP

CERTIFICATE OF COMPLIANCE

AG02 1 Each

EXHIBIT AG SEQ AG02

FFP

CERTIFICATION / DATA REPORT

0063 52 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE S/L, 0.625-

11UNRC-3A X 2.000 IN. LG. MFR. IAW FF-S-86H TYPE IV. NOTE THAT

PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO

MEET THE REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS

NICUAL ALLOY, QQ-N-286G, UNS-N05500. MAKE SELF-LOCKING IAW

MIL-DTL-

18240F AMEND 1 TYPE "L". MARKINGS OF A MINIMUM (6) DOTS

(APPROXIMATELY

0.032 DIA) RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL BE

PLACED ON THE

HEAD OF THE FASTENER (TOP PREFERRED. SIDE LOCATION IF

NECESSARY).

FOB: Destination

MILSTRIP: N3904020134102

PC NR: 329

PURCHASE REQUEST NUMBER: N3904020134102

DATA REQUIREMENTS FOR CLIN 0063

See Exhibit AH

AH01 1 Each

EXHIBIT AH SEQ AH01

FFP

CERTIFICATE OF COMPLIANCE

AH02 1 Each

EXHIBIT AH SEQ AH02

FFP

CERTIFICATION / DATA REPORT

0065 44 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE S/L, 0.500-

13UNRC-3A X 1.500 IN. LG. MFR. IAW FF-S-86H TYPE IV. NOTE THAT

PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO

MEET THE REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL

IS NICUAL ALLOY, QQ-N-286G, UNS-N05500. MAKE SELF-LOCKING IAW

MIL-DTL-18240F AMEND 1 TYPE “N”. MARKINGS OF A MINIMUM (6)

DOTS (APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED

(APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD OF THE

FASTENER (TOP PREFERRED. SIDE LOCATION IF NECESSARY).

FOB: Destination

MILSTRIP: N3904020134103

PC NR: 269

PURCHASE REQUEST NUMBER: N3904020134103

DATA REQUIREMENTS FOR CLIN 0065

See Exhibit AJ

AJ01 1 Each

EXHIBIT AJ SEQ AJ01

FFP

CERTIFICATE OF COMPLIANCE

AJ02 1 Each

EXHIBIT AJ SEQ AJ02

FFP

CERTIFICATION / DATA REPORT

0067 37 Each

SOCKET HEAD CAP SCREW

FFP

SOCKET HEAD CAP SCREW, 0.500-13UNRC-3A X 3.250 IN. LG. MFR. IAW

FF-S-86H TYPE VI. NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS

IN ERROR. FASTENERS ARE TO MEET THE REQUIREMENTS OF TABLE

X NOT TABLE VIII. MATERIAL IS NICUAL, QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904020194001

PURCHASE REQUEST NUMBER: N39040201940010

DATA REQUIREMENTS FOR CLIN 0067

See Exhibit AK

AK01 1 Each

EXHIBIT AK SEQ AK01

FFP

CERTIFICATE OF COMPLIANCE

AK02 1 Each

EXHIBIT AK SEQ AK02

FFP

CERTIFICATION / DATA REPORT

0069 37 Each

SOCKET HEAD CAP SCREW

FFP

SOCKET HEAD CAP SCREW, 0.500-13UNRC-3A X 2.250 IN. LG. MFR. IAW

FF-S-86H TYPE VI. NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS

IN ERROR. FASTENERS ARE TO MEET THE REQUIREMENTS OF TABLE

X NOT TABLE VIII. MATERIAL IS NICUAL ALLOY, QQ-N-286G, UNS-

N05500.

FOB: Destination

MILSTRIP: N3904020194002

PC NR: 992

PURCHASE REQUEST NUMBER: N3904020194002

DATA REQUIREMENTS FOR CLIN 0069

See Exhibit AL

AL01 1 Each

EXHIBIT AL SEQ AL01

FFP

CERTIFICATE OF COMPLIANCE

AL02 1 Each

EXHIBIT AL SEQ AL02

FFP

CERTIFICATION / DATA REPORT

0071 56 Each

SOCKET HEAD CAP SCREW

FFP

SOCKET HEAD CAP SCREW, 0.625-11UNRC-3A X 3.500 IN. LG. MFR. IAW

FF-S-86H TYPE VI. NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS

IN ERROR. FASTENERS ARE TO MEET THE REQUIREMENTS OF TABLE

X NOT TABLE VIII. MATERIAL IS NICUAL, QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904020194003

PC NR: 16

PURCHASE REQUEST NUMBER: N3904020194003

DATA REQUIREMENTS FOR CLIN 0071

See Exhibit AM

AM01 1 Each

EXHIBIT AM SEQ AM01

FFP

CETIFICATE OF COMPLIANCE

AM02 1 Each

EXHIBIT AM SEQ AM02

FFP

CERTIFICATION / DATA REPORT

0073 70 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 0.875-

9UNRC-3A X 3.000 IN. LG. MFR. IAW FF-S-86H TYPE IV. NOTE THAT

PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO

MEET THE REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS

NICUAL ALLOY, QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904020194011

PURCHASE REQUEST NUMBER: N39040201940110

DATA REQUIREMENTS FOR CLIN 0073

See Exhibit AN

AN01 1 Each

EXHIBIT AN SEQ AN01

FFP

CERTIFICATE OF COMPLIANCE

AN02 1 Each

EXHIBIT AN SEQ AN02

FFP

CERTIFICATION / DATA REPORT

0075 18 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 0.500-

13UNRC-3A X 5.000 IN. LG. MFR. IAW FF-S-86H TYPE IV. NOTE THAT

PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO

MEET THE REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS

NICUAL ALLOY, QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904020194012

PC NR: 10

PURCHASE REQUEST NUMBER: N3904020194012

DATA REQUIREMENTS FOR CLIN 0075

See Exhibit AP

AP01 1 Each

EXHIBIT AP SEQ AP01

FFP

CERTIFICATE OF COMPLIANCE

AP02 1 Each

EXHIBIT AP SEQ AP02

FFP

CERTIFICATION / DATA REPORT

0077 18 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SAME ITEM AS CLIN 0075

FOB: Destination

MILSTRIP: N3904020194013

PC NR: 10

PURCHASE REQUEST NUMBER: N3904020194013

DATA REQUIREMENTS FOR CLIN 0077

See Exhibit AQ

AQ01 1 Each

EXHIBIT AQ SEQ AQ01

FFP

CERTIFICATE OF COMPLIANCE

AQ02 1 Each

EXHIBIT AQ SEQ AQ02

FFP

CERTIFICATION / DATA REPORT

0079 45 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE SELF-

LOCKING, 0.500-13UNRC-3A X 1.500 IN. LG. MFR. IAW FF-S-86H TYPE IV.

NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR.

FASTENERS ARE TO MEET THE REQUIREMENTS OF TABLE X NOT

TABLE VIII. MATERIAL IS NICUAL, QQ-N-286G, UNS-N05500. SELF-

LOCKING IAW MIL-DTL-18240F AMEND 1 TYPE "N". MARKINGS OF A

MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED OR

DEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED ON THE

HEAD OF THE FASTENER (TOP PREFERRED. SIDE LOCATION IF

NECESSARY).

FOB: Destination

MILSTRIP: N3904020334001

PURCHASE REQUEST NUMBER: N39040203340010

DATA REQUIREMENTS FOR CLIN 0079

See Exhibit AR

AR01 1 Each

EXHIBIT AR SEQ AR01

FFP

CERTIFICATE OF COMPLIANCE

AR02 1 Each

EXHIBIT AR SEQ AR02

FFP

CERTIFICATION / DATA REPORT

0081 21 Each

SOCKET HEAD CAP SCREW

FFP

SOCKET HEAD CAP SCREW, 0.750-10UNRC-3A X 3.000 IN. LG. MFR. IAW

FF-S-86H TYPE VI. NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS

IN ERROR. FASTENERS ARE TO MEET THE REQUIREMENTS OF TABLE

X NOT TABLE VIII. , MATERIAL IS NICUAL, QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904020334002

PURCHASE REQUEST NUMBER: N39040203340020

DATA REQUIREMENTS FOR CLIN 0081

See Exhibit AS

AS01 1 Each

EXHIBIT AS SEQ AS01

FFP

CETIFICATE OF COMPLIANCE

AS02 1 Each

EXHIBIT AS SEQ AS02

FFP

CERTIFICATION / DATA REPORT

0083 9 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 0.500-

13UNRC-3A X 2.250 IN. LG. MFR. IAW FF-S-86H TYPE IV. NOTE THAT

PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO

MEET THE REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS

NICUAL, QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904020334003

PC NR: 41

PURCHASE REQUEST NUMBER: N3904020334003

DATA REQUIREMENTS FOR CLIN 0083

See Exhibit AT

AT01 1 Each

EXHIBIT AT SEQ AT01

FFP

CERTIFICATE OF COMPLIANCE

AT02 1 Each

EXHIBIT AT SEQ AT02

FFP

CERTIFICATION / DATA REPORT

0085 17 Each

SOCKET HEAD CAP SCREW

FFP

SOCKET HEAD CAP SCREW, 0.750-10UNRC-3A X 3.750 IN. LG. MFR. IAW

FF-S-86H TYPE VI. NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS

IN ERROR. FASTENERS ARE TO MEET THE REQUIREMENTS OF TABLE

X NOT TABLE VIII. MATERIAL IS NICUAL, QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904020334004

PC NR: 46

PURCHASE REQUEST NUMBER: N3904020334004

DATA REQUIREMENTS FOR CLIN 0085

See Exhibit AU

AU01 1 Each

EXHIBIT AU SEQ AU01

FFP

CETIFICATE OF COMPLIANCE

AU02 1 Each

EXHIBIT AU SEQ AU02

FFP

CERTIFICATION / DATA REPORT

0087 24 Each

HEX HEAD CAP SCREW

FFP

HEX HEAD CAP SCREW, 0.875-9UNC-2A X 4.000 IN. LG. MFR. IAW MIL-

DTL-1222J TYPE I. MATERIAL IS NICKEL ALLOY, GRADE 625.

FOB: Destination

MILSTRIP: N3904020344011

PURCHASE REQUEST NUMBER: N39040203440110

DATA REQUIREMENTS FOR CLIN 0087

See Exhibit AV

AV01 1 Each

EXHIBIT AV SEQ AV01

FFP

CERTIFICATE OF COMPLIANCE

AV02 1 Each

EXHIBIT AV SEQ AV02

FFP

CERTIFICATION / DATA REPORT

0089 12 Each

SOCKET HEAD CAP SCREW S/L

FFP

SOCKET HEAD CAP SCREW SELF-LOCKING, 0.500-13UNRC-3A X 1.500

IN. LG. MFR. IAW FFS-86H TYPE VI. NOTE THAT PARA 3.1.4 & PARA.

3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO MEET THE

REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS NICU, QQ-

N-281D AMEND 2, CLASS A. SELF-LOCKING IAW MIL-DTL-18240F AMEN

1 TYPE "N". MARKINGS OF A MINIMUM (6) DOTS (APPROXIMATELY

0.032 DIA) RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL BE

PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED. SIDE

LOCATION IF NECESSARY).

FOB: Destination

MILSTRIP: N3904020344012

PURCHASE REQUEST NUMBER: N39040203440120

DATA REQUIREMENTS FOR CLIN 0089

See Exhibit AW

AW01 1 Each

EXHIBIT AW SEQ AW01

FFP

CERTIFICATE OF COMPLIANCE

AW02 1 Each

EXHIBIT AW SEQ AW02

FFP

CERTIFICATION / DATA REPORT

0091 9 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 0.750-

10UNRC-3A X 7.250 IN. LG. MFR. IAW FF-S-86H TYPE IV. NOTE THAT

PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO

MEET THE REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS

NICUAL QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904020344013

PURCHASE REQUEST NUMBER: N39040203440130

DATA REQUIREMENTS FOR CLIN 0091

See Exhibit AX

AX01 1 Each

EXHIBIT AX SEQ AX01

FFP

CERTIFICATE OF COMPLIANCE

AX02 1 Each

EXHIBIT AX SEQ AX02

FFP

CERTIFICATION / DATA REPORT

0093 13 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 0.625-

11UNRC-3A X 4.000 IN. LG. MFR. IAW FF-S-86H TYPE IV. NOTE THAT

PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO

MEET THE REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS

NICUAL, QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904020344014

PURCHASE REQUEST NUMBER: N39040203440140

DATA REQUIREMENTS FOR CLIN 0093

See Exhibit AY

AY01 1 Each

EXHIBIT AY SEQ AY01

FFP

CERTIFICATE OF COMPLIANCE

AY02 1 Each

EXHIBIT AY SEQ AY02

FFP

CERTIFICATION / DATA REPORT

0095 8 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 0.750-

10UNRC-3A X 5.750 IN. LONG. MFR. IAW FF-S-86H TYPE IV. NOTE THAT

PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO

MEET THE REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS

NICUAL ALLOY, QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904020404001

PURCHASE REQUEST NUMBER: N39040204040010

DATA REQUIREMENTS FOR CLIN 0095

See Exhibit AZ

AZ01 1 Each

EXHIBIT AZ SEQ AZ01

FFP

CERTIFICATE OF COMPLIANCE

AZ02 1 Each

EXHIBIT AZ SEQ AZ02

FFP

CERTIFICATION / DATA REPORT

0097 9 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE, 0.500-

13UNRC-3A X 2.750 IN LONG. MFR. IAW FF-S-86H TYPE IV. NOTE THAT

PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR. FASTENERS ARE TO

MEET THE REQUIREMENTS OF TABLE X NOT TABLE VIII. MATERIAL IS

NICUAL ALLOY QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904020404002

MFR PART NR: 68-14-4275

PC NR: 953

PURCHASE REQUEST NUMBER: N3904020404002

DATA REQUIREMENTS FOR CLIN 0097

See Exhibit BA

BA01 1 Each

EXHIBIT BA SEQ BA01

FFP

CERTIFICATE OF COMPLIANCE

BA02 1 Each

EXHIBIT BA SEQ BA02

FFP

CERTIFICATION / DATA REPORT

0099 9 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SAME ITEM AS CLIN 0097

FOB: Destination

MILSTRIP: N3904020404003

MFR PART NR: 68-14-4275

PC NR: 977

PURCHASE REQUEST NUMBER: N3904020404003

DATA REQUIREMENTS FOR CLIN 0099

See Exhibit BB

BB01 1 Each

EXHIBIT BB SEQ BB01

FFP

CERTIFICATE OF COMPLIANCE

BB02 1 Each

EXHIBIT BB SEQ BB02

FFP

CERTIFICATION / DATA REPORT

0101 6 Each

HEX HEAD CAP SCREW S/L

FFP

HEX HEAD CAP SCREW SELF LOCKING, 1.000-8UNC-2A X 2.250 IN. LG.

MFR. IAW MIL-DTL-1222J TYPE I. MATERIAL IS NICUAL ALLOY, QQ-N-

286G, UNS-N05500. SELF-LOCKING IAW MIL-DTL-18240F AMEND 1 TYPE

"N". MARKINGS OF A MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA)

RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED

ON THE HEAD OF THE FASTENER (TOP PREFERRED. SIDE LOCATION IF

NECESSARY).

FOB: Destination

MILSTRIP: N3904020534111

PC NR: 21

PURCHASE REQUEST NUMBER: N3904020534111

DATA REQUIREMENTS FOR CLIN 0101

See Exhibit BC

BC01 1 Each

EXHIBIT BC SEQ BC01

FFP

CERTIFICATE OF COMPLIANCE

BC02 1 Each

EXHIBIT BC SEQ BC02

FFP

CERTIFICATION / DATA REPORT

0103 24 Each

HEX HEAD CAP SCREW

FFP

HEX HEAD CAP SCREW, 0.750-10UNC-3A X 3.000 IN. LG. MFR. IAW ASTM

F468-16. MATERIAL IS NICUAL ALLOY, QQ-N-286G, UNS-N05500, ALLOY

500.

FOB: Destination

MILSTRIP: N3904020534112

PC NR: 19

PURCHASE REQUEST NUMBER: N3904020534112

DATA REQUIREMENTS FOR CLIN 0103

See Exhibit BD

BD01 1 Each

EXHIBIT BD SEQ BD01

FFP

CERTIFICATE OF COMPLIANCE

BD02 1 Each

EXHIBIT BD SEQ BD02

FFP

CERTIFICATION / DATA REPORT

0105 12 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE SELF

LOCKING, 0.750-10UNRC-3A X 1.750 IN. LG. MFR IAW FF-S-86H TYPE IV.

NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS IN ERROR.

FASTENERS ARE TO MEET THE REQUIREMENTS OF TABLE X NOT

TABLE VIII. MATERIAL IS NICUAL ALLOY, QQ-N-286G, UNS-N05500.

SELF LOCKING IAW

MIL-DTL-18240F (1) TYPE "N". MARKINGS OF A MINIMUM (6) DOTS

(APPROXIMATELY

0.032 DIA) RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL BE

PLACED ON THE

HEAD OF THE FASTENER (TOP PREFERRED. SIDE LOCATION IF

NECESSARY

FOB: Destination

MILSTRIP: N3904020604001

PURCHASE REQUEST NUMBER: N39040206040010

DATA REQUIREMENTS FOR CLIN 0105

See Exhibit BE

BE01 1 Each

EXHIBIT BE SEQ BE01

FFP

CERTIFICATE OF COMPLIANCE

BE02 1 Each

EXHIBIT BE SEQ BE02

FFP

CERTIFICATION / DATA REPORT

0107 12 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SAME ITEM AS CLIN 0105

FOB: Destination

MILSTRIP: N3904020604002

PURCHASE REQUEST NUMBER: N39040206040020

DATA REQUIREMENTS FOR CLIN 0107

See Exhibit BF

BF01 1 Each

EXHIBIT BF SEQ BF01

FFP

CERTIFICATE OF COMPLIANCE

BF02 1 Each

EXHIBIT BF SEQ BF02

FFP

CERTIFICATION / DATA REPORT

0109 4 Each

SOCKET HEAD CAP SCREW

FFP

SOCKET HEAD CAP SCREW, 0.500-13UNRC-3A X 4.000 IN. LG. MFR. IAW

FF-S-86H TYPE VI. NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-86H IS

IN ERROR. FASTENERS ARE TO MEET THE REQUIREMENTS OF TABLE

X NOT TABLE VIII. MATERIAL IS NICUAL, QQ-N-286G, UNS-N05500.

FOB: Destination

MILSTRIP: N3904020614101

PURCHASE REQUEST NUMBER: N39040206141010

DATA REQUIREMENTS FOR CLIN 0109

See Exhibit BG

BG01 1 Each

EXHIBIT BG SEQ BG01

FFP

CERTIFICATE OF COMPLIANCE

BG02 1 Each

EXHIBIT BG SEQ BG02

FFP

CERTIFICATION / DATA REPORT

0111 4 Each

SOCKET HEAD CAP SCREW

FFP

SAME ITEM AS CLIN 0109

FOB: Destination

MILSTRIP: N3904020614102

PURCHASE REQUEST NUMBER: N39040206141020

DATA REQUIREMENTS FOR CLIN 0111

See Exhibit BH

BH01 1 Each

EXHIBIT BH SEQ BH01

FFP

CERTIFICATE OF COMPLIANCE

BH02 1 Each

EXHIBIT BH SEQ BH02

FFP

CERTIFICATION / DATA REPORT

0113 4 Each

SOCKET HEAD CAP SCREW

FFP

SAME ITEM AS CLIN 0109

FOB: Destination

MILSTRIP: N3904020614103

PC NR: 26

PURCHASE REQUEST NUMBER: N3904020614103

DATA REQUIREMENTS FOR CLIN 0113

See Exhibit BJ

BJ01 1 Each

EXHIBIT BJ SEQ BJ01

FFP

CERTIFICATE OF COMPLIANCE

BJ02 1 Each

EXHIBIT BJ SEQ BJ02

FFP

CERTIFICATION / DATA REPORT

0115 4 Each

SOCKET HEAD CAP SCREW

FFP

SAME ITEM AS CLIN 0109

FOB: Destination

MILSTRIP: N3904020614104

PC NR: 26

PURCHASE REQUEST NUMBER: N3904020614104

DATA REQUIREMENTS FOR CLIN 0115

See Exhibit BK

BK01 1 Each

EXHIBIT BK SEQ BK01

FFP

CERTIFICATE OF COMPLIANCE

BK02 1 Each

EXHIBIT BK SEQ BK02

FFP

CERTIFICATION / DATA REPORT

0117 6 Each

SOCKET HEAD CAP SCREW S/L

FFP

SOCKET HEAD CAP SCREW SELF-LOCKING, 1.500-6UNC-2A X 4.500 IN.

LONG FF-S-86H TYPE-VI. NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FF-S-

86H IS IN ERROR. FASTENERS ARE TO MEET THE REQUIREMENTS OF

TABLE X NOT TABLE VIII. MATERIAL TO BE NICKEL COPPER

ALUMINUM ALLOY QQ-N-286G. SELF-LOCKING IAW MIL-DTL-

18240F(1)MOD TYPE-N. MARKINGS OF A MINIMUM OF SIX (6) DOTS

(APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED

(APPROXIMATELY .010) SHALL BE PLACED ON THE HEAD OF THE

FASTENER (TOP PREFERRED, SIDE LOCATION IF NECESSARY). MOD =

INSERT DIAMETER 0.281" +/- 0.010", DEPTH OF INSERT HOLE 0.250" MIN

- 0.281" MAX, DISTANCE FROM INSERT HOLE C/L TO END OF BOLT

0.557" MIN - 0.723" MAX, DIAMETERAL DIMENSION AS INSERT

LOCATION 1.492" MIN - 1.502" MAX, BREAKAWAY TORQUE 243 IN/LB

MIN.

FOB: Destination

MILSTRIP: N3904021114001

PURCHASE REQUEST NUMBER: N3904021114001

DATA REQUIREMENTS FOR 0117

See Exhibit BL

BL01 1 Each

EXHIBIT BL SEQ BL01

FFP

CERTIFICATE OF COMPLIANCE

BL02 1 Each

EXHIBIT BL SEQ BL02

FFP

CERTIFICATION / DATA REPORT

0119 6 Each

SOCKET HEAD CAP SCREW S/L

FFP

SAME ITEM AS CLIN 0117

FOB: Destination

MILSTRIP: N3904021114002

PURCHASE REQUEST NUMBER: N3904021114002

DATA REQUIREMENTS FOR CLIN 0019

See Exhibit BM

BM01 1 Each

EXHIBIT BM SEQ BM01

FFP

CERTIFICATE OF COMPLIANCE

BM02 1 Each

EXHIBIT BM SEQ BM02

FFP

CERTIFICATION / DATA REPORT

0121 6 Each

SOCKET HEAD CAP SCREW S/L

FFP

SAME ITEM AS CLIN 0117

FOB: Destination

MILSTRIP: N3904021114003

PURCHASE REQUEST NUMBER: N3904021114003

DATA REQUIREMENTS FOR CLIN 0121

See Exhibit BN

BN01 1 Each

EXHIBIT BN SEQ BN01

FFP

CERTIFICATE OF COMPLIANCE

BN02 1 Each

EXHIBIT BN SEQ BN02

FFP

CERTIFICATION / DATA REPORT

0123 6 Each

SOCKET HEAD CAP SCREW S/L

FFP

SAME ITEM AS CLIN 0117

FOB: Destination

MILSTRIP: N3904021114004

PURCHASE REQUEST NUMBER: N3904021114004

DATA REQUIREMENTS FOR CLIN 0123

See Exhibit BP

BP01 1 Each

EXHIBIT BP SEQ BP01

FFP

CERTIFICATE OF COMPLIANCE

BP02 1 Each

EXHIBIT BP SEQ BP02

FFP

CERTIFICATION / DATA REPORT

0125 2 Each

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW

FFP

SOCKET FLAT COUNTERSUNK HEAD CAP SCREW ANGLE SELF-

LOCKING, 0.500-13UNRC-3A X 1.500 IN LONG. MFR. IAW FF-S-86H TYPE

IV. NOTE THAT PARA 3.1.4 & PARA. 3.2.5 OF FFS-86H IS IN ERROR.

FASTENERS ARE TO MEET THE REQUIREMENTS OF TABLE X NOT

TABLE VIII. MATERIAL IS NICKEL-COPPER-ALUMINUM ALLOY, QQ-N-

286G, UNS-N05500.

SELF LOCKING IAW MIL-DTL-18240F AMEND 1 TYPE "N". MARKINGS

OF A MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED OR

DEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED ON THE

HEAD OF THE FASTENER (TOP PREFERRED. SIDE LOCATION IF

NECESSARY

FOB: Destination

MILSTRIP: N3904021304011

PURCHASE REQUEST NUMBER: N39040213040110

DATA REQUIREMENTS FOR CLIN 0125

See Exhibit BQ

BQ01 1 Each

EXHIBIT BQ SEQ BQ01

FFP

CERTIFICATE OF COMPLIANCE

BQ02 1 Each

EXHIBIT BQ SEQ BQ02

FFP

CERTIFICATION / DATA REPORT

0127 25 Each

SOCKET HEAD CAP SCREW

FFP

SOCKET HEAD CAP SCREW, 0.500-13UNRC-3A X 1.250 IN. LONG. MFR.

IAW MIL-DTL-1222J TY II MOD. MOD IS HEAT TREAT TO PROVIDE A

MIN. YIELD STRENGTH OF 100KSI AND HEADS TO BE MARKED

"SPECIAL" TO IDENTIFY PURPOSE AS WELL AS OTHER REQUIRED

MARKINGS. MATERIAL IS NICKEL-COPPER-ALUMINUM ALLOY, QQ-N-

286G, UNS-N05500

FOB: Destination

MILSTRIP: N3904021304012

PC NR: 2

PURCHASE REQUEST NUMBER: N3904021304012

DATA REQUIREMENTS FOR CLIN 0127

See Exhibit BR

BR01 1 Each

EXHIBIT BR SEQ BR01

FFP

CERTIFICATE OF COMPLIANCE

BR02 1 Each

EXHIBIT BR SEQ BR02

FFP

CERTIFICATION / DATA REPORT

0129 2 Each

HEX NUT

FFP

HEX NUT 1-1/2-6UNC-2B, MIL-DTL-1222J TYPE-I. MATERIAL SHALL BE

ALLOY STEEL GRADE-5, ZINC COAT IAW ASTM B633-19 TYPE-II, SC-2.

PN: M1222N1X24C20GFNZX

FOB: Destination

MILSTRIP: N3904021924011

PURCHASE REQUEST NUMBER: N39040219240110

DATA REQUIREMENTS FOR CLIN 0129

See Exhibit BS

BS01 1 Each

EXHIBIT BS SEQ BS01

FFP

CERTIFICATE OF COMPLIANCE

BS02 1 Each

EXHIBIT BS SEQ BS02

FFP

CERTIFICATION / DATA REPORT

Section C - Descriptions and Specifications

DLA PROCUREMENT NOTES

C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016) The contractor shall notify the contracting officer immediately upon determining the unavailability of obsolete materials or components. The contractor may recommend a solution to include the impact on the contract price and delivery. The contractor shall not initiate any item redesign or incur any additional costs without the express, written authorization of the contracting officer.

In the event that manufacturing phase-out or discontinuance of production of such items is contemplated, the contractor is required to notify the contracting officer and publish the discontinuance in the Government-Industry Data Exchange Program (GIDEP), where feasible; and to provide immediate advance notice of production phase-out to DLA DMSMS at dscc.dmsms@dla.mil.

C03 Contractor Retention of Supply Chain Traceability Documentation (SEP 2016)

(1) By submitting a quotation or offer, the contractor agrees that, when the contractor is not the manufacturer of the item, it is confirming that it currently has or will obtain before delivery and shall retain documented evidence (supply chain traceability documentation) that the item is from the approved manufacturer and conforms to the technical requirements. The retention period is five years after final payment under this contract.

(2) At a minimum, the supply chain traceability documentation for the item shall include: basic item description, part number and/or national stock number, manufacturing source, manufacturing source’s Commercial and Government Entity (CAGE) code, and clear identification of the name and location of all supply chain intermediaries between the manufacturer to the contractor to item(s) acceptance by the Government. The documentation should also include, where available, the manufacturer's batch identification for the item(s), such as date codes, lot codes, or serial numbers.

(3) Examples of acceptable supply chain traceability documentation can be found at:

http://www.dla.mil/LandandMaritime/Business/Selling/Counterfeit-Detection-Avoidance-Program/

(4) The contractor shall immediately make available documentation upon request of the contracting officer.

The contracting officer determines the acceptability and sufficiency of documentation. If the contractor fails to retain or provide the documentation or the contracting officer finds the documentation to be unacceptable, corrective action may be taken including, but not limited to, cancellation of undelivered orders or rejection of delivered supplies.

C04 Unused Former Government Surplus Property (DEC 2016) To be considered for award, the offeror must complete and submit the following representation with their offer.

Additional supporting documentation to demonstrate the surplus material offered was previously owned by the Government and meets solicitation requirements must be provided within 24 hours of request by the contracting officer.

(1) The material is new, unused, and not of such age or so deteriorated as to impair its usefulness or safety. Yes __ No __ The material conforms to the technical requirements cited in the solicitation (e.g., Commercial and Government Entity (CAGE) Code and part number, specification, etc.). Yes __ No __ The material conforms to the revision letter/number, if any is cited. Yes __ No __ Unknown __ If No, the revision does not affect form, fit, function, or interface. Yes__ No __ Unknown __ The material was manufactured by:

(Name): _ (Address): _

(2) The offeror currently possesses the material Yes __ No __ If yes, the offeror purchased the material from a Government selling agency or other source. Yes __ No __ If yes, provide the following:

Government Selling Agency:

Contract Number:

Contract Date: (Month, Year):

Other Source :

Address :

Date Acquired: (Month/Year):

(3) The material has been altered or modified. Yes __ No __ If Yes, the offeror must provide the name of the company that performed the alteration or modification and attach or forward to the contracting officer a complete description of the alterations or modifications.

(4) The material has been reconditioned. Yes __ No __ If Yes, (i) the price offered includes the cost of reconditioning /refurbishment. Yes __ No __; and (ii) the offeror must provide information on the company that reconditioned the material with the certifications and attach or forward to the contracting officer a complete description of any work done or to be done, including the components to be replaced and the applicable rebuild standard. The material contains cure-dated components. Yes __ No __ If Yes, (i) the price includes replacement of cure-dated components. Yes __ No __; and (ii) provide cure date to the contracting officer.

(5) The material has data plates attached. Yes __ No __ If Yes, the offeror must state below all information contained thereon, or forward a copy or facsimile of the data plate to the contracting officer. ____ _

(6) The offered material is in its original package. Yes __ No __ If yes, the offeror has stated below all original markings and data cited on the package; or has attached or forwarded to the contracting officer a copy or facsimile of original package markings:

Contract Number:

NSN:

CAGE Code:

Part Number:

Other Markings/Data:

(7) The offeror has supplied this same material (National Stock Number) to the Government before. Yes __ No __ If Yes, (i) the material being offered is from the same original Government contract number as that provided previously. Yes __ No __; and (ii) state below the Government Agency and contract number under which the material was previously provided:

Agency:

Contract Number:

(8) The material is manufactured in accordance with a specification or drawing. Yes __ No __ If Yes, (i) the specification/drawing is in the possession of the offeror. Yes __ No __; and (ii) the offeror has stated the applicable information below, or forwarded a copy or facsimile to the contracting officer. Yes __ No __ Specification/Drawing Number:

Revision (if any) :

Date:

(9) The material has been inspected for correct part number and for absence of corrosion or any obvious defects. Yes __ No __ If Yes, (i) material has been re-preserved. Yes __ No __; (ii) material has been repackaged. Yes __ No __;

(iii) percentage of material that has been inspected is %; and/or (iv) number of items inspected is ____ _; and (v) a written report was prepared. Yes __ No __; and if Yes, the offeror has attached the written report or forwarded it to the contracting officer. Yes__ No__ The offeror agrees that in the event of award and notwithstanding the provisions of the solicitation, Inspection and acceptance of the surplus material will be performed at source or destination subject to all applicable provisions for source or destination inspection.

The offeror has attached or forwarded to the contracting officer one of the following, to demonstrate that the material being offered was previously owned by the Government (offeror check which one applies):

___ For national or local sales, conducted by sealed bid, spot bid or auction methods, a solicitation/Invitation For Bid and corresponding DLA Disposition Services Form 1427, Notice of Award, Statement and Release Document.

___ For DLA Disposition Services Commercial Venture (CV) Sales, the shipment receipt/delivery pass document and invoices/receipts used by the original purchaser to resell the material.

___ When the above documents are not available, or if they do not identify the specific NSN being acquired, a copy or facsimile of all original package markings and data, including NSN, commercial and Government entity (CAGE) code and part number, and original contract number. (This information has already been provided in paragraph (c)(6) of this clause. Yes __ No __.)

___ When none of the above are available, other information to demonstrate that the offered material was previously owned by the Government. Describe and/or attach.

This only applies to offers of Government surplus material. Offers of commercial surplus, manufacturer’s overruns, residual inventory resulting from terminated Government contracts, and any other material that meets the technical requirements in the solicitation but was not previously owned by the Government will be evaluated in accordance with the DLAD procurement note L04, Offers for Part Numbered Items.

If requested by the contracting officer, the offeror shall furnish sample units, in the number specified, to the contracting officer or to another location specified by the contracting officer, within 10 days after the contracting officer's request. The samples will be furnished at no cost to the Government. All such samples not destroyed in evaluation will be returned at the offeror's expense. The samples will be evaluated for form, fit, and function with subassembly, assembly, or equipment with which the items are to be used. End items furnished under any contract award to the offeror furnishing the samples can include the returned samples, and all acceptable end items will have a configuration identical to the samples. If specific tests of the samples' performance are made by the Government, the offeror will be furnished the results of such tests prior to a contract being entered into. In addition to any other inspection examinations and tests required by the contract, the performance of the end items will be required to be as good as that of the samples submitted.

In the event of award, the contractor will be responsible for providing material that is in full compliance with all requirements in the contract or order. The surplus material to be furnished must meet the requirements of the current contract or order, whether or not the material met Government requirements in existence at the time the material was initially manufactured or sold to the Government. If higher-level contract quality requirements apply to the material being acquired, those requirements do not apply to surplus material furnished under this contract.

C14 Repackaging or Relabeling to Correct Deficiencies (AUG 2017) The Government may correct packaging or labeling deficiencies if the estimated costs of the corrections are $300 or less ($500 for C&T items). The contracting officer will advise the contractor of the discrepancy and that the Government has completed the repackaging or relabeling. Upon receipt of notice from the contracting officer, the contractor shall reimburse the Government for the costs incurred by the Government to correct the deficiencies.

If the estimated costs of repackaging or relabeling are more than $300 ($500 for C&T), the contracting officer may advise the contractor of the discrepancy and have the material returned to the contractor for correction/resubmittal;

or, if there are urgent requirements, have the Government remediate the discrepancy at the contractor’s expense.

Upon receipt of notice from the contracting officer, the contractor shall reimburse the Government for the costs incurred by the Government to correct the deficiencies.

C20 Vendor Shipment Module (VSM) (AUG 2017)

(1) DLA’s Vendor Shipment Module (VSM) is a web-based system available to DLA contractors for the purpose of obtaining current shipping addresses, two-dimensional bar coded shipping labels in accordance with MIL-STD-129P, bills of lading, packing lists, and other shipping documentation. VSM replaces the need for the contractor to contact the transportation office prior to shipping items. The use of VSM for f.o.b.

destination contracts allows for the printing of labels and can also be used to print labels and arrange for shipping on f.o.b. origin contracts.

(2) To obtain information for contracts administered by DLA or to register as a VSM user, contact the DLA VSM Helpdesk at (800) 456-5507 or via email to delivery@dla.mil.

(a)Prior to contacting the Government that material is ready to ship, the contractor shall complete their VSM profile, to include regular business hours and observed holidays. The Government may request reimbursement for occurrences when the Government sends carrier equipment but is unable to pick-up a shipment due to the material not being available or the contractor being closed.

(3) To obtain information for contracts administered by DCMA, contact the DCMA VSM Helpdesk at

(314) 331-5573 or vsm.shipments@dcma.mil.

CLAUSES INCORPORATED BY FULL TEXT

MERCURY CONTROL (SUPPLIES)

Mercury or mercury…