SOW_Statement_of_Requirements.doc

Statement of Work

Department of Homeland Security

Customs and Border Protection (CBP)

U.S. Border Patrol (USBP)

Special Operations Group (SOG)

BORSTAR Roll-Out Kit

1.0 Introduction

This Statement of Work (SOW) defines the requirements of the Department of Homeland Security (DHS), U. S. Customs and Border Protection (CBP), U.S. Border Patrol (USBP) in acquiring a custom gear roll out bag for new members of the U.S. Border Patrol Search, Trauma and Rescue (BORSTAR) Team.

A. Background

CBP provides BORSTAR certified Border Patrol Agents with highly specialized tactical medicine, land navigation, technical rescue, air operations, and search and rescue training. Upon successful completion of the BORSTAR Selection and Training Course (BSTC), BORSTAR issues all graduating members a standardized Roll-Out Kit. This Roll-Out Kit provides BORSTAR personnel with a base line of required items for use in conducting missions and assures maximum level of Officer Safety required in their line of work. The BORSTAR Roll-Out Kit is put together through extensive research and field use. The BORSTAR Roll-Out Kit has evolved based on improvements in technology and operational requirements.

B. Scope It is the intent of CBP to procure eighteen (18) sets of the custom build gear roll out bags, to equip U.S. Border Patrol Agents certified as BORSTAR Agents. In addition, the scope includes full replacement warranty and customer support necessary to account for the delivery and tracking of all roll-out bags purchased.

2.0 General Requirements

The vendor shall complete the following tasks as required to comply with this SOW.

3.0 Deliverables

In order for the vendor to be determined technically acceptable, the products proposed must meet all minimum specifications listed below.

The BORSTAR Roll-Out Kit must have the following items. The items will be exact match only.

· CRYE, Jumpable Plate Carrier (JPC) – (BLC-042-02-LG0)(multi-cam) The JPC is a lightweight and minimal vest designed for mobility, weight savings, and packability. At just over one pound for the entire carrier, the JPC offers a variety of configuration options to suit an operator’s needs in terms of load carriage and comfort. It features the new AirLite cummerbund system with an integrated attachment system that allows pouches to be mounted on both the inside and outside of the cummerbund, shedding unnecessary weight and bulk while improving ventilation. It also features integrated admin and magazine pouches on the front of the carrier.

· CRYE, JPC Side Plate Pouch Set – (BLC-044-02-000)(multi-cam) A must for the incorporation of side plates to the Jumpable Plate Carrier (JPC). It attaches directly to the front plate bag or can be woven onto the AirLite cummerbund. Stretches to fit contents. Left and right pouch included.

· SAFARILAND, ALS Tactical Holster w/Quick Release and Accessories – (6305-1972-131-MS30, black) Automatic locking system secures weapon once holstered, includes hood assembly and hood guard, simple straight up draw once all releases are deactivated, double leg strap and leg shroud with mounting holes for accessories. Accessories

· Molle Accy Mount (6004-16-2-MS22, black)

· Belt Loop w/Screw (745BL-2-MS22, black)

· Leg Shroud SML (6009-110-2-MS22, black)

· TYR TACTICAL, Communications Pouch for Motorola XTS – (TYR-CM025, multi-cam) Attaches upright with MOLLE and secures radio with double loop bungee cord. Includes two hook & loop tabs for securing microphone cords or antennas. We created this item utilizing our revolutionary PV® material for durability and weight reduction.

· HIGH SPEED GEAR, Double Decker Taco-Molle – (11DD00MC) The Double Decker TACO® combines a modular rifle mag pouch and a modular pistol mag pouch into one secure unit. This unique pouch can securely hold an infinite combination of mags and other accessories. The original TACO® forms the base and USGI, HK, PMAG, ARC, FAL, AK 30/ 40, LR20 and M14 magazines are all held securely and deployed easily and silently on demand. Both Taco pouches are made of Cordura, an injection molded polymer and shock-cord. The pouches both maintain a positive, adjustable grip of the mag and do not require any other securing systems unless desired. Webbing tabs are sewn in on the top for use of "over the top" bungee retainers (not included). Additional loop Velcro® is sewn in the inside of the rifle pouch if the user wishes to utilize adhesive backed hook Velcro on his magazine body for added security.

· ITW FASTMAG GEN III 5.56, Coyote Brown (2) – (00617-CB) The FastMag™ GEN.III accommodates most 5.56mm/.223 ammunition magazines. It reduces reloading cycle time for the operator and can be mounted in the up or down direction (operator’s preference). The system eliminates the need for traditional top closures, while providing a secure point of access. The enhanced urethane tension strap is adjustable to meet the users preference for removal tension. The mounting slots on the front allow operators to ‘double-stack’ FastMags™ (FastMag™ GEN.III or FastMag™ Pistol) or attach nylon accessory pouches using MALICE® Clips, giving even more options for your kit setup.

· High Speed Gear, Handcuff Taco-Covered-Molle – (18DC00, multi-cam) This covered handcuff pouch will hold almost any brand or style of handcuffs, including oversized cuffs. Also ideal for field compasses, tins and other similarly shaped items.

· ITW FASTMAG PISTOL, Coyote Brown, No Tabs (2) – (717) The FastMag™ Pistol [FMP] is built from the same hi-strength, GhillieTEX™ IR reducing, anti-fragmentation polymer as the original FastMag™. Our new FMP reduces reloading time for the operator and can be mounted in the up or down position. This system eliminates the need for traditional top closures, while providing a secure point of access. The enhanced urethane tension strap is adjustable to meet the users preference for removal tension. The FMP is also designed to 'double-stack' on all FastMag™ Gen III & FastMag™ Heavy..

· TYR TACTICAL, General Purpose Pouch 6” by 6” – (TYR-GP066, multi-cam) A general purpose pouch that attaches upright with Molle.

· HSGI EXTENDED PISTOL TACO, Multicam (Holds Baton)– (11EX00MC) Most high capacity pistol and sub gun magazines are held securely. Flap adjusts to fit multiple length items. Deployed easily and silently on demand.

Also fits large flashlights, collapsible batons and other survival equipment

Attaches to PALS with our HSGI clip, included.

· TYR TACTICAL, Medical Pouch-General Purpose – (TYR-MD004, multi-cam) The medical pouch a full surround zipper for easy access to supplies. Interior features multiple elastic retention straps and a bottom drain hole.

· STREAMLIGHT TLR-1 HL, Handgun/Long Gun Weaponlight – (69260) A high efficiency LED that generates 800 lumens of brilliant white light. Needs to have C4 LED technology, impervious to shock with a 50,000 hour lifetime. Will be powered by two 3-volt CR123 lithium batteries and run for 1.75 hours on two batteries. Must mount directly to handguns with Glock-style rails and to all MIL-STD-1913 (Picatinny) rails. Must fit existing light bearing holsters compatible with TLR-1 lights.

· TEAM WENDY EXFIL LTP, Bump Helmet – (72-31, and 72-32, size dependent) Lightweight, tactical, polymer bump helmet with built in NVG shroud made from integrated Wilcox machined aluminum shroud insert. Helmet must also have Zorbium foam liner along with a CAM FIT retention system with micro adjustable dial. Must also include picatinni style rails for accessories.

· TEAM WENDY HELMET COVER, Multicam- (71-MHC-MC)-Designed for use with Team Wendy’s EXFIL Carbon and LTP helmets. Made from polyester, easy installation and removal via hook/loop, close fit that creates a secure fit to the shell. Multi-cam pattern only.

· TYR Tactical Gunfighter Belt-E, Rigger Style,- (TYR-GFB114-E, multi-cam) features a 2” Cobra® Buckle and one hard sewn point for either rappelling or a safety lanyard. Its base is constructed with high strength 1.75” Type 13 webbing. The exterior is surrounded by 2 rows of 1/2” MOLLE webbing providing a capability like no other belt available. The removable Antimicrobial/FR treated padded spacer mesh is used on the interior of the belt for comfort.

· 215 GEAR, Ultimate Rigger’s Belt – (URBK, khaki) The belt is constructed with double layered 1 ¾ inch parachute webbing and the entire belt is 7 Class sewn throughout. A rust free aluminum Cobra buckle with a sewn in attachment point. Made with high quality Mil-Spec materials.

· TRU-SPEC PARKA H20 PROOF, Gen II, Multicam – (2026) Three layer windproof, waterproof, breathable jacket to keep you dry and comfortable. Must includeBemis seam tape, sleeve pockets that allow for sewn-on patches, adjustable sleeve cuffs, zippered openings in underarm for ventilation, drawstring waist with cord lock, Dintex inner lining.

· TRU-SPEC H20 PROOF ECWCS TROUSERS, Multicam – (2045) Three layer waterproof, windproof, breathable pants. Must include drawstring waist with cord lock, Dintex inner lining, Bemis taped seams, zipper fly with snap button, two pass-through pockets, reinforced knees, zipper leg openings with hook and loop ankle adjustments.

· WILEY X, GAG-1 FR Glove Wiley X – (G232LA, Foliage green) Close quarter battle (CQB), and Military Operations on Urban Terrain (MOUT), working in and around heavy equipment and vehicles. Military Kevlar® brand fiber blend: 96% Kevlar® (for cut resistance), 4% anti-static fiber (for safety around fuels, explosives and electronics). FlexCut™ index finger designprovides maximum dexterity and flexibility without material build-up in trigger. Hard knuckle protection reinforced with Kevlar® is built into glove, not placed on top, providing better fit and greater comfort. Accordion Panel conforms to hand and flexes with every movement. Palm padding provides vibration protection. Digitally textured leather palm, fingers and back of fingertips provide durability and a good grip in all conditions of use. Perspiration / moisture resistance: Tanning technology keeps leather soft and supple for the life of the glove even after repeated exposure to perspiration or moisture. Abrasion resistance: Leather is treated to provide increased durability. Concealed interior seam stitching using para-aramid thread enhances durability especially around vulnerable fingertips. Gloves will not lose grip or fit when wet or submersed in water and will stay soft even with repeated exposure to salt water.

· SNUGPAK, Tactical Series 2 Sleeping – (91142, Olive) The Tactical Series 2 sleeping bag has water resistant Paratex Steelplate outer shell and with a luxurious TS1™ (Thermal Suede) lining. Enhanced with a proprietary space age Reflectatherm material, the Tactical Series of sleeping bags with Reflectatherm could add at least 15% additional warmth by reflecting the user’s body heat enhancing the performance of the bag. Zipper compartment in the hood of the bag opens to a pillow pocket which is designed to accommodate the Snuggy Headrest pillow or some type of clothing in its place to act as a pillow.

· SNUGPAK, Patrol Pancho – (92285) The Patrol Poncho is a simple over the head, waterproof, smock style piece of useful kit that everyone should have. Designed to be worn over the user as well as the users backpack, if one is being utilized, to help keep you and your gear dry in a down pour. Its generously cut design can allow one to use as an emergency Bivvi if needed. Adjustable hood and thumb loops. Chest has a Velcro map pocket with storm flap. Made out of Snugpak’s exclusive Paratex Dry material and with fully taped seams which allows the shell to be 100% waterproof.

· IDEAL SUPPLY TBT TORCH LIGHTER – (3258) Windproof triple jet torch flame utilizing refillable butane gas.

· STEINER, Predator Pro Binoculars – (Steiner 2441) Exclusive high-contrast coating, 100% waterproof, auto-focus, compact model. Features Steiner's exclusive Color Adjusted Transmission (CAT) lens coating that enhances brown and red colors against foliated backgrounds, making subjects "pop" from green foliated backgrounds. Includes an eyepiece rain guard and regular neck strap. Waterproof to 15 ft. Rubber armoring also has been re-engineered so it emits almost no noise during handling. The softer, quieter rubber is also more tactile in wet weather, and the forest green color blends with most camo patterns. With 18.5mm eye relief and soft, fold-down eyecups, eyeglass wearers will have no difficulty whether they choose to wear their glasses or not. Have strong aluminum housings with a specially designed, rugged armor covering that ensures a firm grip, and large center focus knob for operation even in cold, wet weather. These light-weight binoculars incorporate Steiner PC-5 coatings on every lens surface throughout the system. Weigh less than 10 oz.

· CAMELBAK, BFM – (62594, Multicam) 100 oz Mil Spec Antidote™ Long with easy-to-fill and clean wide-mouth opening, rugged and durable material, leak-proof ¼-turn cap, insulated PureFlow™ tube, patented Big Bite™ Valve, Quick Link™ Exit Port and Drink Port, QL HydroLock™ one-handed flow control.

Low-profile Composite MOLLE panel on front for secure attachment of accessory pouches; 4 zippers on main compartment allow for multiple access points to gear; Full clamshell opening for easy access to gear and MedBak™ Insert (sold separately; ASIPS Radio attachment points hold comms securely with dual antenna ports; Glasses, goggles and NVG pocket with external access; Multiple drink tube exit ports -- for routing drink tube over the shoulder or under an arm; Lightweight, Shoulder harness and back panel provide better load distribution and comfort while carrying a heavy load, durable 500D Cordura® Fabric.

· CAMELBAK, Mil Tac M.U.L.E. – (62605, multi-cam) Reservoir features a 100 oz Mil Spec Antidote™ Long with easy-to-fill and clean wide-mouth opening, rugged and durable material, leak-proof ¼-turn cap, insulated PureFlow™ tube, patented Big Bite™ Valve, Quick Link™ Exit Port and Drink Port, QL HydroLock™ one-handed flow control. Air Director™ Back Panel for increased ventilation, Side-release shoulder straps for rapid removal, Access separate insulated reservoir compartment without having to remove pack, Glasses, goggles and NVG pocket with external access, Multiple drink tube exit ports for routing drink tube over the shoulder or under an arm, Lightweight, durable 500D Cordura® Fabric.

· FORCE PROTECTOR, Large Deployer XP Loadout Bag – (FOR68, coyote) Collapsible wheeled footlocker. 1000 Denier Nilon Mil-spec class 3, 400 Denier Nilon Packcloth, 1050 Denier Nylon Ballistic, 360% FPG FoamTech padding system, 35oz Hypalon, mil-spec webbing, mil-spec binding tapes, #10 YKK Zippers with locking capability and paracord pulls, Nylon Bonded VT295 thread.

· NOROTOS, AKA2-HYPER NGV Helmet Mount Assembly – (Tan 1940010-TAN-2) is compatible with PVS-31 night vision goggles. This mounting system can be adapted to fit most MICH, ACH, and PASGT helmets. An optional strap assembly can be employed to ensure a proper fit to nearly any style of helmet. The mechanism provides full x and y axis adjustments, with flip-up/down capability.

· PELICAN, 8060 LED Flashlight – (8060-001-110) Powered by a rechargeable NiMH battery pack or 4C cells, the Pelican™ 8060 LED is the longest running duty light available. Seven hours of run time and 180 lumens of output. Can be used with 4C alkaline battaries and comes standard with charger base, rechargeable battery, and a 110V wall charger.

· CORE SURVIVAL HEL-STAR 6 Gen III Helmet Mounted, Multi-function Light – (HS-640-04) Green (Steady), Red (Steady), IR (Flash), IR (Steady) The newly refined HEL-STAR 6® Gen III offers a sleek design, integrated tie downs, battery changes without tools, and advanced electronics, including a field re-reprogramming option. Sliding switches enhance tactile feel and provide positive, intuitive control between the two operating modes and four user-defined functions. Functions can be selected from virtually any combination of White, four different color options, and IR – either flashing or steady. Variable flash rates, intensities and coded signals provide expanded IFF capability. Independent testing has confirmed that the HEL-STAR 6® Gen III exceeds the FAA’s 3 statute mile visibility requirement and is shock and vibration resistant, dustproof, and open sea waterproof to 130 fsw (laboratory 300+ feet).

· ARC’TERYX KNEE CAPS, CROCODILE II– (9467) Lightweight, anatomically shaped knee cap that can be worn in conjunction with the LEAF Assault Pant AR/FR or the LEAF Assault Coverall AR/FR. The Knee Cap can also be worn in a stand alone manner. Must feature 2 elastic straps per knee cap, low-profile T-locks for quick adjustability, and articulated patterning for unrestricted mobility.

· ALTA, Superflex Elbow Pads– (53010.16, multicam) Alta Flex Elbow Pads are designed to protect the user while crawling. The flexible Coyote rubberized, non-slip cap grips the surface while allowing the user to crawl faster. High density foam padding gives maximum comfort to the elbows. Made with Du Pont Cordura® Nylon.

· SUREFIRE, P2ZX Fury CombatLight – (P2XT-A-BK) The P2X Fury Tactical is a simpler, single-output version of our dual-output Fury. Built for tactical professionals, this pocket-sized searchlight delivers 600 lumens of intense, blinding light with a simple press or click of its tactical tailcap click switch, the same type used on many SureFire WeaponLights for years—partially press for momentary-on; press further until it clicks for constant-on activation. A precision micro-textured reflector shapes the light from its virtually indestructible high-efficiency LED to create a smooth, far-reaching, comparatively wide beam with a bright central area that’s perfect for tactical and general use. The Fury Tactical’s high-strength aerospace aluminum body is knurled for a comfortable, secure grip in all kinds of weather, and it’s hard anodized to military specifications for extreme use in harsh environments.

· LEATHERMAN, MUT Multi-Tool – (LM-850022) The Leatherman MUT is the first multi-tool that functions as both a tactical and practical tool for military, LE, or civilian shooters. The MUT features multiple areas on the tool threaded for cleaning rods and brushes and all the screwdriver bits are sized for standard military and civilian sighting adjustment work. Also built into the design of the tool is the flexibility to replace the most commonly used parts on the spot, using a simple Torx #8, keeping down-time to a minimum. With all this, a MOLLE sheath and scope adjustment wrench included, the Leatherman MUT may very well be the most efficient and useful piece in your kit.

· FORCE PROTECTOR, FPG Thermashield, General Purpose – (FOR72) A large 6 feet by 10 feet three layer heat reflective blanket. Can be used in extreme heat, extreme cold, heat reflective expedient shelter, and is water resistant.

· BENCHMADE, 140 Nimravus Tanto Knife – (141SBKSN) A high quality combat fixed blade knife. Features a full tang handle that is ergonimically shaped and features a deep index finger groove and a notched thumb ramp above for superior hand grip. The handle scales are anodized 6061 T-6 aluminum for lightweight performance.

· OTIS, Deluxe Law Enforcement Cleaning System – (FG-85211 BX) Designed for Law Enforcement Pistols and sub guns 9MM through .45 cal., .223 cal./5.56MM, .308 cal./7.62MM rifles and 12 ga shotguns. 8” and 30” memory-flex cables for effective and correct breech to muzzle cleaning. Six firearm specific, heavy duty bronze bore brushes for removing copper deposits and other fouling. Otis BIO CLP helps clean, lubricate and protect the barrel in one step. Specialized precision tools allow complete breakdown and detailed cleaning of your firearm. Lightweight soft pack with belt loop for convenient carrying.

· BDS TACTICAL COMBAT TRAUMA MEDICAL BAG– (CTAB, Multicam) The BDS Tactical Gear Combat Trauma Medical Bag has been designed and built from the ground up considering the specific needs of a Combat Medic. From the compartmentalized interior with airway panel to the external IV pouches on each side this bag can be set up to quickly access those life saving tools that are most often needed in combat.Each CTAB has (1) zippered and (3) drawstring closure pouches that are fully removable from the back wall of the CTAB.Each CTAB is built with standard with (2) 500ml IV pouches and (2) 1000ml IV pouches. These pouches are mounted permanently on each side of the CTAB and they are covered in PALS webbing so that smaller pouches or tools can be attached. IV pouches made with single zipper head.

· NORTH AMERICAN RESCUE, Eagle IFAK – (85-0179, multi-cam) The Basic Life Support (BLS) Eagle IFAK is a compact, versatile individual first aid kit that offers both MOLLE/PALS – style connectors to attach to the assault vest/body armor and an upper or lower mounted 2.25” belt loop attachment to secure the kit in the high or low position on your duty/pistol belt, all in one carrying platform. Sized as the smallest IFAK in our product line, this innovative kit contains all of the essential basic life support equipment that is needed to address leading causes of potentially preventable death in a tactical environment. Featuring a Quick Pull Tab, the carrying bag easily opens to reveal the removable kit with just one hand. The kit has a unique, detachable shock-cord inner panel that can be adjusted to carry different components and provides easy access to your IFAK contents by simply pulling the color-coded tab to remove the panel from the carrying bag. The compact size reduces the space requirement needed for an IFAK on your vest or belt. The BLS Eagle IFAK has the essential life-saving equipment for point-of-wounding and self-aid/buddy-aid care to address penetrating, blast or other traumatic injuries.

· 215 GEAR, Operators Retention Lanyard, Zero – (215 ORLZ) Designed for two end user supplied carabiners. Our Operator's Retention Lanyard is made with the highest quality Mil-Spec materials on the market. Made with eight, 42 stitch bartacks on each running end. Mil-Spec 1” tubular is rated to 4,000 lbs. Made with all high quality Mil-spec materials.

· MISTY MOUNTAIN, Cadillac Tactical Harness – (5126, multi-cam) For tactical and military operations that require personal protection systems for a vertical environment, top tier US special forces choose one harness: the Cadillac Tactical. Reinforced Tie in points are flanked by Dual quick adjust waist buckles to allow for symmetrical loading of the four gear loops, ice clipper slots and haul loop. Leg Loops are built with an integrated auto-block loop and quick adjust buckles. Built from abrasion resistant, load rated, nylon and polyester webbings, 500 and 330 D Nylon face fabrics, and matte aluminum quick adjust buckles which make for the Cadillac Tactical’s legendary light weight and durability. The wide, padded, waist belt and tapered padded leg loops are lined with a high tenacity stretch fabric for comfort and toughness. The Cadillac Tactical was chosen by the US Army for inclusion in the special forces Army Mountain Kit. Available in sizes Small through XXXL. Made in the USA exclusively by Misty Mountain. UIAA Safety Label approved as a type C sit harness, the Cadillac Tactical is load rated to 15 kN. Available in Black, Coyote Brown and MultiCam.

· MISTY MOUNTAIN, ISH Chest Harness – (ISH Chest Harness, multi-cam) Rappelling, climbing and other vertical activities while wearing a heavy pack with just a sit harness can be dangerous and inadvisable. When a higher tie-in point is desired to remain upright, the operator may increase security by wearing the Misty Mountain ISH Chest Harness attached to the belt/leg loops combination to create a full body harness. The chest harness attaches to the sit harness via a 5,000 lb adjustable reinforced nylon loop. Using the ISH Chest harness in conjunction with the belt and leg loops creates a 16kN (3,600 lb) rated full body harness. Currently the ISH System components are available in three colors - Coyote Brown, Black or MultiCam. ISH components are available individually or in different modular kits. The ISH Chest holds the UIAA Safety Label for chest harnesses and is rated to 10 kN in head down configuration.

· YATES, Tactical Rappel Gloves – (925T, tan) Thick full grain double layer palm extends over the palm and to the second joint of your fingers to provide added protection from the heat and friction generated when fast roping. Index finger is seperated for trigger finger dexterity. Designed to fit over flight gloves. Also for tactical and helirappel use. Carabiner hole in wrist for attaching to harness.

· CAMP, D Quick Link 12 MM ALU – (C671) 12 mm aluminum D-shaped quick link for use in anchors, rigging, and work and industrial. Requires a 17 mm open-end wrench.

· Black Diamond ATC-Guide Belay/Rappel Device – (BD620079BLAKALL1, black) Lightweight belay and rappel device providing optimal amount of stopping power when lowering or rappelling. Multiple friction modes for belay and rappel, machined windows through device for weight savings, guide mode works with one or two climbers ascending or descending, hot forged construction, and handles ropes from 7.7mm to 11 mm.

· BLACK DIAMOND, Magnetron Gridlock Carabiner – (BD2102920000ALL1) Combining maximum security and ease of use like never before, the Black Diamond Magnetron GridLock uses the power of magnets to reinvent the auto-locking carabiner. Magnetron Technology uses two magnetic arms in the gate and a steel insert in the carabiner's keylock nose to create an ultra-secure, self-clearing and redundant locking mechanism that can be easily used with either hand. Combine that with our innovative GridLock shape, which traps the belay loop to eliminate cross-loading, and the Magnetron GridLock is the ultimate belay carabiner.

· Petzl Am’d Carabiner Screw Lock (5) – (M34A SLN, screw lock) The Am’D lightweight asymmetrical carabiner is made of aluminum. It has a D shape particularly suited for connection to equipment such as descenders or positioning lanyards. Its fluid interior design and Keylock system facilitate handling.

· Petzl Am’d Carabiner Triact Lock – (M34A TLN) The Am’D lightweight asymmetrical carabiner is made of aluminum. It has a D shape particularly suited for connection to equipment such as descenders or positioning lanyards. Its fluid interior design and Keylock system facilitate handling.

· OAKLEY, SI Ballistic Goggle – (11-150, Black Frame/Clear and Grey lens) The SI Ballistic goggle is fully compliant with the ANSI Z87.1 – 2003 for both protection (high mass/velocity impact and penetration) and optical performance requirements. The SI Ballistic goggle lenses are made from Oakley’s high purity, optical grade polycarbonate, Plutonite® (blocks 100% UVA, UVB, and UVC light). The SI Ballistic Goggle is equipped with a micro-fleece face-foam liner to provide a secure and comfortable fit for all sized heads. Fully compatible with MICH, ACH, CVC, AND PASGT helmets.

· PETZL, Tactikka XP Headlamp – (E89AAB) Designed for activities where stealth is key, the TACTIKKA + headlamp features very long burn time and great lighting versatility: proximity or focused lighting for movement, red lighting accessible as the headlamp is turned on. With a very powerful at 250 lumens of light, TACTIKKA + is also compatible with the CORE rechargeable battery.

· CAMMENGA TRITIUM Military Lensatic Compass – (3H) This lensatic compass has been used by US troops, foreign militaries, law enforcement, special forces, and outdoor enthusiasts of every variety for decades. Tritium light sources provide readability in total darkness. Features of this most rugged and accurate compass are: Luminosity: Tritium Jewel bearing: Sapphire Rotating Bezel: Bi-directional Climate capacity: -50 to+150 degrees F. Cast Aluminum Lanyard: Included Waterproof Carrying Pouch: LC-1 pouch with belt clip New Expected luminous life: 10 years Accuracy: Per MIL-PRF-10436N Dial readings: Degrees and mils. Casting: Aluminum Damping process: Induction (no liquid required) Body: Olive drab Pouch: Olive drab.

· C-THRU, UTM Grid Reader – (GTA, clear) Accurately divides a map's grid into ten 100-meter squares. Transparent template is laminated for durability and features the following metric scales: 1:24,000; 1:62,500; 1:25,000; 1:250,000; 1:50,000; 1:100,000; 1:150,000 and 1:63,360. UTM Grid Reader also incorporates a full 360° protractor. Clear, 5" x 6".

· HAWK, Lapel Microphone – (EP1334QR, ear-hawk) Directional, discreet and durable with a surveillance style clear tube earphone. Highly concealable and lightweight. Polyurethane jacketed kevlar coated cable for extended life in the field. Fitted rubber earmolds for extra comfort after long hours of wear. Compatible with agency service radios (Motorola APX 7000)

· PROFORCE EQUIPMENT, NDUR Signal Mirror – (51220) The Sight-Grid Signal Mirror combines the power of glass mirror reflection with acrylic durability. An acrylic case surrounds the glass mirror protecting it from breaking, keeps it a float if dropped in water and has a lanyard hole. The lightweight signal mirror utilizes Sight-Grid Targeting Retro-Reflective Mesh for aiming reflected light flashes with pin-point accuracy on a target up to 25 miles away.

Deliverables

· The U.S. Border Patrol will not accept partial shipments for this order.

· These items need to be kitted prior to delivery.

· The vendor will include a full equipment replacement warranty for the period of one year beginning on the date full and complete delivery of all bags to the U.S. Border Patrol BORSTAR Team.

· Each kit will have an inventory list in it.

4.0 Period of Performance

All items requested are to be delivered on or before 60 days after receipt of order (ARO).

5.0 Points of Contact

All questions and concerns shall be directed to:

Stephen Traylor Special Operations Supervisor U.S. Border Patrol/Special Operations Group

Bldg. 11169 SSG Sims St. Biggs AAF

El Paso, Texas 79916 stephen.e.traylor@cbp.dhs.gov Joshua Realzola

Supervisory Border Patrol Agent

U.S. Border Patrol/Special Operations Group

Bldg. 11169 SSG Sims St. Biggs AAF

El Paso, Texas 79916 joshua.m.realzola@cbp.dhs.gov