Sol_140R8125Q0040.pdf

SEE ADDENDUMIS CHECKED

CODE 18a. PAYMENT WILL BE MADE BY

CODE

FACILITYCODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER

OFFEROR

0011285745 CODE 16. ADMINISTERED BYCODE

X

X

334516

SIZE STANDARD:

% FOR:SET ASIDE:UNRESTRICTED ORR81

REQUEST FOR

PROPOSAL

(RFP)

INVITATION

FOR BID (IFB)

10. THIS ACQUISITION ISCODE

REQUEST FOR

QUOTE (RFQ)

14. METHOD OF SOLICITATION

13b. RATING

NORTH AMERICAN INDUSTRY

CLASSIFICATION STANDARD

(NAICS):

SMALL BUSINESS

01/28/2025 1700 ES

01/15/2025

0000000000Kelly Cook (No collect calls)

INFORMATION CALL:

FOR SOLICITATION 8. OFFER DUE DATE/LOCAL TIMEb. TELEPHONE NUMBER a. NAME

4. ORDER NUMBER3. AWARD/ 6. SOLICITATION

140R8125Q0040

5. SOLICITATION NUMBER

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS 1. REQUISITION NUMBER PAGE OF

1 65 0044003975OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

TELEPHONE NO.

17a. CONTRACTOR/

See Schedule

15. DELIVER TO

Denver CO 80225

MS 84-27810

Building 67 - Denver Federal Center Acquisition Operations Branch Denver Office

9. ISSUED BY

7.

2. CONTRACT NO.

EFFECTIVE DATE

1,000

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW

ISSUE DATE

DELIVERY FOR FREE ON BOARD

(FOB) DESTINATION UNLESS

BLOCK IS MARKED

11.

SEE SCHEDULEX

12. DISCOUNT TERMS THIS CONTRACT IS A RATED

ORDER UNDER THE DEFENSE

PRIORITIES AND ALLOCATIONS

SYSTEM - DPAS (15 CFR 700)

13a.

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

(SDVOSB)

HUBZONE SMALL

BUSINESS

8(A)

Bureau of Reclamation

WOMEN-OWNED SMALL

BUSINESS (WOSB)

ECONOMICALLY DISADVANTAGED

WOMEN-OWNED SMALL

BUSINESS (EDWOSB)

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

DELIVER TO:

Bureau of Reclamation-DO Building 56, Dock S6, Rm 1950 6th Avenue & Kipling Street Denver Federal Center Denver CO 80225-0007 US

THIS IS A FIRM FIXED PRICE NAME BRAND OR EQUAL

CONTRACT.

This requirement is Soil & Rock Physical Properties Testing Equipment and Earthwork

(Use Reverse and/or Attach Additional Sheets as Necessary)

HEREIN, IS ACCEPTED AS TO ITEMS:

XX

DATED

Evonne Huggins

. YOUR OFFER ON SOLICITATION (BLOCK 5),

INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER

ARE

ARE

31c. DATE SIGNED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or print)

ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL

SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4. FAR 52.212-3

AND 52.212-5 ARE ATTACHED. ADDENDA

26. TOTAL AWARD AMOUNT (For Government Use Only)

OFFER

STANDARD FORM 1449 (REV. 11/2021)

Prescribed by GSA - FAR (48 CFR) 53.212

ARE NOT ATTACHED.

ARE NOT ATTACHED.

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

30b. NAME AND TITLE OF SIGNER (Type or print)

30a. SIGNATURE OF OFFEROR/CONTRACTOR

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

25. ACCOUNTING AND APPROPRIATION DATA

29. AWARD OF CONTRACT: REFERENCE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32c. DATE 32b. SIGNATURE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

40. PAID BY39. S/R VOUCHER NUMBER38. S/R ACCOUNT NUMBER

37. CHECK NUMBER

FINALPARTIAL

36. PAYMENT

FINALPARTIAL

35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER33. SHIP NUMBER

COMPLETE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

42d. TOTAL CONTAINERS42c. DATE REC'D (YY/MM/DD)

42b. RECEIVED AT (Location)

42a. RECEIVED BY (Print)

41c. DATE41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

STANDARD FORM 1449 (REV. 11/2021) BACK

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

Construction Control Training Equipment.

00010 Clean-N-Weigh Table 1 EA

00020 6-Tray Testing Screen Shaker 1 EA

00030 Door Enclosure for TS-1 1 EA

00040 Standard Dustpan 1 EA

00050 No. 12 Test Screen Tray 1 EA

Continued ...

32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

65 2 of

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

3 65

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140R8125Q0040

00060 No. 4 Test Screen Tray 1 EA

00070 3/8in Test Screen Tray 1 EA

00080 1/2in Test Screen Tray 1 EA

00090 3/4in Test Screen Tray 1 EA

00100 1in Test Screen Tray 1 EA

FOB: Destination

00110 1.5in Test Screen Tray 1 EA

FOB: Destination

00120 2in Test Screen Tray 1 EA

FOB: Destination

00130 2.5in Test Screen Tray 1 EA

FOB: Destination

00140 3in Test Screen Tray 1 EA

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110

4 65

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140R8125Q0040

FOB: Destination

00150 Hydrometer Bath 1 EA

00160 Graduated Cylinders 8 EA

00170 Hydrometers 16 EA

00180 Rubber Stoppers 4 EA

00190 Dispersion Mixer 1 EA

00200 Dispersion Cups 2 EA

00210 Sodium Hex 2 EA

00220 Casagrande Cups 2 EA

00230 Fall Cone Penetrometer 1 EA

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

5 65

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140R8125Q0040

00240 Glass Plates 4 EA

00250 SpG Flasks with stoppers 10 EA

00260 Agg. SpG Bench Set 1 EA

00270 Agg. SpG Basket 1 EA

00280 Large Pans 10 EA

00290 Medium Pans 10 EA

00300 Small Pans 10 EA

00310 Small Scoops 5 EA

00320 Medium Scoops 5 EA

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

6 65

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140R8125Q0040

00330 Large Scoops 5 EA

00340 Platform Pushcarts 2 EA

00350 Instrument Cart 1 EA

00360 Sand Cones (12-inch) 4 EA

00370 Proctor Hammers 4 EA

00380 Proctor Molds (4-inch) 4 EA

00390 Straightedges 4 EA

00400 Sample Ejectors 2 EA

00410 Flow Meters 4 EA

00420 Portable Floor Scales 3 EA

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

7 65

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140R8125Q0040

00430 Storage Crates 8 EA

00440 Shipping

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

RFQ 140R8125Q0040 CONTINAUATION SHEET Page 8 of 65

Table of Contents

SOLICATION INSTRUCTIONS

CLAUSES

52.212-4 CONTRACT TERMS AND CONDITIONS –COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (NOV 2023)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

DOI-AAAP-0028 ELECTRONIC INVOICING AND PAYMENT REQUIREMENTS-

INVOICE PROCESSING PLATFORM (IPP) (FEB 2021)

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT

STATUTES OR EXECUTIVE ORDERS—COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (MAY 2024)

STATEMENT OF WORK

PROVISIONS

52.211-6 BRAND NAME OR EQUAL (AUG 1999)

52.212-1 INSTRUCTIONS TO OFFERORS–COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (SEP 2023)

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

DIAR 1452.215-71 USE AND DISCLOSURE OF PROPOSAL INFORMATION --

DEPARTMENT OF THE INTERIOR (APR 1984)

52.212-2 Evaluation—Commercial Products and Commercial Services (Nov 2021)

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS-COMMERCIAL

PRODUCTS AND COMMERCIAL SERVICES (MAY 2024)

52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND

VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

RFQ 140R8125Q0040 CONTINAUATION SHEET Page 9 of 65

SOLICATION INSTRUCTIONS

BACKGROUND

The Bureau of Reclamation has a requirement to purchase a Soil & Rock Physical Properties Testing Equipment and Earthwork Construction Control Training Equipment as a Name Brand or Equal requirement.

SOCIOECONOMIC/ANTICIPATED AWARD TYPE

Firm Fixed Price, Unrestricted Requirement, Name Brand or Equal.

NORTH AMERICAN INDUSTRICAL CLASSISIFICATION CODE (NAICS)

The following North American Industry Classification Code (NAICS Codes) is the primary code applicable to this acquisition: 334516 Analytical Laboratory Instrument Manufacturing.

EVALUATION

Evaluation shall be conducted in accordance with FAR 52.212-2, see page 46.

LINE ITEM PRICING

Table 1

Requirement 1 - Soil & Rock Physical Properties Testing Equipment Line Item # Description

Quantity Unit of Measure Part No. Price per unit Total

0010 Clean-N-Weigh Table/Gilson 1 ea 0020 6-Tray Testing Screen Shaker/Gilson 1 ea 0030 Door Enclosure for TS-1 1 ea 0040 Standard Dustpan 1 ea 0050 No. 12 Test Screen Tray 1 ea 0060 No. 4 Test Screen Tray 1 ea 0070 3/8in Test Screen Tray 1 ea 0080 1/2in Test Screen Tray 1 ea 0090 3/4in Test Screen Tray 1 ea 0110 1in Test Screen Tray 1 ea 0120 1.5in Test Screen Tray 1 ea 0130 2in Test Screen Tray 1 ea 0140 2.5in Test Screen Tray 1 ea 0150 3in Test Screen Tray 1 ea 0160 Hydrometer Bath/Gilson 1 ea 0170 Graduated Cylinders/Gilson 8 ea 0180 Hydrometers/Humboldt 16 ea 0190 Rubber Stoppers/Gilson 4 ea 0200 Dispersion Mixer/Gilson 1 ea 0230 Dispersion Cups/Gilson 2 ea 0240 Sodium Hex/Gilson 2 ea 0250 Casagrande Cups/Gilson 2 ea 0260 Fall Cone Penetrometer/Humboldt 1 ea 0270 Glass Plates/Gilson 4 ea 0280 SpG Flasks with stoppers/Humboldt 10 ea 0290 Agg. SpG Bench Set/Humboldt 1 ea 0300 Agg. SpG Basket/Humboldt 1 ea 0310 Large Pans/Gilson 10 ea 0320 Medium Pans/Gilson 10 ea 0330 Small Pans/Gilson 10 ea 0340 Small Scoops/Gilson 5 ea 0350 Medium Scoops/Gilson 5 ea 0360 Large Scoops/Gilson 5 ea 0370 Platform Pushcarts/Uline 2 ea 0380 Instrument Cart/Uline 1 ea

RFQ 140R8125Q0040 CONTINAUATION SHEET Page 10 of 65

Requirement 2 - Earthwork Construction Control Training Equipment Line Item # Description

Quantity Unit of Measure Part No. Price per unit Total

0400 Sand Cones (12-inch)/Humboldt 4 ea 0410 Proctor Hammers/Gilson 4 ea 0420 Proctor Molds (4-inch)/Gilson 4 ea 0430 Straightedges/Gilson 4 ea 0440 Sample Ejectors/Humboldt 2 ea 0450 Flow Meters/Grainger 4 ea 0460 Portable Floor Scales/Gilson 3 ea 0470 Storage Crates/Grainger 8 ea 0480 Shipping 1 ea

Requirement 2 Total Cost Grand Total

SUBMISSION OF QUESTIONS and QUOTE Submissions of Quote to this RFQ shall be sent to Kelly Cook, Contract Specialist, via email kcook@usbr.gov on or before 5pm EST January 28, 2025. All submissions shall reference “RFQ – Geotech Lab” included in the subject line.

RFQ 140R8125Q0040 CONTINAUATION SHEET Page 11 of 65

CLAUSES

52.212-4 CONTRACT TERMS AND CONDITIONS –COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (NOV 2023)

---Addendum to 52.212-4---

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

Federal Acquisition Regulation: https://www.acquisition.gov/far Department of the Interior Acquisition Regulation: https://www.acquisition.gov/diar

(End of clause)

DOI-AAAP-0028 ELECTRONIC INVOICING AND PAYMENT REQUIREMENTS-

INVOICE PROCESSING PLATFORM (IPP) (FEB 2021)

Payment requests must be submitted electronically through the U. S. Department of the Treasury's Invoice Processing Platform System (IPP).

'Payment request' means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial item contracts. The IPP website address is:

https://www.ipp.gov.

Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice:

The Contractor shall submit an electronic copy of the IPP invoice to the Chris Zurkan at czurkan@usbr.gov and obtain their signature prior to submitting to IPP.

The physical invoice signed by the COR must be included in the IPP submission.

Failure to attach the signed invoice may cause significant delay or possible rejection of your payment request.

The Contractor must use the IPP website to register access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in SAM) will receive enrollment instructions via email from the Federal Reserve Bank of St. Louis (FRBSTL) within 3 - 5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email IPPCustomerSupport@fiscal.treasury.gov or phone (866) 973-3131.

http://www.acquisition.gov/far http://www.acquisition.gov/diar http://www.ipp.gov/ mailto:czurkan@usbr.gov mailto:IPPCustomerSupport@fiscal.treasury.gov

RFQ 140R8125Q0040 CONTINAUATION SHEET Page 12 of 65

If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation.

(End of Local Clause)

--- End of Addendum to 52.212-4---

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT

STATUTES OR EXECUTIVE ORDERS—COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (MAY 2024)

The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801).

52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108- 78 ( 19 U.S.C. 3805 note)).

The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[ ] (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with

RFQ 140R8125Q0040 CONTINAUATION SHEET Page 13 of 65

Alternate I (Nov 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

[ ] (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C.

3509)).

[ ] (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

(4) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) ( 41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community—see FAR 3.900(a).

[X] (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

[ ] (6) [Reserved].

[ ] (7) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

[ ] (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

[X] (9) 52.204-27 Prohibition on a ByteDance Covered Application (JUN 2023)

(10) 52.204–28, Fe[ ]deral Acquisition Supply Chain Security Act Orders—Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (Dec 2023) ( Pub. L. 115–390, title II).

[ ] (11)(i) 52.204–30, Federal Acquisition Supply Chain Security Act Orders—Prohibition. (Dec 2023) ( Pub. L. 115–390, title II).

(ii) Alternate[ ] I (Dec 2023) of 52.204–30.

[X] (12) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Nov 2021) (31 U.S.C. 6101 note).

[ ] (13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

[ ] (14) [Reserved] [ ] (15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) (15 U.S.C.

657a).

[ ] (16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

(17) [Reserve[ ]d] [] (18) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644). [ ] (ii) Alternate I (Mar 2020) of 52.219-6.

[ ] (19) (i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644). [ ]

(ii) Alternate I (Mar 2020) of 52.219-7.

[ ](20) 52.219-8, Utilization of Small Business Concerns (FEB 2024) (15 U.S.C. 637(d)(2) and (3)). [ ] (21) (i) 52.219-9, Small Business Subcontracting Plan (Sep 2023) (15 U.S.C. 637(d)(4)).

[ ] (ii) Alternate I (Nov 2016) of 52.219-9.

[ ] (iii) Alternate II (Nov 2016) of 52.219-9. [ ] (iv) Alternate III (Jun 2020) of 52.219-9. [ ] (v) Alternate IV (Sep 2023) of 52.219-9 [ ] (22) (i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)). [ ] (ii) Alternate I (Mar 2020) of 52.219-13.

[ ](23) 52.219-14, Limitations on Subcontracting (OCT 2022) (15 U.S.C. 637(a)(14))(Deviation https://www.acquisition.gov/far/52.203-17#FAR_52_203_17 https://www.govinfo.gov/link/uscode/41/4712 https://www.acquisition.gov/far/3.900#FAR_3_900 https://www.govinfo.gov/link/plaw/115/public/390

RFQ 140R8125Q0040 CONTINAUATION SHEET Page 14 of 65

OCT

2022).

[ ] (24) 52.219-16, Liquidated Damages-Subcontracting Plan (Sep 2021) (15 U.S.C.

637(d)(4)(F)(i)).

[ ] (25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran- Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (FEB 2024) (15 U.S.C.

657f).

[] (26) (i) 52.219-28, Post Award Small Business Program Representation (Feb 2024) (15 U.S.C.

632(a)(2)).

[ ] (ii) Alternate I (MAR 2020) of 52.219-28.

[ ] (27) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Oct 2022) (15 U.S.C. 637(m)).

[ ] (28) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Oct 2022) (15 U.S.C. 637(m)).

[ ] (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) (15 U.S.C.

644(r)).

[ ] (30) 52.219-33, Nonmanufacturer Rule (Sep 2021) (15U.S.C. 637(a)(17)). [ ] (31) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

[X] (32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (FEB 2024) (E.O.13126). [ ] (33) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

[ ] (34) (i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246). [ ] (ii) Alternate I (Feb 1999) of 52.222-26.

[ ] (35) (i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212). [ ] (ii) Alternate I (Jul 2014) of 52.222-35.

[ ] (36) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C.

793). [ ] (ii) Alternate I (Jul 2014) of 52.222-36.

[ ] (37) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

[ ] (38) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

[X] (39) (i) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O.

13627).

[ ] (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

[ ] (40) 52.222-54, Employment Eligibility Verification (May 2022). (Executive Order 12989).

(Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in 22.1803.)

[ ] (41) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[ ] (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[ ](42) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential https://www.acquisition.gov/far/part-52#FAR_52_223_11

RFQ 140R8125Q0040 CONTINAUATION SHEET Page 15 of 65

Hydrofluorocarbons (May 2024) ( 42 U.S.C. 7671, et seq.).

[ ](43) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (May 2024) ( 42 U.S.C. 7671, et seq.).

[ ](44) 52.223-20, Aerosols (May 2024) ( 42 U.S.C. 7671, et seq.).

[ ](45) 52.223-21, Foams (May 2024) ( 42 U.S.C. 7671, et seq.).

[ ] (47) (i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a). [ ] (ii) Alternate I (Jan 2017) of 52.224-3.

[ ] (48) (i) 52.225-1, Buy American-Supplies (Oct 2022) (41 U.S.C. chapter 83).

[ ] (49) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C.

chapter 29 (sections 4501-4732), Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

[ ] (ii) Alternate I [Reserved].

[ ] (iii) Alternate II (Dec 2022) of 52.225-3.

[ ] (iv) Alternate III (NOV 2023) of 52.225-3.

[ ] (50) 52.225-5, Trade Agreements (NOV 2023) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

[ ] (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

[ ] (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

[ ] (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

[ ] (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

[ ](55) 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024) ( E.O. 13513).

[ ] (56) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021).

[ ] (57) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

[ ] (58) 52.232-30, Installment Payments for Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

[X] (59) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct 2018) (31 U.S.C. 3332).

[ ] (60) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).

[ ] (61) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

[ ] (62) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

[ ] (63) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(13)).

[ ] (64) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) (46 U.S.C. 55305 and 10 U.S.C. 2631).

[ ] (ii) Alternate I (Apr 2003) of 52.247-64.

[ ] (iii) Alternate II (Nov 2021) of 52.247-64.

The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to https://www.govinfo.gov/link/uscode/42/7671 https://www.acquisition.gov/far/part-52#FAR_52_223_12 https://www.govinfo.gov/link/uscode/42/7671 https://www.acquisition.gov/far/part-52#FAR_52_223_20 https://www.govinfo.gov/link/uscode/42/7671 https://www.acquisition.gov/far/part-52#FAR_52_223_21 https://www.govinfo.gov/link/uscode/42/7671 https://www.acquisition.gov/far/part-52#FAR_52_226_8 https://www.federalregister.gov/executive-order/13513

RFQ 140R8125Q0040 CONTINAUATION SHEET Page 16 of 65 commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[ ] (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter67).

[ ] (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

This Statement is for Information Only: It is not a Wage Determination Employee Class Monetary Wage-Fringe Benefits

[List as necessary] [ ] (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

[ ] (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.C. chapter 67).

[ ] (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

[ ] (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

[ ] (7) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022). [ ] (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O.

13706).

[ ] (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792).

Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to

RFQ 140R8125Q0040 CONTINAUATION SHEET Page 17 of 65 create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1), in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) ( 41 U.S.C. 3509).

52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) ( 41 U.S.C. 4712).

52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

(A) 52.204–30, Federal Acquisition Supply Chain Security Act Orders—Prohibition. (Dec 2023) ( Pub. L. 115–390, title II).

(B) Alternate I (Dec 2023) of 52.204–30.

52.219-8, Utilization of Small Business Concerns (Feb 2024) ( 15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

52.222-21, Prohibition of Segregated Facilities (Apr 2015).

52.222-26, Equal Opportunity (Sep 2015) (E.O.11246).

52.222-35, Equal Opportunity for Veterans (Jun 2020) ( 38 U.S.C. 4212).

52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) ( 29 U.S.C. 793).

52.222-37, Employment Reports on Veterans (Jun 2020) ( 38 U.S.C. 4212).

52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

52.222-41, Service Contract Labor Standards (Aug 2018) ( 41 U.S.C. chapter 67).

(A) 52.222-50, Combating Trafficking in Persons (Nov 2021) ( 22 U.S.C. chapter 78 and E.O 13627).

(B) Alternate I (Mar 2015) of 52.222-50 ( 22 U.S.C. chapter 78 and E.O. 13627).

52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) ( 41 U.S.C.

chapter 67).

52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) ( 41 U.S.C. chapter 67).

52.222-54, Employment Eligibility Verification (May 2022) (E.O. 12989).

52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022).

52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

(A) 52.224-3, Privacy Training (Jan 2017) ( 5 U.S.C. 552a).

RFQ 140R8125Q0040 CONTINAUATION SHEET Page 18 of 65

(B) Alternate I (Jan 2017) of 52.224-3.

52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008;

10 U.S.C. Subtitle A, Part V, Subpart G Note).

52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) ( 42 U.S.C.

1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801). Flow down required in accordance with paragraph (c) of 52.232-40.

52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) ( 46 U.S.C. 55305 and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247- 64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

**END OF CLAUSES**

RFQ 140R8125Q0040 CONTINAUATION SHEET Page 19 of 65

STATEMENT OF WORK

Title: Geotech Lab– Soil & Rock Physical Properties Testing Equipment and Earthwork Construction Control Training Equipment

1.0 Scope

In accordance with FAR 52.211-6 the following items should be quoted as brand name or equal.

The scope of this work is to acquire commercially available equipment capable of determining:

• Soil and aggregate particle size (gradation)

• Soil Plasticity

• Soil Specific Gravity

• Aggregate Specific Gravity

• In-place density of construction materials through the Sand Cone Density test and the

Ring Density test

• Maximum index density and optimum water content of construction materials through the Standard Proctor Compaction test

GLFS requires specialized laboratory equipment to replace its outdated inventory and to support the expansion of its training capabilities. This specialized equipment is identified below;

photographs of some of this equipment are also provided for clarity.

CLIN 0010 - The Clean-N-Weigh Table shall be the item manufactured by Gilson Company, Inc. Model No. TSA-167 to be compatible in replacing Reclamation’s existing equipment, and shall include the following:

Quantity: EA - One (1)

Specification Requirements:

• Clean-N-Weigh Accessory,

• 30.5 x 19.5 x 30.5 inches (775 x 495 x 775 mm) (W x D x H),

• Painted-steel construction,

• Hopper assembly,

• Legs and end brace,

• Adjustable scale & pan support shelf,

• Adjustable leveling feet, RFQ 140R8125Q0040 CONTINAUATION SHEET Page 20 of 65

• Screws, nuts and washers,

• Chute-End Handling Pan shall be the item manufactured by Gilson Company, Inc.

Model No. TSA-162, and shall include the following:

o Steel Material Handling Pan, o 39-qt (37-L) capacity, o 15 x 30 x 4 inches (381 x 762 x 102 mm) (W x D x H), o Painted and welded heavy-gauge steel, o End flanges for lifting, o Chute end and swing-down handle, o Suitable for use in drying ovens, and o Estimated shipping weight of 15.0 lbs (6.80 kg).

• Coarse Screen Tray Brush shall be the item manufactured by Gilson Company, Inc.

Model No. TSA-171, and shall include the following:

o Coarse Screen Tray Brush, o 13-inch (330 mm) curved wooden handle, o Slanted fine (0.005) brass wire bristles, o 5.5 x 3/4-inch (138 x 19-mm) bristle area, and o Estimated shipping weight of 2.0 lbs (0.91 kg).

• Estimated total shipping weight of 63.0 lbs (28.58 kg).

CLIN 0020 - 6-Tray Testing Screen Shaker shall be the item manufactured by Gilson Company, Inc. Model No. TS-1 to be compatible in replacing Reclamation’s existing equipment, and shall include the following:

Quantity: EA-One (1)

Specification Requirements:

• Gilson Testing Screen,

• Hydraulic Clamping,

• 6-Tray Capacity (5 Screen Tray slots plus 1 Dustpan),

• 23 x 31 x 43 inches (584 x 787 x 1,092 mm) (W x D x H),

• Maximum sample volume of 1 ft3 (28.3 L),

• Aggregate size range of 4 inches (101 mm) to No. 4 (4.75 mm).

• Operates on 115V/60 Hz, 9.2 amps,

• ½ hp capacitor-type universal motor,

• Operates at 1725 rpm,

• Maximum operating temperature of 104°F (40°C),

• Shell Tellus 25 or Mobile AW 32 hydraulic oil,

• Enclosed drive mechanism,

• Starting switch with overload protection,

• Vertical vibration,

• Compatible with removable Screen Trays and Dustpans, RFQ 140R8125Q0040 CONTINAUATION SHEET Page 21 of 65

• Designed to be floor-mounted, and

• Estimated total shipping weight of 405.0 lbs (183.71 kg).

CLIN 0030 - Door Enclosure for TS-1 shall be the item manufactured by Gilson Company, Inc. Model No. TSA-157 to be compatible in replacing Reclamation’s existing equipment, and shall include the following:

Quantity: EA - One (1)

Specification Requirements:

• Door Enclosure to TS-1 / TS-2 Testing Screens,

• Lightweight, easy to remove,

• Fiberboard,

• Fill-with hinge,

• Sound-deadening liner,

• Permanent magnets,

• Flat,

• Product Dimensions: 45.75 x 21 x 0.625 inches (1,163 x 533 x 16 mm) (W x D x H), and

• Estimated total shipping weight of 15.0 lbs (6.80 kg).

CLIN 0040 - Standard Dustpan shall be the item manufactured by Gilson Company, Inc.

Model No. TSA-112 to be compatible in replacing Reclamation’s existing equipment, and shall include the following:

Quantity: EA - One (1)

Specification Requirements:

• Standard Dustpan,

• Used with Gilson Testing Screen models TS-1, TS-2, and TS-3, as well as Gilson

Test-Master models TM-5 and TM-6,

• To collect and handle fines during the separation of construction aggregates and other materials,

• Rugged and durable construction,

• 1.6 inches deep,

• Full Tray,

• Product Dimensions: 17.75 x 26.25 x 2 inches (450.85 x 666.75 x 50.8 mm) (W x D x

H), and

• Estimated total shipping weight of 15.0 lbs (6.80 kg).

RFQ 140R8125Q0040 CONTINAUATION SHEET Page 22 of 65

CLIN 0050 - No. 12 Test Screen Tray shall be the item manufactured by Gilson Company, Inc.

Model No. TSA-101 #12 to be compatible in replacing Reclamation’s existing equipment, and shall include the following:

Quantity: EA - One (1)

Specification Requirements:

• No. 12 (1.7 mm) Testing Screen Tray,

• Compliance Grade ASTM E11 Wire Cloth,

• Welded and bolted heavy gauge painted steel construction,

• Designed for use in Gilson Testing Screen and Test-Master models,

• Serial Number,

• Stainless steel,

• Full tray,

• ASTM E11 Opening Size: No. 12 (1.7 mm),

• Clear Screen Size of Trays: 14.75 x 22.75 inches (375 x 578 mm) (W x D),

• Cloth Dimensions: 16 x 24 inches (406 x 610 mm) (W x D),

• Product Dimensions: 17.75 x 26.25 x 2.625 inches (451 x 667 x 67 mm) (W x D x H), and

• Estimated total shipping weight of 18.0 lbs (8.16 kg).

This equipment must meet specifications identified in ASTM E11.

CLIN 0060 - 4 Test Screen Tray shall be the item manufactured by Gilson Company, Inc.

Model No. TSA-100 #4 to be compatible in replacing Reclamation’s existing equipment, and shall include the following:

Quantity: EA - One (1)

Specification Requirements:

• No. 4 (4.75 mm) Testing Screen Tray,

• Compliance Grade ASTM E11 Wire Cloth,

• Welded and bolted heavy gauge painted steel construction,

• Designed for use in Gilson Testing Screen and Test-Master models,

• Serial Number,

• Stainless steel,

• Full tray,

• ASTM E11 Opening Size: No. 4 (4.75 mm),

• Clear Screen Size of Trays: 14.75 x 22.75 inches (375 x 578 mm) (W x D),

• Cloth Dimensions: 16 x 24 inches (406 x 610 mm) (W x D),

• Product Dimensions: 17.75 x 26.25 x 2.625 inches (451 x 667 x 67 mm) (W x D x H), and

RFQ 140R8125Q0040 CONTINAUATION SHEET Page 23 of 65

• Estimated total shipping weight of 18.0 lbs (8.16 kg).

This equipment must meet specifications identified in ASTM E11.

CLIN 0070 - 3/8in Test Screen Tray shall be the item manufactured by Gilson Company, Inc.

Model No. TSA-100 3/8” to be compatible in replacing Reclamation’s existing equipment, and shall include the following:

Quantity: EA - One (1)

Specification Requirements:

• 3/8” (9.5 mm) Testing Screen Tray,

• Compliance Grade ASTM E11 Wire Cloth,

• Welded and bolted heavy gauge painted steel construction,

• Designed for use in Gilson Testing Screen and Test-Master models,

• Serial Number,

• Stainless steel,

• Full tray,

• ASTM E11 Opening Size: 3/8in (9.5 mm),

• Clear Screen Size of Trays: 14.75 x 22.75 inches (375 x 578 mm) (W x D),

• Cloth Dimensions: 16 x 24 inches (406 x 610 mm) (W x D),

• Product Dimensions: 17.75 x 26.25 x 2.625 inches (451 x 667 x 67 mm) (W x D x H), and

• Estimated total shipping weight of 18.0 lbs (8.16 kg).

This equipment must meet specifications identified in ASTM E11.

CLIN 00080 - 1/2in Test Screen Tray shall be the item manufactured by Gilson Company, Inc.

Model No. TSA-100 1/2” to be compatible in replacing Reclamation’s existing equipment, and shall include the following:

Quantity: EA - One (1)

Specification Requirements:

• 1/2” (12.5 mm) Testing Screen Tray,

• Compliance Grade ASTM E11 Wire Cloth,

• Welded and bolted heavy gauge painted steel construction,

• Designed for use in Gilson Testing Screen and Test-Master models,

• Serial Number,

• Stainless steel,

• Full tray,

• ASTM E11 Opening Size: 1/2in (12.5 mm), RFQ 140R8125Q0040 CONTINAUATION SHEET Page 24 of 65

• Clear Screen Size of Trays: 14.75 x 22.75 inches (375 x 578 mm) (W x D),

• Cloth Dimensions: 16 x 24 inches (406 x 610 mm) (W x D),

• Product Dimensions: 17.75 x 26.25 x 2.625 inches (451 x 667 x 67 mm) (W x D x H), and

• Estimated total shipping weight of 18.0 lbs (8.16 kg).

This equipment must meet specifications identified in ASTM E11.

CLIN 00090 - 3/4in Test Screen Tray shall be the item manufactured by Gilson Company, Inc.

Model No. TSA-100 3/4” to be compatible in replacing Reclamation’s existing equipment, and shall include the following:

Quantity: EA - One (1)

Specification Requirements:

• 3/4” (19.0 mm) Testing Screen Tray,

• Compliance Grade ASTM E11 Wire Cloth,

• Welded and bolted heavy gauge painted steel construction,

• Designed for use in Gilson Testing Screen and Test-Master models,

• Serial Number,

• Stainless steel,

• Full tray,

• ASTM E11 Opening Size: 3/4in (19.0 mm),

• Clear Screen Size of Trays: 14.75 x 22.75 inches (375 x 578 mm) (W x D),

• Cloth Dimensions: 16 x 24 inches (406 x 610 mm) (W x D),

• Product Dimensions: 17.75 x 26.25 x 2.625 inches (451 x 667 x 67 mm) (W x D x H), and

• Estimated total shipping weight of 18.0 lbs (8.16 kg).

This equipment must meet specifications identified in ASTM E11.

CLIN 00100 - 1in Test Screen Tray shall be the item manufactured by Gilson Company, Inc.

Model No. TSA-100 1” to be compatible in replacing Reclamation’s existing equipment, and shall include the following:

Quantity: EA - One (1)

Specification Requirements:

• 1” (25.0 mm) Testing Screen Tray,

• Compliance Grade ASTM E11 Wire Cloth,

• Welded and bolted heavy gauge painted steel construction,

• Designed for use in Gilson Testing Screen and Test-Master models,

• Serial Number, RFQ 140R8125Q0040 CONTINAUATION SHEET Page 25 of 65

• Stainless steel,

• Full tray,

• ASTM E11 Opening Size: 1in (25.0 mm),

• Clear Screen Size of Trays: 14.75 x 22.75 inches (375 x 578 mm) (W x D),

• Cloth Dimensions: 16 x 24 inches (406 x 610 mm) (W x D),

• Product Dimensions: 17.75 x 26.25 x 2.625 inches (451 x 667 x 67 mm) (W x D x H), and

• Estimated total shipping weight of 18.0 lbs (8.16 kg).

This equipment must meet specifications identified in ASTM E11.

CLIN 00110 - 1.5in Test Screen Tray shall be the item manufactured by Gilson Company, Inc.

Model No. TSA-100 1-1/2” to be compatible in replacing Reclamation’s existing equipment, and shall include the following:

Quantity: EA - One (1)

Specification Requirements:

• 1-1/2” (37.5 mm) Testing Screen Tray,

• Compliance Grade ASTM E11 Wire Cloth,

• Welded and bolted heavy gauge painted steel construction,

• Designed for use in Gilson Testing Screen and Test-Master models,

• Serial Number,

• Stainless steel,

• Full tray,

• ASTM E11 Opening Size: 1-1/2in (37.5 mm),

• Clear Screen Size of Trays: 14.75 x 22.75 inches (375 x 578 mm) (W x D),

• Cloth Dimensions: 16 x 24 inches (406 x 610 mm) (W x D),

• Product Dimensions: 17.75 x 26.25 x 2.625 inches (451 x 667 x 67 mm) (W x D x H), and

• Estimated total shipping weight of 18.0 lbs (8.16 kg).

This equipment must meet specifications identified in ASTM E11.

CLIN 0120 - 2in Test Screen Tray shall be the item manufactured by Gilson Company, Inc.

Model No. TSA-100 2” to be compatible in replacing Reclamation’s existing equipment, and shall include the following:

Quantity: EA - One (1)

Specification Requirements:

• 2” (50.0 mm) Testing Screen Tray,

• Compliance Grade ASTM E11 Wire Cloth, RFQ 140R8125Q0040 CONTINAUATION SHEET Page 26 of 65

• Welded and bolted heavy gauge painted steel construction,

• Designed for use in Gilson Testing Screen and Test-Master models,

• Serial Number,

• Stainless steel,

• Full tray,

• ASTM E11 Opening Size: 2in (50.0 mm),

• Clear Screen Size of Trays: 14.75 x 22.75 inches (375 x 578 mm) (W x D),

• Cloth Dimensions: 16 x 24 inches (406 x 610 mm) (W x D),

• Product Dimensions: 17.75 x 26.25 x 2.625 inches (451 x 667 x 67 mm) (W x D x H), and

• Estimated total shipping weight of 18.0 lbs (8.16 kg).

This equipment must meet specifications identified in ASTM E11.

CLIN 00130 - 2.5in Test Screen Tray shall be the item manufactured by Gilson Company, Inc.

Model No. TSA-100 2-1/2” to be compatible in replacing Reclamation’s existing equipment, and shall include the following:

Quantity: EA - One (1)

Specification Requirements:

• 2-1/2” (63.0 mm) Testing Screen Tray,

• Compliance Grade ASTM E11 Wire Cloth,

• Welded and bolted heavy gauge painted steel construction,

• Designed for use in Gilson Testing Screen and Test-Master models,

• Serial Number,

• Stainless steel,

• Full tray,

• ASTM E11 Opening Size: 2-1/2in (63.0 mm),

• Clear Screen Size of Trays: 14.75 x 22.75 inches (375 x 578 mm) (W x D),

• Cloth Dimensions: 16 x 24 inches (406 x 610 mm) (W x D),

• Product Dimensions: 17.75 x 26.25 x 2.625 inches (451 x 667 x 67 mm) (W x D x H), and

• Estimated total shipping weight of 18.0 lbs (8.16 kg).

This equipment must meet specifications identified in ASTM E11.

CLIN 00140 - 3in Test Screen Tray shall be the item manufactured by Gilson Company, Inc.

Model No. TSA-100 3” to be compatible in replacing Reclamation’s existing equipment, and shall include the following:

Quantity: EA One (1)

RFQ 140R8125Q0040 CONTINAUATION SHEET Page 27 of 65

Specification Requirements:

• 3” (75.0 mm) Testing Screen Tray,

• Compliance Grade ASTM E11 Wire Cloth,

• Welded and bolted heavy gauge painted steel construction,

• Designed for use in Gilson Testing Screen and Test-Master models,

• Serial Number,

• Stainless steel,

• Full tray,

• ASTM E11 Opening Size: 3in (75.0 mm),

• Clear Screen Size of Trays: 14.75 x 22.75 inches (375 x 578 mm) (W x D),

• Cloth Dimensions: 16 x 24 inches (406 x 610 mm) (W x D),

• Product Dimensions: 17.75 x 26.25 x 2.625 inches (451 x 667 x 67 mm) (W x D x H), and

• Estimated total shipping weight of 18.0 lbs (8.16 kg).

This equipment must meet specifications identified in ASTM E11.

CLIN 00150 - Hydrometer Bath shall be the item manufactured by Gilson Company, Inc.

Model No. SA-25 to be compatible in replacing Reclamation’s existing equipment, and shall include the following:

Quantity: EA - One (1)

Specification Requirements:

• Constant Temperature Bath,

• 20.5-gal (77.6-L) capacity,

• Inside dimensions of 37 x 8 x 16 inches (940 x 203 x 406 mm) (L x W x D),

• Outside dimensions of 48 x 11 x 19 inches (1,220 x 280 x 483 mm) (L x W x D),

• Operates on 110V, 50/60 Hz, 13 amps,

• Maintain temperature uniformity at 68°F (20°C) ± 0.5°C,

• Enameled steel exterior,

• Stainless-steel interior parts,

• Built-in brackets to secure up to eight (8) Soil Sedimentation Cylinders,

• Over-temperature safety cutoff mechanism, and

• Estimated shipping weight of 47.0 lbs (21.32 kg).

This equipment must meet specifications identified in ASTM D422 and D7928.

CLIN 00160 - Graduated Cylinders shall be the item manufactured by Gilson Company, Inc.

Model No. SA-5 to be compatible in replacing Reclamation’s existing equipment, and shall include the following:

RFQ 140R8125Q0040 CONTINAUATION SHEET Page 28 of 65

Quantity: EA - Eight (8)

Specification Requirements:

• Soil Sedimentation Cylinder (Hydrometer Jar),

• 1,000 mL capacity,

• 2.5 x 18 inches (64 x 47 mm) (Dia x H),

• 1,000 mL indicating line,

• Heavily-wall clear glass, and

• Estimated shipping weight of 4.0 lbs (1.81 kg) each.

This equipment must meet specifications identified in ASTM D422 and D7928.

CLIN 00170- Hydrometers shall be the item manufactured by Humboldt Mfg. Part No. H- 4241 to be compatible in replacing Reclamation’s existing equipment, and shall include the following:

Quantity: EA Sixteen (16)

Specification Requirements:

• Soil Hydrometer A,

• ASTM 152 H scale,

• 11 inches (280 mm) (L),

• Graduated to read in grams per liter (g/L),

• Range of -5 to +60 g/L,

• 1 g/L divisions at 68°F (20°C), and

• Estimated shipping weight of 2.0 lbs (0.91 kg) each.

This equipment must meet specifications identified in ASTM D422 and D7928.

CLIN 00180 - Rubber Stoppers shall be the item manufactured by Gilson Company, Inc.

Model No. GWA-512 to be compatible in replacing Reclamation’s existing equipment, and shall include the following:

Quantity: EA - Four (4)

Specification Requirements:

• No. 12 Rubber Stopper,

• 0.98 inch (24.9 mm) (H),

• Top = 2.50 inches (63.5 mm) (Dia), Bottom = 2.13 inches (54 mm) (Dia), and

• Estimated shipping weight of 0.5 lbs (0.23 kg) each.

RFQ 140R8125Q0040 CONTINAUATION SHEET Page 29 of 65

CLIN 00190 - Dispersion Mixer shall be the item manufactured by Gilson Company, Inc.

Model No. SA-14 to be compatible in replacing Reclamation’s existing equipment, and shall include the following:

Quantity: EA - One (1)

Specification Requirements:

• Soil Dispersion Mixer,

• 6.5 x 6.75 x 20.5 inches (165 x 171 x 521 mm) (W x D x H),

• Operates on 115 V/60 Hz, 7.5 Amps,

• 1/3 hp motor,

• Selectable 13,000, 16,000 and 18,000 rpm speeds,

• Manual pulse switch,

• Heavy die-cast aluminum housing and durable spindle,

• Stainless-steel baffled dispersion cup,

• Four sets of internal baffles, and

• Estimated shipping weight of 17.0 lbs (7.71 kg).

This equipment must meet specifications identified in ASTM D422 and D7928.

CLIN 00200 - Dispersion Cups shall be the item manufactured by Gilson Company, Inc.

Model No. SA-16 to be compatible in replacing Reclamation’s existing equipment, and shall include the following:

Quantity: EA -Two (2)

Specification Requirements:

• Dispersion Cup,

• 29-oz (0.85-L) capacity,

• 4 x 7 inches (102 x 178 mm) (Dia x H),

• Stainless-steel construction,

• Stainless-steel baffles, and

• Estimated shipping weight of 1.0 lbs (0.45 kg) each.

This equipment must meet specifications identified in ASTM D422 and D7928.

CLIN 00210 - Sodium Hexametaphosphate shall be the item manufactured by Gilson Company, Inc. Model No. SA-20C to be compatible in replacing Reclamation’s existing equipment, and shall include the following:

Quantity: EA - Two (2)

RFQ 140R8125Q0040 CONTINAUATION SHEET Page 30 of 65

• Sodium Hexametaphosphate,

• 1-lb (0.45-kg) bottles,

• Package of 6,…