21-Q-0007_Attachments.pdf

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP TM OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

16. REMARKS

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE Draft

b. COPIES

Final

Reg Repro

15. TOTAL

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page of Pages Adobe Professional 8.0

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

Reset

CONTRACT DATAREQUIREMENTSLIST

A. CONTRACT LINE ITEM NO. B.EXHIBIT C.CATEGORY:

16. REMARKS (Continued)

DD FORM 1423-1, FEB 2001 Page of Pages

DD FORM 1423-1 Blank

DD FORM 1423-1 Blank_2

Untitled

Untitled

1 DATA ITEM NO: A003

2 TITLE OF DATA ITEM: ITEM UNIQUE IDENTIFICATION (IUID) MARKING PLAN

3 SUBTITLE: HOISTING ADDAPTER SET - ENGINE INLET ASSY

4 AUTHORITY Data Acquisition Document No: DI-MGMT-81803A/T

5 CONTRACT REFERENCE:

6 REQUIRING OFFICE: AFLCMC/WLMB (C-17 PM)

7 DD 250 REQ: DD

8 APP CODE: A

9 DIST STATEMENT REQUIRED: D

10 FREQUENCY: See Blk 16

12 DATE OF FIRST SUBMISSION: See Blk 16

11 AS OF DATE: See Blk 16

Text7: 1. After contract award the contractor shall request serial numbers via email from the procuring office program manager. The request shall be made through the program management group email, AFLCMC.WLMB.AFLCMCWLMPSECSE@us.af.mil.

2. The format for the Serial Numbers required to be listed on all ID plates, permanent markings on equipment, and other documents shall be in the format of CAGE-XXXX, where "CAGE" is the Contractor's Commercial and Government Entity code and "XXXX" is a sequential number assigned by the procuring activity. In the event that the technical data package contradicts this format, this CDRL takes precedence.

NOTE: See MIL-STD-130 (current revision as of the date of contract signing) for more information on IUID.

Blk 4:

The DID is tailored as follows:

1. Delete paragraph 3.3.3 in its entirety.

Blk 7:

The Government will accept the Receiving Report for the Marking Plan through WAWF after engineering approval of the draft plan.

Blk 10, 11, 12, 13:

The contractor shall submit the draft Marking Plan in conjunction with the First Article Test Plan (CDRL A001) if an FATP is required. Otherwise, the draft Marking Plan shall be delivered 75 days after contract award.

The Government shall have 60 days to review and approve the initial draft Marking Plan. The contractor shall continue to revise the Marking Plan until the Government Engineer is satisfied that the Marking Plan meets all the necessary requirements. The Final delivery of the Marking Plan shall be submitted within 30 days after government approval.

Cont. on Next Page

G PREPARED BY: Julian Stevenson

AFLCMC/WLE; DSN 468-6745

13 DATE OF SUBSEQUENT SUBMISSION: See Blk 16

H DATE: 29-Apr-20 a ADDRESSEE16 REMARKS: AFLCMC/WLMB (C-17 PM)

Draft16 REMARKS:

Reg16 REMARKS:

Repro16 REMARKS:

a ADDRESSEE16 REMARKS_2: 235 Byron Street, Suite 19A

Draft16 REMARKS_2:

Reg16 REMARKS_2:

Repro16 REMARKS_2:

a ADDRESSEE16 REMARKS_3: Robins AFB, GA 31098

Draft16 REMARKS_3:

Reg16 REMARKS_3:

Repro16 REMARKS_3:

a ADDRESSEE16 REMARKS_4:

Draft16 REMARKS_4:

Reg16 REMARKS_4:

Repro16 REMARKS_4:

a ADDRESSEE16 REMARKS_5: E-copy

Draft16 REMARKS_5:

Reg16 REMARKS_5:

Repro16 REMARKS_5:

a ADDRESSEE16 REMARKS_6: Searchable Adobe PDF

Draft16 REMARKS_6:

Reg16 REMARKS_6:

Repro16 REMARKS_6:

a ADDRESSEE16 REMARKS_7: Email to:

Draft16 REMARKS_7:

Reg16 REMARKS_7:

Repro16 REMARKS_7:

a ADDRESSEE16 REMARKS_8: See Blk 16

Draft16 REMARKS_8: 1

Reg16 REMARKS_8: 1

Repro16 REMARKS_8:

a ADDRESSEE16 REMARKS_9:

Draft16 REMARKS_9:

Reg16 REMARKS_9:

Repro16 REMARKS_9:

a ADDRESSEE16 REMARKS_10: Digital Data

Draft16 REMARKS_10:

Reg16 REMARKS_10:

Repro16 REMARKS_10: 1 a ADDRESSEE16 REMARKS_11:

Draft16 REMARKS_11:

Reg16 REMARKS_11:

Repro16 REMARKS_11:

a ADDRESSEE16 REMARKS_12:

Draft16 REMARKS_12:

Reg16 REMARKS_12:

Repro16 REMARKS_12:

a ADDRESSEE16 REMARKS_13:

Draft16 REMARKS_13:

Reg16 REMARKS_13:

Repro16 REMARKS_13:

a ADDRESSEE16 REMARKS_14:

Draft16 REMARKS_14:

Reg16 REMARKS_14:

Repro16 REMARKS_14:

a ADDRESSEE16 REMARKS_15:

Draft16 REMARKS_15:

Reg16 REMARKS_15:

Repro16 REMARKS_15:

a ADDRESSEE16 REMARKS_16:

Draft16 REMARKS_16:

Reg16 REMARKS_16:

Repro16 REMARKS_16:

a ADDRESSEE16 REMARKS_17:

Draft16 REMARKS_17:

Reg16 REMARKS_17:

Repro16 REMARKS_17:

a ADDRESSEE16 REMARKS_18:

Draft16 REMARKS_18:

Reg16 REMARKS_18:

Repro16 REMARKS_18:

a ADDRESSEE16 REMARKS_19:

Draft16 REMARKS_19:

Reg16 REMARKS_19:

Repro16 REMARKS_19:

a ADDRESSEE16 REMARKS_20:

Draft16 REMARKS_20:

Reg16 REMARKS_20:

Repro16 REMARKS_20:

a ADDRESSEE16 REMARKS_21:

Draft16 REMARKS_21:

Reg16 REMARKS_21:

Repro16 REMARKS_21:

a ADDRESSEE16 REMARKS_22:

Draft16 REMARKS_22:

Reg16 REMARKS_22:

Repro16 REMARKS_22:

a ADDRESSEE16 REMARKS_23:

Draft16 REMARKS_23:

Reg16 REMARKS_23:

Repro16 REMARKS_23:

a ADDRESSEE16 REMARKS_24:

Draft16 REMARKS_24:

Reg16 REMARKS_24:

Repro16 REMARKS_24:

a ADDRESSEE16 REMARKS_25:

Draft16 REMARKS_25:

Reg16 REMARKS_25:

Repro16 REMARKS_25:

a ADDRESSEE16 REMARKS_26:

Draft16 REMARKS_26:

Reg16 REMARKS_26:

Repro16 REMARKS_26:

a ADDRESSEE16 REMARKS_27:

Draft16 REMARKS_27:

Reg16 REMARKS_27:

Repro16 REMARKS_27:

a ADDRESSEE16 REMARKS_28:

Draft16 REMARKS_28:

Reg16 REMARKS_28:

Repro16 REMARKS_28:

a ADDRESSEE16 REMARKS_29:

Draft16 REMARKS_29:

Reg16 REMARKS_29:

Repro16 REMARKS_29:

a ADDRESSEE16 REMARKS_30:

Draft16 REMARKS_30:

Reg16 REMARKS_30:

Repro16 REMARKS_30:

a ADDRESSEE16 REMARKS_31:

Draft16 REMARKS_31:

Reg16 REMARKS_31:

Repro16 REMARKS_31:

a ADDRESSEE16 REMARKS_32:

Draft16 REMARKS_32:

Reg16 REMARKS_32:

Repro16 REMARKS_32:

a ADDRESSEE16 REMARKS_33:

Draft16 REMARKS_33:

Reg16 REMARKS_33:

Repro16 REMARKS_33:

a ADDRESSEE16 REMARKS_34:

Draft16 REMARKS_34:

Reg16 REMARKS_34:

Repro16 REMARKS_34:

a ADDRESSEE16 REMARKS_35:

Draft16 REMARKS_35:

Reg16 REMARKS_35:

Repro16 REMARKS_35:

a ADDRESSEE16 REMARKS_36:

Draft16 REMARKS_36:

Reg16 REMARKS_36:

Repro16 REMARKS_36:

a ADDRESSEE16 REMARKS_37:

Draft16 REMARKS_37:

Reg16 REMARKS_37:

Repro16 REMARKS_37:

a ADDRESSEE16 REMARKS_38:

Draft16 REMARKS_38:

Reg16 REMARKS_38:

Repro16 REMARKS_38:

J DATE:

17 PRICE GROUP:

18 ESTIMATED TOTAL PRICE:

Text1: 1

Text2: 1

Text3: 1

Page: 1 of: 2

A CONTRACT LINE ITEM NO:

B EXHIBIT: A

Check Box9: Off

Check Box10: Off

OTHER: Item Unique Identification (IUID)

D SYSTEMITEM: C-17/PSE/17G230277-1

E CONTRACTPR NO:

F CONTRACTOR:

16 REMARKS Continued: Blk 14:

The draft Marking Plan shall be submitted in single searchable Adobe PDF format and submitted by Email to the following email addresses:

Julian.Stevenson@us.af.mil Anthony.Jones.42@us.af.mil George.Fuchs.CTR@us.af.mil AFLCMC.WLMB.AFLCMCWLMPSECSE@us.af.mil If the Marking Plan file is greater that 15MB in size, the Government will accept delivery through DoD Safe Access File Exchange (SAFE) (https://safe.apps.mil).

Page_2: 2 of_2: 2

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the

DD FORM 1423-1 Blank_2

DD FORM 1423-1 Blank_3

1 DATA ITEM NO: A001

2 TITLE OF DATA ITEM: FIRST ARTICLE TEST/INSPECTION PROCEDURES AND PLAN (FAT/IPP)

4 AUTHORITY Data Acquisition Document No: DI-NDTI-82327/T

Draft16 REMARKS:

Reg16 REMARKS:

Repro16 REMARKS:

Draft16 REMARKS_2:

Reg16 REMARKS_2:

Repro16 REMARKS_2:

Draft16 REMARKS_3:

Reg16 REMARKS_3:

Repro16 REMARKS_3:

Draft16 REMARKS_4:

Reg16 REMARKS_4:

Repro16 REMARKS_4:

Draft16 REMARKS_5:

Reg16 REMARKS_5:

Repro16 REMARKS_5:

Draft16 REMARKS_6: 1

Reg16 REMARKS_6: 1

Repro16 REMARKS_6: 1

Draft16 REMARKS_7:

Reg16 REMARKS_7:

Repro16 REMARKS_7:

Draft16 REMARKS_8:

Reg16 REMARKS_8:

Repro16 REMARKS_8:

Draft16 REMARKS_9:

Reg16 REMARKS_9:

Repro16 REMARKS_9:

Draft16 REMARKS_10:

Reg16 REMARKS_10:

Repro16 REMARKS_10:

Draft16 REMARKS_11:

Reg16 REMARKS_11:

Repro16 REMARKS_11:

Draft16 REMARKS_12:

Reg16 REMARKS_12:

Repro16 REMARKS_12:

Draft16 REMARKS_13:

Reg16 REMARKS_13:

Repro16 REMARKS_13:

Draft16 REMARKS_14:

Reg16 REMARKS_14:

Repro16 REMARKS_14:

Draft16 REMARKS_15: 1

Reg16 REMARKS_15:

Repro16 REMARKS_15:

Draft16 REMARKS_16:

Reg16 REMARKS_16:

Repro16 REMARKS_16:

Draft16 REMARKS_17:

Reg16 REMARKS_17:

Repro16 REMARKS_17:

Draft16 REMARKS_18:

Reg16 REMARKS_18:

Repro16 REMARKS_18:

Draft16 REMARKS_19:

Reg16 REMARKS_19:

Repro16 REMARKS_19:

Draft16 REMARKS_20:

Reg16 REMARKS_20:

Repro16 REMARKS_20:

Draft16 REMARKS_21:

Reg16 REMARKS_21:

Repro16 REMARKS_21:

Draft16 REMARKS_22:

Reg16 REMARKS_22:

Repro16 REMARKS_22:

Draft16 REMARKS_23:

Reg16 REMARKS_23:

Repro16 REMARKS_23:

Draft16 REMARKS_24:

Reg16 REMARKS_24:

Repro16 REMARKS_24:

Draft16 REMARKS_25:

Reg16 REMARKS_25:

Repro16 REMARKS_25:

Draft16 REMARKS_26:

Reg16 REMARKS_26:

Repro16 REMARKS_26:

Draft16 REMARKS_27:

Reg16 REMARKS_27:

Repro16 REMARKS_27:

Draft16 REMARKS_28:

Reg16 REMARKS_28:

Repro16 REMARKS_28:

Draft16 REMARKS_29:

Reg16 REMARKS_29:

Repro16 REMARKS_29:

Draft16 REMARKS_30:

Reg16 REMARKS_30:

Repro16 REMARKS_30:

Draft16 REMARKS_31:

Reg16 REMARKS_31:

Repro16 REMARKS_31:

Draft16 REMARKS_32:

Reg16 REMARKS_32:

Repro16 REMARKS_32:

Draft16 REMARKS_33:

Reg16 REMARKS_33:

Repro16 REMARKS_33:

Draft16 REMARKS_34:

Reg16 REMARKS_34:

Repro16 REMARKS_34:

Draft16 REMARKS_35:

Reg16 REMARKS_35:

Repro16 REMARKS_35:

Draft16 REMARKS_36:

Reg16 REMARKS_36:

Repro16 REMARKS_36:

Draft16 REMARKS_37:

Reg16 REMARKS_37:

Repro16 REMARKS_37:

Draft16 REMARKS_38:

Reg16 REMARKS_38:

Repro16 REMARKS_38:

17 PRICE GROUP:

18 ESTIMATED TOTAL PRICE:

Page: 1 of: 2

1 DATA ITEM NO_2: A002

2 TITLE OF DATA ITEM_2: FIRST ARTICLE TEST/INSPECTION PROCEDURES AND REPORT (FAT/IPR)

4 AUTHORITY Data Acquisition Document No_2: DI-NDTI-82326/T

Draft16 REMARKS_39:

Reg16 REMARKS_39:

Repro16 REMARKS_39:

Draft16 REMARKS_40:

Reg16 REMARKS_40:

Repro16 REMARKS_40:

Draft16 REMARKS_41:

Reg16 REMARKS_41:

Repro16 REMARKS_41:

Draft16 REMARKS_42:

Reg16 REMARKS_42:

Repro16 REMARKS_42:

Draft16 REMARKS_43:

Reg16 REMARKS_43:

Repro16 REMARKS_43:

Draft16 REMARKS_44: 1

Reg16 REMARKS_44: 1

Repro16 REMARKS_44: 1

Draft16 REMARKS_45:

Reg16 REMARKS_45:

Repro16 REMARKS_45:

Draft16 REMARKS_46:

Reg16 REMARKS_46:

Repro16 REMARKS_46:

Draft16 REMARKS_47:

Reg16 REMARKS_47:

Repro16 REMARKS_47:

Draft16 REMARKS_48:

Reg16 REMARKS_48:

Repro16 REMARKS_48:

Draft16 REMARKS_49:

Reg16 REMARKS_49:

Repro16 REMARKS_49:

Draft16 REMARKS_50:

Reg16 REMARKS_50:

Repro16 REMARKS_50:

Draft16 REMARKS_51:

Reg16 REMARKS_51:

Repro16 REMARKS_51:

Draft16 REMARKS_52:

Reg16 REMARKS_52:

Repro16 REMARKS_52:

Draft16 REMARKS_53:

Reg16 REMARKS_53:

Repro16 REMARKS_53:

Draft16 REMARKS_54:

Reg16 REMARKS_54: 1

Repro16 REMARKS_54:

Draft16 REMARKS_55:

Reg16 REMARKS_55:

Repro16 REMARKS_55:

Draft16 REMARKS_56:

Reg16 REMARKS_56:

Repro16 REMARKS_56:

Draft16 REMARKS_57:

Reg16 REMARKS_57:

Repro16 REMARKS_57:

Draft16 REMARKS_58:

Reg16 REMARKS_58:

Repro16 REMARKS_58:

Draft16 REMARKS_59:

Reg16 REMARKS_59:

Repro16 REMARKS_59:

Draft16 REMARKS_60:

Reg16 REMARKS_60:

Repro16 REMARKS_60:

Draft16 REMARKS_61:

Reg16 REMARKS_61:

Repro16 REMARKS_61:

Draft16 REMARKS_62:

Reg16 REMARKS_62:

Repro16 REMARKS_62:

Draft16 REMARKS_63:

Reg16 REMARKS_63:

Repro16 REMARKS_63:

Draft16 REMARKS_64:

Reg16 REMARKS_64:

Repro16 REMARKS_64:

Draft16 REMARKS_65:

Reg16 REMARKS_65:

Repro16 REMARKS_65:

Draft16 REMARKS_66:

Reg16 REMARKS_66:

Repro16 REMARKS_66:

Draft16 REMARKS_67:

Reg16 REMARKS_67:

Repro16 REMARKS_67:

Draft16 REMARKS_68:

Reg16 REMARKS_68:

Repro16 REMARKS_68:

Draft16 REMARKS_69:

Reg16 REMARKS_69:

Repro16 REMARKS_69:

Draft16 REMARKS_70:

Reg16 REMARKS_70:

Repro16 REMARKS_70:

Draft16 REMARKS_71:

Reg16 REMARKS_71:

Repro16 REMARKS_71:

Draft16 REMARKS_72:

Reg16 REMARKS_72:

Repro16 REMARKS_72:

Draft16 REMARKS_73:

Reg16 REMARKS_73:

Repro16 REMARKS_73:

Draft16 REMARKS_74:

Reg16 REMARKS_74:

Repro16 REMARKS_74:

Draft16 REMARKS_75:

Reg16 REMARKS_75:

Repro16 REMARKS_75:

Draft16 REMARKS_76:

Reg16 REMARKS_76:

Repro16 REMARKS_76:

17 PRICE GROUP_2:

18 ESTIMATED TOTAL PRICE_2:

Page_3: 1 of_3: 2

A CONTRACT LINE ITEM NO:

B EXHIBIT: A

OTHER:

D SYSTEMITEM: C17/PSE/17G230277-1

E CONTRACTPR NO:

F CONTRACTOR:

A CONTRACT LINE ITEM NO_3:

B EXHIBIT_2: A

G PREPARED BY: Julian Stevenson

AFLCMC/WLE; DSN 468-6745

H DATE: 31-Aug-20

J DATE:

3 SUBTITLE: HOISTING ADDAPTER SET - ENGINE INLET ASSY

6 REQUIRING OFFICE: AFLCMC/WLE (C-17 Engr)

5 CONTRACT REFERENCE:

7 DD 250 REQ: DD

8 APP CODE: A

9 DIST STATEMENT REQUIRED: D

10 FREQUENCY: See Blk 16

11 AS OF DATE: See Blk 16

12 DATE OF FIRST SUBMISSION: See Blk 16

13 DATE OF SUBSEQUENT SUBMISSION: See Blk 16

Text1: 2

Text2: 1

Text3: 1 a ADDRESSEE16 REMARKS: AFLCMC/WLE (C17 Eng) a ADDRESSEE16 REMARKS_38:

a ADDRESSEE16 REMARKS_2: 235 Byron Street, Suite 19A a ADDRESSEE16 REMARKS_3: Robins AFB, GA 31098 a ADDRESSEE16 REMARKS_4:

a ADDRESSEE16 REMARKS_5: E-copy a ADDRESSEE16 REMARKS_6: Searchable Adobe PDF a ADDRESSEE16 REMARKS_7: Email to:

a ADDRESSEE16 REMARKS_8: See block 16 a ADDRESSEE16 REMARKS_9:

a ADDRESSEE16 REMARKS_10:

a ADDRESSEE16 REMARKS_11:

a ADDRESSEE16 REMARKS_12:

a ADDRESSEE16 REMARKS_13:

a ADDRESSEE16 REMARKS_14:

a ADDRESSEE16 REMARKS_15: DoD SAFE (as necessary) a ADDRESSEE16 REMARKS_16: The PCO a ADDRESSEE16 REMARKS_17:

a ADDRESSEE16 REMARKS_18:

a ADDRESSEE16 REMARKS_19:

a ADDRESSEE16 REMARKS_20:

a ADDRESSEE16 REMARKS_21:

a ADDRESSEE16 REMARKS_22:

a ADDRESSEE16 REMARKS_23:

a ADDRESSEE16 REMARKS_24:

a ADDRESSEE16 REMARKS_25:

a ADDRESSEE16 REMARKS_26:

a ADDRESSEE16 REMARKS_27:

a ADDRESSEE16 REMARKS_28:

a ADDRESSEE16 REMARKS_29:

a ADDRESSEE16 REMARKS_30:

a ADDRESSEE16 REMARKS_31:

a ADDRESSEE16 REMARKS_32:

a ADDRESSEE16 REMARKS_33:

a ADDRESSEE16 REMARKS_34:

a ADDRESSEE16 REMARKS_35:

a ADDRESSEE16 REMARKS_36:

a ADDRESSEE16 REMARKS_37:

Text4: 1

Text5: 2

Text6: 1

Text7: The DID shall be tailored as follows:

1. Delete 3.1.f(4)

2. In paragraph 3.8 delete the phrase "software version".

Blk 7:

The Government will accept the Receiving Report through WAWF upon final delivery.

Blk 8:

The FAT/IPP will be approved by C-17 SPO Support Equipment Engineering (Ref MIL-HDBK-831, paragraph 4.1.4.2).

Blk 10, 11, 12, 13:

The contractor shall submit an initial draft FAT/IPP 60 DAC. The Government engineer shall have 60 days to review the initial draft FAT/IPP. The contractor shall continue to revise the FAT/IPP until the Government engineer is satisfied that the FAT/IPP meets all the necessary requirements of this CDRL. After the Government approves the draft FAT/IPP and notifies the PCO and contractor through email communication, the contractor shall submit the invoice in WAWF for Government final approval of the FAT/IPP.

Blk 14;

The FAT/IPP shall be submitted in a singe, searchable Adobe PDF file and submitted by Email. If the FAT/IPP is greater that 15MB in size, the Government will accept delivery through DoD Safe Access File Exchange (SAFE) (https://safe.apps.mil) to the PCO.

NOTE: Any changes to the FAT/IPP after approval must be coordinated with the technical authority approving the plan. All coordinating actions shall be processed through the contracting officer in accordance with (IAW) contracting regulations and public law.

The draft FAT/IPP shall be submitted to the PCO and the following email addresses:

Julian.Stevenson@us.af.mil Anthony.Jones.42@us.af.mil George.Fuchs.CTR@us.af.mil AFLCMC.WLMB.AFLCMCWLMPSECSE@us.af.mil

Text8:

The DID shall be tailored as follows:

1. Delete 3.1.f(4)

2. In paragraph 3.7 delete the phrase "software version".

Blk 7:

The Government will accept the Receiving Report through WAWF upon final delivery of the FAT/IPR.

Blk 8:

The FAT/IPR will be approved by C-17 SPO Support Equipment Engineering (Ref MIL-HDBK-831, paragraph 4.1.4.2).

Blk 10, 11, 12, 13:

The contractor shall submit an initial draft FAT/IPR in accordance with the contracted schedule. The Government engineer shall have 60 days to review the initial draft FAT/IPR. The contractor shall continue to revise the FAT/IPR until the Government engineer is satisfied that the FAT/IPR meets all the necessary requirements agreed to in the contract. After the Government approves the draft FAT/IPR and notifies the PCO through email communication, the PCO will contact the contractor and the contractor shall submit the invoice in WAWF for Government final approval of the FAT/IPR invoice. The contractor shall not ship the FA until after the FAT/IPR is approved.

Blk 14:

The FAT/IPR shall be submitted in a singe, searchable Adobe PDF file and submitted by Email. If the FAT/IPR is greater that 15MB in size, the Government will accept delivery through DoD Safe Access File Exchange (SAFE) (https://safe.apps.mil) to the PCO.

The draft FAT/IPR shall be submitted to the PCO and the following email addresses:

Julian.Stevenson@us.af.mil Anthony.Jones.42@us.af.mil George.Fuchs.CTR@us.af.mil AFLCMC.WLMB.AFLCMCWLMPSECSE@us.af.mil

Check Box9: Yes

Check Box10: Off

ENGINEERING DATA LIST

DATE:

18 NOV 2020

REVISION: 2 *HISTORY*

CAGE:

88277

PAGE:

NSN:

1730014560084BA

DATA TECH:

Olson, Eric C

END ITEM:

C-17 AIRCRAFT

ORGANIZATION/OFFICE SYMBOL:

429 SCMS GUMACB/

MANUFACTURER NAME:

BOEING COMPANY, THE

REFERENCE NUMBER:

17G230277-1

NOUN:

ADAPTER SET,GROUND

LINE/

SUB CAGE

ENG DRAWING NUM/ ACCOMP

DOC NUM REV

NR

SHEETS

FURN

CODE

DIST

CODE NOUN REMARKS

L 88277 17G230277 & ECO H S D ADAPTER SET,HOISTING -

ENGINE INLET ASSEMBLY

Olson, Eric C 18 NOV 2020

-1

ECO 3004C0001-R & 2004C0002-R

NAME: DATE:

L 88277 17G230277 (NL) H S D NOTES LIST Olson, Eric C 18 NOV 2020

L 88277 17G230277 (PL) & ECO H S D PARTS LIST Olson, Eric C 18 NOV 2020

ECO 2004C0001-R

L 88277 17G001002 A S D PLATE, RECORD, PROOF TEST Olson, Eric C 18 NOV 2020

-501

L 88277 17G001002 (NL) & ECO A S D NOTES LIST Olson, Eric C 18 NOV 2020

ECO 2007C0001-R

L 88277 17G001002 (MY) A S D MASTER ARTWORK Olson, Eric C 18 NOV 2020

MYLAR

L 88277 17G001002 (PL) A S D PARTS LIST Olson, Eric C 18 NOV 2020

L 88277 17G001003 B S D PLATE, IDENTIFICATION Olson, Eric C 18 NOV 2020

L 88277 17G001003(NL) & ECO B S D NOTES LIST Olson, Eric C 18 NOV 2020

L 88277 17G001003-1 (MY) B S C MASTER ARTWORK Olson, Eric C 18 NOV 2020

MYLAR

L 88277 17G001003 (PL) B S D PARTS LIST Olson, Eric C 18 NOV 2020

L 88277 17G001005 C S D PLATE, BARCODE Olson, Eric C 18 NOV 2020

C - CLASSIFIED DOCUMENT.

S - FURNISHED WITH SOLICITATION.

M - STABLE BASE DRAWING REQUIRED; FURNISHED WITH

CONTRACT AWARD.

X - DATA SUPPLIED (NOT IN JEDMICS).

R - FURNISHED BY PCO UPON REQUEST.

P - PARTIAL DOCUMENT FURNISHED.

V - VENDOR DRAWING; (NOT PROVIDED).

G - GOV'T DOCUMENT.

O - OTHERS, CONTRACTOR MUST ACQUIRE.

A- DATA NOT AVAILABLE.

FURNISHED METHOD CODE LEGEND:

Page 1 of 4EDL Version 2Generated by PRPS using Jasper Reports on 19 Nov 2020

L 88277 17G001005 (NL) & ECO C S D NOTES LIST Olson, Eric C 18 NOV 2020

L 88277 17G001005 (PL) C S D PARTS LIST Olson, Eric C 18 NOV 2020

L 88277 13D0021 E S D WASHER Olson, Eric C 18 NOV 2020

-052

L 88277 DPS1.001 J S D INDEX OF SUPPLEMENTAL

DPSs

L 88277 DPS1.07-27 F S D CEMENTING NEOPRENE

RUBBER

L 88277 DPS1.07-55 AL S D CEMENTING PLASTIC FOAMS

L 88277 DPS1.34-30 F S D HEAT SHRINKABLE

INSULATING MATERIALS-

MILITARY

L 88277 DPS11.04 W S D HARD ANODIZING ALUMINUM

L 88277 DPS2.50 (NOT REQ) SEALING, MATERIALS AND

METHODS

NOT REQ USE 2.50-17 FOR C-17/GOV/MIL

L 88277 DPS2.50-17 P S D SEALING, MATERIALS AND

METHODS, C-17 AIRCRAFT

L 88277 DPS2.70-2 (NOT REQ) ASSEMBLY SHOP PRACTICE,

COMMERCIAL

NOT REQ USE 2.70-2.1 AND 2.70-2-17 FOR C-17

L 88277 DPS2.70-2.1 N S D ASSEMBLY SHOP PRACTICE,

OVERSIZE FASTENER INSTALL

L 88277 DPS2.70-2-17 AD S D ASSSEMBLY SHOP PRACTICE,

MILITARY AIRCRAFT

L 88277 DPS3.02-17 R S D IDENTIFICATION OF PARTS

AND ASSEMBLIES - MILITARY

L 88277 DPS3.08 & ECO BH S D SWAGED CABLE ASSEMBLIES Olson, Eric C 18 NOV 2020

ECO 2005C0001-R

L 88277 DPS3.27-1 U S D MARKING METHODS AND

MATERIALS, INK STAMPING

Page 2 of 4EDL Version 2Generated by PRPS using Jasper Reports on 19 Nov 2020

L 88277 DPS3.307 (NOT REQ) CORROSION INHIBITING

COMPOUNDS

NOT REQ USE 3.307-17 FOR C-17/GOV/MIL

L 88277 DPS3.307-17 A S D CORROSION INHIBITING

COMPOUNDS, MILITARY

AIRCRAFT

L 88277 DPS3.57 T S D RUBBER IDENTIFICATION AND

PACKAGING

L 88277 DPS4.025 W S D DISSIMILAR MATERIALS

PROTECTION

L 88277 DPS4.50-165 (NOT REQ) ALIPHATIC POLYURETHANE

COATING DMS2115

NOT REQ USE 4.50-165-17 FOR C-17

L 88277 DPS4.50-165-17 F S D POLYURETHANE COATING

DMS2115

L 88277 DMS2115 H S D COATING POLYURETHANE

L 88277 DPS4.710 M S D MINIMUM FABRICATION

PRACTICES FOR METALS

L 88277 DPS9.07 AN S D SURFACE TREATMENT OF

CORROSION RESISTANT

STEELS

L 88277 DMS1674 G S D LABELS,ETCHED,ANODIZED,D

YED,PHOTOIMAGED

ALUMINUM

L 88277 DPS3.02 (NOT REQ) S IDENTIFICATION OF PARTS

AND ASSEMBLIES

NOT REQ USE 3.02-17 FOR C-17/GOV/MIL

L 88277 DPS9.60 M S D FABRICATION OF PHOTO

EDGED METAL MARKINGS

L 88277 DPS4.710-1 K S D EDGE CONDITION

REQUIREMENTS

L 98752 200415485 E S A GENERAL ENGINEERING

NOTES

APPLICABLE NOTES ARE 1, 3, 4, 12

STANDARD ENGINEERING TEXT

FOR GENERAL ENGINEERING DOCUMENT NOTES, SEE DOCUMENT NUMBER 200415485.

Page 3 of 4EDL Version 2Generated by PRPS using Jasper Reports on 19 Nov 2020

Page 4 of 4EDL Version 2Generated by PRPS using Jasper Reports on 19 Nov 2020

PACKAGING REQUIREMENTS

(X)(X)(X)(A/B)(X)(#)

MIL-STD-2073-1

PRES

SPECIAL

PACKAGING

INSTRUCTION

NUMBER

COMMERCIAL

ASTM D3951 MIL-STD-129

MARKINGPACKPACKPRES

QUP

ITEM ID

PR, MIPR, OR DOCUMENT

U C L

T

D

1000TH

O P

I1010 WHOLE CUBEDEPTHWIDTH10LENGTH10

UNIT PACK CUBEUNIT PACK SIZEUNIT PACK WEIGHT

SPEC

MKG

INT

CONT

UNIT

CONT

CUSH

DUNN

WRAP

MTL

MTL

METH

ICQQUP

QUANTITY

Page 1 of 2 PagesPREVIOUS EDITIONS ARE OBSOLETE

DATEPACKAGING SPECIALIST SIGNATUREPACKAGING SPECIALIST (Typed Name)

AFMC FORM 158, 20150424

ORGANIZATION

4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1

2. ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS (Specify all revisions and dates or required specifications)

E. WOOD PACKAGING MATERIAL ISPM 15

D. MARKING OF WARRANTED ITEMS, ITEM NAME(S)

C. PACKAGING DATA (Coded and/or Special Packaging Instructions)

B. PACKAGING OF HAZARDOUS MATERIALS

A. ENGINEERED OR SPECIALIZED CONTAINERS (CDRS)

3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for applicable item(s) as indicated below:

SEE REVERSE FOR SPECIFIC INSTRUCTIONS:

1. PACKING REQUIREMENTS: Block 1 shall always be completed and may be further defined in Blocks 2, 3, or 4. The term “Item ID” refers to line item number, item name, NSN/MMAC, or any other way of identifying a particular item. MIL-STD-2073-1 represents Military Preservation (PRES) and Packing (PACK). Military packing consists of levels A and B. ASTM D3951 may be substituted by another document if specified in Block 2. Quantity Per Unit (QUP) is abbreviated.

ADDITIONAL INFORMATION

Page 2 of 2 PagesAFMC FORM 158, 20150424

ID 1: 1730-01-456-0084

SPI 1:

ID 2:

SPI 2:

ID 3:

SPI 3:

ID 4:

SPI 4:

ID 5:

SPI 5:

ID 6:

SPI 6:

ID 7:

SPI 7:

ID 8:

SPI 8:

ID 9:

SPI 9:

ID 10:

SPI 10:

3:

Text1:

Text2:

Text3:

Text4:

Text5: SEE BLOCK 2 ON REVERSE SIDE

CB1: Off

PR: (FD2060-21-30032)

2:

Text: SEE BLOCK 2 ON REVERSE SIDE

4:

text 1:

QUP 1:

QUP 2:

QUP 3:

icq 1:

icq 2:

icq 3:

PM1:

PM2:

CD1:

PMTL 1:

PMTL 2:

WR1:

WR2:

CDUNN:

CD2:

CT1:

UC1:

UC2:

IC1:

IC2:

UCL1:

UPW 1:

UPW 2:

UPW 3:

UPW 4:

UPW 5:

L 1:

L 2:

L 3:

L 4:

W 1:

W 2:

W 3:

W 4:

D 1:

D 2:

D 3:

D 4:

WC 1:

WC 2:

WC 3:

WC 4:

1000 1:

1000 2:

1000 3:

OPI 1:

CB1: Off

SM 1:

SM 2:

5:

text 1:

QUP 2:

QUP 3:

icq 1:

icq 2:

icq 3:

PM1:

PM2:

CD1:

PMTL 1:

PMTL 2:

WR1:

WR2:

CDUNN:

CD2:

CT1:

UC1:

UC2:

IC1:

IC2:

UCL1:

UPW 1:

UPW 2:

UPW 3:

UPW 4:

UPW 5:

L 1:

L 2:

L 3:

L 4:

W 1:

W 2:

W 3:

W 4:

D 1:

D 2:

D 3:

D 4:

WC 1:

WC 2:

WC 3:

WC 4:

1000 1:

1000 2:

1000 3:

OPI 1:

QUP 1:

CB1: Off

SM 1:

SM 2:

6:

text 1:

QUP 1:

QUP 2:

QUP 3:

icq 1:

icq 2:

icq 3:

PM1:

PM2:

CD1:

PMTL 1:

PMTL 2:

WR1:

WR2:

CDUNN:

CD2:

CT1:

UC1:

UC2:

IC1:

IC2:

UCL1:

UPW 1:

UPW 2:

UPW 3:

UPW 4:

UPW 5:

L 1:

L 2:

L 3:

L 4:

W 1:

W 2:

W 3:

W 4:

D 1:

D 2:

D 3:

D 4:

WC 1:

WC 2:

WC 3:

WC 4:

1000 1:

1000 2:

1000 3:

OPI 1:

CB1: Off

SM 1:

SM 2:

7:

text 1:

QUP 1:

QUP 2:

QUP 3:

icq 1:

icq 2:

icq 3:

PM1:

PM2:

CD1:

PMTL 1:

PMTL 2:

WR1:

WR2:

CDUNN:

CD2:

CT1:

UC1:

UC2:

IC1:

IC2:

UCL1:

UPW 1:

UPW 2:

UPW 3:

UPW 4:

UPW 5:

L 1:

L 2:

L 3:

L 4:

W 1:

W 2:

W 3:

W 4:

D 1:

D 2:

D 3:

D 4:

WC 1:

WC 2:

WC 3:

WC 4:

1000 1:

1000 2:

1000 3:

OPI 1:

CB1: Yes

SM 1:

SM 2:

8:

text 1:

QUP 1:

QUP 2:

QUP 3:

icq 1:

icq 2:

icq 3:

PM1:

PM2:

CD1:

PMTL 1:

PMTL 2:

WR1:

WR2:

CDUNN:

CD2:

CT1:

UC1:

UC2:

IC1:

IC2:

UCL1:

UPW 1:

UPW 2:

UPW 3:

UPW 4:

UPW 5:

L 1:

L 2:

L 3:

L 4:

W 1:

W 2:

W 3:

W 4:

D 1:

D 2:

D 3:

D 4:

WC 1:

WC 2:

WC 3:

WC 4:

1000 1:

1000 2:

1000 3:

OPI 1:

SM 1:

SM 2:

9:

text 1:

QUP 1:

QUP 2:

QUP 3:

icq 1:

icq 2:

icq 3:

PM1:

PM2:

CD1:

PMTL 1:

PMTL 2:

WR1:

WR2:

CDUNN:

CD2:

CT1:

UC1:

UC2:

IC1:

IC2:

UCL1:

UPW 1:

UPW 2:

UPW 3:

UPW 4:

UPW 5:

L 1:

L 2:

L 3:

L 4:

W 1:

W 2:

W 3:

W 4:

D 1:

D 2:

D 3:

D 4:

WC 1:

WC 2:

WC 3:

WC 4:

1000 1:

1000 2:

1000 3:

OPI 1:

SM 1:

SM 2:

10:

text 1:

QUP 1:

QUP 2:

QUP 3:

icq 1:

icq 2:

icq 3:

PM1:

PM2:

CD1:

PMTL 1:

PMTL 2:

WR1:

WR2:

CDUNN:

CD2:

CT1:

UC1:

UC2:

IC1:

IC2:

UCL1:

UPW 1:

UPW 2:

UPW 3:

UPW 4:

UPW 5:

L 1:

L 2:

L 3:

L 4:

W 1:

W 2:

W 3:

W 4:

D 1:

D 2:

D 3:

D 4:

WC 1:

WC 2:

WC 3:

WC 4:

1000 1:

1000 2:

1000 3:

OPI 1:

SM 1:

SM 2:

11:

text 1:

QUP 1:

QUP 2:

QUP 3:

icq 1:

icq 2:

icq 3:

PM1:

PM2:

CD1:

PMTL 1:

PMTL 2:

WR1:

WR2:

CDUNN:

CD2:

CT1:

UC1:

UC2:

IC1:

IC2:

UCL1:

SM 1:

SM 2:

UPW 1:

UPW 2:

UPW 3:

UPW 4:

UPW 5:

L 1:

L 2:

L 3:

L 4:

W 1:

W 2:

W 3:

W 4:

D 1:

D 2:

D 3:

D 4:

WC 1:

WC 2:

WC 3:

WC 4:

1000 1:

1000 2:

1000 3:

OPI 1:

12:

UPW 1:

UPW 2:

UPW 3:

UPW 4:

UPW 5:

L 1:

L 2:

L 3:

L 4:

W 1:

W 2:

W 3:

W 4:

D 1:

D 2:

D 3:

D 4:

WC 1:

WC 2:

WC 3:

WC 4:

1000 1:

1000 2:

OPI 1:

text 1:

QUP 1:

QUP 2:

QUP 3:

icq 1:

icq 2:

icq 3:

PM1:

PM2:

CD1:

PMTL 1:

PMTL 2:

WR1:

WR2:

CDUNN:

CD2:

CT1:

UC1:

UC2:

IC1:

IC2:

UCL1:

SM 1:

SM 2:

121:

1000 3:

13:

text 1:

QUP 1:

QUP 2:

QUP 3:

icq 1:

icq 2:

icq 3:

PM1:

PM2:

CD1:

PMTL 1:

PMTL 2:

WR1:

WR2:

CDUNN:

CD2:

CT1:

UC1:

UC2:

IC1:

IC2:

UCL1:

UPW 1:

UPW 2:

UPW 3:

UPW 4:

UPW 5:

L 1:

L 2:

L 3:

L 4:

W 1:

W 2:

W 3:

W 4:

D 1:

D 2:

D 3:

D 4:

WC 1:

WC 2:

WC 3:

WC 4:

1000 1:

1000 2:

OPI 1:

SM 1:

SM 2:

131:

1000 3:

Organization: 406 SCMS/GULAA

PS Name: [Cedric Williams/DSN 497-3490]

2020-12-16T06:57:41-0500

WILLIAMS.CEDRIC.E.JR.1031600630

Date: Dec 16, 2020

Add Info: SHIPPING CONTAINERS SHALL BE MARKED MEETING THE FOLLOWING CRITERIA: (A) MIL-STD-129, STANDARD PRACTICE FOR MILITARY MARKING. (B) ADDITIONAL MARKING AND/OR BAR CODING REQUIREMENTS EXCEEDING THOSE OF MIL-STD-129 (E.G., UNIT SERIAL NUMBERS, ORIGINAL EQUIPMENT MANUFACTURERS (OEM) NAME, OR OEM MODEL NUMBER, AS SPECIFIED PN THE AFMC FORM 158.

MILITARY PACKAGING AND MARKING - ITEMS SHALL BE PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1E, STANDARD PRACTICE FOR MILITARY PACKAGING. SHIPPING AND STORAGE MARKINGS SHALL BE IN ACCORDANCE WITH MIL-STD-129R, STANDARD PRACTICE FOR MILITARY MARKING.

FOR REPAIRS - WHEN SHIPPING CONTAINERS ARE RECEIVED THAT MEET THE REQUIREMENTS OF THE AFMC FORM 158 AND ARE SUITABLE FOR RETURN SHIPMENT OF SERVICEABLES ASSETS, THEY SHALL BE RECLAIMED, STORED AND PROTECTED FOR REUSE. UNSERVICEABLE CONTAINERS SHALL BE DISPOSED OF AND REPLACED WITH NEW CONTAINERS BY THE CONTRACTOR THAT MEET THE REQUIREMENTS OF THE AFMC FORM 158.

PACKAGING AND MARKING OF HAZARDOUS MATERIAL - HAZARDOUS MATERIALS SHALL BE PREPARED FOR SHIPMENT IN ACCORDANCE WITH THE FOLLOWING APPLICABLE REGULATIONS FOR THE INDIVIDUAL SHIPMENT HAZARD, ULTIMATE DESTINATION, AND MODE OF TRANSPORTATION: (a) CODE OF FEDERAL REGULATIONS (CFR) TITLE 29, PART 1910.1200; (b) CODE OF FEDERAL REGUALTIONS (CFR) TITLE 49; (c) AIR FORCE MANUAL (AFMAN) 24-204_IP, PREPARING HAZARDOUS MATERIALS FOR MILITARY AIR SHIPMENT; (d) INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO) TECHNICAL INSTRUCTIONS FOR THE SAFE TRANSPORT OF DANGEROUS GOODS BY AIR; AND (e) INTERNATIONAL MARITIME DANGEROUS GOODS (IMDG) CODE.

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO HEAT TREATED (HT) MATERIAL (HT 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (LATEST REVISION OF ISPM NO.15) AND DOD 4140.01-M-1 COMPLIANCE FOR DEFENSE PACKAGING: PHYTOSANITARY REQUIREMENTS FOR WOOD PACKAGING MATERIAL (WPM) OFFICE. THIS INFORMATION CAN BE FOUND AT WWW.IPPC.INT.

QUP 1: 1

QUP 2:

QUP 3:

QUP 4:

QUP 5:

QUP 6:

QUP 7:

QUP 8:

QUP 9:

QUP 10:

MP 1: X

MP 2:

MP 3:

MP 4:

MP 5:

MP 6:

MP 7:

MP 8:

MP 9:

MP 10:

PK 1: B

PK 2:

PK 3:

PK 4:

PK 5:

PK 6:

PK 7:

PK 8:

PK 9:

PK 10:

MA 1: X

MA 2:

MA 3:

MA 4:

MA 5:

MA 6:

MA 7:

MA 8:

MA 9:

MA 10:

CP 1:

CP 2:

CP 3:

CP 4:

CP 5:

CP 6:

CP 7:

CP 8:

CP 9:

CP 10:

CPK 1:

CPK 2:

CPK 3:

CPK 4:

CPK 5:

CPK 6:

CPK 7:

CPK 8:

CPK 9:

CPK 10:

DDFORM 1653 APR 1999 (PREVIOUS EDITIONS ARE OBSOLETE) 406 SCMS/GUMA OVERPRINT

TRANSPORTATION DATA FOR SOLICITATIONS

(USE REVERSE FOR ADDITIONAL REMARKS)

1. PR. PO or MIPR NUMBER 2. DATE (PR PREPARED)

3. COMMODITY

NMFC: DATA/FIRST ARTICLE: FOB DESTINATION

4. STOCK NUMBER

5. F.O.B. TERMS RECOMMENDED AS BEST SUITED FOR THIS PROCUREMENT (X ONE OR MORE)

A. ORIGIN C. OTHER – (DESTINATION APOE/WPOE)

B. DESTINATION

6. TRANSPORTATION PROVISIONS / CLAUSES (X APPROPRIATE BLOCKS) 7. FAR CITATION

a.

b. REPORT OF SHIPMENT (REPSHIP)(FEB 2006) 52.247-68

c. COMMERCIAL BILL OF LADING NOTATIONS(FEB 2006) 52.247-1

d. F.O.B. ORIGIN (FEB 2006) 52.247-29

e. F.O.B. ORIGIN WITH DIFFERENTIALS (FEB 2006) 52.247-33

f. F.O.B. DESTINATION (NOV 1991) 52.247-34

g. F.O.B. ORIGIN AND/OR DESTINATION EVALUATION (APR 1984) 52.247-45

h. SHIPPING POINT (S) USED IN EVALUATION OF F.O.B. ORIGIN OFFERS (APR 1984) 52.247-46

i. EVALUATION – F.O.B. ORIGIN (JUN 2003) 52.247-47

j. F.O.B. DESTINATION – EVIDENCE OF SHIPMENT (FEB 1999) 52.247-48

k. DESTINATION – UNKNOWN (APR 1984) 52.247-49

l. NO EVALUATION OF TRANSPORTATION COSTS (APR 1984) 52.247-50

m. EVALUATION OF EXPORT OFFERS (JAN 2001) 52.247-51

n. CLEARANCE AND DOCUMENTATION REQUIREMENTS-SHIPMENTS TO DOD AIR OR WATER

TERMINAL TRANSSHIPMENT POINTS (FEB 2006)

52.247-52

o. FREIGHT CLASSIFICATION DESCRIPTION (APR 1984) IAW CONTRACT 52.247-53

p. F.OB. POINT FOR FMS SHIPMENTS ORIGINATING OUTSIDE THE U.S. (FMS) (JUL 1997) See CONTINUATION

q. F.O.B. POINT OF DELIVERY OF GOVERNMENT – FURNISHED PROPERTY (JUN 2003) 52.247-55

r. TRANSIT ARRANGEMENTS (APR 1984) 52.247-56

s. TRANSPORTATION TRANSIT PRIVILEGE CREDITS (APR 1984) 52.247-57

t. LOADING, BLOCKING, AND BRACING OF FREIGHT CARS (APR 1984) 52.247-58

u. F.O.B. ORIGIN – CARLOAD AND TRUCKLOAD SHIPMENTS (APR 1984) 52.247-59

v. GUARANTEED SHIPPING CHARACTERISTICS (DEC 1989) 52.247-60

w. F.O.B. ORIGIN – MINIMUM SIZE OF SHIPMENTS (APR 1984) 52.247-61

x. MARKING OF SHIPMENTS

y. F.O.B. ORIGIN – PREPAID FREIGHT (FEB 2006), * SEE 6Z BELOW 52.247-32

8. EVALUATION OF PORT BIDS OR PROPOSAL (Ports and combined handling and transportation charges per measurement ton used by the Government for evaluation purposes).

a. DESTINATION COUNTRIES b. ORIGIN PORTS (Air or Water)

BAYONNE NJ

NORFOLK VA

CONCORD CA

SEATTLE WA

6Z. NOTE TO CONTRACTOR: CONTACT CTO IF PROBLEMS ARISE. SHIP DOOR-TO-DOOR COMMERCIAL EXPRESS CARRIER SERVICE FOR MOVEMENT OF MICAP AND PROJECT CODES (TP-1 AND TP-2/RDD 777): 122, 123,700, 780 (WITH RESTRICTIONS), 879, 880, 9FF, 9FV, 9FX, 9GF, 9GJ, 9GV, 9GS, 9GD, SURGE and 720.

(X) SEE REVERSE

a. TYPED OR PRINTED NAME (Last, First, Middle) b. SIGNATURE c. DATE (YYYYMMDD)

PR:

DD FORM 1653: ADDITIONAL TRANSPORTATION DATA FROM: 406 SCMS/GULAA

1. REMARKS

A. FOREIGN MILITARY SALES:

(1) NOTE TO CONTRACTOR: FOREIGN MILITARY SALES: 10-15 DAYS PRIOR TO

SHIPMENT, CONTACT THE DCMA/ ACO TRANSPORTATION OFFICE FOR SHIPPING

ADDRESS / INSTRUCTIONS.

(2) FOR REPAIR & RETURN FMS: ALL INBOUND SHIPPING DOCUMENTS MUST BE

MAINTAINED FOR USE IN OUTBOUND SHIPPING.

(3) EVIDENCE OF SHIPMENT (FMS) FOREIGN MILITARY SALES

B. CLASSIFIED MATERIAL: TRANSPORTATION MUST BE BY CARRIERS THAT PROVIDE DOD

CONSTANT SURVEILLANCE SERVICE (DOD CSS) IAW DOD 4500.9-R.

C. SHIPPING INSTRUCTIONS (See Page 3)

D. SAME AS BASIC PR WITH NOTED CHANGES

E. BASIC CONTRACT NUMBER

F. F.O.B. POINT FOR U.S. SHIPMENTS ORIGINATING OUTSIDE THE CONTINENTAL U.S. (SEE

CONTINUATION)

G. 52.247-38 – F.O.B. – INLAND CARRIER, POINT OF EXPORTATION. (FEB 2006)

H. NOTE TO CONTRACTOR: PRIOR TO SHIPPING, Contractor must contact the DCMA

Transportation Officer for the current aerial or water point of embarkation (APOE/WPOE) and assistance with required export documentations.

I. NOTE TO CONTRACTOR: PRIOR TO SHIPPING, Contractor must contact the DCMA Transportation Officer for assistance with required export documentations.

J. NOTE TO BUYER: IF NECESSARY TO DEVIATE FROM THIS DOCUMENT, CONSOLIDATE WITH

ANOTHER PR, MIPR, SI, ASI OR ANTICIPATE AWARD TO OVERSEAS ORIGIN POINT REQUEST

YOU RECOORDINATE WITH 406 SCMS/GUMA FOR INCLUSION OF ADDITIONAL FAR CLAUSES

OR CHANGES TO OUR ORIGINAL RECOMMENDATIONS.

2. ESTIMATED SHIPPING CHARACTERISTICS:

3. TRANSPORTATION APPROPRIATION CHARGEABLE:

4. FAST TRANSPORTATION

(a) Domestic shipments – use door-to-door carriers for all shipments regardless of weight.

(b) Export shipments – use Worldwide Express (WWX) for all shipments of 0-300 pounds.

Contact The Cognizant Transportation Officer (CTO) if commercial services are not available.

(c) Foreign Military Sales (FMS) shipments are excluded from these requirements.

5. NOTE TO BUYER: FOR TRANSPORTATION BID EVALUATION PURPOSES: IF DIFFERENCE

BETWEEN BIDDERS EXCEEDS , TRANSPORTATION COST WILL NOT BE A

DETERMINING FACTOR IN CONTRACT AWARD.

6. TRANSPORTATION RECOMMENDATIONS TO BE CITED ON FUTURE PR COORDINATION.

Beverly Brown, Supervisor Transportation & Packaging (406 SCMS/GULAA) Mission Support Section (10/14/2015)

PR:

SHIP TO:

2 DATE PR PREPARED: 2020-12-08

4 STOCK NUMBER:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow1: X

7 FAR CITATIONa:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow2:

b REPORT OF SHIPMENT REPSHIPFEB 2006:

5224768:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow3:

c COMMERCIAL BILL OF LADING NOTATIONSFEB 2006:

522471:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow4:

d FOB ORIGIN FEB 2006:

5224729:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow5:

e FOB ORIGIN WITH DIFFERENTIALS FEB 2006:

5224733:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow6: X f FOB DESTINATION NOV 1991:

5224734:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow7:

g FOB ORIGIN ANDOR DESTINATION EVALUATION APR 1984:

5224745:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow8:

5224746:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow9:

i EVALUATION FOB ORIGIN JUN 2003:

5224747:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow10:

j FOB DESTINATION EVIDENCE OF SHIPMENT FEB 1999:

5224748:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow11:

k DESTINATION UNKNOWN APR 1984:

5224749:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow12:

l NO EVALUATION OF TRANSPORTATION COSTS APR 1984:

5224750:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow13:

m EVALUATION OF EXPORT OFFERS JAN 2001:

5224751:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow14:

5224752:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow15: X

5224753:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow16:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow17:

5224755:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow18:

r TRANSIT ARRANGEMENTS APR 1984:

5224756:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow19:

s TRANSPORTATION TRANSIT PRIVILEGE CREDITS APR 1984:

5224757:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow20:

5224758:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow21:

5224759:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow22:

v GUARANTEED SHIPPING CHARACTERISTICS DEC 1989:

5224760:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow23:

w FOB ORIGIN MINIMUM SIZE OF SHIPMENTS APR 1984:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow24:

5224761x MARKING OF SHIPMENTS:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow25:

y FOB ORIGIN PREPAID FREIGHT FEB 2006 SEE 6Z BELOW:

5224732:

b ORIGIN PORTS Air or Water:

a DESTINATION COUNTRIESRow1:

BAYONNE NJ:

a DESTINATION COUNTRIESRow2:

NORFOLK VA:

a DESTINATION COUNTRIESRow3:

CONCORD CA:

a DESTINATION COUNTRIESRow4:

SEATTLE WA:

c DATE YYYYMMDD: 2020-12-16

1 PR PO or MIPR NUMBER: WLM-4871661 FD20602130032

5C: Off

5B: Yes

5A: Off

3: Yes

6A: SUPPORT EQUIP/PLANNING PR

2020-12-16T07:22:46-0500

LANGFORD-SCOTT.DOROTHY.A.1114134674

Dropdown6: [LANGFORD-SCOTT, DOROTHY A]

TACS: []

CONTRACT:

NOTE 5:

SHIPPING: [WT: , DIM: ]

1A1: Off

NOTE: Off

TRANS: Off

4C: Off

4B: Off

4A: Off

TAC: Off

ESTIMATE: Off

B: Off

C: Yes

D: Off

E: Off

F: Off

G: Off

H: Off

I: Off

J: Yes

1A2: Off

1A3: Off

SHIP TO 1: EY1746 THE BOEING COMPANY

XPO LOGISTICS CP 210 945 9312

927 BILLY MITCHELL RD STE 105

SAN ANTONIO TX 78226

SHIP TO 2:

SHIP TO 3: