Attachment_B_-_Technical_Requirements_Data_Sheet.pdf

TRDS Currency Pallets Rev. 5/01/2018

Request for Quote 2031ZA18Q00332 Page 1 of 1

Technical Requirements Data Sheet (TRDS)

Currency Pallets

General Requirements:

Pallet shall conform to dimensional requirements set forth in BEP drawing 55229BB.

Pallet shall be designed to accommodate 4-way fork truck and 4-way pallet jack entry.

Total pallet weight shall not exceed 50 pounds.

Pallet shall be identified with the manufacturer's name, date of manufacture, and material.

The pallet shall be manufactured without mechanical fasteners.

Pallet surface shall maintain a minimum 0.25 static coefficient of friction for cardboard boxes.

Pallet shall be designed to operate between the temperatures of -20°F and +140°F.

Pallet shall be easily cleanable on a regular basis by manual or mechanical methods with mild detergent at 140°F without loss of pallet performance.

All external surfaces of the pallet shall be free from sharp edges, burrs and mold flash.

No additional feet shall be added to the pallet.

The bottom surface of the pallet deck may be ribbed if clearance levels are maintained.

Material Requirements:

Pallet shall be black in color.

Pallet shall be plastic.

Pallet shall be made out of at least 30% recycled materials.

Pallet shall be recyclable by the manufacturer.

A metal insert may be used.

Pallet shall not contain hazardous waste as defined in 40 C.F.R. §261.

Materials used in pallet manufacture shall not contribute to product damage.

Pallet should not absorb odors from spills or surroundings.

Performance Requirements:

Pallets shall support a minimum static load of 5,000 pounds, a minimum dynamic load of

3,300 pounds, and a minimum racking load of 1,650 pounds.

The pallet shall not have deflection greater than 0.5" in a constant unsupported 32" span at rated load after creep time of 6 months.

Pallet shall have notches to locate and protect mechanical strapping.

Pallet shall partially nest for secure transport in stacks.