Questions and Answers.pdf
PDF 35 KB Posted
- Attached to
- 3-Roll Plate Benders Federal contract opportunity
- Solicitation number
- 2031ZA20Q00080
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment C_75D-07.0-06 EHS Requirements for Large Equipment Purchases.pdf | ||
| Attachment A_Plate Bender Statement of Work.pdf | ||
| 2031ZA20Q00080.pdf | ||
| Attachment B_75D-07.0-04 EHS Contractor Requirements.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Question 1: Would a urethane coating on the rolls be OK?
Answer: The hardness for this coating is 65A. This is a little softer than what we are looking for, but acceptable
Question 2: Under § 3.0 Scope you give the yield strength of the material as 2880 N. Do you mean 288 N/mm²?
Answer: 2880 N/mm2
Question 3: What is the minimum radius required?
Answer: The smallest radius we form is 7.5”
Question 4: Would a machine size of 57” L x 27” W x 43” H be OK?
Answer: Yes
File details come from the government source that posted it. Updated .