19-20-1201 SPE4A821P0043 HARTECH GROUP CONTRACT.pdf

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

29. AWARD OF CONTRACT: REF. OFFER

16. ADMINISTERED BY CODE

7. FOR SOLICITATION

INFORMATION CALL:

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

1. REQUISITION NUMBER

0084702689

2. CONTRACT NO.

SPE4A8-21-P-0043

3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

a. NAME b. TELEPHONE NUMBER (No collect calls)

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY CODE SPE4A8

DLA AVIATION

ASC INDUSTRIAL PLANT EQUIPMENT

8000 JEFFERSON DAVIS HWY

RICHMOND VA 23297

USA

Local Admin: GRETTA BEASLEY DGB0026 Tel: 804-279-4968 Email: Gretta.Beasley@dla.mil

10. THIS ACQUISITION IS UNRESTRICTED OR SET ASIDE: % FOR:

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

8 (A)

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

NAICS: 322211

SIZE STANDARD:500

11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

12. DISCOUNT TERMS

Net 30 days

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

13b. RATING

14. METHOD OF SOLICITATION

RFQ IFB RFP

15. DELIVER TO CODE SPE4A8

SEE BLOCK 9

Criticality: C PAS : None

17a. CONTRACTOR/ CODE

OFFEROR

FACILITY

CODE

6H5F3

HARTECH GROUP LLC

7900 E UNION AVE STE 1100

DENVER CO 80237-2746

USA

TELEPHONE NO. 3176911279

18a. PAYMENT WILL BE MADE BY CODE SL4701

DEF FIN AND ACCOUNTING SVC

BSM

P O BOX 182317

COLUMBUS OH 43218-2317

USA

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED.

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

25. ACCOUNTING AND APPROPRIATION DATA

AA: 97X4930 5CBX 10110A0 001 3111 1092903741 S33189 $2613501.00

26. TOTAL AWARD AMOUNT (For Govt. Use Only)

$2,613,501.00

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA ARE ARE NOT ATTACHED.

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED.

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (Type or Print) 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or Print) 31c. DATE SIGNED

0000-00-00

SEE SCHEDULE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

STANDARD FORM 1449 (REV.

Prescribed by GSA - FAR (48 CFR) 53.212

SEE ADDENDUM

See Schedule

DATED . YOUR OFFER ON SOLICITATION (BLOCK 5),

INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH ,

HEREIN IS ACCEPTED AS TO ITEMS:

EDWOSB

32a. QUANTITY IN COLUMN 21 HAS BEEN

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:RECEIVED INSPECTED

COMPLETE PARTIAL FINAL

STANDARD FORM 1449 (REV. 2/2012)

36. PAYMENT

PARTIAL FINAL

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

37. CHECK NUMBER

38. S/R ACCOUNT NO. 39. S/R VOUCHER NUMBER 40. PAID BY

42a. RECEIVED BY (Print) 41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

CONTINUED ON NEXT PAGE

PAGE 3 OF 12 PAGES

SPE4A8-21-P-0043

THIS CONTRACT IS IN REFERENCE TO SOLICITATION SPE4A8-20-Q-0076 THAT OPENED JUNE 17, 2020 AND CLOSED ON SEPTEMBER 25, 2020.

EQUIPMENT OFFERED: CAMPBELL1000 C GRINDER

MANUFACTURED BY: CAMPBELL GRINDER COMPANY

*MANUFACTURING LOCATION: SPRING LAKE, MI

MODEL NUMBER: 1000 C 500

COUNTRY OF ORIGIN: USA

ARE YOU A DEALER OR MANUFACTURER: DEALER

DELIVER TWO (2) EACH TO:

COMMANDING OFFICER

FLEET READINESS CENTER SOUTHEAST

HWY 17 BLDG

101 FRCSE

JACKSONVILLE, FL 32212-0016

POC: JOSH BARHAM

(904) 790-6543

DODAAC: N65886

FOB & INSPECTION/ACCEPTANCE

FOB: DESTINATION

INSPECTION: ORIGIN

ACCEPTANCE: DESTINATION

LOCATION OF ORIGIN INSPECTION:

CAMPBELL GRINDER COMPANY

1226 E. PONTALUNA RD.

SPRING LAKE, MI 49456

FOB: Preliminary inspection of the machine shall be at Origin by DLA Aviation with final inspection and acceptance at destination by DLA Aviation upon completion of installation at the customer’s facility by the contractor.

CLIN 0001 CNC VERTICAL GRINDER: Inspection at Origin/Acceptance at Destination CLIN 0002 INSTALLATION: Inspection/Acceptance at Destination CLIN 0003 TRAINING: Inspection/Acceptance at Destination CLIN 0004 TECHNICAL DATA: Inspection at Origin/Acceptance at Destination CLIN 0005 SHIPPING: Inspection/Acceptance at Destination CLIN 0006 IUID TAGS: Inspection at Origin/Acceptance at Destination CLIN 0007 FOUNDATION: Inspection/Acceptance at Destination

Fifteen days’ advance notification is requested to be given to DLA-Aviation prior to each inspection if in the United States. Thirty-day notification is requested for overseas locations.

Preliminary inspection of the machine, IUID Tags and technical data shall be at Origin by DLA Aviation with final inspection and acceptance at destination by DLA Aviation upon completion of installation at the customer’s facility by the contractor. The QAP requires fifteen (15) business days advance notice of each origin inspection. DLA-Aviation requests that you provide thirty (30) days advance notification for each oversea inspection.

The freight cost in this contract will be a Not to Exceed amount. This is a firm-fixed-price contract, and the funding cannot be adjusted upward after award. Freight for this contract will be paid based on the actual costs only.

All payment requests for freight shall be accompanied by actual invoices. Payment requests for freight without actual invoices will be denied.

Special Notes Continued:

1. The Performance Period/Completion Date for all items is 365 days after receipt of order. Refer to the completion date reference in Line Item number one. If any line items do not contain a delivery/completion date the date in Line Item one shall apply.

2. There will be at least a minimum charge of $2,500.00 for each re-inspection that has to be performed by the government due to machine not ready for inspection.

PAGE 4 OF 12 PAGES

3. All questions and issues shall be addressed to the Contract Administrator assigned to this contract. Per FAR clause 52.247-27, Solicitations Not Affected by Oral Agreement, no oral statement of any person shall amen or otherwise affect the terms, conditions or specifications stated in the solicitation or contract. All amendments to the solicitation or modifications to the contract must be made in writing by the Contracting Officer, who is the ONLY individual authorized to make changes on behalf of the Government.

4. Upon completion of all contractual requirements, the vendor must submit a Material Inspection and Receiving Report Form DD250 for signature by the Government representative. The signed DD250 must be submitted DLA Aviation-VICA via email to avniperweb@dla.mil.

5. Packaging/Marking is to be accordance with latest revision of ASTM-D-3951-10.

6. The entire solicitation and amendment 0001 to amendment 0003 is hereby incorporated into the contract by reference (solicitation-only clauses are self-deleting).

7. Quality Assurance Provision (QAP) Number 175 shall apply. Coordination with the Administrative Contracting Officer to schedule inspection at origin is critical. It is the vendor’s responsibility to make arrangements for the origin inspection a minimum of 15 days prior to expected shipment date.

8. The contract will be administered by DLA Aviation, Richmond.

9. Hartech Group is requesting Installment Payments and the bonds will be submitted 10 days after contract award.

10. A Post Award Conference will be held within 60 days after award of contract.

*NOTE: DISREGARD THE CLAUSES LISTED IN PAGES 11-12.. Refer to applicable clauses.

52.246-9061 WARRANTY OF INDUSTRIAL PLANT EQUIPMENT (IPE) – FSG 34 (SEP 2008) – DLAD

(a) Definitions: "Acceptance," as used in this clause, means the act of an authorized representative of the Government by which the Government assumes for itself, or as an agent of another, ownership of existing and identified supplies, or approves specific services rendered, as partial or complete performance of the contract. "Supplies," as used in this clause, means the end items furnished by the Contractor and related services required under this contract. The word does not include "Data."

(b) Contractor's obligations.

(1) The Contractor warrants that for one (1) year all supplies furnished under this contract will be free from defects in material and workmanship and will conform with all requirements of this contract. Warranty period begins from the date of acceptance.

(2) Any supplies or parts thereof corrected or furnished in replacement by the Contractor shall be subject to the conditions of this clause to the same extent as supplies initially delivered. This warranty shall be equal in duration to that set forth in paragraph (b)(1) of this clause and shall run from the date of delivery of the corrected or replaced supplies.

(3) When the machine is inoperable because of a defect, deficiency and/or nonconformance subject to the Contractor's warranty and after the Contractor has received written notice of the defect, deficiency or nonconformance, the warranty shall be extended for the time period during which the machine was inoperable (i.e., length of time from when Contractor receives notification until machine is operable.)

(4) The Contractor shall not be obligated to correct or replace supplies if the facilities, tooling, drawings, or other equipment or supplies necessary to accomplish the correction or replacement have been made unavailable to the Contractor by action of the Government. In the event that correction or replacement has been directed, the Contractor shall promptly notify the Contracting Officer, in writing, of the nonavailability.

(5) The Contractor shall also prepare and furnish to the Government data and reports applicable to any correction required (including revision and updating of all affected data called for under this contract) at no increase in the contract price.

(6) When supplies are returned to the Contractor, the Contractor shall bear the transportation costs from the place of delivery specified in the contract (irrespective of the f.o.b. point or the point of acceptance) to the Contractor's plant and return. When defective items are returned to the Contractor from other than the place of delivery specified in the contract, or when the Government exercises alternate remedies, the Contractor's liability for transportation charges incurred shall not exceed an amount equal to the cost of transportation by the usual commercial method of shipment between the place of delivery specified in the contract and the Contractor's plant and subsequent return.

(7) The warranties expressed herein are in lieu of any implied warranties of merchantability and "fitness for a particular purpose."

(c) Remedies Available to the Government.

(1) In the event of a breach of the Contractor's warranty in paragraph (b)(1) and (b)(2) of this clause, the Government may, at no increase in contract price-

PAGE 5 OF 12 PAGES

(i) Require the Contractor, at the place of delivery specified in the contract (irrespective of the f.o.b. point or point of acceptance) or at the Contractor's plant, to repair or replace, at the Contractor's election, defective or nonconforming supplies, or

(ii) Require the Contractor to furnish at the Contractor's plant the materials or parts and installation instructions required to successfully accomplish the correction.

(iii) Where it is impracticable for the Government to pursue remedies at (i) and (ii), the Government may arrange for the repair or replacement of defective or nonconforming supplies by the Government or by another source at the Contractor's expense. Where the Government is to accomplish the repair, the Contractor at the Government's option will furnish the material or parts and the instruction required to successfully accomplish the repair.

(2) If the Contracting Officer does not require correction or replacement of defective or nonconforming supplies or the Contractor is not obligated to correct or replace under paragraph (b)(4) of this clause, the Government shall be entitled to an equitable reduction in the contract price.

(3) The Contracting Officer shall notify the Contractor in writing of any breach of the warranty in paragraph (b) of this clause within a reasonable period, but not later than 45 days after discovery of the defect. The Contractor shall submit to the Contracting Officer a written recommendation within 2 working days as to the corrective action required to remedy the breach. After the notice of breach, but not later than 5 days after receipt of the Contractor's recommendation for corrective action, the Contracting Officer may, in writing, direct correction or replacements in paragraph (c)(1) of this clause, and the Contractor shall, notwithstanding any disagreement regarding the existence of a breach of warranty, comply with this direction within 5 days of receipt. If it is later determined that the Contractor did not breach the warranty in paragraph (b)

(1) and (b)(2) of this clause, the contract price will be equitably adjusted.

(4) If supplies are corrected or replaced, the period for notification of a breach of the Contractor's warranty in paragraph (c) of this clause shall be 45 days from the discovery of the defect.

(5) The rights and remedies of the Government provided in this clause are in addition to and do not limit any rights afforded to the Government by any other clause of the contract.

(6) The Contractor shall be liable for the reasonable costs of disassembly and/or reassembly of larger items when it is necessary to remove the supplies to be inspected and/or returned for correction or replacement.

Warranty terms shall be in accordance with the Warranty Clause 52.246-9061, WARRANTY OF INDUSTRIAL PLANT EQUIPMENT (IPE) – FSG 34 cited above.

“If there are attachments to your award or modification document, you will find a section titled Attachments with a subsection titled “List of Attachments” on the last page. The following are the steps you will need to follow to access those attachments if you are using Adobe Acrobat Reader X (10.1.3). The steps for older versions of Adobe Acrobat Reader may vary. The latest Adobe Acrobat Reader can be downloaded at http://get.adobe.com/reader/ (Note: this is a third party software. For support please contact Adobe directly.).

1. Open the PDF document either from the link in the email notification or by searching for the award on DLA Internet Bid Board System (DIBBS).

2. Position the cursor over the center of the award document.

3. A floating tool bar appears, click the Adobe Acrobat Reader logo at the right end of the tool bar.

4. This opens another tool bar on the left and side of the award document.

5. On this tool bar, click the paper clip icon.

6. This will open a list of attachments on the left hand side of the award document.

7. Click each attachment in the list to view them.”

ATTACHMETS:

Purchase Description: pages 1-20 QAP: pages 21-23 Clauses: pages 24-70 SE Work Restrictions, Environments Guide, Environmental Compliance Awareness and Badge Form: pages: 71-102 Payment Instructions: page 103 DD250: page 104

PAGE 6 OF 12 PAGES

SUPPLIES/SERVICES: 3415-N00000198

ITEM DESCRIPTION:

SEE THE ATTACHED PURCHASE DESCRIPTION

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 3415-N00000198 2.000 EA $ 1,210,505.00 $ 2,421,010.00

Grinding Machines

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 2022 FEB 22

FOB PAYMENT METHOD: CONTRACTOR

PREP FOR DELIVERY:

SHALL BE PACKAGED STANDARD IN ACCORDANCE WITH ASTM D 3951.

SHIP TO:

COMMANDING OFFICER

FLEET READINESS CENTER SOUTHEAST

HWY 17 BLDG

101 FRCSE

JACKSONVILLE, FL 32212-0016

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 0084702689 0001 N/A N/A N/A N/A

SUPPLIES/SERVICES: 3460-N00004586

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0002 3460-N00004586 IPE 2.000 EA $ 44,667.00 $ 89,334.00

- Installation

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 2022 MAR 09

FOB PAYMENT METHOD: CONTRACTOR

PAGE 7 OF 12 PAGES

SUPPLY/SERVICE: 3460-N00004586 CONT'D

COMMANDING OFFICER

FLEET READINESS CENTER SOUTHEAST

HWY 17 BLDG

ITEM PR PRLI PR PRLI Material Need Ship Date .

0002 0084702689 0002 N/A N/A N/A N/A

SUPPLIES/SERVICES: 3460-N00004594

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0003 3460-N00004594 IPE 1.000 EA $ 22,765.00 $ 22,765.00

- Training

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 2022 MAR 09

FOB PAYMENT METHOD: CONTRACTOR

COMMANDING OFFICER

FLEET READINESS CENTER SOUTHEAST

HWY 17 BLDG

ITEM PR PRLI PR PRLI Material Need Ship Date .

0003 0084702689 0003 N/A N/A N/A N/A

SUPPLIES/SERVICES: 3460-N00004592

PAGE 8 OF 12 PAGES

SUPPLY/SERVICE: 3460-N00004592 CONT'D

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0004 3460-N00004592 IPE 1.000 LT $ 5,682.00 $ 5,682.00

- Technical Data

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 2022 MAR 09

FOB PAYMENT METHOD: CONTRACTOR

COMMANDING OFFICER

FLEET READINESS CENTER SOUTHEAST

HWY 17 BLDG

ITEM PR PRLI PR PRLI Material Need Ship Date .

0004 0084702689 0004 N/A N/A N/A N/A

SUPPLIES/SERVICES: 3460-N00004591

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0005 3460-N00004591 IPE 2.000 EA $ 18,000.00 $ 36,000.00

- Shipping

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 2022 MAR 09

FOB PAYMENT METHOD: CONTRACTOR

PAGE 9 OF 12 PAGES

SUPPLY/SERVICE: 3460-N00004591 CONT'D

COMMANDING OFFICER

FLEET READINESS CENTER SOUTHEAST

HWY 17 BLDG

ITEM PR PRLI PR PRLI Material Need Ship Date .

0005 0084702689 0005 N/A N/A N/A N/A

SUPPLIES/SERVICES: 3460-N00004587

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0006 3460-N00004587 IPE 2.000 EA $ 688.00 $ 1,376.00

- IUID Tag

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 2022 MAR 09

FOB PAYMENT METHOD: CONTRACTOR

COMMANDING OFFICER

FLEET READINESS CENTER SOUTHEAST

HWY 17 BLDG

ITEM PR PRLI PR PRLI Material Need Ship Date .

0006 0084702689 0006 N/A N/A N/A N/A

PAGE 10 OF 12 PAGES

SUPPLY/SERVICE: 3460-N00004584 CONT'D

SUPPLIES/SERVICES: 3460-N00004584

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0007 3460-N00004584 IPE 2.000 EA $ 18,667.00 $ 37,334.00

- Foundation

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 2022 MAR 09

FOB PAYMENT METHOD: CONTRACTOR

COMMANDING OFFICER

FLEET READINESS CENTER SOUTHEAST

HWY 17 BLDG

ITEM PR PRLI PR PRLI Material Need Ship Date .

0007 0084702689 0007 N/A N/A N/A N/A

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 12 PAGES

Part 12 Clauses

52.202-1 DEFINITIONS (JUN 2020) FAR

52.203-5 COVENANT AGAINST CONTINGENT FEES (MAY 2014) FAR

52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (JUN 2020) FAR

52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (JUN 2020), ALT I (OCT 1995) FAR

52.203-7 ANTI-KICKBACK PROCEDURES (JUN 2020) FAR

52.203-8 CANCELLATION, RECISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR IMPROPER ACTIVITY (MAY 2014) FAR 52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY (MAY 2014) FAR 52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS (JUN 2020) FAR 52.203-17 CONTRACTOR EMPLOYEE WHISTLEBLOWER RIGHTS AND REQUIREMENT TO INFORM EMPLOYEES OF

WHISTLEBLOWER RIGHTS (JUN 2020) FAR

252.203-7001 PROHIBITION ON PERSONS CONVICTED OF FRAUD OR OTHER DEFENSE-CONTRACT-RELATED FELONIES (DEC

2008) DFARS

52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON POSTCONSUMER FIBER CONTENT PAPER (MAY 2011) FAR 252.205-7000 PROVISION OF INFORMATION TO COOPERATIVE AGREEMENT HOLDERS (DEC 1991) DFARS 52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT (JUN 2020) FAR

252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE GOVERNMENT OF A COUNTRY

THAT IS A STATE SPONSOR OF TERRORISM (MAY 2019) DFARS

52.222-19 CHILD LABOR - COOPERATION WITH AUTHORITIES AND REMEDIES (DEVIATION 2020-O0019) (JUL 2020) FAR

(a) Applicability. This clause does not apply to the extent that the Contractor is supplying end products mined, produced, or manufactured in --

(1) Israel, and the anticipated value of the acquisition is $50,000 or more;

(2) Mexico, and the anticipated value of the acquisition is $83,099 or more; or

(3) Armenia, Aruba, Australia, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Italy, Japan, Korea, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, Ukraine, or the United Kingdom and the anticipated value of the acquisition is $182,000 or more.

(b) Cooperation with Authorities. To enforce the laws prohibiting the manufacture or importation of products mined, produced, or manufactured by forced or indentured child labor, authorized officials may need to conduct investigations to determine whether forced or indentured child labor was used to mine, produce, or manufacture any product furnished under this contract. If the solicitation includes the provision 52.222-18, Certification Regarding Knowledge of Child Labor for Listed End Products, or the equivalent at 52.212-3(i), the Contractor agrees to cooperate fully with authorized officials of the contracting agency, the Department of the Treasury, or the Department of Justice by providing reasonable access to records, documents, persons, or premises upon reasonable request by the authorized officials.

(c) Violations. The Government may impose remedies set forth in paragraph (d) for the following violations:

(1) The Contractor has submitted a false certification regarding knowledge of the use of forced or indentured child labor for listed end products.

(2) The Contractor has failed to cooperate, if required, in accordance with paragraph (b) of this clause, with an investigation of the use of forced or indentured child labor by an Inspector General, Attorney General, or the Secretary of the Treasury.

(3) The Contractor uses forced or indentured child labor in its mining, production, or manufacturing processes.

(4) The Contractor has furnished under the contract end products or components that have been mined, produced, or manufactured wholly or in part by forced or indentured child labor. (The Government will not pursue remedies at paragraph (d)(2) or paragraph (d)(3) of this clause unless sufficient evidence indicates that the Contractor knew of the violation.)

(d) Remedies.

(1) The Contracting Officer may terminate the contract.

(2) The suspending official may suspend the Contractor in accordance with procedures in FAR Subpart 9.4.

(3) The debarring official may debar the Contractor for a period not to exceed 3 years in accordance with the procedures in FAR Subpart 9.4.

(End of clause)

52.222-21 PROHIBITION OF SEGREGATED FACILITIES (APR 2015) FAR

52.222-26 EQUAL OPPORTUNITY (SEP 2016) FAR

52.222-40 NOTIFICATION OF EMPLOYEE RIGHTS UNDER THE NATIONAL LABOR RELATIONS ACT (DEC 2010) FAR

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 12 PAGES

Part 12 Clauses (CONTINUED)

252.226-7001 UTILIZATION OF INDIAN ORGANIZATIONS, INDIAN-OWNED ECONOMIC ENTERPRISES, AND NATIVE HAWAIIAN

SMALL BUSINESS CONCERNS (SEP 2004) DFARS

52.232-17 INTEREST (MAY 2014) FAR

252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006) DFARS

52.242-13 BANKRUPTCY (JUL 1995) FAR

252.243-7002 REQUESTS FOR EQUITABLE ADJUSTMENTS (DEC 2012) DFARS

As prescribed in 243.205-71, use the following clause:

(a) The amount of any request for equitable adjustment to contract terms shall accurately reflect the contract adjustment for which the Contractor believes the Government is liable. The request shall include only costs for performing the change, and shall not include any costs that already have been reimbursed or that have been separately claimed. All indirect costs included in the request shall be properly allocable to the change in accordance with applicable acquisition regulations.

(b) In accordance with 10 U.S.C. 2410(a), any request for equitable adjustment to contract terms that exceeds the simplified acquisition threshold shall bear, at the time of submission, the following certificate executed by an individual authorized to certify the request on behalf of the Contractor:

I certify that the request is made in good faith, and that the supporting data are accurate and complete to the best of my knowledge and belief.

(Official's Name)

(Title)

(c) The certification in paragraph (b) of this clause requires full disclosure of all relevant facts, including

(1) Certified cost or pricing data, if required, in accordance with subsection 15.403-4 of the Federal Acquisition Regulation (FAR); and

(2) Data other than certified cost or pricing data, in accordance with subsection 15.403-3 of the FAR, including actual cost data and data to support any estimated costs, even if certified cost or pricing data are not required.

(d) The certification requirement in paragraph (b) of this clause does not apply to

(1) Requests for routine contract payments; for example, requests for payment for accepted supplies and services, routine vouchers under a cost-reimbursement type contract, or progress payment invoices; or

(2) Final adjustments under an incentive provision of the contract.

(End of clause)

252.246-7007 CONTRACTOR COUNTERFEIT ELECTRONIC PART DETECTION AND AVOIDANCE SYSTEM (AUG 2016) DFARS

252.246-7008 SOURCES OF ELECTRONIC PARTS (MAY 2018) DFARS

52.247-34 F.O.B. DESTINATION (NOV 1991) FAR

VIBB 19-20-1201

August 19, 2020

PURCHASE DESCRIPTION FOR THE ACQUISITION OF TWO

(2) CNC VERTICAL GRINDERS

SCOPE.

Scope. The content of this specification describes the minimum requirements for two

(2) Computer Numeric Control (CNC) Vertical Grinders to be installed at the Fleet Readiness Center South East (FRCSE) Jacksonville, Florida. The contractor shall provide complete installation services as described herein and be responsible for the operation and interfacing of the end item systems. The machine described in this document is intended for use in the aerospace manufacturing and repair industry.

APPLICABLE DOCUMENTS.

General. The documents listed in this section are cited in sections 3 and 4 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3 and 4 of this specification, whether or not they are listed.

Government Documents. (Remove and replace documents as necessary. Ensure dates and editions are current at time of writing the specification.)

Specifications, Standards, and Handbooks. The following specifications, standards and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the solicitation or contract.

STANDARDS – FEDERAL

FED-STD-H28B: Screw Thread Standards for Federal Service (2019 Ed.)

U.S Department of Labor, Occupational Safety and Health Administration

(OSHA)

29 CFR 1910 Vol. 5: General Industry, OSHA Safety and Health Standards (2017 Ed.)

(Application for copies should be addressed to the OSHA Publications Superintendent of Documents P.O. Box 37535 Washington, D.C. 20013-7535)

UNIFIED FACILITIES CODE (UFC)

UFC 1-200-01w/Change 2: General Building Requirements (2011 Ed.)

(Copies can be acquired at https://quicksearch.dla.mil/qsSearch.aspx)

19-20-1201 SPE4A8-21-P-0043 Page 1 of 104

MILITARY STANDARDS

MIL-STD-130N w/Change 1: Identification Marking of U.S. Military Property (2012 Ed.) Item Unique Identification Marking (IUID)

(Application for copies should be addressed to Air Force Product Data Systems Modernization Standards (TMSS) Office, 554 ELSG/SBP, 4375 Chidlaw Road, Bldg. 262, Room S008, Wright-Patterson AFB, OH 45433-5006, Phone (937) 257- 0870 or 0853 or https://quicksearch.dla.mil/qsSearch.aspx)

Other Government Documents, Drawings, and Publications. The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the solicitation or contract.

Non-Government Publications, Specifications, Standards, and Handbooks. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the solicitation or contract.

American Concrete Institute

ACI 301- Specification for Structural Concrete. (2016 Ed.)

ACI 304R - Guide for Measuring, Mixing, Transporting and Placing Concrete.

(2009 Ed.)

ACI 305R - American Concrete Institute, Hot Weather Concreting. (2010 Ed.)

ACI 306R – American Concrete Institute, Cold Weather Concreting. (2010 Ed.)

(Possible purchase sites; www.aci-int.org or http://www.concrete.org/general/home.asp, http://global.ihs.com)

American Gear Manufacturers Association (AGMA)

AGMA ISO 1328-1-B14: Cylindrical Gears - ISO System of Flank Tolerance Classification - Part 1: Definitions and Allowable Values of Deviations Relevant to Flanks of Gear Teeth (2014 Ed.)

AGMA 2001-C95: Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth. (2014 Ed.)

AGMA 2011-A98: Cylindrical Wormgearing Tolerance and Inspection Methods.

(1998 Ed.)

(Address application for copies to: 500 Montgomery Street, Suite 350, Alexandria, VA 22314-1581 USA)

19-20-1201 SPE4A8-21-P-0043 Page 2 of 104

American National Standards Institute, Inc. (ANSI)

ANSI B5.1M: T-Slots, their Bolts, Nuts, and Tongues, Revision of ANSI B5.1- 1975 (1985 Ed. 2014R)

ANSI B11.9: Machine Tools: Safety Requirements for Grinding Machines (2010 Ed.)

(Address application for copies to the American National Standards Institute, 11 West 42nd Street, New York, NY 10036)

American Society of Mechanical Engineers (ASME)

ASME B5.48: Ball Screws (1977 Ed. 2013R)

(Applications for copies should be addressed to ASME International Three Park Avenue New York, NY 10016-5990 or www.asme.org)

International Organization for Standardization (ISO)

ISO 4413: Hydraulic fluid power-General rules and safety requirements for systems and their components (2010 Ed.)

ISO 4414: Pneumatic power-General rules and safety requirements for systems and their components (2010 Ed.)

(Application for copies should be addressed to the International Organization for Standardization (ISO) 1 rue de Varembé, Casepostale56, CH211Geneva 20, Switzerland)

National Electrical Manufacturers Association (NEMA)

NEMA ICS 1: Industrial Control and Systems General Requirements (2000 Ed.

2015R)

NEMA ICS 6: Industrial Control and Systems: Enclosures (1993 Ed. 2016R)

NEMA MG 1: Motors and Generators (2018 Ed.)

(Application for copies should be addressed to the National Electrical Manufacturers Association, 1300 N 17th Street, Rosslyn, VA 22209)

National Fire Protection Association (NFPA)

NFPA 70: National Electrical Code (2017 Ed.)

NFPA 79: Electrical Standard for Industrial Machinery (2018 Ed.)

19-20-1201 SPE4A8-21-P-0043 Page 3 of 104

(Applications for copies should be addressed to the National Fire Protection Association, ATTN: Support Services, 11 Tracy Drive, Avon, MA 02322)

TECHAMERICA

TIA-267-C: Axis and Motion Nomenclature for Numerically Controlled Machines (1990 Ed.)

(Application for copies should be addressed to: TECHAMERICA, 601 Pennsylvania Ave., NW, North Building Suite 600 Washington D.C. 20004-2650)

Order of Precedence. In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulation unless a specific exemption has been obtained.

REQUIREMENTS.

Design. The item offered shall be new and a current commercially available model. A current model is defined as the manufacturer’s currently produced model which, on the date this solicitation is issued, has been designed, engineered, sold or is being offered for sale through advertisements or manufacturer’s published catalogue or brochures. Products such as a prototype unit, pre-production model, or experimental unit do not qualify as meeting the requirements specified herein. The machine shall include all components, parts, and features necessary to meet the performance requirements specified herein. All parts subject to wear, breakage or distortion shall be accessible for adjustment, replacement, and repair.

Measuring and Indicating Device Graduations. All measuring and indicating devices on the machine shall be graduated in the inch/pound.

Controls. All electrical, mechanical, hydraulic, and pneumatic operating controls shall be located convenient to the operator's work station(s).

Safety and Health Requirements. All machine parts, components, mechanisms, and assemblies furnished on the machine, whether or not specifically required herein, shall comply with all of the requirements of OSHA 29 CFR 1910.

Safety Guarding. Covers, guards, or other safety devices shall be provided per ANSI B11.9. The safety devices shall not interfere with the operation of the machine. The safety devices shall prevent unintentional contact with the guarded part, and shall be easily removed to facilitate inspection, maintenance, and repair of the parts.

Audible Noise Level. Audible noise emitted by the equipment shall not exceed 84 decibels (dB), measured on the “A” weighted scale of a standard Type II sound level meter, at the operator's work position or any point at a distance of three (3) feet from the

19-20-1201 SPE4A8-21-P-0043 Page 4 of 104 equipment. Noise generated by the work piece shall be excluded in determining compliance of the equipment with the 84 dB requirements.

Mercury Restriction. The machine shall not contain mercury or mercury compounds nor be exposed to free mercury during manufacture with the exception of fluorescent lighting where required.

Asbestos Restriction. Asbestos and materials containing asbestos shall not be used on or in the machine.

Lead. Lead and materials containing lead shall not be used on or in the machine with the exception to radiation cladding and lead solder in circuits.

Use of Polychlorinated Biphenyl (PCB). The use of polychlorinated biphenyl (PCB) on or in the equipment is prohibited. The machine shall be considered PCB free providing certification to be verified containing less than 5 parts per million (<5ppm) in accordance with 40 CFR part 761.

Environmental Protection. Under the operating, service, transportation, and storage conditions described herein, the machine shall not emit materials hazardous to the ecological system as prohibited by Federal, state, or local statutes in effect at the point of installation.

Lubrication. Means shall be provided to ensure adequate lubrication (oil, grease, coolant, etc.) for all moving parts. Recirculating lubrication systems shall include a filter that is cleanable or replaceable. Each lubricant reservoir shall have at least a 24-hour capacity. Means shall be provided to indicate a low lubrication condition. When a low lubrication condition occurs, the machine shall complete the current operation and come to a complete stop. The machine shall indicate that lubrication is required and the designated personnel shall refill the lubrication reservoirs according to machine manuals. All oil holes, grease fittings, and filler caps shall be easily accessible.

Replacement Parts. All parts subject to replacement shall be manufactured to definite dimensions and tolerances. Replacement parts shall be interchangeable without requiring modification. Replacement parts are those that are subject to wear or failure such as gears, bearings, shafts, feed screws, drive belts, pumps, and seals. Electrical replacement parts shall include but not be limited to, motors, relays, fuses, switches, magnetics, pushbuttons, light bulbs, braking mechanisms, and solid-state devices. Tooling and accessories normally supplied as standard items shall also be considered replacement parts.

Construction. The machine shall be constructed of parts that are new, without defects, and free of repairs. The structure shall withstand all forces encountered during operation of the machine to its maximum rating and capacity without distortion.

Castings and Forgings. All castings and forgings shall be free of defects, scale, and mismatching. No processes such as welding, peening, plugging, filling with solder or paste shall be used for reclaiming any defective part.

19-20-1201 SPE4A8-21-P-0043 Page 5 of 104

Fastening Devices. All screws, pins, bolts, and other fasteners shall be installed to prevent unintentional loosening. Fastening devices subject to removal or adjustment shall not be permanently installed.

Threads. All threaded parts used on the machine and its related attachments and accessories shall conform to FED-STD-H28A and the applicable “Detailed Standard” section referenced therein.

Gears. All gears of axis drive trains shall conform to or exceed all provisions of AGMA 2001-C95, AGMA 2011-A98, and AGMA ISO 1328-1-B14. All gears shall be of proper width and size to transmit full-rated torque and horsepower throughout the speed ranges without failure for the expected service life of the machine. Gears in drive trains shall be hardened and ground steel.

Surfaces. All surfaces shall be clean and free of harmful or extraneous materials. All edges shall be either rounded or beveled unless sharpness is required to perform a necessary function. The condition and finish of all surfaces shall be in accordance with the manufacturer's commercial practice.

Welding, Brazing, or Soldering. Welding, brazing, or soldering shall be employed only where specified in the original design. None of these operations shall be employed as a repair measure for any defective part.

Painting. The machine shall be painted in accordance with the manufacturer’s commercial practice. All paint shall be of the lead free type.

Workmanship. Workmanship of the machine shall meet all requirements specified herein and shall be of a quality equal to that prevailing among manufacturers producing equipment of the type covered by this purchase description.

Components. The machine shall consist of not less than the following components:

Base. The base shall be a stress relieved, heavy duty, ribbed casting or steel weldment having characteristics that minimize both thermal and vibration effects, while providing the strength and size to assure maximum rigidity and support for any load within the rated capacity of the machine. Means shall be provided for accurate, ease of leveling.

Table. The worktable shall be a casting of iron, or iron alloy, internally ribbed and proportioned to support and withstand the maximum capacity work-piece weights and tool thrust loads. A direct drive AC servomotor, protected by the table housing, shall provide the drive for the table. The table shall have eight (8) radial T-slots for fixture location. The size and configuration of the T-slots shall be in accordance with ANSI B5.1M. The table and base shall be designed to preclude fluid intrusion into critical components with air purging. The table shall be configured to supply coolant thought the center of table.

Machine Ways. Machine ways shall be hardened. The ways shall be of a type suitable for high grade precision numerically controlled machines covered by this purchase description. Movement of the slides on the way surfaces shall be through adjustable

19-20-1201 SPE4A8-21-P-0043 Page 6 of 104 preloaded, re-circulating roller bearing cartridges or nonmetallic way liners having a low coefficient of friction, with excellent slip-stick and damping properties. Protection of the machine ways shall be either telescoping or curtain type way covers equipped with way wipers.

Axes. All axes of the machine shall be actuated through a closed loop, high-gain electrical servo mechanism driving re-circulating ball screws and nuts. Infinitely variable feed drives shall be provided for all axes. Axes shall be machined to accept way bearings of a precise fit to their respective ways. All ball screws shall be of the double nut design meeting the requirements of ASME B5.48 Class 3, and equipped with seals to exclude foreign material and prevent loss of lubricant. Axis description shall conform to TIA-267- C. Linear AC digital servo for axis drives will also be acceptable.

Power rapid Traverse. Powered rapid traverse shall be provided for movement of all axes. The rate of rapid traverse shall be independent of any feed adjustment.

Spindle. The contractor shall provide a precision grinding spindle. The spindle shall be equipped with ultra-precision balanced pre-loaded bearings. A precision balanced AC motor shall be incorporated into the spindle. The spindle shall be designed and manufactured with good vibration damping characteristics. The grinding spindle shall be designed for operation in both, abrasive dust and wet environment conditions. The diameter of the spindle shall not exceed 8 inches.

Spindle Swivel. The spindle swivel (B axis) shall be CNC driven with dual worm gears so the system can be preloaded electrically. The swivel shall be supported by roller bearing for maximum support. Positioning feedback shall be by direct mounted absolute rotary encoders. The system shall be sealed and air purged to prevent high coolant flow from entering the system.

Wheel Dresser and Holder. The machine shall include a mounted wheel dresser unit. The dresser shall utilize a single point diamond and a motor driven diamond disc.

Coolant shall be directed at the point of wheel dress, and switched on and off through the CNC unit in addition to the automatic cycle. Wheel dressing compensation shall be automatic, and the dressing cycle controlled by the CNC. Programmable contour dressing wheel shall be provided. The system shall be sealed and air purged to prevent high coolant flow from entering the system.

Tool Changer. The tool changer shall be fully automatic, servomotor driven, and fitted with a positioning encoder. The automatic tool changer shall store not less than ten

(10) tools. The tool magazine shall be a dual layer system with 10 tools on the lower level and 5 tools on the upper. The lower will hold the HSK40 tool and the upper the HSK63.

The storage magazine or tool turret shall permit loading and unloading of grinding wheels, coolant nozzles and part measurement probe. The tool changer shall be arranged for random tool selection, and shall reuse tools that have been returned to the magazine after a program operation. The tool changer shall be integrated into the machine control system together with tool identification coding.

19-20-1201 SPE4A8-21-P-0043 Page 7 of 104

Quick Change Tool Receiver. A quick-change tool receiver shall be mounted to the B-Axis. This allows the ability to purchase standard turning tools and when used with a tool changer, allows for multiple turning tools to be utilized for different operations. The static spindle shall be supplied with an HSK 63 interface. The turning spindle and grinding spindle shall be mounted to the B-Axis. The turning spindle is 180 degrees from the grinding spindle. The B-Axis shall be a dual worm drive with a resolution of .02 arc seconds and a run-out both radially and axially of .0001”.

Measurement System. Resolution, accuracy and repeatability in accordance with the requirements in 3.5, Table II. Data from the measurement system shall be stored in a database, and shall be downloaded to the printer.

Enclosure. The machine shall be fully enclosed and shall be manufactured of steel.

The manufacturer shall minimize the panels that have to be removed for operator of machine maintenance personnel to perform routine maintenance functions. The enclosure shall contain the coolant mist and isolate the grinding operation from the machine operator.

A wash down hose to clean parts inside the enclosure shall be provided.

Doors. Doors shall retract fully in front and overhead to allow full access to the work holding surface with an overhead crane. The machine shall have an air blasting system to keep the operators viewing window clear from coolant splash. The doors shall be fitted with interlocks to prevent the operator from opening the doors during automatic operation of the machine. The interlock shall be designed to withstand the atmosphere within the enclosure without premature failure due to coolant contaminants. The machine shall have the capability to operate manually for operation set-up when the doors are in the open position.

Column. The column shall be an iron casting or equal, internally ribbed and braced to minimize distortion and defection under normal loads. The column shall be of the sliding type, designed to support and accommodate the grinding head and spindle drive mechanism. Column slides and screws shall be shielded and protected from foreign contamination by either telescoping or curtain type way covers and wipers.

Coolant System. The machine shall be supplied with a complete flood type coolant system with CNC selection of on/off coolant flow. The coolant system shall be a single stage system, with a paper filter. The contaminated coolant shall flow through the paper filter to remove ferrous particles and deposit grinding swarf in a hopper. The system shall contain power driven pumps, and all necessary piping to deliver at a minimum pressures of 40 psi of coolant. The sump or reservoir shall have a 200-gallon capacity to permit full flow of coolant. The system shall have means for draining and cleaning and shall include a baffle or a removable strainer for ease of cleaning. Means shall be provided to permit delivery of coolant onto each tool holder, allowing the operator to direct and control the amount of coolant to point of application. An air to water type coolant chiller shall be provided to maintain optimum coolant temperature of 68 degrees +/- 3 degrees.

Hydraulic System. The hydraulic system and all components shall conform to ISO 4413. The system shall be complete, including all pumps, valves, piping, cylinders, and pressure controls.

19-20-1201 SPE4A8-21-P-0043 Page 8 of 104

Pneumatic System. The pneumatic system and all components shall conform to

ISO 4414. The system shall be complete, including all pumps, valves, piping, cylinders, and pressure controls.

Electrical System. The machine shall conform to NFPA 79. The existing source power available at the facility is 480 volt, 3-phase, 60 Hertz (Hz). The machine’s electrical system shall be tolerant of fluctuation of ± 10 percent. The electrical system shall be complete, including any electrical transformer(s) that may be required to modify the existing source voltage to the proper operating voltage of the equipment. A properly rated, and fused, single disconnect device shall be utilized on the machine with means of lockout in the off position only. The machine shall have a standard two (2) plug 110 volt 1 phase 60 Hertz outlet at the operator work station.

Electrical Enclosures. Construction of the electrical enclosures shall conform to NEMA ICS 6 standards. The enclosure shall be a NEMA type 12 and shall provide for ventilation of components and shall be designed for an indoor non-hazardous location. All electrical components shall conform to applicable NEMA ICS 1 standards. The machine shall be provided with interlocks on its electronic cabinet that shall instantly remove power from the equipment when the door is opened in accordance with NFPA 79. The electrical enclosure shall be atmospherically controlled with an air-conditioning unit, controlling humidity and temperature per UFC 1-200-01, condensate lines shall be plumbed to the coolant tank.

Arc Flash Protection. The machine enclosures shall be marked for arc flash in accordance with NFPA 79 Paragraph 16.2.3 “Safety Signs for Electrical Enclosures” for arc flash safety.

Solid-State Components. Electrical devices used to power electrical servo and spindle motors of control voltage delivered to solid-state electrical components shall be solid-state devices. Such devices shall handle the electrical load imposed by operation of the machine to its maximum capability. The use of selenium in solid-state components shall be restricted to those devices that protect other solid-state components from voltage surge.

Controller Features. The machine controller shall consist of a Fanuc 32io series CNC Control or newer, incorporating all standard features.