20200206-TECH ORDER DATA.pdf

MATERIAL ORDERING DATA

MIL-DTL-22050

IDN: N4523A 2020-0206

ICN: 38VNG53407 KO: F08 KOI: 100

Paragraph 6.2 Acquisition Requirements

MIL-DTL-22050F, GASKET AND PACKING MATERIAL, RUBBER, FOR USE WITH POLAR

FLUIDS, STEAM, AND AIR AT MODERATELY HIGH TEMPERATURES, dated 13 MAY 2019.

1. Grade of material required (see 1.2): Grade 2 - Nominal 80

2. Sizes specified for material (see 3.1): 2 sheets of 48" x 48" x 1/8"

3. O-ring PIN: N/A Dimensions: N/A Tolerances: N/A

4. Requirement for prohibited materials verification (see 3.7.2 and 4.4.2). No additional requirements.

3.7.2 Prohibited materials. The gasket and packing material shall not contain any chemicals categorized as “prohibited” in accordance with T9070-AL-DPC-020/077-2.

5. If the manufacturer is unable to provide a product that complies with 3.8 (i.e., if the gasket and packing material contain a hazardous material), then the manufacturer should provide information detailing proper disposal of the gasket and packing material in compliance with 40 CFR 261. Yes

6. Off-gassing evaluation methods, if other than specified (see 3.9 and 6.7): N/A

7. AQL of 1.0 (see 4.1.2): Yes

8. Requirements for an HHA (see 4.4.1 and 6.6): Yes

9. Additional fire testing provisions (see 4.6 and 6.8): No additional fire testing required

10. Requirements for fire gas toxicity (see 3.10, 4.7, and 6.9): Yes

11. Packaging requirements (see 5.1 and 6.10): Yes

12. Contracting officers require copies of completed Safety Data Sheets prepared in accordance with FED-STD-313. FAR clause 52.223-3 must be in the contract.

Additional Data Requirements: N/A Prepared By: Joshua Desmond Code: 250.1