2020_PhaseIV_Goldiedivide_SOW_FY20_finalSOW.docx

C.1 General and Site-Specific Specifications

This is a request for quote from the contractors eligible to receive awards for Forestry contractors and/or National Hazardous Fuels Reduction IDIQ for cut, pile, as well as lop and scatter. Prices for the following bid items should be based on the Description provided below. Please use this Statement of Work to assist with quotes.

There is good public access to project area/s and no pre-bid meeting is scheduled, but a site visits maybe requested if there is enough interest from potential bidders. Bidders are highly encouraged to visit the project area prior to bid submission and base all quotes on site specific conditions and this prescription.

Access to the area is limited to existing established roads, or as directed by the Contracting Officer's Representative (COR). Access must be when dry or frozen; The Contractor at his expense will repair ruts and road damage caused by the Contractor. The Government assumes no obligation to plow snow or perform special maintenance to keep roads open. All garbage must be removed from the work sites. Overnight work camp is allowed on BLM managed lands, contractor must approve location with COR and abide by all fire restrictions and/or camping restrictions and follow leave no trace guidelines once camp is vacated

Public access is available to all units and contractor must be aware of property lines by a Avenza or onyx like app to make sure crew footprint remains on public lands.

Also, this area does receive significant snowpack and reduced access from January to April/May maybe limited to tracked UTVs/ or ATV off county-maintained roads. BLM assumes no responsibility for trespass or access issues under this Statement of work.

Contractor is expected to utilize Avenza or Georeferenced mapping programs to utilize georeferenced PDF maps and/or shape files of which government will provide for the bidding and completing of project at request.

Currently project is set-up for virtual boundary for all non-property line boundaries. For non-property line boundaries, it is expected of contractor to be utilizing Avenza, or other reliable GPS georeferenced maps programs to bid, and complete project to specifications and PDF maps given by government. However, if physical delineation is required by contractor, with a couple weeks’ notice government will then delineate boundary with Blue-White stripe and Pink Flagging based on contract maps. If contractor needs any lines reworked or re-delineated please notify NFO staff as far ahead as possible so fieldwork can be scheduled.

Lop and scatter all Juniper, all sizes. All slash in this unit must be completely severed from stump and must be cut down below 24” in height when fell upon ground.

Cut, Pile For all cut pile units, any Boles over 6” diameter will not be piled, instead contractor will delimb and severe portion of bole <6” diameter. All limbs and boles <6” dia. Will be piled. Delimbed Boles >6” diameter will be scattered away from piles randomly.

Only Ponderosa Pine and Juniper are to be cut under this project, no hardwoods or shrubs will be cut.

For Units 9 thru 11, and 13; Cut/Pile Cut all Juniper up to 16” DBH.

Cut, pile all Ponderosa Pine <8” DBH that are within 15’ of the bole (trunk) of a >8” DBH Ponderosa Pine. Where no >8” DBH exists, thin <8” DBH Pine trees to 15’ x 15’ spacing.

**Please be aware that there are small peripheral areas of cut, pile, units where there is not enough material to create piles. Where there are small residual amounts of slash from single trees on open peripheral areas of cut, pile units. Contractor may lop and scatter if there is not enough material in a 60’ radius of stump to construct a pile to specifications. In these peripheral areas slash must be under 24” height.

When selecting leave trees for 15’ x 15’ spacing, select the largest, healthiest, best crowns, the trees will have the following characteristics:

· No apparent damage to the main bole.

· Not chlorotic (crown fading).

· Demonstrates good vigor and is disease/bug free, and of good form.

· Has at least 40% percent Live crown ratio.

All standing dead that is <8” shall also be cut and piled to specs mentioned herein for cut/piled units.

All standing dead all sizes shall be cut in lop and scatter units.

Stump heights shall be cut flat (no punji sticks) and no more than 4” height on uphill side.

Slash and Piling spec’s

· Pile all cut material.

· Piled material must be cut to 6-foot lengths or less and De-limbed as needed to build compact piles. No voids should be present in piles.

· Piles should be constructed outside dripline (crown extent/edge) of leave trees.

· Pile size minimum 8’x8’-8’ to maximum 20’x20’-12’.

· Piles will be located 20’ from the property lines.

· The piles must be a minimum of 8 feet high by 8 feet wide by 8 feet long and constructed in a “haystack” or “tepee” style:

1. Start with the larger diameters (4-6 inches). The first 2 or 3 pieces will lay flat and all others should be piled like a haystack or tepee.

2. Stems up and needles towards the ground.

3. Place smaller material on the pile last (less than 4 inches).

4. Piles should be compact with few holes.

5. No ends should stick out abruptly from the pile.

6. Piles will be dirt free.

· Some areas may require exceptions to distance, or minimum and maximum slash pile sizes. The project inspector or COR must pre-approve and give written permission.

Contract Time - The number of calendar days allowed in the contract for completion of the contract work.

Leave Trees - Any tree that is selected or required to be left standing as provided in the specifications.

Over story Tree- Leave/reserve tree Ponderosa pine.

DBH- Diameter at breast height.

Dripline- Extent of over story trees canopy circumference, where rain would drop out of canopy “dripline”.

Slash - Any cut vegetation.

Spacing – The horizontal distance from the trunk of one leave tree to the trunk of the next nearest leave tree.

C.2 Inspection and Acceptance Bureau of Land Management, High Plains District, Wyoming Field Office: Newcastle Date: June 4, 2020

Basis of Payment - After inspection of completed acreage, the Contracting Officer or designated representative will calculate the pay rate.

The pay rate will be calculated by multiplying the inspection percentage times the contract unit price per acre. When the percent of satisfactory thinning is 90 percent or greater, payment will be made at the contract unit price.

Maps begin on next page Bureau of Land Management, High Plains District, Wyoming Field Office: Newcastle Date: June 4, 2020 image1.png image2.jpg image3.jpg