Combined_Synopsis_Solicitation_140R2019Q0081.pdf

Combined Synopsis/Solicitation

BUREAU OF RECLAMATION, MID-PACIFIC REGION

SACRAMENTO, CALIFORNIA

140R2019Q0081

COMBINED SYNOPSIS/SOLICITATION

Endeavor Engine Maintenance Services Bay Delta Office (BDO) – Sacramento, California

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with FAR part 13.5 and additional information included in this notice. The Bureau of Reclamation intends to award a Firm Fixed Price type of procurement, in response to this solicitation. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This requirement is being solicited as 100% Set Aside for Small Business and will be award on a Best Value basis in accordance with FAR 13.106-2(b)(3) Evaluation of quotations of offers, and in accordance with FAR 15.101-1 Tradeoff process.

GENERAL INFORMATION

RFP Number: 140R2019Q0081

Request for Quotation (RFQ) Request for Proposal (RFP) Invitation for Bid (IFB)

North American Industry Classification Code (NAICS): 336611 Size Standard: 1,250 employee

100% Set Aside for Small Businesses

Proposal are due April 18, 2019 at 10:00am PST to kfleming@usbr.gov

Pricing Schedule

Endeavor Engine Maintenance Dated: March 29, 2019

Base Year – Contractor shall furnish all labor, materials, supplies, tools, equipment, transportation and supervision necessary to perform the following Endeavor Engine Maintenance in accordance all Clauses and the Performance Work Statement.

Period of Performance:

Total for Each Task Grand Total for the Year

Task 1 – Initial Service Task 2 – 200 Hour Quick Service (Mains & Generator) Task 3 – Mains 500 Hour Service Task 4 – Mains Overhead Set (Add-On) Task 5 – Mains Cooling System Flush (Add-On) Tash 6 – Transmission Service (Add-On) Task 7 – Generator 400 Hour Service Task 8 – Generator 2500 Hour Service (Add-On) Task 9 – Multi-Point Vessel Inspection Task 10 – Vessel Sea Trial

Total

Option Year 1 – Contractor shall furnish all labor, materials, supplies, tools, equipment, transportation and supervision necessary to perform the following Endeavor

Total for Each Task Grand Total for the Year

PRICING SCHEDULE

mailto:kfleming@usbr.gov

Engine Maintenance in accordance all Clauses and the Performance Work Statement.

Period of Performance:

Task 1 – Initial Service Task 2 – 200 Hour Quick Service (Mains & Generator) Task 3 – Mains 500 Hour Service Task 4 – Mains Overhead Set (Add-On) Task 5 – Mains Cooling System Flush (Add-On) Tash 6 – Transmission Service (Add-On) Task 7 – Generator 400 Hour Service Task 8 – Generator 2500 Hour Service (Add-On) Task 9 – Multi-Point Vessel Inspection Task 10 – Vessel Sea Trial

Total

Option Year 2 – Contractor shall furnish all labor, materials, supplies, tools, equipment, transportation and supervision necessary to perform the following Endeavor Engine Maintenance in accordance all Clauses and the Performance Work Statement.

Period of Performance:

Total for Each Task Grand Total for the Year

Task 1 – Initial Service Task 2 – 200 Hour Quick Service (Mains & Generator) Task 3 – Mains 500 Hour Service Task 4 – Mains Overhead Set (Add-On) Task 5 – Mains Cooling System Flush (Add-On) Tash 6 – Transmission Service (Add-On) Task 7 – Generator 400 Hour Service Task 8 – Generator 2500 Hour Service (Add-On) Task 9 – Multi-Point Vessel Inspection Task 10 – Vessel Sea Trial

Total

Option Year 3 – Contractor shall furnish all labor, materials, supplies, tools, equipment, transportation and supervision necessary to perform the following Endeavor Engine Maintenance in accordance all Clauses and the Performance Work Statement.

Period of Performance:

Total for Each Task Grand Total for the Year

Task 1 – Initial Service Task 2 – 200 Hour Quick Service (Mains & Generator) Task 3 – Mains 500 Hour Service Task 4 – Mains Overhead Set (Add-On) Task 5 – Mains Cooling System Flush (Add-On) Tash 6 – Transmission Service (Add-On) Task 7 – Generator 400 Hour Service Task 8 – Generator 2500 Hour Service (Add-On) Task 9 – Multi-Point Vessel Inspection Task 10 – Vessel Sea Trial

Total

Option Year 4 – Contractor shall furnish all labor, materials, supplies, tools, equipment, transportation and supervision necessary to perform the following Endeavor Engine Maintenance in accordance all Clauses and the Performance Work Statement.

Period of Performance:

Total for Each Task Grand Total for the Year

Task 1 – Initial Service Task 2 – 200 Hour Quick Service (Mains & Generator) Task 3 – Mains 500 Hour Service Task 4 – Mains Overhead Set (Add-On) Task 5 – Mains Cooling System Flush (Add-On) Tash 6 – Transmission Service (Add-On) Task 7 – Generator 400 Hour Service Task 8 – Generator 2500 Hour Service (Add-On) Task 9 – Multi-Point Vessel Inspection Task 10 – Vessel Sea Trial

Total

Grand Total for Base Year and All Option Years

Offeror’s Business Information:

Business Name: _______________________________

Authorized Agent’s Signature/Date: _______________________________

DUNS Number/Cage Code: ______________________

Tax ID Number: _______________________________

Business Size (select one): Large Small

APPLICABLE WAGE DETERMINATION:

Wage Determination No.: 2015-5631 Revision No.: 8 Date of Revision: 12/26/2018

This document can be viewed at: http://www.wdol.gov

Please see further instructions for quotation submission under Provision 52.212-1 Addendum and 52.212-2 on page 39 of this document.

Documents necessary for quotation submission are as follows:

1. Completed and signed Pages 2 through 5 of this document

2. Completed Technical, Past Performance and Price Evaluation (FAR 52.212-2).

3. Information required in FAR 52.212-1 and/or 52.212-2

4. Pricing Schedule.

http://www.wdol.gov/

Performance Work Statement Endeavor Engine Maintenance

Dated: March 29, 2019

1. Background

Reclamation conducts environmental monitoring throughout the San Francisco Bay and Delta utilizing the vessel “R/V Endeavor.” Endeavor is a 50-foot, 1973 Delta Marine Charter boat, powered by twin Cummins QSB 6.7 inboard diesels, Twin Disc MGX5075A transmissions and a Northern Lights M773LW3 generator. The engines, transmissions and generator were installed in the winter of 2018.

2. Scope

The contractor shall perform engine, transmission and generator maintenance required to sustain the equipment within manufacturer’s performance specifications. Maintenance shall include service to any systems integral to the operation of the engines, transmissions and generator including, drive shaft, propellers, electrical system, hydraulic system, fuel system, water intake system, air intake system, and hull structure at the location where the items are installed.

3. Type of Contract

The Government intends to award a Firm Fixed Price type of contract.

4. Period of Performance

The anticipated period of performance shall be for one Base Year of 12 months and four (4) 12-month Option Years. The Period of Performance shall read as follows:

Base Year April 1, 2019 through March 31, 2020 Option Year 1 April 1, 2020 through March 31, 2021 Option Year 2 April 1, 2021 through March 31, 2022 Option Year 3 April 1, 2022 through March 31, 2023 Option Year 4 April 1, 2023 through March 31, 2024

5. Administrative Information:

5.1 Recognized Holidays:

New Year’s Day Labor Day Martin Luther King Jr.’s Birthday Columbus Day President’s Day Veteran’s Day Memorial Day Thanksgiving Day Independence Day Christmas Day

5.2 Hours of Operations:

The contractor is responsible for conducting business, between the hours of 8 a.m. and 5 p.m. Monday thru Friday except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. For other than firm fixed price contracts, the contractor will not be reimbursed when the government facility is closed for the above reasons. The Contractor must at all times maintain an adequate workforce

PERFORMANCE WORK STATEMENT

for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons. When hiring personnel, the Contractor shall keep in mind that the stability and continuity of the workforce are essential.

5.3. Place of Performance:

The work to be performed under this contract will be performed at a combination of the contractor’s facility and the vessel’s home port.

Mark’s New Bridge Marina LLC 6325 Bridgehead Road Antioch, CA 94509 Dock “J” End Tie

5.3.1 The following Task will be performed at the Contractor’s Facility:

• Task 1 – Initial Service

• Task 3 – Mains 500 Hour Service

• Task 4 – Mains Overhead Set (Add-On)

• Task 5 – Mains Cooling System Flush (Add-On)

• Task 6 – Transmission Service (Add-On)

• Task 7 – Generator 400 Hour Service

• Task 8 – Generator 2500 Hour Service (Add-On)

• Task 9 – Multi-Point Vessel Inspection

• Task 10 – Vessel Sea Trial

For tasks to be performed at the contractor’s facility, the vessel will be made available for contractor haul out and/or transportation, if necessary. The Government is unable to transport the vessel by land and is only to transport up to 60 miles per water from Mark’s New Bridge Marina in Antioch, under the vessel’s own power. No modifications will be made to the vessel to aid in transportation to the contractor’s facility. Once the vessel has arrived at the contractor’s facility, it is expected that the vessel will remain on site until the scheduled tasks have been completed.

5.3.2 The following Task will be performed at the vessel’s home Port:

• Task 2 – 200 Hours Quick Service (Mains and Generator)

5.4. Security:

The Contractor and the Contractors personnel performing work under this contract must be responsible for the safeguarding of all Government equipment, information, and property provided for contractor use and must maintain the level of security required for the life of the contract.

5.5. Delivery Schedule:

The following deliverables are checklists that shall serve as records of maintenance and inspections performed on the vessel.

Each time the vessel is serviced by the contractor, the contractor shall provide a copy of the completed applicable checklist to the Government. The contractor is responsible for providing a blank copy of the checklist to the contractor’s technician or inspector for completion during service or inspection. The Contractor may change the checklists, as long as it is approved by the Government. Electronic copies of the checklists can be provided to the contractor in PDF and MS Excel format when requested by the contractor. Please see exhibits.

Task Number

Type of Service Checklist Information

Task 1 Initial Service Initial Service Checklist:

The original hard copy shall be provided to the Government representative at the time of final inspection for the completed applicable task or the vessel’s return to service.

Task 2 200 Hour Quick Service

200 Hour Quick Service Checklist:

The original hard copy shall be provided to the Government representative at the time of final inspection for the completed applicable task or vessel’s return to service.

Task 3 Mains 500 Hour Service

Mains 500 Hour Service Checklist:

The original hard copy shall be provided to the Government representative at the time of final inspection for the completed applicable task or the vessel’s return to service.

Task 4 Mains Overhead Set (Add-On)

Mains 500 Hour Service Checklist:

The original hard copy shall be provided to the Government representative at the time of final inspection for the completed applicable task or the vessel’s return to service.

Task 5 Mains Cooling System Flush (Add-On)

Mains 500 Hour Service Checklist:

The original hard copy shall be provided to the Government representative at the time of final inspection for the completed applicable task or the vessel’s return to service.

Task 6 Transmission Service

Mains 500 Hour Service Checklist:

The original hard copy shall be provided to the Government representative at the time of final inspection for the completed applicable task or vessel’s return to service.

Task 7 Generator 400 Hour Service

Generator Service Checklist:

The original hard copy shall be provided to the Government representative at the time of final inspection for the completed applicable task or vessel’s return to service.

Task 8 Generator 2500 Hour Service (Add-On)

Generator Service Checklist:

The original hard copy shall be provided to the Government representative at the time of final inspection for the completed applicable task or vessel’s return to service.

Task 9 Multi-Point Vessel Inspection

Multi-Point Vessel Inspection Checklist:

The original hard copy shall be provided to the Government representative at the time of final inspection for the completed applicable task or vessel’s return to service.

Task 10 Vessel Sea Trial Vessel Sea Trial Checklist:

The original hard copy shall be provided to the Government representative at the time of final inspection for the completed applicable task or vessel’s return to service.

*Please Note: An electronic, scanned, or photographed copy shall be included as part of the invoice being submitted for payment to the Government.

6.0 Government-Furnished Property

The Government will provide the various checklist and the vessel for the contractor to use for the duration of the contract.

6.1 Services:

The Government will provide the name of the Contracting Officer (CO), and the Contracting Officers Representative (COR) for assistance with inspection and acceptance.

6.2 Facilities:

The Government will provide no facilities. Services shall be performed at the Contractors facility or at the dockside of the vessel located above under 5.3 of this performance work statement.

6.3 Utilities:

The Government will not provide any utilities. The Contractor shall instruct employees in utilities conservation practices. The contractor shall be responsible for operating under conditions that preclude the waste of utilities, which include turning off the water faucets or valves after using the required amount to accomplish cleaning vehicles and equipment.

6.4 Equipment:

The Government will provide the vessel Endeavor.

6.5 Materials:

Not applicable.

7.0 Applicable Publications (Current Editions):

• Cummins Marine Operation and Maintenance Manual https://www.cummins.com/manuals-and-technical-documents

• Twin Disc Marine Transmission Owner’s Manual http://www.twindisc.com/resources/literature/

• Northern Lights Operator’s Manual and Parts Manual https://www.northern-lights.com/technical-information/manuals/

8.0 Objectives:

a) Maintain engines, transmissions and generator in proper working order

b) Perform routine maintenance at manufacturer’s recommended intervals

c) Perform routine operational and safety inspections

9.0 Tasks:

The following service tasks will be ordered by the Government when service intervals are reached. The COR will contact the contractor to schedule an appointment. These tasks shall be invoiced at the price/rate stated in the contract for the relevant period of performance. The pricing for each task shall include all costs required to complete the task and provide the deliverable, including but not limited to any labor, materials, freight, disposal, haul out, storage, cleaning, lay days and work performed by a sub-contractor. All tasks shall be performed according to the manufacturer’s specifications and industry best practices.

The contractor shall perform the following tasks:

Task #1 - Initial Service At the beginning of this contract, the contractor shall perform an initial service on the vessel to address battery replacement, post break-in service, and to become familiarized with the vessel. Initial Service is expected to include but not limited to the following tasks, in no particular order:

Sub-Tasks:

a) Batteries o Replace Main Starting Batteries (Quantity: 4 - 8D AGM) o Replace House/Inverter Batteries (Quantity: 2 - 8D AGM) o Replace Generator Starting Batteries (Quantity: 1 - Group 31 AGM)

b) Mains (Port and Starboard) o Check Oil Level o Check Oil Condition o Top Up Oil o Clean Seawater Strainer o Check Coolant Level o Check Coolant Condition o Top Up Coolant o Drain Fuel Water Separator - Racor o Check Air Cleaner Assembly o Check Anode Condition - Heat Exchanger o Check Anode Condition - Aftercooler o Check Anode Condition - Transmission Oil Cooler o Check Anode Condition - Hydraulic Oil Cooler

c) Transmissions (Port and Starboard) o Change Transmission Oil o Replace Transmission Oil Filter o Check Transmission Oil Condition o Clean Suction Strainer Screen o Replace O-Rings and Seals o Check Transmission Oil Level o Top Up Transmission Oil

d) Generator o Change Engine Oil o Change Oil Filter o Clean Seawater Strainer o Check Coolant o Drain Fuel Water Separator - Racor o Adjust Valves o Adjust V-Belt Tension

Deliverables: Initial Service Checklist

Task #2 - 200 Hour Quick Service (Mains and Generator) For service visits requiring only an oil change, the contractor shall perform service at the vessel’s homeport, located in Antioch, CA. Prior to the technician’s arrival, the engines will be pre-warmed by the vessel operator. 200 Hour Quick Service is expected to include but not limited to the following tasks, in no particular order:

Sub-Tasks:

a) Mains (Port and Starboard) o Check Oil Level o Check Oil Condition o Change Engine Oil o Change Oil Filter o Change Oil Bypass Filter o Check Transmission Oil Level o Check Transmission Oil Condition o Top Up Transmission Oil o Clean Seawater Strainer o Check Coolant Level - Overflow Tank o Check Coolant Condition - Overflow Tank o Top Up Coolant - Overflow Tank o Drain Fuel Water Separator - Racor o Check Air Cleaner Assembly o Check Anode Condition - Heat Exchanger o Check Anode Condition - Aftercooler o Check Anode Condition - Transmission Oil Cooler o Check Anode Condition - Hydraulic Oil Cooler o Perform a visual inspection o Test Run at Dock - Startup and Idle

b) Generator o Check Oil Level and Condition o Change Engine Oil o Change Oil Filter o Clean Seawater Strainer o Check Coolant Level and Condition- Overflow Tank o Drain Fuel Water Separator - Racor o Check Air Cleaner o Perform a visual inspection o Test Run at Dock - Startup and under Load

Deliverable: 200 Hour Quick Service Checklist

Task #3 - Mains 500 Hour Service This service is expected to be performed at approximately every 500 service hours or annually if less, as measured by the engine’s hour meter. Both the port and starboard engines are expected to be serviced at the same time for convenience. Mains 500 Hour Service is expected to include but not limited to the following tasks, in no particular order:

Sub-Tasks:

a) Mains (Port and Starboard) o Change Engine Oil o Change Oil Filter o Change Oil Bypass Filter o Change Primary Fuel Filter (Racor) o Change Secondary Fuel Filter (On-Engine) o Service Air Filter o Replace Seawater Impeller o Replace Heat Exchanger Anodes o Replace Aftercooler Anodes o Replace Transmission Cooler Anodes o Top Up Engine Oil o Top Up Coolant o Top Up Transmission Fluid o Top Up Steering Fluid o Clean Seawater Strainer o Flush Heat Exchanger o Flush Aftercooler o Clean Battery Terminals/Connections o Tighten Battery Connections o Load Test Batteries o Update Engine Software o Check Engine Diagnostics for Fault Codes o Check for outstanding manufacturer Service Bulletins o Touch up engine paint

Deliverables: 500 Hour Service Checklist

Task #4 - Mains Overhead Set (Add-On) Overhead Set is expected to be performed at approximately every 1500 service hours, as measured by the engine’s hour meter.

It is intended to be an “add-on” service to the Mains 500 Hour Service. Both the port and starboard engines are expected to be serviced at the same time for convenience. Mains Overhead Set is expected to include but not limited to the following tasks in no particular order:

Sub-Tasks:

a) Mains (Port and Starboard) o Adjust Valve Lash

Deliverables: Complete Mains Overhead Set section of the 500 Hour Service Checklist

Task #5 - Mains Cooling System Flush (Add-On) Cooling system flush is expected to be performed at approximately every 2000 service hours or 4 years, as measured by the engine’s hour meter. It is intended to be an “add-on” service to the Mains 500 Hour Service. Both the port and starboard engines are expected to be serviced at the same time for convenience. Mains Cooling System Flush is expected to include but not limited to the following tasks in no particular order:

Sub-Tasks:

a) Mains (Port and Starboard) o Change Coolant o Flush Cooling System o Purge Air o Top Up

Deliverables: Complete Mains Cooling System Flush section of the 500 Hour Service Checklist

Task #6 - Transmission Service (Add-On) Transmission service is expected to be performed at approximately every 1000 service hours or six months. It is intended to be an “add-on” service to the Mains 500 Hour Service. Both the port and starboard transmissions are expected to be serviced at the same time for convenience. Transmission Service is expected to include but not limited to the following tasks in no particular order:

Sub-Tasks:

a) Transmissions (Port and Starboard) o Change Transmission Oil o Replace Transmission Oil Filter o Clean Suction Strainer Screen o Replace O-Rings and Seals o Grease Oil Seals o Perform Visual Inspection o Top Up Oil o Touch-Up Paint o Check for manufacturer service bulletins

Deliverables: Complete Transmission Service section of the 500 Hour Service Checklist

Task #7 - Generator 400 Hour Service Generator 400 Hour service is expected to be performed at approximately every 400 service hours or annually if less, as measured by the engine’s hour meter. Generator 400 Hour Service is expected to include but not limited to the following tasks in no particular order:

Sub-Tasks:

a) Generator o Change Engine Oil o Change Oil Filter o Change Primary Fuel Filter (Racor) o Change Secondary Fuel Filter (On-Engine) o Service Air Filter o Replace Seawater Impeller o Clean Seawater Strainer o Top Up Engine Oil o Top Up Coolant o Test Fuel Injectors o Clean Fuel Injectors o Adjust Valve Clearance o Adjust V-Belt Tension o Load Test Battery o Clean Battery Terminals/Connections o Tighten Battery Connections o Check for outstanding manufacturer Service Bulletins o Touch up paint

Deliverables: Generator Service Checklist

Task #8 - Generator 2500 Hour Service (Add-On) Generator 2500 hour service is expected to be performed every 2500 service hours as measured by the engine’s hour meter. It is intended to be an “add-on” service to the Generator 400 Hour Service. Generator 2500 Service is expected to include but not limited to the following tasks in no particular order:

Sub-Tasks:

a) Generator o Fuel Injection Pump - Check o Fuel Injection Pump - Clean o Fuel Injection Pump - Adjust o Cooling System - Drain o Cooling System - Flush o Cooling System - Fill o Heat Exchanger - Clean o Heat Exchanger – Inspect

Deliverables: Complete Generator 2500 Hour Service section of Generator Service Checklist

Task #9 - Multi-Point Vessel Inspection The Multi-Point Vessel Inspection is expected to be an operational and safety check, performed as part of scheduled maintenance. The contractor shall perform a visual inspection and/or operational test of the items listed below, in no particular order:

Sub-Tasks:

a) Lubrication - Mains o Oil Level o Oil Condition o Oil Leakage

b) Cooling - Mains o Coolant Level o Coolant Condition o Coolant Cap o Seawater Pump o Seawater Strainer o Hoses o Anodes o Heat Exchanger o Aftercooler o Coolant Leakage

c) Exhaust - Mains o Turbo o Wet Mixer o Muffler o Piping

d) Transmission - Mains o Oil Level o Oil Condition o Oil Leakage o Oil Cooler o Oil Cooler Anodes

e) Filters - Mains o Air Filter o Fuel Filter o Oil Filter o CCV Filter o Transmission Filter

f) Other - Mains o Belts o Pulleys o Guards o Vibration Damper o Valve Cover o Wiring Harnesses o Engine Mounts/Isolators o Engine Display o Engine Controls o Ignition Switches

g) Fuel o Fuel Tanks o Fuel Piping o Fuel Shutoff o Fuel Fills o Racor Filters

h) Driveline o Couplings o Shafts o Shaft Log/Seals

i) Steering System o Helm Pumps o Rudder Assembly o Cylinder o Piping

j) Generator o Oil Level o Oil Condition o Oil Filter o Coolant Level o Coolant Condition o V-Belt o Hoses/Clamps o Coolant Cap o Heat Exchanger o Exhaust System o Air Filter o Fuel Filter o Fuel Piping/Valves o Fluid Leakage o Seawater Pump o Seawater Strainer o Alternator o Starter o Engine Mounts

k) Electrical o Batteries - Starting o Batteries - House o Batteries - Thruster o Battery Charger - Starting o Inverter/Charger - House o Battery Charger - Thruster o Battery Cables/Connections o Navigation Lights o Deck Lights o Interior Lights o GPS o Radar o Sonar o VHFs o Hailer o Whistle/Horn o Bow Thruster o Shorepower o Electrical Bonding

l) HVAC o Unit #1 Pilothouse o Unit #2 Lab o Cooling System

m) Hydraulics o Crane & Winch o Davit & Winch o Windlass o Hydraulic System o Heat Exchanger Anode

n) Plumbing o Head System o Freshwater System o Washdown o Sampling System o Bilge Pumps o Clutch Pumps

Deliverables: Multi-Point Inspection Checklist

Task #10 - Vessel Sea Trial The contractor shall perform a Vessel Sea Trial, at the request of the Government. The Sea Trial is expected to be an operational and safety check, performed as part of scheduled maintenance. The contractor shall perform an on-the-water test of the items listed below, in no particular order:

Sub-Tasks:

a) Startup @ Idle Cold o RPMs o Engine Load % o Oil Pressure o Coolant Temperature o Transmission Temperature o Transmission Pressure o Boost Pressure o Voltage o Fuel Rate o Faults/Alarm o Exhaust o Cooling Water Discharge o Display o Ignition Switches o Engine Controls o Cranking

b) Cruise - In Gear @ Temp.

o GPS Speed o RPMs o Engine Load % o Oil Pressure o Coolant Temperature o Transmission Temperature o Transmission Pressure o Boost Pressure o Voltage o Fuel Rate o Faults/Alarm o Exhaust o Cooling Water Discharge

c) WOT - In Gear @ Temp.

o GPS Speed o RPMs o Engine Load % o Oil Pressure o Coolant Temperature o Transmission Temperature o Transmission Pressure o Boost Pressure o Voltage o Fuel Rate o Faults/Alarm o Exhaust o Cooling Water Discharge

d) Post Sea Trial - Idle o RPMs o Engine Load % o Oil Pressure o Coolant Temperature o Transmission Temperature o Transmission Pressure o Boost Pressure o Voltage o Fuel Rate o Faults/Alarm o Exhaust o Cooling Water Discharge o Shutdown

e) Other o Engine Controls o Steering o Thruster o Hydraulics

f) Generator - Startup o Oil Pressure o Coolant Temperature o DC Voltage o Faults/Alarm o Exhaust o Cooling Water Discharge o Gauges o Ignition Switches o Cranking

g) Generator - Under Load o Oil Pressure o Coolant Temperature o DC Voltage o AC Voltage o Faults/Alarm o Exhaust o Cooling Water Discharge o Gauges o Ignition Switches o Shutdown

Deliverables: Vessel Sea Trial Checklist

10.0 Performance Assessment and Disincentives

(a) Monitoring Performance. During the course of the evaluation period, the COR will track Contractor performance.

Interim (mid-term) evaluations may be provided to identify strengths and weaknesses in the Contractor's performance during the period being evaluated. At the end of the period, the COR will assess the Contractor's performance in accordance with the Quality Assurance Surveillance Plan (QASP) and report to the Contracting Officer.

(b) Contractor Self-Assessment. Following each evaluation period, the Contractor may provide a written self-assessment of its performance to the COR to be considered in its report to the Contracting Officer. The self-assessment shall be submitted not later than 5 working days after the end of each evaluation period. The self-evaluation shall not exceed 1 page per PRS element. The self-assessment shall address both the strengths and weaknesses of the Contractor's performance during the evaluation period. Where deficiencies in performance are noted, the Contractor shall describe the actions planned or taken to correct such deficiencies and avoid their recurrence. The self-assessment itself will NOT be the basis for the Disincentives determination.

(c) COR Recommendation. The COR will consider all evaluations and any other pertinent information, including

Contractor self-assessment, and will prepare a report to the Contracting Officer with findings and recommendations. The Contractor will be provided a copy of the draft findings and recommendations of the COR and will be afforded the opportunity to identify factual errors. The COR's draft recommendation is not subject to negotiation and the COR will not engage in discussions with the Contractor. Any errors identified by the Contractor will be addressed by the COR in its final report. The Contractor will be provided a copy of the final COR report at the same time the report is submitted to the Contracting Officer.

(d) Payment Determination. The Contracting Officer may meet with the COR to discuss the COR's report. The Contracting

Officer will make a final determination in writing as to the percentage of work successfully completed, and the resulting payment to be made. A copy of the determination will be provided to the Contractor no later than 45 calendar days after the end of the period being evaluated. All Contracting Officer decisions regarding Disincentives are unilateral decisions made solely at the discretion of the Government.

(e) Deduction. Notwithstanding any other clause of this contract, deduction of the Disincentive will be made within the later of 60 days after the end of the evaluation period or 30 days after receipt of an approved invoice.

(f) The Quality Assurance Surveillance Plan is one evaluation method the government uses to surveillance performance to determine whether the Contractor meets the standards of performance as defined in the PWS. The absence of a QASP for any contract requirement, however, shall not detract from its enforceability or limit the rights or remedies of the government under any other provision of the contract in determining the quality of the Contractor performance.

11.0 Attachment/Technical Exhibit List

11.1 Initial Service Checklist

11.2 200 Hour Quick Service Checklist

11.3 Mains 500 Hour Service Checklist

11.4 Generator Service Checklist

11.5 Multi-Point Vessel Inspection Checklist

11.6 Vessel Sea Trial Checklist

PERFORMANCE REQUIREMENTS SUMMARY AND

QUALITY ASSURANCE SURVIELLANCE PLAN (QASP)

Performance Requirement Summary

(PRS)

Acceptable Quality Level Method of Surveillance

Disincentive

Deliverables:

1. Initial Service Checklist

2. 200 Hour Quick Service Checklist

3. Mains 500 Hour Service Checklist

4. Generator Service Checklist

5. Multi-Point Vessel Inspection

Checklist

6. Vessel Sea Trial Checklist

Timeliness: No more than 3 incidences of Complaints where the Deliverables are not provided on-time.

Quality: No more than 3 incidences of Deliverables being returned to the contractor for incompleteness.

Timeliness – Customer Complaint

Quality:

Random Sampling (inspection of checklists)

Suspension or termination of contract until such time as Deliverables provided are to the satisfaction of the COR and Contracting Officer

Tasks

1. Initial Service

2. 200 Hour Quick Service

3. Mains 500 Hour Service

4. Mains Overhead Set

5. Mains Cooling System Flush

6. Transmission Service

7. Generator 400 Hour Service

8. Generator 2500 Hour Service

9. Multi-Point Vessel Inspection

10. Vessel Sea Trial

Timeliness: No more than 3 incidences of Complaints where the vessel is not ready for return to service as scheduled and agreed.

Quality: No more than 3 incidences of Tasks requiring re-performance

Timeliness - Customer Complaint

Quality - Random Sampling (inspection of work)

Suspension or termination of contract until such time as Deliverables provided are to the satisfaction of the COR and Contracting Officer

SOLICITATION CLAUSES AND PROVISIONS

TABLE OF CONTENTS

COMMERCIAL CLAUSES

1 52.252-2 Clauses Incorporated by Reference 20 2 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive

Orders -- Commercial Items

3 52.217-8 – Option to Extend Services 26 4 52.217-9 Option to Extend the Term of the Contract 27 5 1452.201-70 Authorities and Delegations 27 6 1452.228-70 – Liability Insurance 28 7 DOI-AAAP-0028 Electronic Invoicing and Payment Requirements – Invoice Processing

Platform

8 WBR 1452.223-81 – Safety and Health – Bureau of Reclamation 29

9 WBR 1452.223-82 Protecting Federal Employees and the Public from Exposure to Tobacco Smoke in the Federal Workplace – Bureau of Reclamation

10 WBR 1452-237-80 Security Requirements – Bureau of Reclamation 30

PROVISIONS

1 52.252-1 Solicitation Provisions Incorporated by Reference 32 2 52.212-1 Addendum Instructions to Offerors – Commercial Items 33 3 52.212-2 Evaluation – Commercial Items 33 4 52.216-1 Type of Contract 35 5 52.-217-5 - Evaluation of Options 35 6 1452.215-71 Use and Disclosure of Proposal Information—Department of the Interior 35 7 WBR 1452-222-80 Notice of Applicability – Cooperation with Authorities and Remedies –

Child Labor – Bureau of Reclamation

8 WBR 1452.225-82 Notice of World Trade Organization Government Procurement Agreement Evaluations--Bureau of Reclamation

CLAUSES

COMMERCIAL CLAUSES

1 52.252-2 Clauses Incorporated by Reference February 1998

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text.

Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://www.acquisition.gov/far/ http://farsite.hill.af.mil/

Clauses Title Date 52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper MAY 2011 52.212-4 Contract Terms and Conditions – Commercial Item OCT 2018 52.223-1 Biobased Product Certification MAY 2012 52.223-3 Hazardous Material Identification and Material Safety Data JAN 1997 52.223-5 Alt I Pollution Prevention and Right-to-Know Information MAY 2011 52.223-10 Waste Reduction Program MAY 2011 52.228-5 Insurance – Work on a Government Installation JAN 1997 52.232-40 Providing Accelerated Payments to Small Business Subcontractors DEC 2013 52.237-2 Protection of Government Buildings, Equipment, and Vegetation APR 1984 52.242-15 Stop – Work Order AUG 1989

(End of clause)

2 52.212-05 Contract Terms and Conditions Required to Implement Statutes or

Executive Orders -- Commercial Items January 2019

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and

Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)

(4) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(5) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-78 (19 U.S.C.

3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub L. 111-5) (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009).

_X__ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2018) (Pub. L. 109-

282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L.

111-117, section 743 of Div. C).

_X__ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Oct 2015) (31 U.S.C. 6101 note).

___ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C.

2313).

___ (10) [Reserved]

___ (11) (i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15 U.S.C. 657a).

___ (ii) Alternate I (Nov 2011) of 52.219-3.

___ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer)(15 U.S.C. 657a).

___ (ii) Alternate I (Jan 2011) of 52.219-4.

___ (13) [Reserved]

_X__ (14) (i) 52.219-6, Notice of Total Small Business Aside (Nov 2011) (15 U.S.C. 644).

___ (ii) Alternate I (Nov 2011).

___ (iii) Alternate II (Nov 2011).

___ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

___ (ii) Alternate I (Oct 1995) of 52.219-7.

___ (iii) Alternate II (Mar 2004) of 52.219-7.

___ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)).

___ (17) (i) 52.219-9, Small Business Subcontracting Plan (Aug 2018) (15 U.S.C. 637 (d)(4)).

___ (ii) Alternate I (Nov 2016) of 52.219-9.

___ (iii) Alternate II (Nov 2016) of 52.219-9.

___ (iv) Alternate III (Nov 2016) of 52.219-9.

___ (v) Alternate IV (Aug 2018) of 52.219-9.

_X__ (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15 U.S.C. 644(r)).

___ (19) 52.219-14, Limitations on Subcontracting (Jan 2017) (15 U.S.C. 637(a)(14)).

___ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

___ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011) (15 U.S.C.

657f).

_X__ (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C. 632(a)(2)).

___ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).

___ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).

_X__ (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

___ (26) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Jan 2018) (E.O. 13126).

_X__ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

_X__ (28) (i) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

___ (ii) Alternate I (Feb 1999) of 52.222-26.

___ (29) (i) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

___ (ii) Alternate I (July 2014) of 52.222-35.

_X__ (30) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

___ (ii) Alternate I (July 2014) of 52.222-36.

___ (31) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

___ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496).

_X__ (33) (i) 52.222-50, Combating Trafficking in Persons (JAN 2019)

(22 U.S.C. chapter 78 and E.O. 13627).

___ (ii) Alternate I (Mar 2015) of 52.222-50, (22 U.S.C. chapter 78 and E.O. 13627).

___ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

_X__ (35) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

___ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

___ (36) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O.13693).

___ (37) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (Jun 2016) (E.O. 13693).

___ (38) (i) 52.223-13, Acquisition of EPEAT® -Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514

___ (ii) Alternate I (Oct 2015) of 52.223-13.

___ (39) (i) 52.223-14, Acquisition of EPEAT® -Registered Television (Jun 2014) (E.O.s 13423 and 13514).

___ (ii) Alternate I (Jun 2014) of 52.223-14.

___ (40) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

___ (41) (i) 52.223-16, Acquisition of EPEAT® -Registered Personal Computer Products (Oct 2015) (E.O.s 13423 and 13514).

___ (ii) Alternate I (Jun 2014) of 52.223-16.

_X__ (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving (Aug 2011) (E.O.

13513).

___ (43) 52.223-20, Aerosols (Jun 2016) (E.O. 13693).

___ (44) 52.223-21, Foams (Jun 2016) (E.O. 13696).

___ (45) (i) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

___ (ii) Alternate I (Jan 2017) of 52.224-3.

_X__ (46) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

_X__ (47) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108- 78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43).

___ (ii) Alternate I (May 2014) of 52.225-3.

___ (iii) Alternate II (May 2014) of 52.225-3.

___ (iv) Alternate III (May 2014) of 52.225-3.

___ (48) 52.225-5, Trade Agreements (Aug 2018) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

_X__ (49) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

___ (50) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

___ (51) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

___ (52) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

___ (53) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505), 10 U.S.C.

2307(f)).

___ (54) 52.232-30, Installment Payments for Commercial Items (Jan 2017) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

_X__ (55) 52.232-33, Payment by Electronic Funds Transfer--System for Award Management (Oct 2018) (31 U.S.C.

3332).

___ (56) 52.232-34, Payment by Electronic Funds Transfer—Other Than System for Award Management (Jul 2013) (31 U.S.C. 3332).

___ (57) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

___ (58) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

_X__ (59) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(12)).

___ (60) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631).

___ (ii) Alternate I (Apr 2003) of 52.247-64.

___ (iii) Alternate II (Feb 2006) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or executive orders applicable to acquisitions of commercial items:

_X__ (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495)

_X__ (2) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67.).

_X__ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

This Statement is for information only:

It is not a Wage Determination

Employee Class Sacramento – Fringe Benefits GS-9 Step 5 $27.58

_X__ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) (29 U.S.C.206 and 41 U.S.C. chapter 67).

___ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

___ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67).

___ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67).

_X__ (8) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).

_X__ (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

___ (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792).

(d) Comptroller General Examination of Record The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)

(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c) and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Jan 2019) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and

Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(iv) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(v) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (1) of FAR clause 52.222-17.

(vi) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vii) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

(viii) 52.222-35, Equal Opportunity for Veterans (Oct 2019) (38 U.S.C. 4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(x) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xii) 52.222-41, Service Contract Labor Standards (Aug 2018), (41 U.S.C. chapter 67).

(xiii) (A) 52.222-50, Combating Trafficking in Persons (Jan 2019) (22 U.S.C. chapter 78 and E.O. 13627).

(B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 E.O. 13627).

(xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xvi) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).

(xvii) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015).

(xviii) 52.222-62, Paid sick Leave Under Executive Order 13706…