22Q045A Oil Boom - Combo.pdf

COMBINED SYNOPSIS/SOLICITATION

FA520922Q045A

Oil Containment Boom

1. This is a Combined Synopsis/Solicitation for commercial product prepared in accordance with the format in the Federal Acquisition Regulation (FAR), subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued.

2. The Request for Quotation (RFQ) number FA520922Q045A is issued and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2022-06, DPN 20220623, and Air

Force Acquisition Circular (AFAC) 2022-0502

3. The NAICS is 326299, All Other Rubber Manufacturing. The Small Business Size Standard for this

NAICS code is 500 employees. This acquisition is unrestricted.

4. Requirement Description: The contractor shall provide two oil containment booms in accordance with the attached specifications document.

5. Delivery/Place of Performance: F.O.B. Destination to:

WEB-YND AFSBn-NEA, Japan

ATTN: Site Manager (c/o Mr. Lafollette)

Bldg 500, 1-1 Mizuho-cho, Kanagawa-ku

Yokohama-shi, Kanagawa 221-0034

Japan

(Direct Delivery to Japan via Commercial carrier)

6. Pricing/CLIN Structure: See attached Pricing Schedule

7. Points of contact:

Contract Specialist: A1C Ashla McCammon – ashla.mccammon@us.af.mil

Contracting Officer: Mr. Loren Farnam – loren.farnam@us.af.mil

8. Response Date and time: Quotes must be provided on this form and be signed, dated and submitted by 08 AUG 22, 0730 Japan Standard Time (JST), to both of the points of contact listed above.

9. All companies must be registered in the System for Award Management at https://www.sam.gov/SAM/ to be considered for award. The Government will not provide contract financing for this acquisition. Invoice instruction shall be provided at time of award.

https://www.acquisition.gov/browse/index/far https://www.acq.osd.mil/dpap/dars/change_notices.html https://www.acquisition.gov/affars mailto:ashla.mccammon@us.af.mil mailto:loren.farnam@us.af.mil https://www.sam.gov/SAM/

ATTACHMENTS:

1. Applicable Clauses and Provisions

2. Schedule of Supplies

3. Specifications

ATTACHMENT 1

APPLICABLE CLAUSES AND PROVISIONS

It is the quoter’s responsibility to be familiar with all applicable clauses and provisions. All FAR/

DFARS/AFFARS clauses and provisions may be viewed in full text at https://www.acquisition.gov/content/regulations The following clauses and provisions apply to this acquisition:

CLAUSES INCORPORATED BY REFERENCE

FAR Clauses:

52.204-18 Commercial and Government Entity Code Maintenance Aug 2020

52.212-4 Contract Terms and Conditions – Commercial Products and Commercial Services

Nov 2021

52.225-14 Inconsistency Between English Version and Translation of Contract Feb 2000

52.232-37 Multiple Payment Arrangements May 1999

52.232-40 Providing Accelerated Payments to Small Business Subcontractors Nov 2021

DFARS Clauses:

252.203-7000 Requirements Relating to Compensation of Former DoD Officials Sep 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights Sep 2013

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support May 2016

252.223-7008 Prohibition of Hexavalent Chromium Jun 2013

252.225-7012 Preference for Certain Domestic Commodities Apr 2022

252.225-7021 Trade Agreements Mar 2022

252.225-7041 Correspondence in English Jun 1997

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports Dec 2018

252.232-7010 Levies on Contract Payments Dec 2006

252.244-7000 Subcontracts for Commercial Items Jan 2021

CLAUSES IN FULL-TEXT

Addendum to FAR 52.212-4 Contract Terms and Conditions – Commercial Products and

Commercial Services (Nov 2021).

Para (k) and (w) are only for Japan vendors

(k) Taxes. The text is deleted and replaced as follows:

(1) Unless otherwise provided in this contract, the contract price includes all applicable taxes and duties, except taxes and duties that the Government of the United States and the Government of Japan have agreed shall not be applicable to expenditures in Japan by or on behalf of the United States.

(2) The Status of Forces Agreement between the Japan and the United States and implementing the

Japanese laws authorizes the United States exemption from certain Japanese taxes for materials, supplies, https://www.acquisition.gov/content/regulations equipment and services procured for official purpose in Japan by the United States Armed Forces or by authorized agencies of the United States Armed Forces. Those taxes include (1) Consumption tax, (2)

Gasoline tax and local road tax on gasoline, (3) Diesel oil tax, and (4) Liquefied petroleum gas tax.

(3) The Contractor will submit requests for gasoline or diesel oil tax exemption certificate to the

Contracting Officer. This request will show the actual amount of gasoline or diesel oil used exclusively for the performance of this contract, with documentary evidence and detailed item breakdown to support the accurate consumption of gasoline or diesel oil, or other necessary information and data as may be required. The Contracting Officer will issue to the Contractor a tax exemption certificate for the actual amount of gasoline or diesel oil used exclusively for the performance of this contract.

(w) Conciliation. Except as otherwise provided in this contract, any disagreement arising under this contract which is not resolved by the parties to this contract may be submitted to the United States - Japan

Joint Committee for conciliation in accordance with Paragraph 10, Article XVIII of the Status of Forces

Agreement under Article VI of the Treaty of Mutual Cooperation and Security between Japan and the

United States of America. Requests by the Contractor shall be made in accordance with the following procedures:

(1) In the event the Contractor desires conciliation after the decision of the Contracting Officer has been served upon him, he will first file his appeal from such findings of fact with the appropriate authority in accordance with the clause of this contract entitled, “Disputes” and within the time limits described therein before filing a request for conciliation with the Joint Committee and then request the appellate authority under the “Disputes” clause to suspend its action on his appeal until such time as the

Joint Committee has had an opportunity for effecting conciliation.

(2) The request for conciliation will be submitted by the Contractor through the nearest Defense

Facilities Administration Bureau, to the Contract Conciliation Panel of the Joint Committee. Upon the filing of the request with the Joint Committee, the Contractor will immediately notify the Contracting

Officer in writing that the request for conciliation has been filed.

(3) In the event the disagreement submitted to the Joint Committee under subparagraph (2) above has been resolved through conciliation, it will be the responsibility of the Contractor to notify the appellate authority designated in the clause of this contract entitled, “Disputes”, of the settlement of the dispute and to withdraw his appeal.

(4) In the event the Contractor has submitted a request for conciliation to the Joint Committee under subparagraph (2) above desires, notwithstanding tendency of his request for conciliation, that action by the appropriate authority under the clause of this contract entitled, “Disputes”, be resumed on his appeal, it is his responsibility to so request the said authority in writing. The Joint Committee shall be immediately informed by the Contractor of his action taken hereunder.

(5) No request for conciliation can be submitted to the Joint Committee in the case of a dispute upon which the final decision of the appropriate authority under the clause of this contract entitled, “Disputes”, has been rendered. Pending the hearing of the conciliation panel, the Contractor shall proceed diligently with the performance of the contract in accordance with the Contracting Officer’s decision. The provisions of this clause shall not prejudice any right which the parties to the contract may have to file in a civil suit.

(End of Clause)

FAR 52.212-5 Contract Terms and Conditions Required to Implement Status or Executive Orders

– Commercial Products and Commercial Services (May 2022).

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements

(Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing

Appropriations Act 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts

(and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or

Provided by Kaspersky Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance

Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)

(5) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(6) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-

78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or

Executive orders applicable to acquisitions of commercial items:

(4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020)

(Pub. L. 109-282) (31 U.S.C. 6101 note).

(8) 52.209-6, Protecting the Government’ Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Nov 2021) (31 U.S.C. 6101 note).

(27) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

(28) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Jan 2022) (E.O. 13126).

(29) 52.222-21, Prohibition of Segregated Facilities (Apr 2015)

(30) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

(35) (i) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O.

13627).

(44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving (Jun 2020).

(51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

(58) 52.232-33, Payment by Electronic Funds Transfer— System for Award Management (Oct 2018)

(d) Comptroller General Examination of Record The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is under the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller

General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement.

Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements

(Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing

Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or

Provided by Kaspersky Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115-91).

(iv) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance

Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(v) 52.219-8, Utilization of Small Business Concerns (OCT 2018) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(vi) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

(vii) 52.222-26, Equal Opportunity (SEP 2015) (E.O.11246).

(viii) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

(x) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC

2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xii) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter 67).

(xiii) (A) 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter 78 and E.O

13627).

(B) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for

Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May2014)

(41 U.S.C. chapter 67).

(xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for

Certain Services-Requirements (MAY 2014) (41 U.S.C. chapter 67).

(xvi) 52.222-54, Employment Eligibility Verification (NOV 2021) (E.O. 12989).

(xvii) 52.222-55, Minimum Wages Under Executive Order 13658 (NOV 2020).

(xviii) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

(xix) (A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I (JAN 2017) of 52.224-3.

(xx) 52.225-26, Contractors Performing Private Security Functions Outside the United States (OCT

2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year

2008; 10 U.S.C. 2302 Note).

(xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (JUN

2020) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (NOV 2021) (46

U.S.C. 55305 and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

Alternate I (FEB 2000). As prescribed in 12.301(b)(4)(i), delete paragraph (d) from the basic clause, redesignate paragraph (e) as paragraph (d), and revise the reference to "paragraphs (a), (b), (c), or (d) of this clause" in the redesignated paragraph (d) to read "paragraphs (a), (b), and (c) of this clause".

https://www.acquisition.gov/far/12.301#FAR_12_301

DFARS 252.211-7003 Item Unique Identification and Valuation (Mar 2016).

As prescribed in 211.274-6(a)(1), use the following clause:

ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(a) Definitions. As used in this clause—

“Automatic identification device” means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

“Concatenated unique item identifier” means—

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

“Data matrix” means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200

(ECC200) specification found within International Standards Organization (ISO)/International

Electrotechnical Commission (IEC) 16022.

“Data qualifier” means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

“DoD item unique identification” means a system of marking items delivered to

DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

“Enterprise” means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

“Enterprise identifier” means a code that is uniquely assigned to an enterprise by an issuing agency.

“Government’s unit acquisition cost” means—

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

https://www.acq.osd.mil/dpap/dars/dfars/html/current/211_2.htm#211.274-6 http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery.

“Issuing agency” means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

“Issuing agency code” means a code that designates the registration (or controlling) authority for the enterprise identifier.

“Item” means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

“Lot or batch number” means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

“Machine-readable” means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

“Original part number” means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

“Parent item” means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

“Serial number within the enterprise identifier” means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

“Serial number within the part, lot, or batch number” means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

“Serialization within the enterprise identifier” means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

“Serialization within the part, lot, or batch number” means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

“Type designation” means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

http://www.aimglobal.org/?Reg_Authority15459

“Unique item identifier” means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert “See Schedule” in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number _

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____.

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology – International symbology specification – Data matrix; ECC200 data matrix specification.

http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that—

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International

Standard 15434), in accordance with ISO/IEC International Standard 15418, Information

Technology – EAN/UCC Application Identifiers and Fact Data Identifiers and

Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International

Standard 15434), in accordance with ISO/IEC International Standard 15418, Information

Technology – EAN/UCC Application Identifiers and Fact Data Identifiers and

Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC

International Standard 15434), in accordance with the Air Transport Association

Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology – Transfer Syntax for High Capacity Automatic Data

Capture Media.

(5) Unique item identifier.

(i) The Contractor shall—

(A) Determine whether to—

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle

Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification

Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and

Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code—

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and

Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government’s unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph

(c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow

(WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods—

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or https://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm#252.232-7003 http://dodprocurementtoolbox.com/site/uidregistry/ http://dodprocurementtoolbox.com/site/uidregistry/

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ___, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form

1423.

(g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.

(End of clause)

DFARS 252.232-7006 Wide Area WorkFlow Payment Instructions (Dec 2018).

(a) Definitions. As used in this clause--

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide

Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic

Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based

Training Course and use the Practice Training Site before submitting payment requests through

WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic

Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm#252.232-7003 https://www.sam.gov/ https://wawf.eb.mil/ https://wawf.eb.mil/

COMBO

(2) Fast Pay requests are only permitted when FAR 52.213-1 is included in the contract.

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC HQ0671

Issue By DoDAAC FA5209

Admin DoDAAC FA5209

Ship To Code W91UV3

Service Approver (DoDAAC) W91UV3

Service Acceptor (DoDAAC) W91UV3

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of

DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

252.247-7023 Transportation of Supplies by Sea.(FEB 2019)

Basic. As prescribed in 247.574 (b) and (b)(1), use the following clause:

(a) Definitions. As used in this clause—

“Components” means articles, materials, and supplies incorporated directly into end products at any level of manufacture, fabrication, or assembly by the Contractor or any subcontractor.

“Department of Defense” (DoD) means the Army, Navy, Air Force, Marine Corps, and defense agencies.

“Foreign-flag vessel” means any vessel that is not a U.S.-flag vessel.

“Ocean transportation” means any transportation aboard a ship, vessel, boat, barge, or ferry through international waters.

https://www.acquisition.gov/dfars/part-247-transportation#DFARS-247.574

“Subcontractor” means a supplier, materialman, distributor, or vendor at any level below the prime contractor whose contractual obligation to perform results from, or is conditioned upon, award of the prime contract and who is performing any part of the work or other requirement of the prime contract.

“Supplies” means all property, except land and interests in land, that is clearly identifiable for eventual use by or owned by the DoD at the time of transportation by sea.

(i) An item is clearly identifiable for eventual use by the DoD if, for example, the contract documentation contains a reference to a DoD contract number or a military destination.

(ii) “Supplies” includes (but is not limited to) public works; buildings and facilities; ships; floating equipment and vessels of every character, type, and description, with parts, subassemblies, accessories, and equipment; machine tools; material; equipment; stores of all kinds; end items; construction materials;

and components of the foregoing.

“U.S.-flag vessel” means a vessel of the United States or belonging to the United States, including any vessel registered or having national status under the laws of the United States.

(b)(1) The Contractor shall use U.S.-flag vessels when transporting any supplies by sea under this contract.

(2) A subcontractor transporting supplies by sea under this contract shall use U.S.-flag vessels if—

(i) This contract is a construction contract; or

(ii) The supplies being transported are—

(A) Noncommercial items; or

(B) Commercial items that—

(1)The Contractor is reselling or distributing to the Government without adding value (generally, the

Contractor does not add value to items that it subcontracts for f.o.b. destination shipment);

(2)Are shipped in direct support of U.S. military contingency operations, exercises, or forces deployed in humanitarian or peacekeeping operations; or

(3)Are commissary or exchange cargoes transported outside of the Defense Transportation System in accordance with 10 U.S.C. 2643.

(c) The Contractor and its subcontractors may request that the Contracting Officer authorize shipment in foreign-flag vessels, or designate available U.S.-flag vessels, if the Contractor or a subcontractor believes that—

(1) U.S.-flag vessels are not available for timely shipment;

(2) The freight charges are inordinately excessive or unreasonable; or

(3) Freight charges are higher than charges to private persons for transportation of like goods.

(d) The Contractor must submit any request for use of foreign-flag vessels in writing to the Contracting

Officer at least 45 days prior to the sailing date necessary to meet its delivery schedules. The Contracting

Officer will process requests submitted after such date(s) as expeditiously as possible, but the Contracting

Officer's failure to grant approvals to meet the shipper's sailing date will not of itself constitute a compensable delay under this or any other clause of this contract. Requests shall contain at a minimum—

(1) Type, weight, and cube of cargo;

(2) Required shipping date;

(3) Special handling and discharge requirements;

(4) Loading and discharge points;

(5) Name of shipper and consignee;

(6) Prime contract number; and

(7) A documented description of efforts made to secure U.S.-flag vessels, including points of contact

(with names and telephone numbers) with at least two U.S.-flag carriers contacted. Copies of telephone notes, telegraphic and facsimile message or letters will be sufficient for this purpose.

(e) The Contractor shall, within 30 days after each shipment covered by this clause, provide the

Contracting Officer and the Maritime Administration, Office of Cargo Preference, U.S. Department of

Transportation, 400 Seventh Street SW, Washington, DC 20590, one copy of the rated on board vessel operating carrier's ocean bill of lading, which shall contain the following information:

(1) Prime contract number;

(2) Name of vessel;

(3) Vessel flag of registry;

(4) Date of loading;

(5) Port of loading;

(6) Port of final discharge;

(7) Description of commodity;

(8) Gross weight in pounds and cubic feet if available;

(9) Total ocean freight in U.S. dollars; and

(10) Name of steamship company.

(f) If this contract exceeds the simplified acquisition threshold, the Contractor shall provide with its final invoice under this contract a representation that to the best of its knowledge and belief—

(1) No ocean transportation was used in the performance of this contract;

(2) Ocean transportation was used and only U.S.-flag vessels were used for all ocean shipments under the contract;

(3) Ocean transportation was used, and the Contractor had the written consent of the Contracting Officer for all foreign-flag ocean transportation; or

(4) Ocean transportation was used and some or all of the shipments were made on foreign-flag vessels without the written consent of the Contracting Officer. The Contractor shall describe these shipments in the following format:

ITEM DESCRIPTION CONTRACT LINE ITEMS QUANTITY

TOTAL

(g) If this contract exceeds the simplified acquisition threshold and the final invoice does not include the required representation, the Government will reject and return it to the Contractor as an improper invoice for the purposes of the Prompt Payment clause of this contract. In the event there has been unauthorized use of foreign-flag vessels in the performance of this contract, the Contracting Officer is entitled to equitably adjust the contract, based on the unauthorized use.

(h) If the Contractor indicated in response to the solicitation provision, Representation of Extent of

Transportation by Sea, that it did not anticipate transporting by sea any supplies; however, after the award of this contract, the Contractor learns that supplies will be transported by sea, the Contractor shall—

(1) Notify the Contracting Officer of that fact; and

(2) Comply with all the terms and conditions of this clause.

(i) In the award of subcontracts, for the types of supplies described in paragraph (b)(2) of this clause, including subcontracts for commercial items, the Contractor shall flow down the requirements of this clause as follows:

(1) The Contractor shall insert the substance of this clause, including this paragraph (i), in subcontracts that exceed the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation.

(2) The Contractor shall insert the substance of paragraphs (a) through (e) of this clause, and this paragraph (i), in subcontracts that are at or below the simplified acquisition threshold in part 2 of the

Federal Acquisition Regulation.

(End of clause)

AFFARS 5352.201-9101 Ombudsman (Oct 2019).

(a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern.

(b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB

Circular A-76 competition performance decisions).

(c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman.

AFICC/KH (Chief Enlisted Manager)

25 E Street, Suite B-100

JBPH-H, HI 96853-5427

Phone: (808) 449-8569

FAX: (808) 449-8571

Concerns, issues, disagreements, and recommendations that cannot be resolved at the

Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431.

(d) The ombudsman has no authority to render a decision that binds the agency.

(e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer.

PROVISIONS INCORPORATED BY REFERENCE

FAR Provisions:

52.204-16 Commercial and Government Entity Code Reporting Aug 2020

52.212-1 Instructions to Offerors— Commercial Products and Commercial Services Nov 2021

DFARS Provisions:

252.203-7005 Representation Relating to Compensation of Former DoD Officials Nov 2011

252.204-7008 Compliance with Safeguarding Covered Defense Information Controls Oct 2016

PROVISIONS IN FULL-TEXT

Addendum to 52.212-1 Instructions to Offerors – Commercial Products and Commercial Services

(Nov 2021).

1. Paragraph 52.212-1(c), “Period for Acceptance of Offers,” is tailored as follows: “The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers.”

2. The following is inserted as new paragraph (m) of the provision:

(m) Quotation Preparation Instructions.

(1) To assure timely and equitable evaluation of proposals, quoters must follow the instructions contained herein. Quoters are required to meet all solicitation requirements, including terms and conditions, representations and certifications, and technical requirements, in addition to those identified as evaluation factors or subfactors. Quoters must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale. The response shall consist of two (2) separate parts; Part I - Summary and Miscellaneous Data and

Part II - Price.

(2) Specific Instructions:

PART I – SUMMARY AND MISCELLANEOUS DATA.

(a) Complete the necessary fill-ins and certifications in provisions and in the on-line Representations and Certifications at www.sam.gov. Return the provision FAR 52.212-3, Offeror Representations and Certifications – Commercial Products and Commercial Services, along with the quotation.

For other provisions and clauses in the solicitation, the quoter is required to submit the pages that require a quoter fill-in.

(b) Submit an acknowledgment of the all solicitation amendments, if issued.

(c) If applicable, provide a copy of the letter from the Small Business Administration (SBA) showing proof of Section 8(a) status.

(d) Submit a proof of current Cisco (or equal) Authorized Reseller Registration for validation.

PART II – PRICE.

Insert proposed unit price(s) and extended amount(s) in the Schedule of Supplies for each Contract Line

Item Number (CLIN). The extended amount must equal the unit price multiplied by the number of units.

It is imperative that mathematical calculations are correct; particular care should be taken to ensure the amounts match when using the EXCEL program and the rounding of figures, limited to two decimal places.

(3) Documents submitted in response to this RFQ must be consistent with the following:

(a) Requirements of the solicitation (CLINs) and Government standards. The contractor SHALL specify the quoted item(s), manufacturer, part number, etc that meets the requirements specifications.

(b) FAR 52.212-2, Evaluation – Commercial Products and Commercial Services, of this solicitation.

(c) Submission for the quotation shall be as follows:

(i) Quoters shall submit electronic copies of quotation via e-mail or fax. By submitting an electronic copy, quoters assume all risk of quotations not getting through security measures and firewalls. Only files created using Microsoft WORD, Microsoft EXCEL, and/or Adobe.pdf files will be accepted. No zip files will be accepted. If submitting quotations electronically, email the file(s) by the solicitation closing date and time to the following email addresses: kaori.kanematsu.jp@us.af.mil and franco.cerminara_puello@us.af.mil or FAX 042-551-0973. The Government will confirm receipt of your submission via email reply.

(ii) The following table summarizes the quotation submission:

Par t Title

Electronic

Copy

Paper Copy Page Limit

I Summary and Misc Data

1 N/A N/A

II Price 1 N/A N/A

FAR 52.212-2 Evaluation – Commercial Items (Nov 2021)

(a) The Government will award a contract resulting from this solicitation to the responsible quoter whose quote conforming to the solicitation will provide the best value to the Government, price and other factors considered.

The following factors will be used to evaluate quotes:

(1) Price: The price evaluation will document the fairness and reasonableness of the TEP. The Government reserves the right to perform price realism analysis. If the Government elects to perform a price realism analysis, the Government reserves discretion over the method within which it performs its price realism analysis. If the Government elects to perform a price realism analysis and finds a proposal unrealistic, the Government may withhold award to that quoter.

(End of Addenda)

(b) A written notice of award or acceptance of a quote, mailed or otherwise furnished to the successful quoter within the time for acceptance specified in the quote, will result in a binding contract without further action by either party. Before the quote's specified expiration time, the Government may accept a quote (or part of a

Addendum to FAR 52.212, Evaluation - Commercial Items

The following is inserted as new paragraph (d) of the provision:

(d) Basis for Contract Award: Award will be made to the quote that represents the best value to the Government, price and other factors considered. By submission of its quote IAW the instructions provided in clause FAR 52.212-1, Instructions to Offerors – Commercial Items, the quoter accedes to all solicitation requirements, including terms and conditions and representations and certification. Failure to meet a requirement may result in a quote being determined unacceptable. The Government reserves the right to utilize all, some or none of the CLINS proposed by the contractor.