STRI__Install_accessable_drinking_fountain_with_pet_bowl_Scope_of_Work.pdf

Stones River National Battlefield

3501 Old Nashville Hwy Murfreesboro TN. 37129

Install new ADA drinking fountain with pet bowl at Visitor Center

The vendor will provide the labor, equipment, materials, parts and supplies to install one LK4420DBEVG Elkay Outdoor Bi-level Pedestal Fountain with pet station non filtered non refrigerated drinking fountain evergreen color at the Visitor center for

Stones River National Battlefield at Murfreesboro, Tennessee.

GENERAL INFORMATION

1.0 Purpose

1.1 Stones River National Battlefield intends to have one (1) drinking fountain with pet access bowl and concrete pad installed at the visitor center.

1.2 Stones River National Battlefield will award to a single source vendor a fixed price payment to rehabilitate the above-mentioned drinking fountain.

1.3 The vendor will provide the labor, equipment, materials, parts, and supplies.

2.0 Details

2.1

2.2

2.3

2.4 2.5

2.6

2.7

Vendor tie into existing water line at the freeze proof hose bib next to the build by the southwest exit door. Then trench approximately

66 LF to the site for the pad. And create a french drain within the trench.

Contractor shall ensure there is a drain valve installed so that the drinking fountain water line can be shut off and drained each fall to winterize the unit.

Contractor shall ensure the water line that is installed is to code. Thus, supply water to the fountain is below the frost line so as not to freeze during the winter.

Contractor must comply with all pertinent accessibility requirements.

Contractor shall use proper schedule PVC for the supply line.

Contractor shall ensure there is proper drainage for the drinking fountain.

Contractor shall level out and reseed any ground disturbance from digging the trench for the water line and the approximately 64SF concrete pad for the drinking fountain to be mounted to.

3.0 Submittals

3.1 Contractor shall provide spec sheets for equipment and materials used for this project.

4.0 Payment

4.1 Payment will be one lump sum

SPECIFICATIONS

Elkay Outdoor Bi-Level Pedestal Fountain with Pet Station Non- Filtered Non-Refrigerated

Model LK4420DB

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user.

When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 06292023 1-800-260-6640 | SVtechservice@Elkay.com © 2023 Page 1 LK4420DB Patent zurn-elkay.com/patents LK4420DB_spec.pdf

PRODUCT SPECIFICATIONS

Elkay Outdoor Bi-Level Pedestal Fountain with Pet Station Non-Filtered Non-Refrigerated. Features shall include 316 Stainless, Heavy Duty Vandal Resistant, Pet Fountain. Furnished with Vandal Resistant bubbler. Mechanical Front Bubbler Button activation. Product shall be Floor Mount/Freestanding, for Outdoor applications, serving 2 station(s).

Special Features: 316 Stainless, Heavy Duty Vandal Resistant, Pet Fountain

Finish: Black (BK), Blue (BLU), Evergreen (EVG), Gray (GRY), Powder Coat (12 Color Options)

Power: No Electrical Required

Bubbler Style: Vandal Resistant

Activation by: Mechanical Front Bubbler Button

Mounting Type: Floor Mount/Freestanding

Chilling Capacity: Non-refrigerated

Dimensions (L x W x H): 31" x 26" x 40-5/16"

Approx. Shipping Weight: 170 lbs.

Installation Location: Outdoor

No. of Stations Served: 2

**When used in non-temperature controlled environments, unit(s) must be adequately winterized and/or protected from extreme heat to prevent damage where climates dictate.

Mechanically-Activated bubbler continues to supply water in event of service disruptions.

Base material constructed from marine-grade 316 stainless steel provides the ultimate corrosion protection from even the most corrosive elements.

Pet Fountain: Features slow drainage for easy drinking.

Included with Product: Outdoor Fountain Ships in one box.

A Century of Tradition and Quality.

For more than 100 years, Elkay has been making innovative products and providing exceptional customer care. We take pride in offering plumbing products that make life easier, inspire change and leave the world a better place.

PRODUCT COMPLIANCE

ADA & ICC A117.1

ASME A112.19.3/CSA B45.4

Buy American Act

NSF/ANSI 61 & 372 (lead free)

Installation Instructions (PDF) - 1000003946

Warranty pertains to drinking water applications only. Non-drinking water applications are not covered under warranty.

Warranty (PDF)

PART:________________________________QTY: _____________

PROJECT:______________________________________________

CONTACT:______________________________________________

DATE:__________________________________________________

NOTES:_________________________________________________

APPROVAL:_____________________________________________

PAGE 1 1000003946 (Rev. A - 06/17)

4420DB_FTN_A LK4420DB_FTN_A

Owners Manual Model 4420DB

Bi-Level Tubular Fountain with Pet Fountain

INSTALLER

4420DB Fountains are among the easiest to install Fountains on the market today.

To assure you install these models easily and correctly, PLEASE READ THESE

SIMPLE INSTRUCTIONS BEFORE STARTING THE INSTALLATION. CHECK YOUR

INSTALLATION FOR COMPLIANCE WITH PLUMBING, ELECTRICAL, AND OTHER

APPLICABLE CODES. After installation, leave these instructions with the Fountain for future reference.

PAGE 21000003946 (Rev. A - 06/17)

1. This fountain is to be mounted on a smooth, flat, finished surface with adequate support structure. NOTE: Mounting structure must be capable of supporting 300 lb. load on fountain.

2. Refer to rough-in for plumbing.

3. Install shut-off valve on water supply. (Valve not furnished)

4. Locate and install fountain using 3/8" minimum fasteners. (Fasteners not furnished)

5. Connect water supply and fountain drain. Connect drain waste "Tee" to fountain drain tubes. Connect outlet of "Tee" to drainage system. Water connection and drain must comply with local codes.

6. Turn on water supply and check all connections for leaks.

CAUTION: This fountain is rated for inlet water pressure of 20-105 PSI. A pressure reducing regulator should be used if the inlet water supply exceeds 105 PSI. Any damage caused by reason of connecting this product to supply line pressures lower than 20 PSI or higher than 105 PSI is not covered by warranty.

7. Water supply 3/8" O.D. unplated copper tube. Waste 1-1/2" IPS. Contractor to supply waste trap and service stop valve in accordance with local code.

8. Connecting lines to be made of unplated copper and should be thoroughly flushed to remove all foreign matter before being connected to fountain. This fountain is manufactured in such a manner that it does not in any way cause taste, odor, color, or sediment problems.

9. Connect fountain to supply line with a shut-off valve and install a 3/8" unplated copper water line between the valve and the fountain. Remove any burrs from outside of water line. Push the tubes straight into the fittings until they reach a positive stop, approximately 3/4" (See Fig. 2). DO NOT SOLDER TUBES INSERTED INTO THE STRAINER AS DAMAGE TO THE

O-RINGS MAY RESULT.

INSTALLATION INSTRUCTIONS

IMPORTANT

ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSON

IMPORTANT! INSTALLER PLEASE NOTE.

THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC. TO WATER LINES IS A COMMON PROCEDURE. THIS GROUNDING MAY BE IN THE BUILDING OR MAY OCCUR AWAY FROM THE BUILDING. THIS GROUNDING CAN CAUSE ELECTRICAL FEEDBACK INTO A FOUNTAIN, CREATING AN ELECTROLYSIS WHICH CAUSES A METALLIC TASTE OR AN INCREASE IN THE METAL CONTENT OF THE WATER. THIS CONDITION IS AVOIDABLE BY USING THE PROPER MATERIALS AS INDICATED. ANY DRAIN FITTINGS PROVIDED BY THE INSTALLER SHOULD BE MADE OF PLASTIC TO ELECTRICALLY ISOLATE THE

FOUNTAIN FROM THE BUILDING PLUMBING SYSTEM.

PAGE 3 1000003946 (Rev. A - 06/17)

/8

9m m33

/1 6"

0m m

4m m O

4m m O

3m m

9/

7m m

/1 6" m m

O

RI

FA

CE

HE

IG

HT

/1

6"

8m m

O

RI

FA

CE

HE

IG

HT

8" 20 3m m

2m m

4m m O

/1 6" m m

A

1- 1/

2" D

RA

IN

B

B

C

7m m

0m m

O

6m m

(2 P

L )

O 1/

2" m m

(8 P

L)

O

5m m

B.

C.

(2 P

L)

LE

G

EN

D

A

3/ 8"

O .D

. U N

PL

AT

ED

C

O

PP

ER

T

U B

E C

O N

N

EC

T

- S

H U

T O

FF

V

A

LV

E B

Y O

TH

ER

S B

A

C C

ES

S

PA

N

EL

8" X

0"

C

R

EM

O

VA

B

LE

B

O

TT

O M

C O

VE

R

* A D

A R

E Q

U

IR

E M

E N

T

FI

N

IS

H

E D

FL

O O

R

PAGE 41000003946 (Rev. A - 06/17)

See Fig. 3

See Fig. 3

PAGE 5 1000003946 (Rev. A - 06/17)

ITEM

NO.

PART NO.

98683C 98682C

1000003694 1000003695 0000000325

98530C 45726C 97247C 28467C 40551C 97446C

0000000466 101570540560 1000003812* 1000003813*

45926C 70852C 66346C 55996C 98684C 45724C

1000003490 56092C

ITEMIZED PARTS LIST

NS

NS

Kit - Drain Adapter/Gasket/Nut/Washer Kit - Push Button w/Blank Nameplate Kit - Push Button w/LK4420DB Nameplate Kit - Push Button w/4420DB Nameplate Kit - Drain Plug & Gasket Kit - Regulator/Holder/Nut Plug - Drain Kit - VR Torx Screws/Bit Basin Tailpipe Kit-Bubbler (VR) Kit - Bubbler (Dog Bowl) Gasket Access Panel Bottom Cover Drain Tube Tee - 3/8" Drain Tube In - Line Strainer Kit - Drain Elbow/Nut/Washer/Gasket Tailpipe - 10" Lg.

Tube - Drain Tubing-1/4" Poly (Cut To Length)

DESCRIPTION

TROUBLE SHOOTING AND MAINTENANCE

STREAM HEIGHT ADJUSTMENT:

Stream height is factory set at 35 PSI. If supply pressure varies greatly from this, insert a small straight bladed screwdriver through the access hole in the center of the push button and turn the adjustment screw. Clockwise adjustment will raise the stream and counterclockwise adjustment will lower the stream. For best adjustment, the stream should be approximately 1 1/2" above the top of the bubbler . (See Fig. 4)

ACTUATION OF QUICK CONNECT WATER FITTINGS:

Fountain is provided with lead-free connectors which utilize an o-ring water seal. To remove tubing from the fitting, relieve water pressure, push in on the gray collar while pulling on the tubing. (see Fig.2) To insert tubing, push tube straight into fitting until it reaches a positive stop, approximately 3/4".

FIG. 4

PRINTED IN U.S.A.

Halsey Taylor – halseytaylor.com Elkay – elkay.com

FOR PARTS CONTACT YOUR LOCAL DISTRIBUTOR OR CALL TECHNICAL SERVICES AT 1.800.834.4816

2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523

NS = Not Shown *select color option to complete part number

*FINISH COLOR OPTIONS – Choose color option to complete your model number, add as suffix example:

4420DBEVG

Matte finish: Evergreen = EVG Gloss finish:

Beige = BGE Gray = GRY Terracotta = TER Black = BLK Orange = ORN White = WHT Blue = BLU Purple = PUR Yellow = YLW Brown = BRN Red = RED

FIG. 2

B CA

SIMPLY PUSH IN

TUBE TO ATTACH

TUBE IS SECURED

IN POSITION

PUSH IN COLLET

TO RELEASE TUBE

OPERATION OF QUICK CONNECT FITTINGS

PUSHING TUBE IN BEFORE

PULLING IT OUT HELPS TO

RELEASE TUBE

OPERATION OF QUICK CONNECT FITTINGS

SIMPLY PUSH IN

TUBE TO ATTACH

TUBE IS SECURED

IN POSITION

PUSH IN COLLET

TO RELEASE TUBE

PUSHING TUBE IN BEFORE

PULLING IT OUT HELPS TO

RELEASE TUBE

A B C

FIG. 1

NOTE: WATER FLOW

DIRECTION

BUILDING WATER INLET

SERVICE STOP

(NOT FURNISHED)

1/4" O.D. TUBE

WATER INLET

TO COOLER

3/8" O.D. UNPLATED COP-

PER TUBE CONNECT

COLD WATER SUPPLY

Vandal-Resistant Bubbler

FIG. 3

BASIN

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user.

When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 06292023 1-800-260-6640 | SVtechservice@Elkay.com © 2023 Page 2 LK4420DB Patent zurn-elkay.com/patents LK4420DB_spec.pdf

Optional Accessories

LK4471LHB

Locking Hose Bib

Spec Sheet (PDF)

97890C Accessory - Direct Bury Adaptor

Spec Sheet (PDF)

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user.

When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 06292023 1-800-260-6640 | SVtechservice@Elkay.com © 2023 Page 3 LK4420DB Patent zurn-elkay.com/patents LK4420DB_spec.pdf