Amendment_0001_0001.docx
DOCX document 20 KB Posted
- Attached to
- 3D OPTICAL PROFILOMETER Federal contract opportunity
- Solicitation number
- 140R8123Q0261
About this file
This is an amendment to a solicitation for a 3D optical profilometer issued by the Department of the Interior Bureau of Reclamation. The amendment provides responses to questions received from potential offerors to clarify requirements. It modifies the statement of work to specify that the system must be capable of scanning areas up to 250 mm x 100 mm with height variations ranging from 1 micrometer to 25 mm in under four minutes while maintaining 100 nm resolution or better. It also extends the solicitation closing date to September 18, 2023. The amendment maintains all other terms and conditions of the original solicitation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sol_140R8123Q0261_Amd_0001.pdf | ||
| Sol_140R8123Q0261.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
140R8123Q0261 Amendment 0001 Page 2 of 2
The purpose of this Amendment is to respond to questions received during the solicitation period, include additional language to clarify the requirement, and to extend solicitation period.
A) Questions & Responses
1. ROTATIONAL ACCESSSORY: Can you please define rotational accessory? I am assuming a rotary device that is parallel to the x or y axis but I do not want to make any assumptions? If this is the case, do you need accessories for fixturing to the spindle or are you thinking just a standard chuck attachment?
Response: System must be capable of scanning areas up to 250 mm x 100 mm with height variations ranging from 1 micrometer to 25 mm in under four minutes while maintaining 100 nm resolution or better.
2. 100 MM spacer accessory - can you please define your exact wishes for this spacer?
Response: See 2.6.1
3. Can you please share a little bit about your application as I may be able to offer an option that will perform the same as a high resolution camera sensor for a fraction of the price depending on your application and your needs.
Response: System must be capable of scanning areas up to 250 mm x 100 mm with height variations ranging from 1 micrometer to 25 mm in under four minutes while maintaining 100 nm resolution or better. Also, see 2.2.6.
B) The Following paragraphs highlighted in red were made to the STATEMENT OF WORK / SPECIFICATIONS:
1) Added paragraph 2.2.7 under CLIN 010: 3D Optical Profilometer Measurement Head to read as follows:
2.2.7 System must be capable of scanning areas up to 250 mm x 100 mm with height variations ranging from 1 micrometer to 25 mm in under four minutes while maintaining 100 nm resolution or better.
2) Added Paragraph 2.5.1 under CLIN 040 - Motorized Rotation Accessory to read as follows:
2.5.1 System must be capable of scanning areas up to 250 mm x 100 mm with height variations ranging from 1 micrometer to 25 mm in under four minutes while maintaining 100 nm resolution or better.
C) Extend the solicitation period to close at 12pm MDT on September 18, 2023.
All other terms and conditions shall remain the same.
File details come from the government source that posted it. Updated .