15B20919Q00000005_UPDATED_SOW.docx

UPGRADE CELL DOORS/LOCKS

PROJECT 2D3D

FEDERAL CORRECTIONAL INSTITUTION (FCI)

MCKEAN

SPECIFICATION SHEET

Prepared By:

Robin Imbrogno, Engineering Technician

U.S. DEPARTMENT OF JUSTICE

Federal Bureau of Prisons Federal Correctional Institution McKean 6975 Route 59 Lewis Run, Pennsylvania 16738

Specification Sheet

UPGRADE CELL DOORS/LOCKS

PROJECT 2D3D

Federal Correctional Institution McKean

SUMMARY OF WORK & PLACE OF PERFORMANCE

The Federal Bureau of Prisons (FBOP), Federal Correctional Institution, McKean, located at 6975 Route 59, Lewis Run, Pennsylvania is soliciting a contract to supply replacement of one hundred and twenty four (124) unit cell doors, 2 (two) handicap accessible cell doors, and 2 (two) unit officers’ doors. Please see the required specifications below.

Contractor will:

· Supply (62)12 gauge steel doors 27 ½” x 81” x 1 ¾” thick lockable doors with a right swing Doors will have three (3) hinge pockets. Measuring from top of door down 6 5/8” – 11 1/8”, 39 1/2” – 44”, 72 ½” – 77”.

Doors will have a 15” x 5” food wicket measuring 38” from bottom of door Food wicket will have a recessed pull on the outside.

Door will have a lock pocket that will hold the BOP provided P-10 lock that will be center above the bolt keep that is centered on the food wicket Doors will have a 5”x 22” window Doors will have recessed pull inside the door and regular pull on outside of cell doors The lock pocket that will hold the BOP provided P-80 lock must meet the center of the P-80 bolt and meet the center of the of the currently installed strike plate measuring 35 5/8” – 40 5/8” measuring down from top of door.

Door will be supplied with mounting plates for the P-10 and P-80 locks.

· Supply (62)12 gauge steel doors 27 ½” x 81” x 1 ¾” thick lockable doors with a left swing Doors will have three (3) hinge pockets. Measuring from top of door down 6 5/8” – 11 1/8”, 39 1/2” – 44”, 72 ½” – 77”.

Doors will have a 15” x 5” food wicket measuring 38” from bottom of door Food wicket will have a recessed pull on the outside.

Door will have a lock pocket that will hold the BOP provided P-10 lock that will be center above the bolt keep that is centered on the food wicket Doors will have a 5”x 22” window Doors will have recessed pull inside the door and regular pull on outside of cell doors The lock pocket that will hold the BOP provided P-80 lock must meet the center of the P-80 bolt and meet the center of the of the currently installed strike plate measuring 35 5/8” – 40 5/8” measuring down from top of door.

Door will be supplied with mounting plates for the P-10 and P-80 locks.

· Supply (1) 12 gauge steel doors 35 ½’ x 81’ x 1 ¾” thick lockable doors with a right swing Doors will have three (3) hinge pockets. Measuring from top of door down 6 5/8” – 11 1/8”, 391/2” – 44”, 72 ½” – 77”.

Doors will have a 5”x 22” window Doors will have inside regular pull only.

The lock pocket that will hold the BOP provided P-80 lock must meet the center of the P-80 bolt and meet the center of the of the currently installed strike plate measuring 35 5/8” – 40 5/8” measuring down from the top of the door

· Supply (1) 12 gauge steel doors 35 ½’ x 81’ x 1 ¾” thick lockable doors with a left swing Doors will have three (3) hinge pockets. Measuring from top of door down 6 5/8” – 11 1/8”, 391/2” – 44”, 72 ½” – 77”.

Doors will have a 5”x 22” window Doors will have inside regular pull only.

The lock pocket that will hold the BOP provided P-80 lock must meet the center of the P-80 bolt and meet the center of the currently installed strike plate measuring 35 5/8” – 40 5/8” measuring down from top of door

· Supply (1) handicap 12 gauge steel doors 35 ½” x 81” x1 ¾” thick lockable doors with right swing Doors will have three (3) hinge pockets. Measuring down from top of door down 6 5/8” – 11 1/8”, 391/2” – 44”, 72 ½” – 77”.

Doors will have a 15” x 5” food wicket measuring 38” from bottom of door Food wicket will have a recessed pull on the outside.

Door will have a lock pocket that will hold the BOP provided P-10 lock that will be center above the bolt keep that is centered on the food wicket Doors will have a 5”x 22” window Doors will have recessed pull inside the door and regular pull on outside of cell doors The lock pocket that will hold the BOP provided P-80 lock must meet the center of the P-80 bolt and meet the center of the currently installed strike plate measuring 35 5/8” – 40 5/8” measuring down from the top of the door Door will be supplied with mounting plates for the P-10 and P-80 locks.

· Supply (1) handicap 12 gauge steel doors 35 ½” x 81” x1 ¾” thick lockable doors with left swing Doors will have three (3) hinge pockets. Measuring down from top of door down 6 5/8” – 11 1/8”, 391/2” – 44”, 72 ½” – 77”.

Doors will have a 15” x 5” food wicket measuring 38” from bottom of door Food wicket will have a recessed pull on the outside.

Door will have a lock pocket that will hold the BOP provided P-10 lock that will be center above the bolt keep that is centered on the food wicket Doors will have a 5”x 22” window Doors will have recessed pull inside the door and regular pull on outside of cell doors The lock pocket that will hold the BOP provided P-80 lock must meet the center of the P-80 bolt and meet the center of the currently installed strike plate measuring 35 5/8” – 40 5/8” measuring down from the top of the door Door will be supplied with mounting plates for the P-10 and P-80 locks.

· Supply (3) hinges per door to meet the specifications of each door

PRICE QUOTES SHOULD BE FOB DESTINATION, LEWIS RUN, PA 16738

image1.png